Merge drm-upstream/drm-next into drm-misc-next

We got a few conflicts in drm_atomic.c after merging the DRM writeback support,
now we need a backmerge to unlock develop development on drm-misc-next.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>

4 files changed, 731 insertions, 27 deletions

diff --git a/drivers/gpu/drm/i2c/Kconfig b/drivers/gpu/drm/i2c/Kconfig
index a6c92beb410a..65d3acb61c03 100644
--- a/drivers/gpu/drm/i2c/Kconfig
+++ b/drivers/gpu/drm/i2c/Kconfig
@@ -22,8 +22,14 @@ config DRM_I2C_SIL164
 config DRM_I2C_NXP_TDA998X
 	tristate "NXP Semiconductors TDA998X HDMI encoder"
 	default m if DRM_TILCDC
+	select CEC_CORE if CEC_NOTIFIER
 	select SND_SOC_HDMI_CODEC if SND_SOC
 	help
 	  Support for NXP Semiconductors TDA998X HDMI encoders.
 
+config DRM_I2C_NXP_TDA9950
+	tristate "NXP Semiconductors TDA9950/TDA998X HDMI CEC"
+	select CEC_NOTIFIER
+	select CEC_CORE
+
 endmenu
diff --git a/drivers/gpu/drm/i2c/Makefile b/drivers/gpu/drm/i2c/Makefile
index b20100c18ffb..a962f6f08568 100644
--- a/drivers/gpu/drm/i2c/Makefile
+++ b/drivers/gpu/drm/i2c/Makefile
@@ -7,3 +7,4 @@ obj-$(CONFIG_DRM_I2C_SIL164) += sil164.o
 
