Merge 5.1-rc6 into staging-next

We want the fixes in here as well as this resolves an iio driver merge
issue.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 files changed, 139 insertions, 71 deletions

diff --git a/drivers/iio/chemical/Kconfig b/drivers/iio/chemical/Kconfig
index d5fb436f5ae6..5dc11a359444 100644
--- a/drivers/iio/chemical/Kconfig
+++ b/drivers/iio/chemical/Kconfig
@@ -64,6 +64,7 @@ config IAQCORE
 config PMS7003
 	tristate "Plantower PMS7003 particulate matter sensor"
 	depends on SERIAL_DEV_BUS
+	select IIO_TRIGGERED_BUFFER
 	help
 	  Say Y here to build support for the Plantower PMS7003 particulate
 	  matter sensor.
@@ -71,6 +72,19 @@ config PMS7003
 	  To compile this driver as a module, choose M here: the module will
 	  be called pms7003.
 
+config SENSIRION_SGP30
+	tristate "Sensirion SGPxx gas sensors"
+	depends on I2C
+	select CRC8
+	help
+	  Say Y here to build I2C interface support for the following
+	  Sensirion SGP gas sensors:
+	    * SGP30 gas sensor
+	    * SGPC3 low power gas sensor
+
+	  To compile this driver as module, choose M here: the
+	  module will be called sgp30.
+
 config SPS30
 	tristate "SPS30 particulate matter sensor"
 	depends on I2C
diff --git a/drivers/iio/chemical/bme680.h b/drivers/iio/chemical/bme680.h
index 0ae89b87e2d6..4edc5d21cb9f 100644
--- a/drivers/iio/chemical/bme680.h
+++ b/drivers/iio/chemical/bme680.h
@@ -2,11 +2,9 @@
 #ifndef BME680_H_
 #define BME680_H_
 
-#define BME680_REG_CHIP_I2C_ID			0xD0
-#define BME680_REG_CHIP_SPI_ID			0x50
+#define BME680_REG_CHIP_ID			0xD0
 #define   BME680_CHIP_ID_VAL			0x61
-#define BME680_REG_SOFT_RESET_I2C		0xE0
-#define BME680_REG_SOFT_RESET_SPI		0x60
+#define BME680_REG_SOFT_RESET			0xE0
 #define   BME680_CMD_SOFTRESET			0xB6
 #define BME680_REG_STATUS			0x73
 #define   BME680_SPI_MEM_PAGE_BIT		BIT(4)
diff --git a/drivers/iio/chemical/bme680_core.c b/drivers/iio/chemical/bme680_core.c
index 70c1fe4366f4..ccde4c65ff93 100644
--- a/drivers/iio/chemical/bme680_core.c
+++ b/drivers/iio/chemical/bme680_core.c
@@ -63,9 +63,23 @@ struct bme680_data {
 	s32 t_fine;
 };
 
+static const struct regmap_range bme680_volatile_ranges[] = {
+	regmap_reg_range(BME680_REG_MEAS_STAT_0, BME680_REG_GAS_R_LSB),
+	regmap_reg_range(BME680_REG_STATUS, BME680_REG_STATUS),
+	regmap_reg_range(BME680_T2_LSB_REG, BME680_GH3_REG),
+};
+
+static const struct regmap_access_table bme680_volatile_table = {
+	.yes_ranges	= bme680_volatile_ranges,
+	.n_yes_ranges	= ARRAY_SIZE(bme680_volatile_ranges),
+};
+
 const struct regmap_config bme680_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
+	.max_register = 0xef,
+	.volatile_table = &bme680_volatile_table,
+	.cache_type = REGCACHE_RBTREE,
 };
 EXPORT_SYMBOL(bme680_regmap_config);
 
@@ -316,6 +330,10 @@ static s16 bme680_compensate_temp(struct bme680_data *data,
 	s64 var1, var2, var3;
 	s16 calc_temp;
 
+	/* If the calibration is invalid, attempt to reload it */
+	if (!calib->par_t2)
+		bme680_read_calib(data, calib);
+
 	var1 = (adc_temp >> 3) - (calib->par_t1 << 1);
 	var2 = (var1 * calib->par_t2) >> 11;
 	var3 = ((var1 >> 1) * (var1 >> 1)) >> 12;
@@ -583,8 +601,7 @@ static int bme680_gas_config(struct bme680_data *data)
 	return ret;
 }
 
-static int bme680_read_temp(struct bme680_data *data,
-			    int *val, int *val2)
+static int bme680_read_temp(struct bme680_data *data, int *val)
 {
 	struct device *dev = regmap_get_device(data->regmap);
 	int ret;
@@ -617,10 +634,9 @@ static int bme680_read_temp(struct bme680_data *data,
 	 * compensate_press/compensate_humid to get compensated
 	 * pressure/humidity readings.
 	 */
-	if (val && val2) {
-		*val = comp_temp;
-		*val2 = 100;
-		return IIO_VAL_FRACTIONAL;
+	if (val) {
+		*val = comp_temp * 10; /* Centidegrees to millidegrees */
+		return IIO_VAL_INT;
 	}
 
 	return ret;
@@ -635,7 +651,7 @@ static int bme680_read_press(struct bme680_data *data,
 	s32 adc_press;
 
