Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 434 insertions, 0 deletions

diff --git a/drivers/media/radio/radio-sf16fmr2.c b/drivers/media/radio/radio-sf16fmr2.c
new file mode 100644
index 000000000000..0732efda6a98
--- /dev/null
+++ b/drivers/media/radio/radio-sf16fmr2.c
@@ -0,0 +1,434 @@
+/* SF16FMR2 radio driver for Linux radio support
+ * heavily based on fmi driver...
+ * (c) 2000-2002 Ziglio Frediano, freddy77@angelfire.com
+ *
+ * Notes on the hardware
+ *
+ *  Frequency control is done digitally -- ie out(port,encodefreq(95.8));
+ *  No volume control - only mute/unmute - you have to use line volume
+ *
+ *  For read stereo/mono you must wait 0.1 sec after set frequency and
+ *  card unmuted so I set frequency on unmute
+ *  Signal handling seem to work only on autoscanning (not implemented)
+ */
+
+#include <linux/module.h>	/* Modules 			*/
+#include <linux/init.h>		/* Initdata			*/
+#include <linux/ioport.h>	/* check_region, request_region	*/
+#include <linux/delay.h>	/* udelay			*/
+#include <asm/io.h>		/* outb, outb_p			*/
+#include <asm/uaccess.h>	/* copy to/from user		*/
+#include <linux/videodev.h>	/* kernel radio structs		*/
+#include <asm/semaphore.h>
+
+static struct semaphore lock;
+
+#undef DEBUG
+//#define DEBUG 1
+
+#ifdef DEBUG
+# define  debug_print(s) printk s
+#else
+# define  debug_print(s)
+#endif
+
+/* this should be static vars for module size */
+struct fmr2_device
+{
+	int port;
+	int curvol; /* 0-65535, if not volume 0 or 65535 */
+	int mute;
+	int stereo; /* card is producing stereo audio */
+	unsigned long curfreq; /* freq in kHz */
+	int card_type;
+	__u32 flags;
+};
+
+static int io = 0x384;
+static int radio_nr = -1;
+
+/* hw precision is 12.5 kHz
+ * It is only usefull to give freq in intervall of 200 (=0.0125Mhz),
+ * other bits will be truncated
+ */
+#define RSF16_ENCODE(x)	((x)/200+856)
+#define RSF16_MINFREQ 87*16000
+#define RSF16_MAXFREQ 108*16000
+
+static inline void wait(int n,int port)
+{
+	for (;n;--n) inb(port);
+}
+
+static void outbits(int bits, unsigned int data, int nWait, int port)
+{
+	int bit;
+	for(;--bits>=0;) {
+		bit = (data>>bits) & 1;
+		outb(bit,port);
+		wait(nWait,port);
+		outb(bit|2,port);
+		wait(nWait,port);
+		outb(bit,port);
+		wait(nWait,port);
+	}
+}
+
+static inline void fmr2_mute(int port)
+{
+	outb(0x00, port);
+	wait(4,port);
+}
+
+static inline void fmr2_unmute(int port)
+{
+	outb(0x04, port);
+	wait(4,port);
+}
+
+static inline int fmr2_stereo_mode(int port)
+{
+	int n = inb(port);
+	outb(6,port);
+	inb(port);
+	n = ((n>>3)&1)^1;
+	debug_print((KERN_DEBUG "stereo: %d\n", n));
+	return n;
+}
+
+static int fmr2_product_info(struct fmr2_device *dev)
+{
+	int n = inb(dev->port);
+	n &= 0xC1;
+	if (n == 0)
+	{
+		/* this should support volume set */
+		dev->card_type = 12;
+		return 0;
+	}
+	/* not volume (mine is 11) */
+	dev->card_type = (n==128)?11:0;
+	return n;
+}
+
+static inline int fmr2_getsigstr(struct fmr2_device *dev)
+{
+	/* !!! work only if scanning freq */
+	int port = dev->port, res = 0xffff;
+	outb(5,port);
+	wait(4,port);
+	if (!(inb(port)&1)) res = 0;
+	debug_print((KERN_DEBUG "signal: %d\n", res));
+	return res;
+}
+
+/* set frequency and unmute card */
+static int fmr2_setfreq(struct fmr2_device *dev)
+{
+	int port = dev->port;
+	unsigned long freq = dev->curfreq;
+
+	fmr2_mute(port);
+
+	/* 0x42 for mono output
+	 * 0x102 forward scanning
+	 * 0x182 scansione avanti
+	 */
+	outbits(9,0x2,3,port);
+	outbits(16,RSF16_ENCODE(freq),2,port);
+
+	fmr2_unmute(port);