 tda998x-y := tda998x_drv.o
 obj-$(CONFIG_DRM_I2C_NXP_TDA998X) += tda998x.o
+obj-$(CONFIG_DRM_I2C_NXP_TDA9950) += tda9950.o
diff --git a/drivers/gpu/drm/i2c/tda9950.c b/drivers/gpu/drm/i2c/tda9950.c
new file mode 100644
index 000000000000..3f7396caad48
--- /dev/null
+++ b/drivers/gpu/drm/i2c/tda9950.c
@@ -0,0 +1,509 @@
+/*
+ *  TDA9950 Consumer Electronics Control driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The NXP TDA9950 implements the HDMI Consumer Electronics Control
+ * interface.  The host interface is similar to a mailbox: the data
+ * registers starting at REG_CDR0 are written to send a command to the
+ * internal CPU, and replies are read from these registers.
+ *
+ * As the data registers represent a mailbox, they must be accessed
+ * as a single I2C transaction.  See the TDA9950 data sheet for details.
+ */
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/platform_data/tda9950.h>
+#include <linux/slab.h>
+#include <drm/drm_edid.h>
+#include <media/cec.h>
+#include <media/cec-notifier.h>
+
+enum {
+	REG_CSR = 0x00,
+	CSR_BUSY = BIT(7),
+	CSR_INT  = BIT(6),
+	CSR_ERR  = BIT(5),
+
+	REG_CER = 0x01,
+
+	REG_CVR = 0x02,
+
+	REG_CCR = 0x03,
+	CCR_RESET = BIT(7),
+	CCR_ON    = BIT(6),
+
+	REG_ACKH = 0x04,
+	REG_ACKL = 0x05,
+
+	REG_CCONR = 0x06,
+	CCONR_ENABLE_ERROR = BIT(4),
+	CCONR_RETRY_MASK = 7,
+
+	REG_CDR0 = 0x07,
+
+	CDR1_REQ = 0x00,
+	CDR1_CNF = 0x01,
+	CDR1_IND = 0x81,
+	CDR1_ERR = 0x82,
+	CDR1_IER = 0x83,
+
+	CDR2_CNF_SUCCESS    = 0x00,
+	CDR2_CNF_OFF_STATE  = 0x80,
+	CDR2_CNF_BAD_REQ    = 0x81,
+	CDR2_CNF_CEC_ACCESS = 0x82,
+	CDR2_CNF_ARB_ERROR  = 0x83,
+	CDR2_CNF_BAD_TIMING = 0x84,
+	CDR2_CNF_NACK_ADDR  = 0x85,
+	CDR2_CNF_NACK_DATA  = 0x86,
+};
+
+struct tda9950_priv {
+	struct i2c_client *client;
+	struct device *hdmi;
+	struct cec_adapter *adap;
+	struct tda9950_glue *glue;
+	u16 addresses;
+	struct cec_msg rx_msg;
+	struct cec_notifier *notify;
+	bool open;
+};
+
+static int tda9950_write_range(struct i2c_client *client, u8 addr, u8 *p, int cnt)
+{
+	struct i2c_msg msg;
+	u8 buf[cnt + 1];
+	int ret;
+
+	buf[0] = addr;
+	memcpy(buf + 1, p, cnt);
+
+	msg.addr = client->addr;
+	msg.flags = 0;
+	msg.len = cnt + 1;
+	msg.buf = buf;
+
+	dev_dbg(&client->dev, "wr 0x%02x: %*ph\n", addr, cnt, p);
+
+	ret = i2c_transfer(client->adapter, &msg, 1);
+	if (ret < 0)
+		dev_err(&client->dev, "Error %d writing to cec:0x%x\n", ret, addr);
+	return ret < 0 ? ret : 0;
+}
+
+static void tda9950_write(struct i2c_client *client, u8 addr, u8 val)
+{
+	tda9950_write_range(client, addr, &val, 1);
+}
+
+static int tda9950_read_range(struct i2c_client *client, u8 addr, u8 *p, int cnt)
+{
+	struct i2c_msg msg[2];
+	int ret;
+
+	msg[0].addr = client->addr;
+	msg[0].flags = 0;
+	msg[0].len = 1;
+	msg[0].buf = &addr;
+	msg[1].addr = client->addr;
+	msg[1].flags = I2C_M_RD;
+	msg[1].len = cnt;
+	msg[1].buf = p;
+
+	ret = i2c_transfer(client->adapter, msg, 2);
+	if (ret < 0)
+		dev_err(&client->dev, "Error %d reading from cec:0x%x\n", ret, addr);
+
+	dev_dbg(&client->dev, "rd 0x%02x: %*ph\n", addr, cnt, p);
+
+	return ret;
+}
+
+static u8 tda9950_read(struct i2c_client *client, u8 addr)
+{
+	int ret;
+	u8 val;
+
+	ret = tda9950_read_range(client, addr, &val, 1);
+	if (ret < 0)
+		val = 0;
+
+	return val;
+}
+
+static irqreturn_t tda9950_irq(int irq, void *data)
+{
+	struct tda9950_priv *priv = data;
+	unsigned int tx_status;
+	u8 csr, cconr, buf[19];
+	u8 arb_lost_cnt, nack_cnt, err_cnt;
+
+	if (!priv->open)
+		return IRQ_NONE;
+
+	csr = tda9950_read(priv->client, REG_CSR);
+	if (!(csr & CSR_INT))
+		return IRQ_NONE;
+
+	cconr = tda9950_read(priv->client, REG_CCONR) & CCONR_RETRY_MASK;
+
+	tda9950_read_range(priv->client, REG_CDR0, buf, sizeof(buf));
+
+	/*
+	 * This should never happen: the data sheet says that there will
+	 * always be a valid message if the interrupt line is asserted.
+	 */
+	if (buf[0] == 0) {
+		dev_warn(&priv->client->dev, "interrupt pending, but no message?\n");
+		return IRQ_NONE;
+	}
+
+	switch (buf[1]) {
+	case CDR1_CNF: /* transmit result */
+		arb_lost_cnt = nack_cnt = err_cnt = 0;
