iio: adc: ti-ads1119: Add driver

The ADS1119 is a precision, 16-bit, analog-to-digital converter (ADC)
that features two differential or four single-ended inputs through a
flexible input multiplexer (MUX), rail-to-rail input
buffers, a programmable gain stage, a voltage reference, and an
oscillator.

Apart from normal single conversion, the driver also supports
continuous conversion mode using a triggered buffer. However, in this
mode only one channel can be scanned at a time.

Datasheet: https://www.ti.com/lit/gpn/ads1119
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20240617183905.4685-1-francesco@dolcini.it
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

3 files changed, 838 insertions, 0 deletions

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 3d91015af6ea..b8184706c7d1 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -1351,6 +1351,18 @@ config TI_ADS1015
 	  This driver can also be built as a module. If so, the module will be
 	  called ti-ads1015.
 
+config TI_ADS1119
+       tristate "Texas Instruments ADS1119 ADC"
+       depends on I2C
+       select IIO_BUFFER
+       select IIO_TRIGGERED_BUFFER
+       help
+         If you say yes here you get support for Texas Instruments ADS1119
+         ADC chip.
+
+         This driver can also be built as a module. If so, the module will be
+         called ti-ads1119.
+
 config TI_ADS7924
 	tristate "Texas Instruments ADS7924 ADC"
 	depends on I2C
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 37ac689a0209..51298c52b223 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -121,6 +121,7 @@ obj-$(CONFIG_TI_ADC128S052) += ti-adc128s052.o
 obj-$(CONFIG_TI_ADC161S626) += ti-adc161s626.o
 obj-$(CONFIG_TI_ADS1015) += ti-ads1015.o
 obj-$(CONFIG_TI_ADS1100) += ti-ads1100.o
+obj-$(CONFIG_TI_ADS1119) += ti-ads1119.o
 obj-$(CONFIG_TI_ADS124S08) += ti-ads124s08.o
 obj-$(CONFIG_TI_ADS1298) += ti-ads1298.o
 obj-$(CONFIG_TI_ADS131E08) += ti-ads131e08.o
diff --git a/drivers/iio/adc/ti-ads1119.c b/drivers/iio/adc/ti-ads1119.c
new file mode 100644
index 000000000000..630f5d5f9a60
--- /dev/null
+++ b/drivers/iio/adc/ti-ads1119.c
@@ -0,0 +1,825 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Texas Instruments ADS1119 ADC driver.
+ *
+ * Copyright 2024 Toradex
+ */
+
+#include <linux/bits.h>
+#include <linux/bitfield.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/dev_printk.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/iopoll.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/math.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+#include <linux/units.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+
+#define ADS1119_CMD_RESET		0x06
+#define ADS1119_CMD_POWERDOWN		0x02
+#define ADS1119_CMD_START_SYNC		0x08
+#define ADS1119_CMD_RDATA		0x10
+#define ADS1119_CMD_RREG_CONFIG		0x20
+#define ADS1119_CMD_RREG_STATUS		0x24
+#define ADS1119_CMD_WREG		0x40
+
+#define ADS1119_CMD_RREG(reg)		(0x20 | (reg) << 2)
+
+/* Config register */
+#define ADS1119_REG_CONFIG	0x00
+#define ADS1119_CONFIG_VREF_FIELD	BIT(0)
+#define ADS1119_CONFIG_CM_FIELD		BIT(1)
+#define ADS1119_CONFIG_DR_FIELD		GENMASK(3, 2)
+#define ADS1119_CONFIG_GAIN_FIELD	BIT(4)
+#define ADS1119_CONFIG_MUX_FIELD	GENMASK(7, 5)
+
+#define ADS1119_VREF_INTERNAL	0
