Merge tag 'drm-misc-next-2018-02-13' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 4.17:

UAPI Changes:
- drm/vc4: Expose performance counters to userspace (Boris)

Cross-subsystem Changes:
- MAINTAINERS: Linus to maintain panel-arm-versatile in -misc (Linus)

Core Changes:
- Only use swiotlb when necessary (Chunming)

Driver Changes:
- drm/panel: Add support for ARM Versatile panels (Linus)
- pl111: Improvements around versatile panel support (Linus)

----------------------------------------
Tagged on 2018-02-06:
drm-misc-next for 4.17:

UAPI Changes:
- Validate mode flags + type (Ville)
- Deprecate unused mode flags PIXMUX, BCAST (Ville)
- Deprecate unused mode types BUILTIN, CRTC_C, CLOCK_C, DEFAULT (Ville)

Cross-subsystem Changes:
- MAINTAINERS: s/Daniel/Maarten/ for drm-misc (Daniel)

Core Changes:
- gem: Export gem functions for drivers to use (Samuel)
- bridge: Introduce bridge timings in drm_bridge (Linus)
- dma-buf: Allow exclusive fence to be bundled in fence array when
	   calling reservation_object_get_fences_rcu (Christian)
- dp: Add training pattern 4 and HBR3 support to dp helpers (Manasi)
- fourcc: Add alpha bit to formats to avoid driver format LUTs (Maxime)
- mode: Various cleanups + add new device-wide .mode_valid hook (Ville)
- atomic: Fix state leak when non-blocking commits fail (Leo)
	  NOTE: IIRC, this was cross-picked to -fixes so it might fall out
- crc: Allow polling on the data fd (Maarten)

Driver Changes:
- bridge/vga-dac: Add THS8134* support (Linus)
- tinydrm: Various MIPI DBI improvements/cleanups (Noralf)
- bridge/dw-mipi-dsi: Cleanups + use create_packet helper (Brian)
- drm/sun4i: Add Display Engine frontend support (Maxime)
- drm/sun4i: Add zpos support + increase num planes from 2 to 4 (Maxime)
- various: Use drm_mode_get_hv_timing() to fill plane clip rectangle (Ville)
- stm: Add 8-bit clut support, add dsi phy v1.31 support, +fixes (Phillipe)

Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Chunming Zhou <david1.zhou@amd.com>
Cc: Samuel Li <Samuel.Li@amd.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

* tag 'drm-misc-next-2018-02-13' of git://anongit.freedesktop.org/drm/drm-misc: (115 commits)
  drm/radeon: only enable swiotlb path when need v2
  drm/amdgpu: only enable swiotlb alloc when need v2
  drm: add func to get max iomem address v2
  drm/vc4: Expose performance counters to userspace
  drm: Print the pid when debug logging an ioctl error.
  drm/stm: ltdc: remove non-alpha color formats on layer 2 for older hw
  drm/stm: ltdc: add non-alpha color formats
  drm/bridge/synopsys: dsi: Add 1.31 version support
  drm/bridge/synopsys: dsi: Add read feature
  drm/pl111: Support multiple endpoints on the CLCD
  drm/pl111: Support variants with broken VBLANK
  drm/pl111: Support variants with broken clock divider
  drm/pl111: Handle the Versatile RGB/BGR565 mode
  drm/pl111: Properly detect the ARM PL110 variants
  drm/panel: Add support for ARM Versatile panels
  drm/panel: Device tree bindings for ARM Versatile panels
  drm/bridge: Rename argument from crtc to bridge
  drm/crc: Add support for polling on the data fd.
  drm/sun4i: Use drm_mode_get_hv_timing() to populate plane clip rectangle
  drm/rcar-du: Use drm_mode_get_hv_timing() to populate plane clip rectangle
  ...