+		switch (buf[2]) {
+		case CDR2_CNF_SUCCESS:
+			tx_status = CEC_TX_STATUS_OK;
+			break;
+
+		case CDR2_CNF_ARB_ERROR:
+			tx_status = CEC_TX_STATUS_ARB_LOST;
+			arb_lost_cnt = cconr;
+			break;
+
+		case CDR2_CNF_NACK_ADDR:
+			tx_status = CEC_TX_STATUS_NACK;
+			nack_cnt = cconr;
+			break;
+
+		default: /* some other error, refer to TDA9950 docs */
+			dev_err(&priv->client->dev, "CNF reply error 0x%02x\n",
+				buf[2]);
+			tx_status = CEC_TX_STATUS_ERROR;
+			err_cnt = cconr;
+			break;
+		}
+		/* TDA9950 executes all retries for us */
+		tx_status |= CEC_TX_STATUS_MAX_RETRIES;
+		cec_transmit_done(priv->adap, tx_status, arb_lost_cnt,
+				  nack_cnt, 0, err_cnt);
+		break;
+
+	case CDR1_IND:
+		priv->rx_msg.len = buf[0] - 2;
+		if (priv->rx_msg.len > CEC_MAX_MSG_SIZE)
+			priv->rx_msg.len = CEC_MAX_MSG_SIZE;
+
+		memcpy(priv->rx_msg.msg, buf + 2, priv->rx_msg.len);
+		cec_received_msg(priv->adap, &priv->rx_msg);
+		break;
+
+	default: /* unknown */
+		dev_err(&priv->client->dev, "unknown service id 0x%02x\n",
+			buf[1]);
+		break;
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int tda9950_cec_transmit(struct cec_adapter *adap, u8 attempts,
+				u32 signal_free_time, struct cec_msg *msg)
+{
+	struct tda9950_priv *priv = adap->priv;
+	u8 buf[CEC_MAX_MSG_SIZE + 2];
+
+	buf[0] = 2 + msg->len;
+	buf[1] = CDR1_REQ;
+	memcpy(buf + 2, msg->msg, msg->len);
+
+	if (attempts > 5)
+		attempts = 5;
+
+	tda9950_write(priv->client, REG_CCONR, attempts);
+
+	return tda9950_write_range(priv->client, REG_CDR0, buf, 2 + msg->len);
+}
+
+static int tda9950_cec_adap_log_addr(struct cec_adapter *adap, u8 addr)
+{
+	struct tda9950_priv *priv = adap->priv;
+	u16 addresses;
+	u8 buf[2];
+
+	if (addr == CEC_LOG_ADDR_INVALID)
+		addresses = priv->addresses = 0;
+	else
+		addresses = priv->addresses |= BIT(addr);
+
+	/* TDA9950 doesn't want address 15 set */
+	addresses &= 0x7fff;
+	buf[0] = addresses >> 8;
+	buf[1] = addresses;
+
+	return tda9950_write_range(priv->client, REG_ACKH, buf, 2);
+}
+
+/*
+ * When operating as part of the TDA998x, we need additional handling
+ * to initialise and shut down the TDA9950 part of the device.  These
+ * two hooks are provided to allow the TDA998x code to perform those
+ * activities.
+ */
+static int tda9950_glue_open(struct tda9950_priv *priv)
+{
+	int ret = 0;
+
+	if (priv->glue && priv->glue->open)
+		ret = priv->glue->open(priv->glue->data);
+
+	priv->open = true;
+
+	return ret;
+}
+
+static void tda9950_glue_release(struct tda9950_priv *priv)
+{
+	priv->open = false;
+
+	if (priv->glue && priv->glue->release)
+		priv->glue->release(priv->glue->data);
+}
+
+static int tda9950_open(struct tda9950_priv *priv)
+{
+	struct i2c_client *client = priv->client;
+	int ret;
+
+	ret = tda9950_glue_open(priv);
+	if (ret)
+		return ret;
+
+	/* Reset the TDA9950, and wait 250ms for it to recover */
+	tda9950_write(client, REG_CCR, CCR_RESET);
+	msleep(250);
+
+	tda9950_cec_adap_log_addr(priv->adap, CEC_LOG_ADDR_INVALID);
+
+	/* Start the command processor */
+	tda9950_write(client, REG_CCR, CCR_ON);
+
+	return 0;
+}
+
+static void tda9950_release(struct tda9950_priv *priv)
+{
+	struct i2c_client *client = priv->client;
+	int timeout = 50;
+	u8 csr;
+
+	/* Stop the command processor */
+	tda9950_write(client, REG_CCR, 0);
+
+	/* Wait up to .5s for it to signal non-busy */
+	do {
+		csr = tda9950_read(client, REG_CSR);
+		if (!(csr & CSR_BUSY) || --timeout)
+			break;
+		msleep(10);
+	} while (1);
+
+	/* Warn the user that their IRQ may die if it's shared. */
+	if (csr & CSR_BUSY)
+		dev_warn(&client->dev, "command processor failed to stop, irq%d may die (csr=0x%02x)\n",
+			 client->irq, csr);
+
+	tda9950_glue_release(priv);
+}
+
+static int tda9950_cec_adap_enable(struct cec_adapter *adap, bool enable)
+{
+	struct tda9950_priv *priv = adap->priv;
+
+	if (!enable) {
+		tda9950_release(priv);
+		return 0;
+	} else {
+		return tda9950_open(priv);
+	}
+}
+
+static const struct cec_adap_ops tda9950_cec_ops = {
+	.adap_enable = tda9950_cec_adap_enable,
+	.adap_log_addr = tda9950_cec_adap_log_addr,
