drm/msm: Add SDM845 DPU support

SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a
top level wrapper consisting of Display Processing Unit (DPU) and
display peripheral modules such as Display Serial Interface (DSI)
and DisplayPort (DP).

MDSS functions essentially as a back-end composition engine. It blends
video and graphic images stored in the frame buffers and scans out the
composed image to a display sink (over DSI/DP).

The following diagram represents hardware blocks for a simple pipeline
(two planes are present on a given crtc which is connected to a DSI
connector):

       MDSS
      +---------------------------------+
      | +-----------------------------+ |
      | | DPU                         | |
      | |  +--------+  +--------+     | |
      | |  |  SSPP  |  |  SSPP  |     | |
      | |  +----+---+  +----+---+     | |
      | |       |           |         | |
      | |  +----v-----------v---+     | |
      | |  |  Layer Mixer (LM)  |     | |
      | |  +--------------------+     | |
      | |  +--------------------+     | |
      | |  |    PingPong (PP)   |     | |
      | |  +--------------------+     | |
      | |  +--------------------+     | |
      | |  |  INTERFACE (VIDEO) |     | |
      | |  +---+----------------+     | |
      | +------|----------------------+ |
      |        |                        |
      | +------|---------------------+  |
      | |      | DISPLAY PERIPHERALS |  |
      | |  +---v-+      +-----+      |  |
      | |  | DSI |      |  DP |      |  |
      | |  +-----+      +-----+      |  |
      | +----------------------------+  |
      +---------------------------------+

The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs)
depends on SoC capabilities.

Overview of DPU sub-blocks:
---------------------------
* Source Surface Processor (SSPP):
 Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are
 capable of performing format conversion, scaling and quality improvement
 for source surfaces.

* Layer Mixer (LM):
 Blend source surfaces together (in requested zorder)

* PingPong (PP):
 This block controls frame done interrupt output, EOL and EOF generation,
 overflow/underflow control.

* Display interface (INTF):
 Timing generator and interface connecting the display peripherals.

DRM components mapping to DPU architecture:
------------------------------------------
PLANEs maps to SSPPs
CRTC maps to LMs
Encoder maps to PPs, INTFs

Data flow setup:
---------------
MDSS hardware can support various data flows (e.g.):
  - Dual pipe: Output from two LMs combined to single display.
  - Split display: Output from two LMs connected to two separate
                   interfaces.

The hardware capabilities determine the number of concurrent data paths
possible. Any control path (i.e. pipeline w/i DPU) can be routed to any
of the hardware data paths. A given control path can be triggered,
flushed and controlled independently.

Changes in v3:
- Move msm_media_info.h from uapi to dpu/ subdir
- Remove preclose callback dpu (it's handled in core)
- Fix kbuild warnings with parent_ops
- Remove unused functions from dpu_core_irq
- Rename mdss_phys to mdss
- Rename mdp_phys address space to mdp
- Drop _phys from vbif and regdma binding names

Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org>
Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
[robclark minor rebase]
Signed-off-by: Rob Clark <robdclark@gmail.com>

