Merge tag 'drm-next-2018-10-24' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
 "This is going to rebuild more than drm as it adds a new helper to
  list.h for doing bulk updates. Seemed like a reasonable addition to
  me.

  Otherwise the usual merge window stuff lots of i915 and amdgpu, not so
  much nouveau, and piles of everything else.

  Core:
   - Adds a new list.h helper for doing bulk list updates for TTM.
   - Don't leak fb address in smem_start to userspace (comes with EXPORT
     workaround for people using mali out of tree hacks)
   - udmabuf device to turn memfd regions into dma-buf
   - Per-plane blend mode property
   - ref/unref replacements with get/put
   - fbdev conflicting framebuffers code cleaned up
   - host-endian format variants
   - panel orientation quirk for Acer One 10

  bridge:
   - TI SN65DSI86 chip support

  vkms:
   - GEM support.
   - Cursor support

  amdgpu:
   - Merge amdkfd and amdgpu into one module
   - CEC over DP AUX support
   - Picasso APU support + VCN dynamic powergating
   - Raven2 APU support
   - Vega20 enablement + kfd support
   - ACP powergating improvements
   - ABGR/XBGR display support
   - VCN jpeg support
   - xGMI support
   - DC i2c/aux cleanup
   - Ycbcr 4:2:0 support
   - GPUVM improvements
   - Powerplay and powerplay endian fixes
   - Display underflow fixes

  vmwgfx:
   - Move vmwgfx specific TTM code to vmwgfx
   - Split out vmwgfx buffer/resource validation code
   - Atomic operation rework

  bochs:
   - use more helpers
   - format/byteorder improvements

  qxl:
   - use more helpers

  i915:
   - GGTT coherency getparam
   - Turn off resource streamer API
   - More Icelake enablement + DMC firmware
   - Full PPGTT for Ivybridge, Haswell and Valleyview
   - DDB distribution based on resolution
   - Limited range DP display support

  nouveau:
   - CEC over DP AUX support
   - Initial HDMI 2.0 support

  virtio-gpu:
   - vmap support for PRIME objects

  tegra:
   - Initial Tegra194 support
   - DMA/IOMMU integration fixes

  msm:
   - a6xx perf improvements + clock prefix
   - GPU preemption optimisations
   - a6xx devfreq support
   - cursor support

  rockchip:
   - PX30 support
   - rgb output interface support

  mediatek:
   - HDMI output support on mt2701 and mt7623

  rcar-du:
   - Interlaced modes on Gen3
   - LVDS on R8A77980
   - D3 and E3 SoC support

  hisilicon:
   - misc fixes

  mxsfb:
   - runtime pm support

  sun4i:
   - R40 TCON support
   - Allwinner A64 support
   - R40 HDMI support

  omapdrm:
   - Driver rework changing display pipeline ordering to use common code
   - DMM memory barrier and irq fixes
   - Errata workarounds

  exynos:
   - out-bridge support for LVDS bridge driver
   - Samsung 16x16 tiled format support
   - Plane alpha and pixel blend mode support

  tilcdc:
   - suspend/resume update

  mali-dp:
   - misc updates"

* tag 'drm-next-2018-10-24' of git://anongit.freedesktop.org/drm/drm: (1382 commits)
  firmware/dmc/icl: Add missing MODULE_FIRMWARE() for Icelake.
  drm/i915/icl: Fix signal_levels
  drm/i915/icl: Fix DDI/TC port clk_off bits
  drm/i915/icl: create function to identify combophy port
  drm/i915/gen9+: Fix initial readout for Y tiled framebuffers
  drm/i915: Large page offsets for pread/pwrite
  drm/i915/selftests: Disable shrinker across mmap-exhaustion
  drm/i915/dp: Link train Fallback on eDP only if fallback link BW can fit panel's native mode
  drm/i915: Fix intel_dp_mst_best_encoder()
  drm/i915: Skip vcpi allocation for MSTB ports that are gone
  drm/i915: Don't unset intel_connector->mst_port
  drm/i915: Only reset seqno if actually idle
  drm/i915: Use the correct crtc when sanitizing plane mapping
  drm/i915: Restore vblank interrupts earlier
  drm/i915: Check fb stride against plane max stride
  drm/amdgpu/vcn:Fix uninitialized symbol error
  drm: panel-orientation-quirks: Add quirk for Acer One 10 (S1003)
  drm/amd/amdgpu: Fix debugfs error handling
  drm/amdgpu: Update gc_9_0 golden settings.
  drm/amd/powerplay: update PPtable with DC BTC and Tvr SocLimit fields
  ...