+#define ADS1119_VREF_EXTERNAL	1
+#define ADS1119_VREF_INTERNAL_VAL 2048000
+
+#define ADS1119_CM_SINGLE	0
+#define ADS1119_CM_CONTINUOUS	1
+
+#define ADS1119_DR_20_SPS	0
+#define ADS1119_DR_90_SPS	1
+#define ADS1119_DR_330_SPS	2
+#define ADS1119_DR_1000_SPS	3
+
+#define ADS1119_GAIN_1	0
+#define ADS1119_GAIN_4	1
+
+#define ADS1119_MUX_AIN0_AIN1	0
+#define ADS1119_MUX_AIN2_AIN3	1
+#define ADS1119_MUX_AIN1_AIN2	2
+#define ADS1119_MUX_AIN0	3
+#define ADS1119_MUX_AIN1	4
+#define ADS1119_MUX_AIN2	5
+#define ADS1119_MUX_AIN3	6
+#define ADS1119_MUX_SHORTED	7
+
+/* Status register */
+#define ADS1119_REG_STATUS	0x01
+#define ADS1119_STATUS_DRDY_FIELD	BIT(7)
+
+#define ADS1119_DEFAULT_GAIN		1
+#define ADS1119_DEFAULT_DATARATE	20
+
+#define ADS1119_SUSPEND_DELAY		2000
+
+/* Timeout based on the minimum sample rate of 20 SPS (50000us) */
+#define ADS1119_MAX_DRDY_TIMEOUT	85000
+
+#define ADS1119_MAX_CHANNELS		7
+#define ADS1119_MAX_SINGLE_CHANNELS	4
+
+struct ads1119_channel_config {
+	int gain;
+	int datarate;
+	int mux;
+};
+
+struct ads1119_state {
+	struct completion completion;
+	struct i2c_client *client;
+	struct gpio_desc *reset_gpio;
+	struct iio_trigger *trig;
+	struct ads1119_channel_config *channels_cfg;
+	unsigned int num_channels_cfg;
+	unsigned int cached_config;
+	int vref_uV;
+};
+
+static const char * const ads1119_power_supplies[] = {
+	"avdd", "dvdd"
+};
+
+static const int ads1119_available_datarates[] = {
+	20, 90, 330, 1000,
+};
+
+static const int ads1119_available_gains[] = {
+	1, 1,
+	1, 4,
+};
+
+static int ads1119_upd_cfg_reg(struct ads1119_state *st, unsigned int fields,
+			       unsigned int val)
+{
+	unsigned int config = st->cached_config;
+	int ret;
+
+	config &= ~fields;
+	config |= val;
+
+	ret = i2c_smbus_write_byte_data(st->client, ADS1119_CMD_WREG, config);
+	if (ret)
+		return ret;
+
+	st->cached_config = config;
+
+	return 0;
+}
+
+static bool ads1119_data_ready(struct ads1119_state *st)
+{
+	int status;
+
+	status = i2c_smbus_read_byte_data(st->client, ADS1119_CMD_RREG_STATUS);
+	if (status < 0)
+		return false;
+
+	return FIELD_GET(ADS1119_STATUS_DRDY_FIELD, status);
+}
+
+static int ads1119_reset(struct ads1119_state *st)
+{
+	st->cached_config = 0;
+
+	if (!st->reset_gpio)
+		return i2c_smbus_write_byte(st->client, ADS1119_CMD_RESET);
+
+	gpiod_set_value_cansleep(st->reset_gpio, 1);
+	udelay(1);
+	gpiod_set_value_cansleep(st->reset_gpio, 0);
+	udelay(1);
+
+	return 0;
+}
+
+static int ads1119_set_conv_mode(struct ads1119_state *st, bool continuous)
+{
+	unsigned int mode;
+
+	if (continuous)
+		mode = ADS1119_CM_CONTINUOUS;
+	else
+		mode = ADS1119_CM_SINGLE;
+
+	return ads1119_upd_cfg_reg(st, ADS1119_CONFIG_CM_FIELD,
+				   FIELD_PREP(ADS1119_CONFIG_CM_FIELD, mode));
+}
+
+static int ads1119_get_hw_gain(int gain)
+{
+	if (gain == 4)
+		return ADS1119_GAIN_4;
+	else
+		return ADS1119_GAIN_1;
+}
+
+static int ads1119_get_hw_datarate(int datarate)
+{
+	switch (datarate) {
+	case 90:
+		return ADS1119_DR_90_SPS;
+	case 330:
+		return ADS1119_DR_330_SPS;
+	case 1000:
+		return ADS1119_DR_1000_SPS;
+	case 20:
+	default:
+		return ADS1119_DR_20_SPS;
+	}
+}
+
+static int ads1119_configure_channel(struct ads1119_state *st, int mux,
+				     int gain, int datarate)
+{
+	int ret;
+