+	.adap_transmit = tda9950_cec_transmit,
+};
+
+/*
+ * When operating as part of the TDA998x, we need to claim additional
+ * resources.  These two hooks permit the management of those resources.
+ */
+static void tda9950_devm_glue_exit(void *data)
+{
+	struct tda9950_glue *glue = data;
+
+	if (glue && glue->exit)
+		glue->exit(glue->data);
+}
+
+static int tda9950_devm_glue_init(struct device *dev, struct tda9950_glue *glue)
+{
+	int ret;
+
+	if (glue && glue->init) {
+		ret = glue->init(glue->data);
+		if (ret)
+			return ret;
+	}
+
+	ret = devm_add_action(dev, tda9950_devm_glue_exit, glue);
+	if (ret)
+		tda9950_devm_glue_exit(glue);
+
+	return ret;
+}
+
+static void tda9950_cec_del(void *data)
+{
+	struct tda9950_priv *priv = data;
+
+	cec_delete_adapter(priv->adap);
+}
+
+static int tda9950_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct tda9950_glue *glue = client->dev.platform_data;
+	struct device *dev = &client->dev;
+	struct tda9950_priv *priv;
+	unsigned long irqflags;
+	int ret;
+	u8 cvr;
+
+	/*
+	 * We must have I2C functionality: our multi-byte accesses
+	 * must be performed as a single contiguous transaction.
+	 */
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		dev_err(&client->dev,
+			"adapter does not support I2C functionality\n");
+		return -ENXIO;
+	}
+
+	/* We must have an interrupt to be functional. */
+	if (client->irq <= 0) {
+		dev_err(&client->dev, "driver requires an interrupt\n");
+		return -ENXIO;
+	}
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->client = client;
+	priv->glue = glue;
+
+	i2c_set_clientdata(client, priv);
+
+	/*
+	 * If we're part of a TDA998x, we want the class devices to be
+	 * associated with the HDMI Tx so we have a tight relationship
+	 * between the HDMI interface and the CEC interface.
+	 */
+	priv->hdmi = dev;
+	if (glue && glue->parent)
+		priv->hdmi = glue->parent;
+
+	priv->adap = cec_allocate_adapter(&tda9950_cec_ops, priv, "tda9950",
+					  CEC_CAP_DEFAULTS,
+					  CEC_MAX_LOG_ADDRS);
+	if (IS_ERR(priv->adap))
+		return PTR_ERR(priv->adap);
+
+	ret = devm_add_action(dev, tda9950_cec_del, priv);
+	if (ret) {
+		cec_delete_adapter(priv->adap);
+		return ret;
+	}
+
+	ret = tda9950_devm_glue_init(dev, glue);
+	if (ret)
+		return ret;
+
+	ret = tda9950_glue_open(priv);
+	if (ret)
+		return ret;
+
+	cvr = tda9950_read(client, REG_CVR);
+
+	dev_info(&client->dev,
+		 "TDA9950 CEC interface, hardware version %u.%u\n",
+		 cvr >> 4, cvr & 15);
+
+	tda9950_glue_release(priv);
+
+	irqflags = IRQF_TRIGGER_FALLING;
+	if (glue)
+		irqflags = glue->irq_flags;
+
+	ret = devm_request_threaded_irq(dev, client->irq, NULL, tda9950_irq,
+					irqflags | IRQF_SHARED | IRQF_ONESHOT,
+					dev_name(&client->dev), priv);
+	if (ret < 0)
+		return ret;
+
+	priv->notify = cec_notifier_get(priv->hdmi);
+	if (!priv->notify)
+		return -ENOMEM;
+
+	ret = cec_register_adapter(priv->adap, priv->hdmi);
+	if (ret < 0) {
+		cec_notifier_put(priv->notify);
+		return ret;
+	}
+
+	/*
+	 * CEC documentation says we must not call cec_delete_adapter
+	 * after a successful call to cec_register_adapter().
+	 */
+	devm_remove_action(dev, tda9950_cec_del, priv);
+
+	cec_register_cec_notifier(priv->adap, priv->notify);
+
+	return 0;
+}
+
+static int tda9950_remove(struct i2c_client *client)
+{
+	struct tda9950_priv *priv = i2c_get_clientdata(client);
+
+	cec_unregister_adapter(priv->adap);
+	cec_notifier_put(priv->notify);
+
+	return 0;
+}
+
+static struct i2c_device_id tda9950_ids[] = {
+	{ "tda9950", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, tda9950_ids);
+
+static struct i2c_driver tda9950_driver = {
+	.probe = tda9950_probe,
+	.remove = tda9950_remove,
+	.driver = {
+		.name = "tda9950",
+	},
+	.id_table = tda9950_ids,
+};
+
+module_i2c_driver(tda9950_driver);
+
+MODULE_AUTHOR("Russell King <rmk+kernel@armlinux.org.uk>");
+MODULE_DESCRIPTION("TDA9950/TDA998x Consumer Electronics Control Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
index 0068d714d1bd..0038c976536a 100644
--- a/drivers/gpu/drm/i2c/tda998x_drv.c
+++ b/drivers/gpu/drm/i2c/tda998x_drv.c
@@ -16,8 +16,10 @@
  */
 