4 files changed, 393 insertions, 11 deletions

diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 6ba4031f3919..988048ebcc22 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -7,6 +7,16 @@ config DRM_PANEL
 menu "Display Panels"
 	depends on DRM && DRM_PANEL
 
+config DRM_PANEL_ARM_VERSATILE
+	tristate "ARM Versatile panel driver"
+	depends on OF
+	depends on MFD_SYSCON
+	select VIDEOMODE_HELPERS
+	help
+	  This driver supports the ARM Versatile panels connected to ARM
+	  reference designs. The panel is detected using special registers
+	  in the Versatile family syscon registers.
+
 config DRM_PANEL_LVDS
 	tristate "Generic LVDS panel driver"
 	depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index 6d251ebc568c..3d2a88d0e965 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -1,4 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_DRM_PANEL_ARM_VERSATILE) += panel-arm-versatile.o
 obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o
 obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o
 obj-$(CONFIG_DRM_PANEL_ILITEK_IL9322) += panel-ilitek-ili9322.o
diff --git a/drivers/gpu/drm/panel/panel-arm-versatile.c b/drivers/gpu/drm/panel/panel-arm-versatile.c
new file mode 100644
index 000000000000..3930b4925b15
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-arm-versatile.c
@@ -0,0 +1,377 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Panel driver for the ARM Versatile family reference designs from
+ * ARM Limited.
+ *
+ * Author:
+ * Linus Walleij <linus.wallei@linaro.org>
+ *
+ * On the Versatile AB, these panels come mounted on daughterboards
+ * named "IB1" or "IB2" (Interface Board 1 & 2 respectively.) They
+ * are documented in ARM DUI 0225D Appendix C and D. These daughter
+ * boards support TFT display panels.
+ *
+ * - The IB1 is a passive board where the display connector defines a
+ *   few wires for encoding the display type for autodetection,
+ *   suitable display settings can then be looked up from this setting.
+ *   The magic bits can be read out from the system controller.
+ *
+ * - The IB2 is a more complex board intended for GSM phone development
+ *   with some logic and a control register, which needs to be accessed
+ *   and the board display needs to be turned on explicitly.
+ *
+ * On the Versatile PB, a special CLCD adaptor board is available
+ * supporting the same displays as the Versatile AB, plus one more
+ * Epson QCIF display.
+ *
+ */
+#include <drm/drmP.h>
+#include <drm/drm_panel.h>
+
+#include <linux/bitops.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <video/of_videomode.h>
+#include <video/videomode.h>
+
+/*
+ * This configuration register in the Versatile and RealView
+ * family is uniformly present but appears more and more
+ * unutilized starting with the RealView series.
+ */
+#define SYS_CLCD			0x50
+
+/* The Versatile can detect the connected panel type */
+#define SYS_CLCD_CLCDID_MASK		(BIT(8)|BIT(9)|BIT(10)|BIT(11)|BIT(12))
+#define SYS_CLCD_ID_SANYO_3_8		(0x00 << 8)
+#define SYS_CLCD_ID_SHARP_8_4		(0x01 << 8)
+#define SYS_CLCD_ID_EPSON_2_2		(0x02 << 8)
+#define SYS_CLCD_ID_SANYO_2_5		(0x07 << 8)
+#define SYS_CLCD_ID_VGA			(0x1f << 8)
+
+/* IB2 control register for the Versatile daughterboard */
+#define IB2_CTRL			0x00
+#define IB2_CTRL_LCD_SD			BIT(1) /* 1 = shut down LCD */
+#define IB2_CTRL_LCD_BL_ON		BIT(0)
+#define IB2_CTRL_LCD_MASK		(BIT(0)|BIT(1))
+
+/**
+ * struct versatile_panel_type - lookup struct for the supported panels
+ */
+struct versatile_panel_type {
+	/**
+	 * @name: the name of this panel
+	 */
+	const char *name;
+	/**
+	 * @magic: the magic value from the detection register
+	 */
+	u32 magic;
+	/**
+	 * @mode: the DRM display mode for this panel
+	 */
+	struct drm_display_mode mode;
+	/**
+	 * @bus_flags: the DRM bus flags for this panel e.g. inverted clock
+	 */
+	u32 bus_flags;
+	/**
+	 * @width_mm: the panel width in mm
+	 */
+	u32 width_mm;
+	/**