+	ret = ads1119_upd_cfg_reg(st, ADS1119_CONFIG_MUX_FIELD,
+				  FIELD_PREP(ADS1119_CONFIG_MUX_FIELD, mux));
+	if (ret)
+		return ret;
+
+	ret = ads1119_upd_cfg_reg(st, ADS1119_CONFIG_GAIN_FIELD,
+				  FIELD_PREP(ADS1119_CONFIG_GAIN_FIELD,
+					     ads1119_get_hw_gain(gain)));
+	if (ret)
+		return ret;
+
+	return ads1119_upd_cfg_reg(st, ADS1119_CONFIG_DR_FIELD,
+				   FIELD_PREP(ADS1119_CONFIG_DR_FIELD,
+					      ads1119_get_hw_datarate(datarate)));
+}
+
+static int ads1119_poll_data_ready(struct ads1119_state *st,
+				   struct iio_chan_spec const *chan)
+{
+	unsigned int datarate = st->channels_cfg[chan->address].datarate;
+	unsigned long wait_time;
+	bool data_ready;
+
+	/* Poll 5 times more than the data rate */
+	wait_time = DIV_ROUND_CLOSEST(MICRO, 5 * datarate);
+
+	return read_poll_timeout(ads1119_data_ready, data_ready,
+				 data_ready, wait_time,
+				 ADS1119_MAX_DRDY_TIMEOUT, false, st);
+}
+
+static int ads1119_read_data(struct ads1119_state *st,
+			     struct iio_chan_spec const *chan,
+			     unsigned int *val)
+{
+	unsigned int timeout;
+	int ret = 0;
+
+	timeout = msecs_to_jiffies(ADS1119_MAX_DRDY_TIMEOUT);
+
+	if (!st->client->irq) {
+		ret = ads1119_poll_data_ready(st, chan);
+		if (ret)
+			return ret;
+	} else if (!wait_for_completion_timeout(&st->completion, timeout)) {
+		return -ETIMEDOUT;
+	}
+
+	ret = i2c_smbus_read_word_swapped(st->client, ADS1119_CMD_RDATA);
+	if (ret < 0)
+		return ret;
+
+	*val = ret;
+
+	return 0;
+}
+
+static int ads1119_single_conversion(struct ads1119_state *st,
+				     struct iio_chan_spec const *chan,
+				     int *val,
+				     bool calib_offset)
+{
+	struct device *dev = &st->client->dev;
+	int mux = st->channels_cfg[chan->address].mux;
+	int gain = st->channels_cfg[chan->address].gain;
+	int datarate = st->channels_cfg[chan->address].datarate;
+	unsigned int sample;
+	int ret;
+
+	if (calib_offset)
+		mux = ADS1119_MUX_SHORTED;
+
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret)
+		goto pdown;
+
+	ret = ads1119_configure_channel(st, mux, gain, datarate);
+	if (ret)
+		goto pdown;
+
+	ret = i2c_smbus_write_byte(st->client, ADS1119_CMD_START_SYNC);
+	if (ret)
+		goto pdown;
+
+	ret = ads1119_read_data(st, chan, &sample);
+	if (ret)
+		goto pdown;
+
+	*val = sign_extend32(sample, chan->scan_type.realbits - 1);
+	ret = IIO_VAL_INT;
+pdown:
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+	return ret;
+}
+
+static int ads1119_validate_datarate(struct ads1119_state *st, int datarate)
+{
+	switch (datarate) {
+	case 20:
+	case 90:
+	case 330:
+	case 1000:
+		return datarate;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ads1119_read_avail(struct iio_dev *indio_dev,
+			      struct iio_chan_spec const *chan,
+			      const int **vals, int *type, int *length,
+			      long mask)
+{
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		*type = IIO_VAL_FRACTIONAL;
+		*vals = ads1119_available_gains;
+		*length = ARRAY_SIZE(ads1119_available_gains);
+		return IIO_AVAIL_LIST;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*type = IIO_VAL_INT;
+		*vals = ads1119_available_datarates;
+		*length = ARRAY_SIZE(ads1119_available_datarates);
+		return IIO_AVAIL_LIST;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ads1119_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan, int *val,