+
+	/* wait 0.11 sec */
+	msleep(110);
+
+	/* NOTE if mute this stop radio
+	   you must set freq on unmute */
+	dev->stereo = fmr2_stereo_mode(port);
+	return 0;
+}
+
+/* !!! not tested, in my card this does't work !!! */
+static int fmr2_setvolume(struct fmr2_device *dev)
+{
+	int i,a,n, port = dev->port;
+
+	if (dev->card_type != 11) return 1;
+
+	switch( (dev->curvol+(1<<11)) >> 12 )
+	{
+	case 0: case 1: n = 0x21; break;
+	case 2: n = 0x84; break;
+	case 3: n = 0x90; break;
+	case 4: n = 0x104; break;
+	case 5: n = 0x110; break;
+	case 6: n = 0x204; break;
+	case 7: n = 0x210; break;
+	case 8: n = 0x402; break;
+	case 9: n = 0x404; break;
+	default:
+	case 10: n = 0x408; break;
+	case 11: n = 0x410; break;
+	case 12: n = 0x801; break;
+	case 13: n = 0x802; break;
+	case 14: n = 0x804; break;
+	case 15: n = 0x808; break;
+	case 16: n = 0x810; break;
+	}
+	for(i=12;--i>=0;)
+	{
+		a = ((n >> i) & 1) << 6; /* if (a=0) a= 0; else a= 0x40; */
+		outb(a|4, port);
+		wait(4,port);
+		outb(a|0x24, port);
+		wait(4,port);
+		outb(a|4, port);
+		wait(4,port);
+	}
+	for(i=6;--i>=0;)
+	{
+		a = ((0x18 >> i) & 1) << 6;
+		outb(a|4, port);
+		wait(4,port);
+		outb(a|0x24, port);
+		wait(4,port);
+		outb(a|4, port);
+		wait(4,port);
+	}
+	wait(4,port);
+	outb(0x14, port);
+
+	return 0;
+}
+
+static int fmr2_do_ioctl(struct inode *inode, struct file *file,
+                      unsigned int cmd, void *arg)
+{
+	struct video_device *dev = video_devdata(file);
+	struct fmr2_device *fmr2 = dev->priv;
+	debug_print((KERN_DEBUG "freq %ld flags %d vol %d mute %d "
+		"stereo %d type %d\n",
+		fmr2->curfreq, fmr2->flags, fmr2->curvol, fmr2->mute,
+		fmr2->stereo, fmr2->card_type));
+
+	switch(cmd)
+	{
+		case VIDIOCGCAP:
+		{
+			struct video_capability *v = arg;
+			memset(v,0,sizeof(*v));
+			strcpy(v->name, "SF16-FMR2 radio");
+			v->type=VID_TYPE_TUNER;
+			v->channels=1;
+			v->audios=1;
+			return 0;
+		}
+		case VIDIOCGTUNER:
+		{
+			struct video_tuner *v = arg;
+			int mult;
+
+			if(v->tuner)     /* Only 1 tuner */
+				return -EINVAL;
+			strcpy(v->name, "FM");
+			mult = (fmr2->flags & VIDEO_TUNER_LOW) ? 1 : 1000;
+			v->rangelow = RSF16_MINFREQ/mult;
+			v->rangehigh = RSF16_MAXFREQ/mult;
+			v->flags = fmr2->flags | VIDEO_AUDIO_MUTABLE;
+			if (fmr2->mute)
+				v->flags |= VIDEO_AUDIO_MUTE;
+			v->mode=VIDEO_MODE_AUTO;
+			down(&lock);
+			v->signal = fmr2_getsigstr(fmr2);
+			up(&lock);
+			return 0;
+		}
+		case VIDIOCSTUNER:
+		{
+			struct video_tuner *v = arg;
+			if (v->tuner!=0)
+				return -EINVAL;
+			fmr2->flags = v->flags & VIDEO_TUNER_LOW;
+			return 0;
+		}
+		case VIDIOCGFREQ:
+		{
+			unsigned long *freq = arg;
+			*freq = fmr2->curfreq;
+			if (!(fmr2->flags & VIDEO_TUNER_LOW))
+				*freq /= 1000;
+			return 0;
+		}
+		case VIDIOCSFREQ:
+		{
+			unsigned long *freq = arg;
+			if (!(fmr2->flags & VIDEO_TUNER_LOW))
+				*freq *= 1000;
+			if ( *freq < RSF16_MINFREQ || *freq > RSF16_MAXFREQ )
+				return -EINVAL;
+			/* rounding in steps of 200 to match th freq
+			 * that will be used
+			 */
+			fmr2->curfreq = (*freq/200)*200;
+
+			/* set card freq (if not muted) */
+			if (fmr2->curvol && !fmr2->mute)
+			{
+				down(&lock);
+				fmr2_setfreq(fmr2);
+				up(&lock);
+			}
+			return 0;
+		}
+		case VIDIOCGAUDIO:
+		{
+			struct video_audio *v = arg;
+			memset(v,0,sizeof(*v));
+			/* !!! do not return VIDEO_AUDIO_MUTE */
+			v->flags = VIDEO_AUDIO_MUTABLE;
+			strcpy(v->name, "Radio");
+			/* get current stereo mode */