 #include <linux/component.h>
+#include <linux/gpio/consumer.h>
 #include <linux/hdmi.h>
 #include <linux/module.h>
+#include <linux/platform_data/tda9950.h>
 #include <linux/irq.h>
 #include <sound/asoundef.h>
 #include <sound/hdmi-codec.h>
@@ -29,6 +31,8 @@
 #include <drm/drm_of.h>
 #include <drm/i2c/tda998x.h>
 
+#include <media/cec-notifier.h>
+
 #define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__)
 
 struct tda998x_audio_port {
@@ -55,6 +59,7 @@ struct tda998x_priv {
 	struct platform_device *audio_pdev;
 	struct mutex audio_mutex;
 
+	struct mutex edid_mutex;
 	wait_queue_head_t wq_edid;
 	volatile int wq_edid_wait;
 
@@ -67,6 +72,9 @@ struct tda998x_priv {
 	struct drm_connector connector;
 
 	struct tda998x_audio_port audio_port[2];
+	struct tda9950_glue cec_glue;
+	struct gpio_desc *calib;
+	struct cec_notifier *cec_notify;
 };
 
 #define conn_to_tda998x_priv(x) \
@@ -345,6 +353,12 @@ struct tda998x_priv {
 #define REG_CEC_INTSTATUS	  0xee		      /* read */
 # define CEC_INTSTATUS_CEC	  (1 << 0)
 # define CEC_INTSTATUS_HDMI	  (1 << 1)
+#define REG_CEC_CAL_XOSC_CTRL1    0xf2
+# define CEC_CAL_XOSC_CTRL1_ENA_CAL	BIT(0)
+#define REG_CEC_DES_FREQ2         0xf5
+# define CEC_DES_FREQ2_DIS_AUTOCAL BIT(7)
+#define REG_CEC_CLK               0xf6
+# define CEC_CLK_FRO              0x11
 #define REG_CEC_FRO_IM_CLK_CTRL   0xfb                /* read/write */
 # define CEC_FRO_IM_CLK_CTRL_GHOST_DIS (1 << 7)
 # define CEC_FRO_IM_CLK_CTRL_ENA_OTP   (1 << 6)
@@ -359,6 +373,7 @@ struct tda998x_priv {
 # define CEC_RXSHPDLEV_HPD        (1 << 1)
 
 #define REG_CEC_ENAMODS           0xff                /* read/write */
+# define CEC_ENAMODS_EN_CEC_CLK   (1 << 7)
 # define CEC_ENAMODS_DIS_FRO      (1 << 6)
 # define CEC_ENAMODS_DIS_CCLK     (1 << 5)
 # define CEC_ENAMODS_EN_RXSENS    (1 << 2)
@@ -417,6 +432,114 @@ cec_read(struct tda998x_priv *priv, u8 addr)
 	return val;
 }
 