+			    int *val2, long mask)
+{
+	struct ads1119_state *st = iio_priv(indio_dev);
+	unsigned int index = chan->address;
+
+	if (index >= st->num_channels_cfg)
+		return -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		iio_device_claim_direct_scoped(return -EBUSY, indio_dev)
+			return ads1119_single_conversion(st, chan, val, false);
+		unreachable();
+	case IIO_CHAN_INFO_OFFSET:
+		iio_device_claim_direct_scoped(return -EBUSY, indio_dev)
+			return ads1119_single_conversion(st, chan, val, true);
+		unreachable();
+	case IIO_CHAN_INFO_SCALE:
+		*val = st->vref_uV / 1000;
+		*val /= st->channels_cfg[index].gain;
+		*val2 = chan->scan_type.realbits - 1;
+		return IIO_VAL_FRACTIONAL_LOG2;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*val = st->channels_cfg[index].datarate;
+		return IIO_VAL_INT;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ads1119_write_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan, int val,
+			     int val2, long mask)
+{
+	struct ads1119_state *st = iio_priv(indio_dev);
+	unsigned int index = chan->address;
+	int ret;
+
+	if (index >= st->num_channels_cfg)
+		return -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		ret = MICRO / ((val * MICRO) + val2);
+		if (ret != 1 && ret != 4)
+			return -EINVAL;
+
+		st->channels_cfg[index].gain = ret;
+		return 0;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		ret = ads1119_validate_datarate(st, val);
+		if (ret < 0)
+			return ret;
+
+		st->channels_cfg[index].datarate = ret;
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ads1119_debugfs_reg_access(struct iio_dev *indio_dev,
+				      unsigned int reg, unsigned int writeval,
+				      unsigned int *readval)
+{
+	struct ads1119_state *st = iio_priv(indio_dev);
+	int ret;
+
+	if (reg > ADS1119_REG_STATUS)
+		return -EINVAL;
+
+	if (readval) {
+		ret = i2c_smbus_read_byte_data(st->client,
+					       ADS1119_CMD_RREG(reg));
+		if (ret < 0)
+			return ret;
+
+		*readval = ret;
+		return 0;
+	}
+
+	if (reg > ADS1119_REG_CONFIG)
+		return -EINVAL;
+
+	return i2c_smbus_write_byte_data(st->client, ADS1119_CMD_WREG,
+					 writeval);
+}
+
+static const struct iio_info ads1119_info = {
+	.read_avail = ads1119_read_avail,
+	.read_raw = ads1119_read_raw,
+	.write_raw = ads1119_write_raw,
+	.debugfs_reg_access = ads1119_debugfs_reg_access,
+};
+
+static int ads1119_triggered_buffer_preenable(struct iio_dev *indio_dev)
+{
+	struct ads1119_state *st = iio_priv(indio_dev);
+	struct device *dev = &st->client->dev;
+	unsigned int index;
+	int ret;
+
+	index = find_first_bit(indio_dev->active_scan_mask,
+			       indio_dev->masklength);
+
+	ret = ads1119_set_conv_mode(st, true);
+	if (ret)
+		return ret;
+
+	ret = ads1119_configure_channel(st,
+					st->channels_cfg[index].mux,
+					st->channels_cfg[index].gain,
+					st->channels_cfg[index].datarate);
+	if (ret)
+		return ret;
+
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret)
+		return ret;
+
+	return i2c_smbus_write_byte(st->client, ADS1119_CMD_START_SYNC);
+}
+
+static int ads1119_triggered_buffer_postdisable(struct iio_dev *indio_dev)
+{
+	struct ads1119_state *st = iio_priv(indio_dev);
+	struct device *dev = &st->client->dev;
+	int ret;
+
+	ret = ads1119_set_conv_mode(st, false);
