iio: adc: new driver to support Linear technology's ltc2496

This chip is similar to the LTC2497 ADC, it just uses SPI instead of I2C
and so has a slightly different protocol. Only the actual hardware
access is different. The spi protocol is different enough to not be able
to map the differences via a regmap.

Also generalize the entry in MAINTAINER to cover the newly introduced
file.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

3 files changed, 119 insertions, 0 deletions

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 27bb4e56eaea..82e33082958c 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -530,6 +530,16 @@ config LTC2485
 	  To compile this driver as a module, choose M here: the module will be
 	  called ltc2485.
 
+config LTC2496
+	tristate "Linear Technology LTC2496 ADC driver"
+	depends on SPI
+	help
+	  Say yes here to build support for Linear Technology LTC2496
+	  16-Bit 8-/16-Channel Delta Sigma ADC.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called ltc2496.
+
 config LTC2497
 	tristate "Linear Technology LTC2497 ADC driver"
 	depends on I2C
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 5f8d7ac6bbe2..919228900df9 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -51,6 +51,7 @@ obj-$(CONFIG_LPC18XX_ADC) += lpc18xx_adc.o
 obj-$(CONFIG_LPC32XX_ADC) += lpc32xx_adc.o
 obj-$(CONFIG_LTC2471) += ltc2471.o
 obj-$(CONFIG_LTC2485) += ltc2485.o
+obj-$(CONFIG_LTC2496) += ltc2496.o ltc2497-core.o
 obj-$(CONFIG_LTC2497) += ltc2497.o ltc2497-core.o
 obj-$(CONFIG_MAX1027) += max1027.o
 obj-$(CONFIG_MAX11100) += max11100.o
diff --git a/drivers/iio/adc/ltc2496.c b/drivers/iio/adc/ltc2496.c
new file mode 100644
index 000000000000..88a30156a849
--- /dev/null
+++ b/drivers/iio/adc/ltc2496.c
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ltc2496.c - Driver for Analog Devices/Linear Technology LTC2496 ADC
+ *
+ * Based on ltc2497.c which has
+ * Copyright (C) 2017 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ *
+ * Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/2496fc.pdf
+ */
+
+#include <linux/spi/spi.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/driver.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+#include "ltc2497.h"
+
+struct ltc2496_driverdata {
+	/* this must be the first member */
+	struct ltc2497core_driverdata common_ddata;
+	struct spi_device *spi;
+
+	/*
+	 * DMA (thus cache coherency maintenance) requires the
+	 * transfer buffers to live in their own cache lines.
+	 */
+	unsigned char rxbuf[3] ____cacheline_aligned;
+	unsigned char txbuf[3];
+};
+
+static int ltc2496_result_and_measure(struct ltc2497core_driverdata *ddata,
+				      u8 address, int *val)
+{
+	struct ltc2496_driverdata *st =
+		container_of(ddata, struct ltc2496_driverdata, common_ddata);
+	struct spi_transfer t = {
+		.tx_buf = st->txbuf,
+		.rx_buf = st->rxbuf,
+		.len = sizeof(st->txbuf),
+	};
+	int ret;
+
+	st->txbuf[0] = LTC2497_ENABLE | address;
+
+	ret = spi_sync_transfer(st->spi, &t, 1);
+	if (ret < 0)  {
+		dev_err(&st->spi->dev, "spi_sync_transfer failed: %pe\n",
+			ERR_PTR(ret));
+		return ret;
+	}
+
+	if (val)
+		*val = ((st->rxbuf[0] & 0x3f) << 12 |
+			st->rxbuf[1] << 4 | st->rxbuf[2] >> 4) -
+			(1 << 17);
+
+	return 0;
+}
+
+static int ltc2496_probe(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev;
+	struct ltc2496_driverdata *st;
+	struct device *dev = &spi->dev;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	st = iio_priv(indio_dev);
+	spi_set_drvdata(spi, indio_dev);
+	st->spi = spi;
+	st->common_ddata.result_and_measure = ltc2496_result_and_measure;
+
+	return ltc2497core_probe(dev, indio_dev);
+}
+
+static int ltc2496_remove(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev = spi_get_drvdata(spi);
+
+	ltc2497core_remove(indio_dev);
+
+	return 0;
+}
+
+static const struct of_device_id ltc2496_of_match[] = {
+	{ .compatible = "lltc,ltc2496", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ltc2496_of_match);
+
+static struct spi_driver ltc2496_driver = {
+	.driver = {
+		.name = "ltc2496",
+		.of_match_table = of_match_ptr(ltc2496_of_match),
+	},
+	.probe = ltc2496_probe,
+	.remove = ltc2496_remove,
+};
+module_spi_driver(ltc2496_driver);
+
+MODULE_AUTHOR("Uwe Kleine-König <u.kleine-könig@pengutronix.de>");
+MODULE_DESCRIPTION("Linear Technology LTC2496 ADC driver");
+MODULE_LICENSE("GPL v2");