+	 * @height_mm: the panel height in mm
+	 */
+	u32 height_mm;
+	/**
+	 * @ib2: the panel may be connected on an IB2 daughterboard
+	 */
+	bool ib2;
+};
+
+/**
+ * struct versatile_panel - state container for the Versatile panels
+ */
+struct versatile_panel {
+	/**
+	 * @dev: the container device
+	 */
+	struct device *dev;
+	/**
+	 * @panel: the DRM panel instance for this device
+	 */
+	struct drm_panel panel;
+	/**
+	 * @panel_type: the Versatile panel type as detected
+	 */
+	const struct versatile_panel_type *panel_type;
+	/**
+	 * @map: map to the parent syscon where the main register reside
+	 */
+	struct regmap *map;
+	/**
+	 * @ib2_map: map to the IB2 syscon, if applicable
+	 */
+	struct regmap *ib2_map;
+};
+
+static const struct versatile_panel_type versatile_panels[] = {
+	/*
+	 * Sanyo TM38QV67A02A - 3.8 inch QVGA (320x240) Color TFT
+	 * found on the Versatile AB IB1 connector or the Versatile
+	 * PB adaptor board connector.
+	 */
+	{
+		.name = "Sanyo TM38QV67A02A",
+		.magic = SYS_CLCD_ID_SANYO_3_8,
+		.width_mm = 79,
+		.height_mm = 54,
+		.mode = {
+			.clock = 10000000,
+			.hdisplay = 320,
+			.hsync_start = 320 + 6,
+			.hsync_end = 320 + 6 + 6,
+			.htotal = 320 + 6 + 6 + 6,
+			.vdisplay = 240,
+			.vsync_start = 240 + 5,
+			.vsync_end = 240 + 5 + 6,
+			.vtotal = 240 + 5 + 6 + 5,
+			.vrefresh = 116,
+			.flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC,
+		},
+	},
+	/*
+	 * Sharp LQ084V1DG21 640x480 VGA Color TFT module
+	 * found on the Versatile AB IB1 connector or the Versatile
+	 * PB adaptor board connector.
+	 */
+	{
+		.name = "Sharp LQ084V1DG21",
+		.magic = SYS_CLCD_ID_SHARP_8_4,
+		.width_mm = 171,
+		.height_mm = 130,
+		.mode = {
+			.clock = 25000000,
+			.hdisplay = 640,
+			.hsync_start = 640 + 24,
+			.hsync_end = 640 + 24 + 96,
+			.htotal = 640 + 24 + 96 + 24,
+			.vdisplay = 480,
+			.vsync_start = 480 + 11,
+			.vsync_end = 480 + 11 + 2,
+			.vtotal = 480 + 11 + 2 + 32,
+			.vrefresh = 60,
+			.flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC,
+		},
+	},
+	/*
+	 * Epson L2F50113T00 - 2.2 inch QCIF 176x220 Color TFT
+	 * found on the Versatile PB adaptor board connector.
+	 */
+	{
+		.name = "Epson L2F50113T00",
+		.magic = SYS_CLCD_ID_EPSON_2_2,
+		.width_mm = 34,
+		.height_mm = 45,
+		.mode = {
+			.clock = 625000000,
+			.hdisplay = 176,
+			.hsync_start = 176 + 2,
+			.hsync_end = 176 + 2 + 3,
+			.htotal = 176 + 2 + 3 + 3,
+			.vdisplay = 220,
+			.vsync_start = 220 + 0,
+			.vsync_end = 220 + 0 + 2,
+			.vtotal = 220 + 0 + 2 + 1,
+			.vrefresh = 390,
+			.flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC,
+		},
+		.bus_flags = DRM_BUS_FLAG_PIXDATA_NEGEDGE,
+	},
+	/*
+	 * Sanyo ALR252RGT 240x320 portrait display found on the
+	 * Versatile AB IB2 daughterboard for GSM prototyping.
+	 */
+	{
+		.name = "Sanyo ALR252RGT",
+		.magic = SYS_CLCD_ID_SANYO_2_5,
+		.width_mm = 37,
+		.height_mm = 50,
+		.mode = {
+			.clock = 5400000,
+			.hdisplay = 240,
+			.hsync_start = 240 + 10,
+			.hsync_end = 240 + 10 + 10,
+			.htotal = 240 + 10 + 10 + 20,
+			.vdisplay = 320,
+			.vsync_start = 320 + 2,
+			.vsync_end = 320 + 2 + 2,
+			.vtotal = 320 + 2 + 2 + 2,
+			.vrefresh = 116,
+			.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+		},
+		.bus_flags = DRM_BUS_FLAG_PIXDATA_NEGEDGE,
+		.ib2 = true,
+	},
+};
+
+static inline struct versatile_panel *
+to_versatile_panel(struct drm_panel *panel)
+{
+	return container_of(panel, struct versatile_panel, panel);
+}
+
+static int versatile_panel_disable(struct drm_panel *panel)
+{
+	struct versatile_panel *vpanel = to_versatile_panel(panel);
+
+	/* If we're on an IB2 daughterboard, turn off display */
+	if (vpanel->ib2_map) {
+		dev_dbg(vpanel->dev, "disable IB2 display\n");
+		regmap_update_bits(vpanel->ib2_map,
+				   IB2_CTRL,
+				   IB2_CTRL_LCD_MASK,
+				   IB2_CTRL_LCD_SD);
+	}
+
+	return 0;
+}
+
+static int versatile_panel_enable(struct drm_panel *panel)
+{