+	if (ret)
+		return ret;
+
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
+	return 0;
+}
+
+static const struct iio_buffer_setup_ops ads1119_buffer_setup_ops = {
+	.preenable = ads1119_triggered_buffer_preenable,
+	.postdisable = ads1119_triggered_buffer_postdisable,
+	.validate_scan_mask = &iio_validate_scan_mask_onehot,
+};
+
+static const struct iio_trigger_ops ads1119_trigger_ops = {
+	.validate_device = &iio_trigger_validate_own_device,
+};
+
+static irqreturn_t ads1119_irq_handler(int irq, void *dev_id)
+{
+	struct iio_dev *indio_dev = dev_id;
+	struct ads1119_state *st = iio_priv(indio_dev);
+
+	if (iio_buffer_enabled(indio_dev) && iio_trigger_using_own(indio_dev))
+		iio_trigger_poll(indio_dev->trig);
+	else
+		complete(&st->completion);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t ads1119_trigger_handler(int irq, void *private)
+{
+	struct iio_poll_func *pf = private;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct ads1119_state *st = iio_priv(indio_dev);
+	struct {
+		unsigned int sample;
+		s64 timestamp __aligned(8);
+	} scan;
+	unsigned int index;
+	int ret;
+
+	if (!iio_trigger_using_own(indio_dev)) {
+		index = find_first_bit(indio_dev->active_scan_mask,
+				       indio_dev->masklength);
+
+		ret = ads1119_poll_data_ready(st, &indio_dev->channels[index]);
+		if (ret) {
+			dev_err(&st->client->dev,
+				"Failed to poll data on trigger (%d)\n", ret);
+			goto done;
+		}
+	}
+
+	ret = i2c_smbus_read_word_swapped(st->client, ADS1119_CMD_RDATA);
+	if (ret < 0) {
+		dev_err(&st->client->dev,
+			"Failed to read data on trigger (%d)\n", ret);
+		goto done;
+	}
+
+	scan.sample = ret;
+
+	iio_push_to_buffers_with_timestamp(indio_dev, &scan,
+					   iio_get_time_ns(indio_dev));
+done:
+	iio_trigger_notify_done(indio_dev->trig);
+	return IRQ_HANDLED;
+}
+
+static int ads1119_init(struct ads1119_state *st, bool vref_external)
+{
+	int ret;
+
+	ret = ads1119_reset(st);
+	if (ret)
+		return ret;
+
+	if (vref_external)
+		return ads1119_upd_cfg_reg(st,
+					   ADS1119_CONFIG_VREF_FIELD,
+					   FIELD_PREP(ADS1119_CONFIG_VREF_FIELD,
+						      ADS1119_VREF_EXTERNAL));
+	return 0;
+}
+
+static int ads1119_map_analog_inputs_mux(int ain_pos, int ain_neg,
+					 bool differential)
+{
+	if (ain_pos >= ADS1119_MAX_SINGLE_CHANNELS)
+		return -EINVAL;
+
+	if (!differential)
+		return ADS1119_MUX_AIN0 + ain_pos;
+
+	if (ain_pos == 0 && ain_neg == 1)
+		return ADS1119_MUX_AIN0_AIN1;
+	else if (ain_pos == 1 && ain_neg == 2)
+		return ADS1119_MUX_AIN1_AIN2;
+	else if (ain_pos == 2 && ain_neg == 3)
+		return ADS1119_MUX_AIN2_AIN3;
+
+	return -EINVAL;
+}
+
+static int ads1119_alloc_and_config_channels(struct iio_dev *indio_dev)
+{
+	const struct iio_chan_spec ads1119_channel =
+		(const struct iio_chan_spec) {
+		.type = IIO_VOLTAGE,
+		.indexed = 1,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+		BIT(IIO_CHAN_INFO_SCALE) |
+		BIT(IIO_CHAN_INFO_OFFSET) |
+		BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.info_mask_shared_by_all_available =
+		BIT(IIO_CHAN_INFO_SCALE) |
+		BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.scan_type = {
+			.sign = 's',
+			.realbits = 16,
+			.storagebits = 16,
+			.endianness = IIO_CPU,
+		},
+	};
+	const struct iio_chan_spec ads1119_ts = IIO_CHAN_SOFT_TIMESTAMP(0);
