iommu/vt-d: Support Enhanced Command Interface

The Enhanced Command Register is to submit command and operand of
enhanced commands to DMA Remapping hardware. It can supports up to 256
enhanced commands.

There is a HW register to indicate the availability of all 256 enhanced
commands. Each bit stands for each command. But there isn't an existing
interface to read/write all 256 bits. Introduce the u64 ecmdcap[4] to
store the existence of each enhanced command. Read 4 times to get all of
them in map_iommu().

Add a helper to facilitate an enhanced command launch. Make sure hardware
complete the command. Also add a helper to facilitate the check of PMU
essentials. These helpers will be used later.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20230128200428.1459118-4-kan.liang@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

1 files changed, 56 insertions, 0 deletions

diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index 317af67b6098..e314c30d371a 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -5022,3 +5022,59 @@ void quirk_extra_dev_tlb_flush(struct device_domain_info *info,
 					 pasid, qdep, address, mask);
 	}
 }
+
+#define ecmd_get_status_code(res)	(((res) & 0xff) >> 1)
+
+/*
+ * Function to submit a command to the enhanced command interface. The
+ * valid enhanced command descriptions are defined in Table 47 of the
+ * VT-d spec. The VT-d hardware implementation may support some but not
+ * all commands, which can be determined by checking the Enhanced
+ * Command Capability Register.
+ *
+ * Return values:
+ *  - 0: Command successful without any error;
+ *  - Negative: software error value;
+ *  - Nonzero positive: failure status code defined in Table 48.
+ */
+int ecmd_submit_sync(struct intel_iommu *iommu, u8 ecmd, u64 oa, u64 ob)
+{
+	unsigned long flags;
+	u64 res;
+	int ret;
+
+	if (!cap_ecmds(iommu->cap))
+		return -ENODEV;
+
+	raw_spin_lock_irqsave(&iommu->register_lock, flags);
+
+	res = dmar_readq(iommu->reg + DMAR_ECRSP_REG);
+	if (res & DMA_ECMD_ECRSP_IP) {
+		ret = -EBUSY;
+		goto err;
+	}
+
+	/*
+	 * Unconditionally write the operand B, because
+	 * - There is no side effect if an ecmd doesn't require an
+	 *   operand B, but we set the register to some value.
+	 * - It's not invoked in any critical path. The extra MMIO
+	 *   write doesn't bring any performance concerns.
+	 */
+	dmar_writeq(iommu->reg + DMAR_ECEO_REG, ob);
+	dmar_writeq(iommu->reg + DMAR_ECMD_REG, ecmd | (oa << DMA_ECMD_OA_SHIFT));
+
+	IOMMU_WAIT_OP(iommu, DMAR_ECRSP_REG, dmar_readq,
+		      !(res & DMA_ECMD_ECRSP_IP), res);
+
+	if (res & DMA_ECMD_ECRSP_IP) {
+		ret = -ETIMEDOUT;
+		goto err;
+	}
+
+	ret = ecmd_get_status_code(res);
+err:
+	raw_spin_unlock_irqrestore(&iommu->register_lock, flags);
+
+	return ret;
+}