+	struct versatile_panel *vpanel = to_versatile_panel(panel);
+
+	/* If we're on an IB2 daughterboard, turn on display */
+	if (vpanel->ib2_map) {
+		dev_dbg(vpanel->dev, "enable IB2 display\n");
+		regmap_update_bits(vpanel->ib2_map,
+				   IB2_CTRL,
+				   IB2_CTRL_LCD_MASK,
+				   IB2_CTRL_LCD_BL_ON);
+	}
+
+	return 0;
+}
+
+static int versatile_panel_get_modes(struct drm_panel *panel)
+{
+	struct drm_connector *connector = panel->connector;
+	struct versatile_panel *vpanel = to_versatile_panel(panel);
+	struct drm_display_mode *mode;
+
+	strncpy(connector->display_info.name, vpanel->panel_type->name,
+		DRM_DISPLAY_INFO_LEN);
+	connector->display_info.width_mm = vpanel->panel_type->width_mm;
+	connector->display_info.height_mm = vpanel->panel_type->height_mm;
+	connector->display_info.bus_flags = vpanel->panel_type->bus_flags;
+
+	mode = drm_mode_duplicate(panel->drm, &vpanel->panel_type->mode);
+	drm_mode_set_name(mode);
+	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+
+	mode->width_mm = vpanel->panel_type->width_mm;
+	mode->height_mm = vpanel->panel_type->height_mm;
+	drm_mode_probed_add(connector, mode);
+
+	return 1;
+}
+
+static const struct drm_panel_funcs versatile_panel_drm_funcs = {
+	.disable = versatile_panel_disable,
+	.enable = versatile_panel_enable,
+	.get_modes = versatile_panel_get_modes,
+};
+
+static int versatile_panel_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct versatile_panel *vpanel;
+	struct device *parent;
+	struct regmap *map;
+	int ret;
+	u32 val;
+	int i;
+
+	parent = dev->parent;
+	if (!parent) {
+		dev_err(dev, "no parent for versatile panel\n");
+		return -ENODEV;
+	}
+	map = syscon_node_to_regmap(parent->of_node);
+	if (IS_ERR(map)) {
+		dev_err(dev, "no regmap for versatile panel parent\n");
+		return PTR_ERR(map);
+	}
+
+	vpanel = devm_kzalloc(dev, sizeof(*vpanel), GFP_KERNEL);
+	if (!vpanel)
+		return -ENOMEM;
+
+	ret = regmap_read(map, SYS_CLCD, &val);
+	if (ret) {
+		dev_err(dev, "cannot access syscon regs\n");
+		return ret;
+	}
+
+	val &= SYS_CLCD_CLCDID_MASK;
+
+	for (i = 0; i < ARRAY_SIZE(versatile_panels); i++) {
+		const struct versatile_panel_type *pt;
+
+		pt = &versatile_panels[i];
+		if (pt->magic == val) {
+			vpanel->panel_type = pt;
+			break;
+		}
+	}
+
+	/* No panel detected or VGA, let's leave this show */
+	if (i == ARRAY_SIZE(versatile_panels)) {
+		dev_info(dev, "no panel detected\n");
+		return -ENODEV;
+	}
+
+	dev_info(dev, "detected: %s\n", vpanel->panel_type->name);
+	vpanel->dev = dev;
+	vpanel->map = map;
+
+	/* Check if the panel is mounted on an IB2 daughterboard */
+	if (vpanel->panel_type->ib2) {
+		vpanel->ib2_map = syscon_regmap_lookup_by_compatible(
+			"arm,versatile-ib2-syscon");
+		if (IS_ERR(vpanel->ib2_map))
+			vpanel->ib2_map = NULL;
+		else
+			dev_info(dev, "panel mounted on IB2 daughterboard\n");
+	}
+
+	drm_panel_init(&vpanel->panel);
+	vpanel->panel.dev = dev;
+	vpanel->panel.funcs = &versatile_panel_drm_funcs;
+
+	return drm_panel_add(&vpanel->panel);
+}
+
+static const struct of_device_id versatile_panel_match[] = {
+	{ .compatible = "arm,versatile-tft-panel", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, versatile_panel_match);
+
+static struct platform_driver versatile_panel_driver = {
+	.probe		= versatile_panel_probe,
+	.driver		= {
+		.name	= "versatile-tft-panel",
+		.of_match_table = versatile_panel_match,
+	},
+};
+module_platform_driver(versatile_panel_driver);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
+MODULE_DESCRIPTION("ARM Versatile panel driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpu/drm/panel/panel-panasonic-vvx10f034n00.c b/drivers/gpu/drm/panel/panel-panasonic-vvx10f034n00.c
index 7f915f706fa6..74a806121f80 100644
--- a/drivers/gpu/drm/panel/panel-panasonic-vvx10f034n00.c
+++ b/drivers/gpu/drm/panel/panel-panasonic-vvx10f034n00.c
@@ -59,34 +59,28 @@ static inline struct wuxga_nt_panel *to_wuxga_nt_panel(struct drm_panel *panel)
 