+	struct ads1119_state *st = iio_priv(indio_dev);
+	struct iio_chan_spec *iio_channels, *chan;
+	struct device *dev = &st->client->dev;
+	unsigned int num_channels, i;
+	bool differential;
+	u32 ain[2];
+	int ret;
+
+	st->num_channels_cfg = device_get_child_node_count(dev);
+	if (st->num_channels_cfg > ADS1119_MAX_CHANNELS)
+		return dev_err_probe(dev, -EINVAL,
+				     "Too many channels %d, max is %d\n",
+				     st->num_channels_cfg,
+				     ADS1119_MAX_CHANNELS);
+
+	st->channels_cfg = devm_kcalloc(dev, st->num_channels_cfg,
+					sizeof(*st->channels_cfg), GFP_KERNEL);
+	if (!st->channels_cfg)
+		return -ENOMEM;
+
+	/* Allocate one more iio channel for the timestamp */
+	num_channels = st->num_channels_cfg + 1;
+	iio_channels = devm_kcalloc(dev, num_channels, sizeof(*iio_channels),
+				    GFP_KERNEL);
+	if (!iio_channels)
+		return -ENOMEM;
+
+	i = 0;
+
+	device_for_each_child_node_scoped(dev, child) {
+		chan = &iio_channels[i];
+
+		differential = fwnode_property_present(child, "diff-channels");
+		if (differential)
+			ret = fwnode_property_read_u32_array(child,
+							     "diff-channels",
+							     ain, 2);
+		else
+			ret = fwnode_property_read_u32(child, "single-channel",
+						       &ain[0]);
+
+		if (ret)
+			return dev_err_probe(dev, ret,
+					     "Failed to get channel property\n");
+
+		ret = ads1119_map_analog_inputs_mux(ain[0], ain[1],
+						    differential);
+		if (ret < 0)
+			return dev_err_probe(dev, ret,
+					     "Invalid channel value\n");
+
+		st->channels_cfg[i].mux = ret;
+		st->channels_cfg[i].gain = ADS1119_DEFAULT_GAIN;
+		st->channels_cfg[i].datarate = ADS1119_DEFAULT_DATARATE;
+
+		*chan = ads1119_channel;
+		chan->channel = ain[0];
+		chan->address = i;
+		chan->scan_index = i;
+
+		if (differential) {
+			chan->channel2 = ain[1];
+			chan->differential = 1;
+		}
+
+		dev_dbg(dev, "channel: index %d, mux %d\n", i,
+			st->channels_cfg[i].mux);
+
+		i++;
+	}
+
+	iio_channels[i] = ads1119_ts;
+	iio_channels[i].address = i;
+	iio_channels[i].scan_index = i;
+
+	indio_dev->channels = iio_channels;
+	indio_dev->num_channels = num_channels;
+
+	return 0;
+}
+
+static void ads1119_powerdown(void *data)
+{
+	struct ads1119_state *st = data;
+
+	i2c_smbus_write_byte(st->client, ADS1119_CMD_POWERDOWN);
+}
+
+static int ads1119_probe(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev;
+	struct ads1119_state *st;
+	struct device *dev = &client->dev;
+	bool vref_external = true;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
+	if (!indio_dev)
+		return dev_err_probe(dev, -ENOMEM,
+				     "Failed to allocate IIO device\n");
+
+	st = iio_priv(indio_dev);
+	st->client = client;
+
+	indio_dev->name = "ads1119";
+	indio_dev->info = &ads1119_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	i2c_set_clientdata(client, indio_dev);
+
+	ret = devm_regulator_bulk_get_enable(dev,
+					     ARRAY_SIZE(ads1119_power_supplies),
+					     ads1119_power_supplies);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "Failed to get and enable supplies\n");
+
+	st->vref_uV = devm_regulator_get_enable_read_voltage(dev, "vref");
+	if (st->vref_uV == -ENODEV) {
+		vref_external = false;
+		st->vref_uV = ADS1119_VREF_INTERNAL_VAL;
+	} else if (st->vref_uV < 0) {