+static void cec_enamods(struct tda998x_priv *priv, u8 mods, bool enable)
+{
+	int val = cec_read(priv, REG_CEC_ENAMODS);
+
+	if (val < 0)
+		return;
+
+	if (enable)
+		val |= mods;
+	else
+		val &= ~mods;
+
+	cec_write(priv, REG_CEC_ENAMODS, val);
+}
+
+static void tda998x_cec_set_calibration(struct tda998x_priv *priv, bool enable)
+{
+	if (enable) {
+		u8 val;
+
+		cec_write(priv, 0xf3, 0xc0);
+		cec_write(priv, 0xf4, 0xd4);
+
+		/* Enable automatic calibration mode */
+		val = cec_read(priv, REG_CEC_DES_FREQ2);
+		val &= ~CEC_DES_FREQ2_DIS_AUTOCAL;
+		cec_write(priv, REG_CEC_DES_FREQ2, val);
+
+		/* Enable free running oscillator */
+		cec_write(priv, REG_CEC_CLK, CEC_CLK_FRO);
+		cec_enamods(priv, CEC_ENAMODS_DIS_FRO, false);
+
+		cec_write(priv, REG_CEC_CAL_XOSC_CTRL1,
+			  CEC_CAL_XOSC_CTRL1_ENA_CAL);
+	} else {
+		cec_write(priv, REG_CEC_CAL_XOSC_CTRL1, 0);
+	}
+}
+
+/*
+ * Calibration for the internal oscillator: we need to set calibration mode,
+ * and then pulse the IRQ line low for a 10ms ± 1% period.
+ */
+static void tda998x_cec_calibration(struct tda998x_priv *priv)
+{
+	struct gpio_desc *calib = priv->calib;
+
+	mutex_lock(&priv->edid_mutex);
+	if (priv->hdmi->irq > 0)
+		disable_irq(priv->hdmi->irq);
+	gpiod_direction_output(calib, 1);
+	tda998x_cec_set_calibration(priv, true);
+
+	local_irq_disable();
+	gpiod_set_value(calib, 0);
+	mdelay(10);
+	gpiod_set_value(calib, 1);
+	local_irq_enable();
+
+	tda998x_cec_set_calibration(priv, false);
+	gpiod_direction_input(calib);
+	if (priv->hdmi->irq > 0)
+		enable_irq(priv->hdmi->irq);
+	mutex_unlock(&priv->edid_mutex);
+}
+
+static int tda998x_cec_hook_init(void *data)
+{
+	struct tda998x_priv *priv = data;
+	struct gpio_desc *calib;
+
+	calib = gpiod_get(&priv->hdmi->dev, "nxp,calib", GPIOD_ASIS);
+	if (IS_ERR(calib)) {
+		dev_warn(&priv->hdmi->dev, "failed to get calibration gpio: %ld\n",
+			 PTR_ERR(calib));
+		return PTR_ERR(calib);
+	}
+
+	priv->calib = calib;
+
+	return 0;
+}
+
+static void tda998x_cec_hook_exit(void *data)
+{
+	struct tda998x_priv *priv = data;
+
+	gpiod_put(priv->calib);
+	priv->calib = NULL;
+}
+
+static int tda998x_cec_hook_open(void *data)
+{
+	struct tda998x_priv *priv = data;
+
+	cec_enamods(priv, CEC_ENAMODS_EN_CEC_CLK | CEC_ENAMODS_EN_CEC, true);
+	tda998x_cec_calibration(priv);
+
+	return 0;
+}
+
+static void tda998x_cec_hook_release(void *data)
+{
+	struct tda998x_priv *priv = data;
+
+	cec_enamods(priv, CEC_ENAMODS_EN_CEC_CLK | CEC_ENAMODS_EN_CEC, false);
+}
+
 static int
 set_page(struct tda998x_priv *priv, u16 reg)
 {
@@ -666,10 +789,13 @@ static irqreturn_t tda998x_irq_thread(int irq, void *data)
 			sta, cec, lvl, flag0, flag1, flag2);
 
 		if (cec & CEC_RXSHPDINT_HPD) {
-			if (lvl & CEC_RXSHPDLEV_HPD)
+			if (lvl & CEC_RXSHPDLEV_HPD) {
 				tda998x_edid_delay_start(priv);
-			else
+			} else {
 				schedule_work(&priv->detect_work);
+				cec_notifier_set_phys_addr(priv->cec_notify,
+						   CEC_PHYS_ADDR_INVALID);
+			}
 
 			handled = true;
 		}
@@ -990,6 +1116,8 @@ static int tda998x_connector_fill_modes(struct drm_connector *connector,
 	if (connector->edid_blob_ptr) {
 		struct edid *edid = (void *)connector->edid_blob_ptr->data;
 
+		cec_notifier_set_phys_addr_from_edid(priv->cec_notify, edid);
+
 		priv->sink_has_audio = drm_detect_monitor_audio(edid);
 	} else {
 		priv->sink_has_audio = false;
@@ -1033,6 +1161,8 @@ static int read_edid_block(void *data, u8 *buf, unsigned int blk, size_t length)
 	offset = (blk & 1) ? 128 : 0;
 	segptr = blk / 2;
 
+	mutex_lock(&priv->edid_mutex);
+
 	reg_write(priv, REG_DDC_ADDR, 0xa0);
 	reg_write(priv, REG_DDC_OFFS, offset);
 	reg_write(priv, REG_DDC_SEGM_ADDR, 0x60);
@@ -1052,14 +1182,15 @@ static int read_edid_block(void *data, u8 *buf, unsigned int blk, size_t length)
 					msecs_to_jiffies(100));
 		if (i < 0) {
 			dev_err(&priv->hdmi->dev, "read edid wait err %d\n", i);
-			return i;
+			ret = i;
+			goto failed;
 		}
 	} else {
 		for (i = 100; i > 0; i--) {
 			msleep(1);
 			ret = reg_read(priv, REG_INT_FLAGS_2);
 			if (ret < 0)
-				return ret;
+				goto failed;
 			if (ret & INT_FLAGS_2_EDID_BLK_RD)
 				break;
 		}
@@ -1067,17 +1198,22 @@ static int read_edid_block(void *data, u8 *buf, unsigned int blk, size_t length)
 
