drm/msm: Add SDM845 DPU support

SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a
top level wrapper consisting of Display Processing Unit (DPU) and
display peripheral modules such as Display Serial Interface (DSI)
and DisplayPort (DP).

MDSS functions essentially as a back-end composition engine. It blends
video and graphic images stored in the frame buffers and scans out the
composed image to a display sink (over DSI/DP).

The following diagram represents hardware blocks for a simple pipeline
(two planes are present on a given crtc which is connected to a DSI
connector):

       MDSS
      +---------------------------------+
      | +-----------------------------+ |
      | | DPU                         | |
      | |  +--------+  +--------+     | |
      | |  |  SSPP  |  |  SSPP  |     | |
      | |  +----+---+  +----+---+     | |
      | |       |           |         | |
      | |  +----v-----------v---+     | |
      | |  |  Layer Mixer (LM)  |     | |
      | |  +--------------------+     | |
      | |  +--------------------+     | |
      | |  |    PingPong (PP)   |     | |
      | |  +--------------------+     | |
      | |  +--------------------+     | |
      | |  |  INTERFACE (VIDEO) |     | |
      | |  +---+----------------+     | |
      | +------|----------------------+ |
      |        |                        |
      | +------|---------------------+  |
      | |      | DISPLAY PERIPHERALS |  |
      | |  +---v-+      +-----+      |  |
      | |  | DSI |      |  DP |      |  |
      | |  +-----+      +-----+      |  |
      | +----------------------------+  |
      +---------------------------------+

The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs)
depends on SoC capabilities.

Overview of DPU sub-blocks:
---------------------------
* Source Surface Processor (SSPP):
 Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are
 capable of performing format conversion, scaling and quality improvement
 for source surfaces.

* Layer Mixer (LM):
 Blend source surfaces together (in requested zorder)

* PingPong (PP):
 This block controls frame done interrupt output, EOL and EOF generation,
 overflow/underflow control.

* Display interface (INTF):
 Timing generator and interface connecting the display peripherals.

DRM components mapping to DPU architecture:
------------------------------------------
PLANEs maps to SSPPs
CRTC maps to LMs
Encoder maps to PPs, INTFs

Data flow setup:
---------------
MDSS hardware can support various data flows (e.g.):
  - Dual pipe: Output from two LMs combined to single display.
  - Split display: Output from two LMs connected to two separate
                   interfaces.

The hardware capabilities determine the number of concurrent data paths
possible. Any control path (i.e. pipeline w/i DPU) can be routed to any
of the hardware data paths. A given control path can be triggered,
flushed and controlled independently.

Changes in v3:
- Move msm_media_info.h from uapi to dpu/ subdir
- Remove preclose callback dpu (it's handled in core)
- Fix kbuild warnings with parent_ops
- Remove unused functions from dpu_core_irq
- Rename mdss_phys to mdss
- Rename mdp_phys address space to mdp
- Drop _phys from vbif and regdma binding names

Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org>
Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
[robclark minor rebase]
Signed-off-by: Rob Clark <robdclark@gmail.com>

1 files changed, 128 insertions, 0 deletions

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h
new file mode 100644
index 000000000000..a79d735da68d
--- /dev/null
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h
@@ -0,0 +1,128 @@
+/* Copyright (c) 2015-2018, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DPU_HW_INTF_H
+#define _DPU_HW_INTF_H
+
+#include "dpu_hw_catalog.h"
+#include "dpu_hw_mdss.h"
+#include "dpu_hw_util.h"
+#include "dpu_hw_blk.h"
+
+struct dpu_hw_intf;
+
+/* intf timing settings */
+struct intf_timing_params {
+	u32 width;		/* active width */
+	u32 height;		/* active height */
+	u32 xres;		/* Display panel width */
+	u32 yres;		/* Display panel height */
+
+	u32 h_back_porch;
+	u32 h_front_porch;
+	u32 v_back_porch;
+	u32 v_front_porch;
+	u32 hsync_pulse_width;
+	u32 vsync_pulse_width;
+	u32 hsync_polarity;
+	u32 vsync_polarity;
+	u32 border_clr;
+	u32 underflow_clr;
+	u32 hsync_skew;
+};
+
+struct intf_prog_fetch {
+	u8 enable;
+	/* vsync counter for the front porch pixel line */
+	u32 fetch_start;
+};
+
+struct intf_status {
+	u8 is_en;		/* interface timing engine is enabled or not */
+	u32 frame_count;	/* frame count since timing engine enabled */
+	u32 line_count;		/* current line count including blanking */
+};
+
+/**
+ * struct dpu_hw_intf_ops : Interface to the interface Hw driver functions
+ *  Assumption is these functions will be called after clocks are enabled
+ * @ setup_timing_gen : programs the timing engine
+ * @ setup_prog_fetch : enables/disables the programmable fetch logic
+ * @ enable_timing: enable/disable timing engine
+ * @ get_status: returns if timing engine is enabled or not
+ * @ setup_misr: enables/disables MISR in HW register
+ * @ collect_misr: reads and stores MISR data from HW register
+ * @ get_line_count: reads current vertical line counter
+ */
+struct dpu_hw_intf_ops {
+	void (*setup_timing_gen)(struct dpu_hw_intf *intf,
+			const struct intf_timing_params *p,
+			const struct dpu_format *fmt);
+
+	void (*setup_prg_fetch)(struct dpu_hw_intf *intf,
+			const struct intf_prog_fetch *fetch);
+
+	void (*enable_timing)(struct dpu_hw_intf *intf,
+			u8 enable);
+
+	void (*get_status)(struct dpu_hw_intf *intf,
+			struct intf_status *status);
+
+	void (*setup_misr)(struct dpu_hw_intf *intf,
+			bool enable, u32 frame_count);
+
+	u32 (*collect_misr)(struct dpu_hw_intf *intf);
+
+	u32 (*get_line_count)(struct dpu_hw_intf *intf);
+};
+
+struct dpu_hw_intf {
+	struct dpu_hw_blk base;
+	struct dpu_hw_blk_reg_map hw;
+
+	/* intf */
+	enum dpu_intf idx;
+	const struct dpu_intf_cfg *cap;
+	const struct dpu_mdss_cfg *mdss;
+
+	/* ops */
+	struct dpu_hw_intf_ops ops;
+};
+
+/**
+ * to_dpu_hw_intf - convert base object dpu_hw_base to container
+ * @hw: Pointer to base hardware block
+ * return: Pointer to hardware block container
+ */
+static inline struct dpu_hw_intf *to_dpu_hw_intf(struct dpu_hw_blk *hw)
+{
+	return container_of(hw, struct dpu_hw_intf, base);
+}
+
+/**
+ * dpu_hw_intf_init(): Initializes the intf driver for the passed
+ * interface idx.
+ * @idx:  interface index for which driver object is required
+ * @addr: mapped register io address of MDP
+ * @m :   pointer to mdss catalog data
+ */
+struct dpu_hw_intf *dpu_hw_intf_init(enum dpu_intf idx,
+		void __iomem *addr,
+		struct dpu_mdss_cfg *m);
+
+/**
+ * dpu_hw_intf_destroy(): Destroys INTF driver context
+ * @intf:   Pointer to INTF driver context
+ */
+void dpu_hw_intf_destroy(struct dpu_hw_intf *intf);
+
+#endif /*_DPU_HW_INTF_H */