1 files changed, 19 insertions, 7 deletions

diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_dpp.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_dpp.c
index bf8b68f8db4f..dcb3c5530236 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_dpp.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_dpp.c
@@ -103,6 +103,8 @@ void dpp_read_state(struct dpp *dpp_base,
 {
 	struct dcn10_dpp *dpp = TO_DCN10_DPP(dpp_base);
 
+	REG_GET(DPP_CONTROL,
+			DPP_CLOCK_ENABLE, &s->is_enabled);
 	REG_GET(CM_IGAM_CONTROL,
 			CM_IGAM_LUT_MODE, &s->igam_lut_mode);
 	REG_GET(CM_IGAM_CONTROL,
@@ -114,12 +116,14 @@ void dpp_read_state(struct dpp *dpp_base,
 	REG_GET(CM_GAMUT_REMAP_CONTROL,
 			CM_GAMUT_REMAP_MODE, &s->gamut_remap_mode);
 
-	s->gamut_remap_c11_c12 = REG_READ(CM_GAMUT_REMAP_C11_C12);
-	s->gamut_remap_c13_c14 = REG_READ(CM_GAMUT_REMAP_C13_C14);
-	s->gamut_remap_c21_c22 = REG_READ(CM_GAMUT_REMAP_C21_C22);
-	s->gamut_remap_c23_c24 = REG_READ(CM_GAMUT_REMAP_C23_C24);
-	s->gamut_remap_c31_c32 = REG_READ(CM_GAMUT_REMAP_C31_C32);
-	s->gamut_remap_c33_c34 = REG_READ(CM_GAMUT_REMAP_C33_C34);
+	if (s->gamut_remap_mode) {
+		s->gamut_remap_c11_c12 = REG_READ(CM_GAMUT_REMAP_C11_C12);
+		s->gamut_remap_c13_c14 = REG_READ(CM_GAMUT_REMAP_C13_C14);
+		s->gamut_remap_c21_c22 = REG_READ(CM_GAMUT_REMAP_C21_C22);
+		s->gamut_remap_c23_c24 = REG_READ(CM_GAMUT_REMAP_C23_C24);
+		s->gamut_remap_c31_c32 = REG_READ(CM_GAMUT_REMAP_C31_C32);
+		s->gamut_remap_c33_c34 = REG_READ(CM_GAMUT_REMAP_C33_C34);
+	}
 }
 
 /* Program gamut remap in bypass mode */
@@ -442,10 +446,12 @@ void dpp1_set_cursor_position(
 		struct dpp *dpp_base,
 		const struct dc_cursor_position *pos,
 		const struct dc_cursor_mi_param *param,
-		uint32_t width)
+		uint32_t width,
+		uint32_t height)
 {
 	struct dcn10_dpp *dpp = TO_DCN10_DPP(dpp_base);
 	int src_x_offset = pos->x - pos->x_hotspot - param->viewport.x;
+	int src_y_offset = pos->y - pos->y_hotspot - param->viewport.y;
 	uint32_t cur_en = pos->enable ? 1 : 0;
 
 	if (src_x_offset >= (int)param->viewport.width)
@@ -454,6 +460,12 @@ void dpp1_set_cursor_position(
 	if (src_x_offset + (int)width <= 0)
 		cur_en = 0;  /* not visible beyond left edge*/
 
+	if (src_y_offset >= (int)param->viewport.height)
+		cur_en = 0;  /* not visible beyond bottom edge*/
+
+	if (src_y_offset < 0)
+		cur_en = 0;  /* not visible beyond top edge*/
+
 	REG_UPDATE(CURSOR0_CONTROL,
 			CUR0_ENABLE, cur_en);