 	if (i == 0) {
 		dev_err(&priv->hdmi->dev, "read edid timeout\n");
-		return -ETIMEDOUT;
+		ret = -ETIMEDOUT;
+		goto failed;
 	}
 
 	ret = reg_read_range(priv, REG_EDID_DATA_0, buf, length);
 	if (ret != length) {
 		dev_err(&priv->hdmi->dev, "failed to read edid block %d: %d\n",
 			blk, ret);
-		return ret;
+		goto failed;
 	}
 
-	return 0;
+	ret = 0;
+
+ failed:
+	mutex_unlock(&priv->edid_mutex);
+	return ret;
 }
 
 static int tda998x_connector_get_modes(struct drm_connector *connector)
@@ -1432,6 +1568,9 @@ static void tda998x_destroy(struct tda998x_priv *priv)
 	cancel_work_sync(&priv->detect_work);
 
 	i2c_unregister_device(priv->cec);
+
+	if (priv->cec_notify)
+		cec_notifier_put(priv->cec_notify);
 }
 
 /* I2C driver functions */
@@ -1481,10 +1620,16 @@ static int tda998x_get_audio_ports(struct tda998x_priv *priv,
 static int tda998x_create(struct i2c_client *client, struct tda998x_priv *priv)
 {
 	struct device_node *np = client->dev.of_node;
+	struct i2c_board_info cec_info;
 	u32 video;
 	int rev_lo, rev_hi, ret;
 
-	mutex_init(&priv->audio_mutex); /* Protect access from audio thread */
+	mutex_init(&priv->mutex);	/* protect the page access */
+	mutex_init(&priv->audio_mutex); /* protect access from audio thread */
+	mutex_init(&priv->edid_mutex);
+	init_waitqueue_head(&priv->edid_delay_waitq);
+	timer_setup(&priv->edid_delay_timer, tda998x_edid_delay_done, 0);
+	INIT_WORK(&priv->detect_work, tda998x_detect_work);
 
 	priv->vip_cntrl_0 = VIP_CNTRL_0_SWAP_A(2) | VIP_CNTRL_0_SWAP_B(3);
 	priv->vip_cntrl_1 = VIP_CNTRL_1_SWAP_C(0) | VIP_CNTRL_1_SWAP_D(1);
@@ -1494,14 +1639,6 @@ static int tda998x_create(struct i2c_client *client, struct tda998x_priv *priv)
 	priv->cec_addr = 0x34 + (client->addr & 0x03);
 	priv->current_page = 0xff;
 	priv->hdmi = client;
-	priv->cec = i2c_new_dummy(client->adapter, priv->cec_addr);
-	if (!priv->cec)
-		return -ENODEV;
-
-	mutex_init(&priv->mutex);	/* protect the page access */
-	init_waitqueue_head(&priv->edid_delay_waitq);
-	timer_setup(&priv->edid_delay_timer, tda998x_edid_delay_done, 0);
-	INIT_WORK(&priv->detect_work, tda998x_detect_work);
 
 	/* wake up the device: */
 	cec_write(priv, REG_CEC_ENAMODS,
@@ -1511,10 +1648,15 @@ static int tda998x_create(struct i2c_client *client, struct tda998x_priv *priv)
 
 	/* read version: */
 	rev_lo = reg_read(priv, REG_VERSION_LSB);
+	if (rev_lo < 0) {
+		dev_err(&client->dev, "failed to read version: %d\n", rev_lo);
+		return rev_lo;
+	}
+
 	rev_hi = reg_read(priv, REG_VERSION_MSB);
-	if (rev_lo < 0 || rev_hi < 0) {
-		ret = rev_lo < 0 ? rev_lo : rev_hi;
-		goto fail;
+	if (rev_hi < 0) {
+		dev_err(&client->dev, "failed to read version: %d\n", rev_hi);
+		return rev_hi;
 	}
 
 	priv->rev = rev_lo | rev_hi << 8;
@@ -1538,7 +1680,7 @@ static int tda998x_create(struct i2c_client *client, struct tda998x_priv *priv)
 	default:
 		dev_err(&client->dev, "found unsupported device: %04x\n",
 			priv->rev);
-		goto fail;
+		return -ENXIO;
 	}
 
