i2c-designware: Push all register reads/writes into the core code.

Move all register manipulation code into the core, also move register
offset definitions to i2c-designware-core.c since the bus specific
portions of the driver no longer need/use them.

Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

1 files changed, 135 insertions, 0 deletions

diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index e8b83d9029e1..b9f18ddaaa76 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -34,6 +34,108 @@
 #include <linux/delay.h>
 #include "i2c-designware-core.h"
 
+/*
+ * Registers offset
+ */
+#define DW_IC_CON		0x0
+#define DW_IC_TAR		0x4
+#define DW_IC_DATA_CMD		0x10
+#define DW_IC_SS_SCL_HCNT	0x14
+#define DW_IC_SS_SCL_LCNT	0x18
+#define DW_IC_FS_SCL_HCNT	0x1c
+#define DW_IC_FS_SCL_LCNT	0x20
+#define DW_IC_INTR_STAT		0x2c
+#define DW_IC_INTR_MASK		0x30
+#define DW_IC_RAW_INTR_STAT	0x34
+#define DW_IC_RX_TL		0x38
+#define DW_IC_TX_TL		0x3c
+#define DW_IC_CLR_INTR		0x40
+#define DW_IC_CLR_RX_UNDER	0x44
+#define DW_IC_CLR_RX_OVER	0x48
+#define DW_IC_CLR_TX_OVER	0x4c
+#define DW_IC_CLR_RD_REQ	0x50
+#define DW_IC_CLR_TX_ABRT	0x54
+#define DW_IC_CLR_RX_DONE	0x58
+#define DW_IC_CLR_ACTIVITY	0x5c
+#define DW_IC_CLR_STOP_DET	0x60
+#define DW_IC_CLR_START_DET	0x64
+#define DW_IC_CLR_GEN_CALL	0x68
+#define DW_IC_ENABLE		0x6c
+#define DW_IC_STATUS		0x70
+#define DW_IC_TXFLR		0x74
+#define DW_IC_RXFLR		0x78
+#define DW_IC_TX_ABRT_SOURCE	0x80
+#define DW_IC_COMP_PARAM_1	0xf4
+#define DW_IC_COMP_TYPE		0xfc
+#define DW_IC_COMP_TYPE_VALUE	0x44570140
+
+#define DW_IC_INTR_RX_UNDER	0x001
+#define DW_IC_INTR_RX_OVER	0x002
+#define DW_IC_INTR_RX_FULL	0x004
+#define DW_IC_INTR_TX_OVER	0x008
+#define DW_IC_INTR_TX_EMPTY	0x010
+#define DW_IC_INTR_RD_REQ	0x020
+#define DW_IC_INTR_TX_ABRT	0x040
+#define DW_IC_INTR_RX_DONE	0x080
+#define DW_IC_INTR_ACTIVITY	0x100
+#define DW_IC_INTR_STOP_DET	0x200
+#define DW_IC_INTR_START_DET	0x400
+#define DW_IC_INTR_GEN_CALL	0x800
+
+#define DW_IC_INTR_DEFAULT_MASK		(DW_IC_INTR_RX_FULL | \
+					 DW_IC_INTR_TX_EMPTY | \
+					 DW_IC_INTR_TX_ABRT | \
+					 DW_IC_INTR_STOP_DET)
+
+#define DW_IC_STATUS_ACTIVITY	0x1
+
+#define DW_IC_ERR_TX_ABRT	0x1
+
+/*
+ * status codes
+ */
+#define STATUS_IDLE			0x0
+#define STATUS_WRITE_IN_PROGRESS	0x1
+#define STATUS_READ_IN_PROGRESS		0x2
+
+#define TIMEOUT			20 /* ms */
+
+/*
+ * hardware abort codes from the DW_IC_TX_ABRT_SOURCE register
+ *
+ * only expected abort codes are listed here
+ * refer to the datasheet for the full list
+ */
+#define ABRT_7B_ADDR_NOACK	0
+#define ABRT_10ADDR1_NOACK	1
+#define ABRT_10ADDR2_NOACK	2
+#define ABRT_TXDATA_NOACK	3
+#define ABRT_GCALL_NOACK	4
+#define ABRT_GCALL_READ		5
+#define ABRT_SBYTE_ACKDET	7
+#define ABRT_SBYTE_NORSTRT	9
+#define ABRT_10B_RD_NORSTRT	10
+#define ABRT_MASTER_DIS		11
+#define ARB_LOST		12
+
+#define DW_IC_TX_ABRT_7B_ADDR_NOACK	(1UL << ABRT_7B_ADDR_NOACK)
+#define DW_IC_TX_ABRT_10ADDR1_NOACK	(1UL << ABRT_10ADDR1_NOACK)
+#define DW_IC_TX_ABRT_10ADDR2_NOACK	(1UL << ABRT_10ADDR2_NOACK)
+#define DW_IC_TX_ABRT_TXDATA_NOACK	(1UL << ABRT_TXDATA_NOACK)
+#define DW_IC_TX_ABRT_GCALL_NOACK	(1UL << ABRT_GCALL_NOACK)
+#define DW_IC_TX_ABRT_GCALL_READ	(1UL << ABRT_GCALL_READ)
+#define DW_IC_TX_ABRT_SBYTE_ACKDET	(1UL << ABRT_SBYTE_ACKDET)
+#define DW_IC_TX_ABRT_SBYTE_NORSTRT	(1UL << ABRT_SBYTE_NORSTRT)
+#define DW_IC_TX_ABRT_10B_RD_NORSTRT	(1UL << ABRT_10B_RD_NORSTRT)
+#define DW_IC_TX_ABRT_MASTER_DIS	(1UL << ABRT_MASTER_DIS)
+#define DW_IC_TX_ARB_LOST		(1UL << ARB_LOST)
+
+#define DW_IC_TX_ABRT_NOACK		(DW_IC_TX_ABRT_7B_ADDR_NOACK | \
+					 DW_IC_TX_ABRT_10ADDR1_NOACK | \
+					 DW_IC_TX_ABRT_10ADDR2_NOACK | \
+					 DW_IC_TX_ABRT_TXDATA_NOACK | \
+					 DW_IC_TX_ABRT_GCALL_NOACK)
+
 static char *abort_sources[] = {
 	[ABRT_7B_ADDR_NOACK] =
 		"slave address not acknowledged (7bit mode)",
@@ -562,3 +664,36 @@ tx_aborted:
 
 	return IRQ_HANDLED;
 }
+
+void i2c_dw_enable(struct dw_i2c_dev *dev)
+{
+       /* Enable the adapter */
+	dw_writel(dev, 1, DW_IC_ENABLE);
+}
+
+void i2c_dw_disable(struct dw_i2c_dev *dev)
+{
+	int ret;
+
+	/* Disable controller */
+	dw_writel(dev, 0, DW_IC_ENABLE);
+
+	/* Disable all interupts */
+	dw_writel(dev, 0, DW_IC_INTR_MASK);
+	dw_readl(dev, DW_IC_CLR_INTR);
+}
+
+void i2c_dw_clear_int(struct dw_i2c_dev *dev)
+{
+	dw_readl(dev, DW_IC_CLR_INTR);
+}
+
+void i2c_dw_disable_int(struct dw_i2c_dev *dev)
+{
+	dw_writel(dev, 0, DW_IC_INTR_MASK);
+}
+
+u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev)
+{
+	return dw_readl(dev, DW_IC_COMP_PARAM_1);
+}