+			v->mode = fmr2->stereo ? VIDEO_SOUND_STEREO: VIDEO_SOUND_MONO;
+			/* volume supported ? */
+			if (fmr2->card_type == 11)
+			{
+				v->flags |= VIDEO_AUDIO_VOLUME;
+				v->step = 1 << 12;
+				v->volume = fmr2->curvol;
+			}
+			debug_print((KERN_DEBUG "Get flags %d vol %d\n", v->flags, v->volume));
+			return 0;
+		}
+		case VIDIOCSAUDIO:
+		{
+			struct video_audio *v = arg;
+			if(v->audio)
+				return -EINVAL;
+			debug_print((KERN_DEBUG "Set flags %d vol %d\n", v->flags, v->volume));
+			/* set volume */
+			if (v->flags & VIDEO_AUDIO_VOLUME)
+				fmr2->curvol = v->volume; /* !!! set with precision */
+			if (fmr2->card_type != 11) fmr2->curvol = 65535;
+			fmr2->mute = 0;
+			if (v->flags & VIDEO_AUDIO_MUTE)
+				fmr2->mute = 1;
+#ifdef DEBUG
+			if (fmr2->curvol && !fmr2->mute)
+				printk(KERN_DEBUG "unmute\n");
+			else
+				printk(KERN_DEBUG "mute\n");
+#endif
+			down(&lock);
+			if (fmr2->curvol && !fmr2->mute)
+			{
+				fmr2_setvolume(fmr2);
+				fmr2_setfreq(fmr2);
+			}
+			else fmr2_mute(fmr2->port);
+			up(&lock);
+			return 0;
+		}
+		case VIDIOCGUNIT:
+		{
+			struct video_unit *v = arg;
+			v->video=VIDEO_NO_UNIT;
+			v->vbi=VIDEO_NO_UNIT;
+			v->radio=dev->minor;
+			v->audio=0; /* How do we find out this??? */
+			v->teletext=VIDEO_NO_UNIT;
+			return 0;
+		}
+		default:
+			return -ENOIOCTLCMD;
+	}
+}
+
+static int fmr2_ioctl(struct inode *inode, struct file *file,
+                      unsigned int cmd, unsigned long arg)
+ {
+	return video_usercopy(inode, file, cmd, arg, fmr2_do_ioctl);
+}
+
+static struct fmr2_device fmr2_unit;
+
+static struct file_operations fmr2_fops = {
+	.owner          = THIS_MODULE,
+	.open           = video_exclusive_open,
+	.release        = video_exclusive_release,
+	.ioctl          = fmr2_ioctl,
+	.llseek         = no_llseek,
+};
+
+static struct video_device fmr2_radio=
+{
+	.owner		= THIS_MODULE,
+	.name		= "SF16FMR2 radio",
+	. type		= VID_TYPE_TUNER,
+	.hardware	= VID_HARDWARE_SF16FMR2,
+	.fops		= &fmr2_fops,
+};
+
+static int __init fmr2_init(void)
+{
+	fmr2_unit.port = io;
+	fmr2_unit.curvol = 0;
+	fmr2_unit.mute = 0;
+	fmr2_unit.curfreq = 0;
+	fmr2_unit.stereo = 1;
+	fmr2_unit.flags = VIDEO_TUNER_LOW;
+	fmr2_unit.card_type = 0;
+	fmr2_radio.priv = &fmr2_unit;
+
+	init_MUTEX(&lock);
+
+	if (request_region(io, 2, "sf16fmr2"))
+	{
+		printk(KERN_ERR "fmr2: port 0x%x already in use\n", io);
+		return -EBUSY;
+	}
+
+	if(video_register_device(&fmr2_radio, VFL_TYPE_RADIO, radio_nr)==-1)
+	{
+		release_region(io, 2);
+		return -EINVAL;
+	}
+
+	printk(KERN_INFO "SF16FMR2 radio card driver at 0x%x.\n", io);
+	debug_print((KERN_DEBUG "Mute %d Low %d\n",VIDEO_AUDIO_MUTE,VIDEO_TUNER_LOW));
+	/* mute card - prevents noisy bootups */
+	down(&lock);
+	fmr2_mute(io);
+	fmr2_product_info(&fmr2_unit);
+	up(&lock);
+	debug_print((KERN_DEBUG "card_type %d\n", fmr2_unit.card_type));
+	return 0;
+}
+
+MODULE_AUTHOR("Ziglio Frediano, freddy77@angelfire.com");
+MODULE_DESCRIPTION("A driver for the SF16FMR2 radio.");
+MODULE_LICENSE("GPL");
+
+module_param(io, int, 0);
+MODULE_PARM_DESC(io, "I/O address of the SF16FMR2 card (should be 0x384, if do not work try 0x284)");
+module_param(radio_nr, int, 0);
+
+static void __exit fmr2_cleanup_module(void)
+{
+	video_unregister_device(&fmr2_radio);
+	release_region(io,2);
+}
+
+module_init(fmr2_init);
+module_exit(fmr2_cleanup_module);
+
+#ifndef MODULE
+
+static int __init fmr2_setup_io(char *str)
+{
+	get_option(&str, &io);
+	return 1;
+}
+
+__setup("sf16fmr2=", fmr2_setup_io);
+
+#endif