1 files changed, 384 insertions, 0 deletions

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.c
new file mode 100644
index 000000000000..295528292296
--- /dev/null
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.c
@@ -0,0 +1,384 @@
+/* Copyright (c) 2015-2018, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt)	"[drm:%s:%d] " fmt, __func__, __LINE__
+
+#include <linux/debugfs.h>
+
+#include "dpu_vbif.h"
+#include "dpu_hw_vbif.h"
+#include "dpu_trace.h"
+
+/**
+ * _dpu_vbif_wait_for_xin_halt - wait for the xin to halt
+ * @vbif:	Pointer to hardware vbif driver
+ * @xin_id:	Client interface identifier
+ * @return:	0 if success; error code otherwise
+ */
+static int _dpu_vbif_wait_for_xin_halt(struct dpu_hw_vbif *vbif, u32 xin_id)
+{
+	ktime_t timeout;
+	bool status;
+	int rc;
+
+	if (!vbif || !vbif->cap || !vbif->ops.get_halt_ctrl) {
+		DPU_ERROR("invalid arguments vbif %d\n", vbif != 0);
+		return -EINVAL;
+	}
+
+	timeout = ktime_add_us(ktime_get(), vbif->cap->xin_halt_timeout);
+	for (;;) {
+		status = vbif->ops.get_halt_ctrl(vbif, xin_id);
+		if (status)
+			break;
+		if (ktime_compare_safe(ktime_get(), timeout) > 0) {
+			status = vbif->ops.get_halt_ctrl(vbif, xin_id);
+			break;
+		}
+		usleep_range(501, 1000);
+	}
+
+	if (!status) {
+		rc = -ETIMEDOUT;
+		DPU_ERROR("VBIF %d client %d not halting. TIMEDOUT.\n",
+				vbif->idx - VBIF_0, xin_id);
+	} else {
+		rc = 0;
+		DPU_DEBUG("VBIF %d client %d is halted\n",
+				vbif->idx - VBIF_0, xin_id);
+	}
+
+	return rc;
+}
+
+/**
+ * _dpu_vbif_apply_dynamic_ot_limit - determine OT based on usecase parameters
+ * @vbif:	Pointer to hardware vbif driver
+ * @ot_lim:	Pointer to OT limit to be modified
+ * @params:	Pointer to usecase parameters
+ */
+static void _dpu_vbif_apply_dynamic_ot_limit(struct dpu_hw_vbif *vbif,
+		u32 *ot_lim, struct dpu_vbif_set_ot_params *params)
+{
+	u64 pps;
+	const struct dpu_vbif_dynamic_ot_tbl *tbl;
+	u32 i;
+
+	if (!vbif || !(vbif->cap->features & BIT(DPU_VBIF_QOS_OTLIM)))
+		return;
+
+	/* Dynamic OT setting done only for WFD */
+	if (!params->is_wfd)
+		return;
+
+	pps = params->frame_rate;
+	pps *= params->width;
+	pps *= params->height;
+
+	tbl = params->rd ? &vbif->cap->dynamic_ot_rd_tbl :
+			&vbif->cap->dynamic_ot_wr_tbl;
+
+	for (i = 0; i < tbl->count; i++) {
+		if (pps <= tbl->cfg[i].pps) {
+			*ot_lim = tbl->cfg[i].ot_limit;
+			break;
+		}
+	}
+
+	DPU_DEBUG("vbif:%d xin:%d w:%d h:%d fps:%d pps:%llu ot:%u\n",
+			vbif->idx - VBIF_0, params->xin_id,
+			params->width, params->height, params->frame_rate,
+			pps, *ot_lim);
+}
+
+/**
+ * _dpu_vbif_get_ot_limit - get OT based on usecase & configuration parameters
+ * @vbif:	Pointer to hardware vbif driver
+ * @params:	Pointer to usecase parameters
+ * @return:	OT limit
+ */
+static u32 _dpu_vbif_get_ot_limit(struct dpu_hw_vbif *vbif,
+	struct dpu_vbif_set_ot_params *params)
+{
+	u32 ot_lim = 0;
+	u32 val;
+
+	if (!vbif || !vbif->cap) {
+		DPU_ERROR("invalid arguments vbif %d\n", vbif != 0);
+		return -EINVAL;
+	}
+
+	if (vbif->cap->default_ot_wr_limit && !params->rd)
+		ot_lim = vbif->cap->default_ot_wr_limit;
+	else if (vbif->cap->default_ot_rd_limit && params->rd)
+		ot_lim = vbif->cap->default_ot_rd_limit;
+
+	/*
+	 * If default ot is not set from dt/catalog,
+	 * then do not configure it.
+	 */
+	if (ot_lim == 0)
+		goto exit;
+