+		return dev_err_probe(dev, st->vref_uV, "Failed to get vref\n");
+	}
+
+	st->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(st->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(st->reset_gpio),
+				     "Failed to get reset gpio\n");
+
+	ret = ads1119_alloc_and_config_channels(indio_dev);
+	if (ret)
+		return ret;
+
+	init_completion(&st->completion);
+
+	ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
+					      ads1119_trigger_handler,
+					      &ads1119_buffer_setup_ops);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to setup IIO buffer\n");
+
+	if (client->irq > 0) {
+		ret = devm_request_threaded_irq(dev, client->irq,
+						ads1119_irq_handler,
+						NULL, IRQF_TRIGGER_FALLING,
+						"ads1119", indio_dev);
+		if (ret)
+			return dev_err_probe(dev, ret,
+					     "Failed to allocate irq\n");
+
+		st->trig = devm_iio_trigger_alloc(dev, "%s-dev%d",
+						  indio_dev->name,
+						  iio_device_id(indio_dev));
+		if (!st->trig)
+			return dev_err_probe(dev, -ENOMEM,
+					     "Failed to allocate IIO trigger\n");
+
+		st->trig->ops = &ads1119_trigger_ops;
+		iio_trigger_set_drvdata(st->trig, indio_dev);
+
+		ret = devm_iio_trigger_register(dev, st->trig);
+		if (ret)
+			return dev_err_probe(dev, ret,
+					     "Failed to register IIO trigger\n");
+	}
+
+	ret = ads1119_init(st, vref_external);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "Failed to initialize device\n");
+
+	pm_runtime_set_autosuspend_delay(dev, ADS1119_SUSPEND_DELAY);
+	pm_runtime_use_autosuspend(dev);
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_set_active(dev);
+
+	ret = devm_pm_runtime_enable(dev);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to enable pm runtime\n");
+
+	ret = devm_add_action_or_reset(dev, ads1119_powerdown, st);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "Failed to add powerdown action\n");
+
+	return devm_iio_device_register(dev, indio_dev);
+}
+
+static int ads1119_runtime_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct ads1119_state *st = iio_priv(indio_dev);
+
+	return i2c_smbus_write_byte(st->client, ADS1119_CMD_POWERDOWN);
+}
+
+/*
+ * The ADS1119 does not require a resume function because it automatically
+ * powers on after a reset.
+ * After a power down command, the ADS1119 can still communicate but turns off
+ * its analog parts. To resume from power down, the device will power up again
+ * upon receiving a start/sync command.
+ */
+static DEFINE_RUNTIME_DEV_PM_OPS(ads1119_pm_ops, ads1119_runtime_suspend,
+				 NULL, NULL);
+
+static const struct of_device_id __maybe_unused ads1119_of_match[] = {
+	{ .compatible = "ti,ads1119" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ads1119_of_match);
+
+static const struct i2c_device_id ads1119_id[] = {
+	{ "ads1119", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ads1119_id);
+
+static struct i2c_driver ads1119_driver = {
+	.driver = {
+		.name = "ads1119",
+		.of_match_table = ads1119_of_match,
+		.pm = pm_ptr(&ads1119_pm_ops),
+	},
+	.probe = ads1119_probe,
+	.id_table = ads1119_id,
+};
+module_i2c_driver(ads1119_driver);
+
+MODULE_AUTHOR("João Paulo Gonçalves <joao.goncalves@toradex.com>");
+MODULE_DESCRIPTION("Texas Instruments ADS1119 ADC Driver");
+MODULE_LICENSE("GPL");