 	/* after reset, enable DDC: */
@@ -1554,6 +1696,15 @@ static int tda998x_create(struct i2c_client *client, struct tda998x_priv *priv)
 	cec_write(priv, REG_CEC_FRO_IM_CLK_CTRL,
 			CEC_FRO_IM_CLK_CTRL_GHOST_DIS | CEC_FRO_IM_CLK_CTRL_IMCLK_SEL);
 
+	/* ensure interrupts are disabled */
+	cec_write(priv, REG_CEC_RXSHPDINTENA, 0);
+
+	/* clear pending interrupts */
+	cec_read(priv, REG_CEC_RXSHPDINT);
+	reg_read(priv, REG_INT_FLAGS_0);
+	reg_read(priv, REG_INT_FLAGS_1);
+	reg_read(priv, REG_INT_FLAGS_2);
+
 	/* initialize the optional IRQ */
 	if (client->irq) {
 		unsigned long irq_flags;
@@ -1561,13 +1712,11 @@ static int tda998x_create(struct i2c_client *client, struct tda998x_priv *priv)
 		/* init read EDID waitqueue and HDP work */
 		init_waitqueue_head(&priv->wq_edid);
 
-		/* clear pending interrupts */
-		reg_read(priv, REG_INT_FLAGS_0);
-		reg_read(priv, REG_INT_FLAGS_1);
-		reg_read(priv, REG_INT_FLAGS_2);
-
 		irq_flags =
 			irqd_get_trigger_type(irq_get_irq_data(client->irq));
+
+		priv->cec_glue.irq_flags = irq_flags;
+
 		irq_flags |= IRQF_SHARED | IRQF_ONESHOT;
 		ret = request_threaded_irq(client->irq, NULL,
 					   tda998x_irq_thread, irq_flags,
@@ -1576,13 +1725,46 @@ static int tda998x_create(struct i2c_client *client, struct tda998x_priv *priv)
 			dev_err(&client->dev,
 				"failed to request IRQ#%u: %d\n",
 				client->irq, ret);
-			goto fail;
+			goto err_irq;
 		}
 
 		/* enable HPD irq */
 		cec_write(priv, REG_CEC_RXSHPDINTENA, CEC_RXSHPDLEV_HPD);
 	}
 
+	priv->cec_notify = cec_notifier_get(&client->dev);
+	if (!priv->cec_notify) {
+		ret = -ENOMEM;
+		goto fail;
+	}
+
+	priv->cec_glue.parent = &client->dev;
+	priv->cec_glue.data = priv;
+	priv->cec_glue.init = tda998x_cec_hook_init;
+	priv->cec_glue.exit = tda998x_cec_hook_exit;
+	priv->cec_glue.open = tda998x_cec_hook_open;
+	priv->cec_glue.release = tda998x_cec_hook_release;
+
+	/*
+	 * Some TDA998x are actually two I2C devices merged onto one piece
+	 * of silicon: TDA9989 and TDA19989 combine the HDMI transmitter
+	 * with a slightly modified TDA9950 CEC device.  The CEC device
+	 * is at the TDA9950 address, with the address pins strapped across
+	 * to the TDA998x address pins.  Hence, it always has the same
+	 * offset.
+	 */
+	memset(&cec_info, 0, sizeof(cec_info));
+	strlcpy(cec_info.type, "tda9950", sizeof(cec_info.type));
+	cec_info.addr = priv->cec_addr;
+	cec_info.platform_data = &priv->cec_glue;
+	cec_info.irq = client->irq;
+
+	priv->cec = i2c_new_device(client->adapter, &cec_info);
+	if (!priv->cec) {
+		ret = -ENODEV;
+		goto fail;
+	}
+
 	/* enable EDID read irq: */
 	reg_set(priv, REG_INT_FLAGS_2, INT_FLAGS_2_EDID_BLK_RD);
 
@@ -1605,12 +1787,18 @@ static int tda998x_create(struct i2c_client *client, struct tda998x_priv *priv)
 		tda998x_audio_codec_init(priv, &client->dev);
 
 	return 0;
+
 fail:
 	/* if encoder_init fails, the encoder slave is never registered,
 	 * so cleanup here:
 	 */
 	i2c_unregister_device(priv->cec);
-	return -ENXIO;
+	if (priv->cec_notify)
+		cec_notifier_put(priv->cec_notify);
+	if (client->irq)
+		free_irq(client->irq, priv);
+err_irq:
+	return ret;
 }
 
 static void tda998x_encoder_prepare(struct drm_encoder *encoder)