 	/* Read and compensate temperature to get a reading of t_fine */
-	ret = bme680_read_temp(data, NULL, NULL);
+	ret = bme680_read_temp(data, NULL);
 	if (ret < 0)
 		return ret;
 
@@ -668,7 +684,7 @@ static int bme680_read_humid(struct bme680_data *data,
 	u32 comp_humidity;
 
 	/* Read and compensate temperature to get a reading of t_fine */
-	ret = bme680_read_temp(data, NULL, NULL);
+	ret = bme680_read_temp(data, NULL);
 	if (ret < 0)
 		return ret;
 
@@ -761,7 +777,7 @@ static int bme680_read_raw(struct iio_dev *indio_dev,
 	case IIO_CHAN_INFO_PROCESSED:
 		switch (chan->type) {
 		case IIO_TEMP:
-			return bme680_read_temp(data, val, val2);
+			return bme680_read_temp(data, val);
 		case IIO_PRESSURE:
 			return bme680_read_press(data, val, val2);
 		case IIO_HUMIDITYRELATIVE:
@@ -867,8 +883,28 @@ int bme680_core_probe(struct device *dev, struct regmap *regmap,
 {
 	struct iio_dev *indio_dev;
 	struct bme680_data *data;
+	unsigned int val;
 	int ret;
 
+	ret = regmap_write(regmap, BME680_REG_SOFT_RESET,
+			   BME680_CMD_SOFTRESET);
+	if (ret < 0) {
+		dev_err(dev, "Failed to reset chip\n");
+		return ret;
+	}
+
+	ret = regmap_read(regmap, BME680_REG_CHIP_ID, &val);
+	if (ret < 0) {
+		dev_err(dev, "Error reading chip ID\n");
+		return ret;
+	}
+
+	if (val != BME680_CHIP_ID_VAL) {
+		dev_err(dev, "Wrong chip ID, got %x expected %x\n",
+				val, BME680_CHIP_ID_VAL);
+		return -ENODEV;
+	}
+
 	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
 	if (!indio_dev)
 		return -ENOMEM;
diff --git a/drivers/iio/chemical/bme680_i2c.c b/drivers/iio/chemical/bme680_i2c.c
index b2f805b6b36a..de9c9e3d23ea 100644
--- a/drivers/iio/chemical/bme680_i2c.c
+++ b/drivers/iio/chemical/bme680_i2c.c
@@ -23,8 +23,6 @@ static int bme680_i2c_probe(struct i2c_client *client,
 {
 	struct regmap *regmap;
 	const char *name = NULL;
-	unsigned int val;
-	int ret;
 
 	regmap = devm_regmap_init_i2c(client, &bme680_regmap_config);
 	if (IS_ERR(regmap)) {
@@ -33,25 +31,6 @@ static int bme680_i2c_probe(struct i2c_client *client,
 		return PTR_ERR(regmap);
 	}
 
-	ret = regmap_write(regmap, BME680_REG_SOFT_RESET_I2C,
-			   BME680_CMD_SOFTRESET);
-	if (ret < 0) {
-		dev_err(&client->dev, "Failed to reset chip\n");
-		return ret;
-	}
-
-	ret = regmap_read(regmap, BME680_REG_CHIP_I2C_ID, &val);
-	if (ret < 0) {
-		dev_err(&client->dev, "Error reading I2C chip ID\n");
-		return ret;
-	}
-
-	if (val != BME680_CHIP_ID_VAL) {
-		dev_err(&client->dev, "Wrong chip ID, got %x expected %x\n",
-				val, BME680_CHIP_ID_VAL);
-		return -ENODEV;
-	}
-
 	if (id)
 		name = id->name;
 
diff --git a/drivers/iio/chemical/bme680_spi.c b/drivers/iio/chemical/bme680_spi.c
index d0b7bdd3f066..3b838068a7e4 100644
--- a/drivers/iio/chemical/bme680_spi.c
+++ b/drivers/iio/chemical/bme680_spi.c
@@ -12,28 +12,93 @@
 
 #include "bme680.h"
 