 static int wuxga_nt_panel_on(struct wuxga_nt_panel *wuxga_nt)
 {
-	struct mipi_dsi_device *dsi = wuxga_nt->dsi;
-	int ret;
-
-	ret = mipi_dsi_turn_on_peripheral(dsi);
-	if (ret < 0)
-		return ret;
-
-	return 0;
+	return mipi_dsi_turn_on_peripheral(wuxga_nt->dsi);
 }
 
 static int wuxga_nt_panel_disable(struct drm_panel *panel)
 {
 	struct wuxga_nt_panel *wuxga_nt = to_wuxga_nt_panel(panel);
+	int mipi_ret, bl_ret = 0;
 
 	if (!wuxga_nt->enabled)
 		return 0;
 
-	mipi_dsi_shutdown_peripheral(wuxga_nt->dsi);
+	mipi_ret = mipi_dsi_shutdown_peripheral(wuxga_nt->dsi);
 
 	if (wuxga_nt->backlight) {
 		wuxga_nt->backlight->props.power = FB_BLANK_POWERDOWN;
 		wuxga_nt->backlight->props.state |= BL_CORE_FBBLANK;
-		backlight_update_status(wuxga_nt->backlight);
+		bl_ret = backlight_update_status(wuxga_nt->backlight);
 	}
 
 	wuxga_nt->enabled = false;
 
-	return 0;
+	return mipi_ret ? mipi_ret : bl_ret;
 }
 
 static int wuxga_nt_panel_unprepare(struct drm_panel *panel)