+	/* Modify the limits if the target and the use case requires it */
+	_dpu_vbif_apply_dynamic_ot_limit(vbif, &ot_lim, params);
+
+	if (vbif && vbif->ops.get_limit_conf) {
+		val = vbif->ops.get_limit_conf(vbif,
+				params->xin_id, params->rd);
+		if (val == ot_lim)
+			ot_lim = 0;
+	}
+
+exit:
+	DPU_DEBUG("vbif:%d xin:%d ot_lim:%d\n",
+			vbif->idx - VBIF_0, params->xin_id, ot_lim);
+	return ot_lim;
+}
+
+/**
+ * dpu_vbif_set_ot_limit - set OT based on usecase & configuration parameters
+ * @vbif:	Pointer to hardware vbif driver
+ * @params:	Pointer to usecase parameters
+ *
+ * Note this function would block waiting for bus halt.
+ */
+void dpu_vbif_set_ot_limit(struct dpu_kms *dpu_kms,
+		struct dpu_vbif_set_ot_params *params)
+{
+	struct dpu_hw_vbif *vbif = NULL;
+	struct dpu_hw_mdp *mdp;
+	bool forced_on = false;
+	u32 ot_lim;
+	int ret, i;
+
+	if (!dpu_kms) {
+		DPU_ERROR("invalid arguments\n");
+		return;
+	}
+	mdp = dpu_kms->hw_mdp;
+
+	for (i = 0; i < ARRAY_SIZE(dpu_kms->hw_vbif); i++) {
+		if (dpu_kms->hw_vbif[i] &&
+				dpu_kms->hw_vbif[i]->idx == params->vbif_idx)
+			vbif = dpu_kms->hw_vbif[i];
+	}
+
+	if (!vbif || !mdp) {
+		DPU_DEBUG("invalid arguments vbif %d mdp %d\n",
+				vbif != 0, mdp != 0);
+		return;
+	}
+
+	if (!mdp->ops.setup_clk_force_ctrl ||
+			!vbif->ops.set_limit_conf ||
+			!vbif->ops.set_halt_ctrl)
+		return;
+
+	/* set write_gather_en for all write clients */
+	if (vbif->ops.set_write_gather_en && !params->rd)
+		vbif->ops.set_write_gather_en(vbif, params->xin_id);
+
+	ot_lim = _dpu_vbif_get_ot_limit(vbif, params) & 0xFF;
+
+	if (ot_lim == 0)
+		goto exit;
+
+	trace_dpu_perf_set_ot(params->num, params->xin_id, ot_lim,
+		params->vbif_idx);
+
+	forced_on = mdp->ops.setup_clk_force_ctrl(mdp, params->clk_ctrl, true);
+
+	vbif->ops.set_limit_conf(vbif, params->xin_id, params->rd, ot_lim);
+
+	vbif->ops.set_halt_ctrl(vbif, params->xin_id, true);
+
+	ret = _dpu_vbif_wait_for_xin_halt(vbif, params->xin_id);
+	if (ret)
+		trace_dpu_vbif_wait_xin_halt_fail(vbif->idx, params->xin_id);
+
+	vbif->ops.set_halt_ctrl(vbif, params->xin_id, false);
+
+	if (forced_on)
+		mdp->ops.setup_clk_force_ctrl(mdp, params->clk_ctrl, false);
+exit:
+	return;
+}
+
+void dpu_vbif_set_qos_remap(struct dpu_kms *dpu_kms,
+		struct dpu_vbif_set_qos_params *params)
+{
+	struct dpu_hw_vbif *vbif = NULL;
+	struct dpu_hw_mdp *mdp;
+	bool forced_on = false;
+	const struct dpu_vbif_qos_tbl *qos_tbl;
+	int i;
+
+	if (!dpu_kms || !params || !dpu_kms->hw_mdp) {
+		DPU_ERROR("invalid arguments\n");
+		return;
+	}
+	mdp = dpu_kms->hw_mdp;
+
+	for (i = 0; i < ARRAY_SIZE(dpu_kms->hw_vbif); i++) {
+		if (dpu_kms->hw_vbif[i] &&
+				dpu_kms->hw_vbif[i]->idx == params->vbif_idx) {
+			vbif = dpu_kms->hw_vbif[i];
+			break;
+		}
+	}
+
+	if (!vbif || !vbif->cap) {
+		DPU_ERROR("invalid vbif %d\n", params->vbif_idx);
+		return;
+	}
+
+	if (!vbif->ops.set_qos_remap || !mdp->ops.setup_clk_force_ctrl) {
+		DPU_DEBUG("qos remap not supported\n");
+		return;
+	}
+
+	qos_tbl = params->is_rt ? &vbif->cap->qos_rt_tbl :
+			&vbif->cap->qos_nrt_tbl;
+
+	if (!qos_tbl->npriority_lvl || !qos_tbl->priority_lvl) {
+		DPU_DEBUG("qos tbl not defined\n");
+		return;
+	}
+
+	forced_on = mdp->ops.setup_clk_force_ctrl(mdp, params->clk_ctrl, true);
+
+	for (i = 0; i < qos_tbl->npriority_lvl; i++) {
+		DPU_DEBUG("vbif:%d xin:%d lvl:%d/%d\n",