+struct bme680_spi_bus_context {
+	struct spi_device *spi;
+	u8 current_page;
+};
+
+/*
+ * In SPI mode there are only 7 address bits, a "page" register determines
+ * which part of the 8-bit range is active. This function looks at the address
+ * and writes the page selection bit if needed
+ */
+static int bme680_regmap_spi_select_page(
+	struct bme680_spi_bus_context *ctx, u8 reg)
+{
+	struct spi_device *spi = ctx->spi;
+	int ret;
+	u8 buf[2];
+	u8 page = (reg & 0x80) ? 0 : 1; /* Page "1" is low range */
+
+	if (page == ctx->current_page)
+		return 0;
+
+	/*
+	 * Data sheet claims we're only allowed to change bit 4, so we must do
+	 * a read-modify-write on each and every page select
+	 */
+	buf[0] = BME680_REG_STATUS;
+	ret = spi_write_then_read(spi, buf, 1, buf + 1, 1);
+	if (ret < 0) {
+		dev_err(&spi->dev, "failed to set page %u\n", page);
+		return ret;
+	}
+
+	buf[0] = BME680_REG_STATUS;
+	if (page)
+		buf[1] |= BME680_SPI_MEM_PAGE_BIT;
+	else
+		buf[1] &= ~BME680_SPI_MEM_PAGE_BIT;
+
+	ret = spi_write(spi, buf, 2);
+	if (ret < 0) {
+		dev_err(&spi->dev, "failed to set page %u\n", page);
+		return ret;
+	}
+
+	ctx->current_page = page;
+
+	return 0;
+}
+
 static int bme680_regmap_spi_write(void *context, const void *data,
 				   size_t count)
 {
-	struct spi_device *spi = context;
+	struct bme680_spi_bus_context *ctx = context;
+	struct spi_device *spi = ctx->spi;
+	int ret;
 	u8 buf[2];
 
 	memcpy(buf, data, 2);
+
+	ret = bme680_regmap_spi_select_page(ctx, buf[0]);
+	if (ret)
+		return ret;
+
 	/*
 	 * The SPI register address (= full register address without bit 7)
 	 * and the write command (bit7 = RW = '0')
 	 */
 	buf[0] &= ~0x80;
 
-	return spi_write_then_read(spi, buf, 2, NULL, 0);
+	return spi_write(spi, buf, 2);
 }
 
 static int bme680_regmap_spi_read(void *context, const void *reg,
 				  size_t reg_size, void *val, size_t val_size)
 {
-	struct spi_device *spi = context;
+	struct bme680_spi_bus_context *ctx = context;
+	struct spi_device *spi = ctx->spi;
+	int ret;
+	u8 addr = *(const u8 *)reg;
+
+	ret = bme680_regmap_spi_select_page(ctx, addr);
+	if (ret)
+		return ret;
 
-	return spi_write_then_read(spi, reg, reg_size, val, val_size);
+	addr |= 0x80; /* bit7 = RW = '1' */
+
+	return spi_write_then_read(spi, &addr, 1, val, val_size);
 }
 
 static struct regmap_bus bme680_regmap_bus = {
@@ -46,8 +111,8 @@ static struct regmap_bus bme680_regmap_bus = {
 static int bme680_spi_probe(struct spi_device *spi)
 {
 	const struct spi_device_id *id = spi_get_device_id(spi);
+	struct bme680_spi_bus_context *bus_context;
 	struct regmap *regmap;
-	unsigned int val;
 	int ret;
 
 	spi->bits_per_word = 8;
@@ -57,45 +122,21 @@ static int bme680_spi_probe(struct spi_device *spi)
 		return ret;
 	}
 
+	bus_context = devm_kzalloc(&spi->dev, sizeof(*bus_context), GFP_KERNEL);
+	if (!bus_context)
+		return -ENOMEM;
+
+	bus_context->spi = spi;
+	bus_context->current_page = 0xff; /* Undefined on warm boot */
+
 	regmap = devm_regmap_init(&spi->dev, &bme680_regmap_bus,
-				  &spi->dev, &bme680_regmap_config);
+				  bus_context, &bme680_regmap_config);
 	if (IS_ERR(regmap)) {
 		dev_err(&spi->dev, "Failed to register spi regmap %d\n",
 				(int)PTR_ERR(regmap));
 		return PTR_ERR(regmap);
 	}
 
-	ret = regmap_write(regmap, BME680_REG_SOFT_RESET_SPI,
-			   BME680_CMD_SOFTRESET);
-	if (ret < 0) {
-		dev_err(&spi->dev, "Failed to reset chip\n");
-		return ret;
-	}
-
-	/* after power-on reset, Page 0(0x80-0xFF) of spi_mem_page is active */
-	ret = regmap_read(regmap, BME680_REG_CHIP_SPI_ID, &val);
-	if (ret < 0) {
-		dev_err(&spi->dev, "Error reading SPI chip ID\n");
-		return ret;
-	}
-
-	if (val != BME680_CHIP_ID_VAL) {
-		dev_err(&spi->dev, "Wrong chip ID, got %x expected %x\n",
-				val, BME680_CHIP_ID_VAL);
-		return -ENODEV;
-	}
-	/*
-	 * select Page 1 of spi_mem_page to enable access to
-	 * to registers from address 0x00 to 0x7F.
-	 */
-	ret = regmap_write_bits(regmap, BME680_REG_STATUS,
-				BME680_SPI_MEM_PAGE_BIT,
-				BME680_SPI_MEM_PAGE_1_VAL);
-	if (ret < 0) {
-		dev_err(&spi->dev, "failed to set page 1 of spi_mem_page\n");
-		return ret;
-	}
-
 	return bme680_core_probe(&spi->dev, regmap, id->name);
 }