+				params->vbif_idx, params->xin_id, i,
+				qos_tbl->priority_lvl[i]);
+		vbif->ops.set_qos_remap(vbif, params->xin_id, i,
+				qos_tbl->priority_lvl[i]);
+	}
+
+	if (forced_on)
+		mdp->ops.setup_clk_force_ctrl(mdp, params->clk_ctrl, false);
+}
+
+void dpu_vbif_clear_errors(struct dpu_kms *dpu_kms)
+{
+	struct dpu_hw_vbif *vbif;
+	u32 i, pnd, src;
+
+	if (!dpu_kms) {
+		DPU_ERROR("invalid argument\n");
+		return;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(dpu_kms->hw_vbif); i++) {
+		vbif = dpu_kms->hw_vbif[i];
+		if (vbif && vbif->ops.clear_errors) {
+			vbif->ops.clear_errors(vbif, &pnd, &src);
+			if (pnd || src) {
+				DRM_DEBUG_KMS("VBIF %d: pnd 0x%X, src 0x%X\n",
+					      vbif->idx - VBIF_0, pnd, src);
+			}
+		}
+	}
+}
+
+void dpu_vbif_init_memtypes(struct dpu_kms *dpu_kms)
+{
+	struct dpu_hw_vbif *vbif;
+	int i, j;
+
+	if (!dpu_kms) {
+		DPU_ERROR("invalid argument\n");
+		return;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(dpu_kms->hw_vbif); i++) {
+		vbif = dpu_kms->hw_vbif[i];
+		if (vbif && vbif->cap && vbif->ops.set_mem_type) {
+			for (j = 0; j < vbif->cap->memtype_count; j++)
+				vbif->ops.set_mem_type(
+						vbif, j, vbif->cap->memtype[j]);
+		}
+	}
+}
+
+#ifdef CONFIG_DEBUG_FS
+void dpu_debugfs_vbif_destroy(struct dpu_kms *dpu_kms)
+{
+	debugfs_remove_recursive(dpu_kms->debugfs_vbif);
+	dpu_kms->debugfs_vbif = NULL;
+}
+
+int dpu_debugfs_vbif_init(struct dpu_kms *dpu_kms, struct dentry *debugfs_root)
+{
+	char vbif_name[32];
+	struct dentry *debugfs_vbif;
+	int i, j;
+
+	dpu_kms->debugfs_vbif = debugfs_create_dir("vbif", debugfs_root);
+	if (!dpu_kms->debugfs_vbif) {
+		DPU_ERROR("failed to create vbif debugfs\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < dpu_kms->catalog->vbif_count; i++) {
+		struct dpu_vbif_cfg *vbif = &dpu_kms->catalog->vbif[i];
+
+		snprintf(vbif_name, sizeof(vbif_name), "%d", vbif->id);
+
+		debugfs_vbif = debugfs_create_dir(vbif_name,
+				dpu_kms->debugfs_vbif);
+
+		debugfs_create_u32("features", 0600, debugfs_vbif,
+			(u32 *)&vbif->features);
+
+		debugfs_create_u32("xin_halt_timeout", 0400, debugfs_vbif,
+			(u32 *)&vbif->xin_halt_timeout);
+
+		debugfs_create_u32("default_rd_ot_limit", 0400, debugfs_vbif,
+			(u32 *)&vbif->default_ot_rd_limit);
+
+		debugfs_create_u32("default_wr_ot_limit", 0400, debugfs_vbif,
+			(u32 *)&vbif->default_ot_wr_limit);
+
+		for (j = 0; j < vbif->dynamic_ot_rd_tbl.count; j++) {
+			struct dpu_vbif_dynamic_ot_cfg *cfg =
+					&vbif->dynamic_ot_rd_tbl.cfg[j];
+
+			snprintf(vbif_name, sizeof(vbif_name),
+					"dynamic_ot_rd_%d_pps", j);
+			debugfs_create_u64(vbif_name, 0400, debugfs_vbif,
+					(u64 *)&cfg->pps);
+			snprintf(vbif_name, sizeof(vbif_name),
+					"dynamic_ot_rd_%d_ot_limit", j);
+			debugfs_create_u32(vbif_name, 0400, debugfs_vbif,
+					(u32 *)&cfg->ot_limit);
+		}
+
+		for (j = 0; j < vbif->dynamic_ot_wr_tbl.count; j++) {
+			struct dpu_vbif_dynamic_ot_cfg *cfg =
+					&vbif->dynamic_ot_wr_tbl.cfg[j];
+
+			snprintf(vbif_name, sizeof(vbif_name),
+					"dynamic_ot_wr_%d_pps", j);
+			debugfs_create_u64(vbif_name, 0400, debugfs_vbif,
+					(u64 *)&cfg->pps);
+			snprintf(vbif_name, sizeof(vbif_name),
+					"dynamic_ot_wr_%d_ot_limit", j);
+			debugfs_create_u32(vbif_name, 0400, debugfs_vbif,
+					(u32 *)&cfg->ot_limit);
+		}
+	}
+
+	return 0;
+}
+#endif