Merge tag 'drm-next-2021-08-31-1' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
 "Highlights:

   - i915 has seen a lot of refactoring and uAPI cleanups due to a
     change in the upstream direction going forward

     This has all been audited with known userspace, but there may be
     some pitfalls that were missed.

   - i915 now uses common TTM to enable discrete memory on DG1/2 GPUs

   - i915 enables Jasper and Elkhart Lake by default and has preliminary
     XeHP/DG2 support

   - amdgpu adds support for Cyan Skillfish

   - lots of implicit fencing rules documented and fixed up in drivers

   - msm now uses the core scheduler

   - the irq midlayer has been removed for non-legacy drivers

   - the sysfb code now works on more than x86.

  Otherwise the usual smattering of stuff everywhere, panels, bridges,
  refactorings.

  Detailed summary:

  core:
   - extract i915 eDP backlight into core
   - DP aux bus support
   - drm_device.irq_enabled removed
   - port drivers to native irq interfaces
   - export gem shadow plane handling for vgem
   - print proper driver name in framebuffer registration
   - driver fixes for implicit fencing rules
   - ARM fixed rate compression modifier added
   - updated fb damage handling
   - rmfb ioctl logging/docs
   - drop drm_gem_object_put_locked
   - define DRM_FORMAT_MAX_PLANES
   - add gem fb vmap/vunmap helpers
   - add lockdep_assert(once) helpers
   - mark drm irq midlayer as legacy
   - use offset adjusted bo mapping conversion

  vgaarb:
   - cleanups

  fbdev:
   - extend efifb handling to all arches
   - div by 0 fixes for multiple drivers

  udmabuf:
   - add hugepage mapping support

  dma-buf:
   - non-dynamic exporter fixups
   - document implicit fencing rules

  amdgpu:
   - Initial Cyan Skillfish support
   - switch virtual DCE over to vkms based atomic
   - VCN/JPEG power down fixes
   - NAVI PCIE link handling fixes
   - AMD HDMI freesync fixes
   - Yellow Carp + Beige Goby fixes
   - Clockgating/S0ix/SMU/EEPROM fixes
   - embed hw fence in job
   - rework dma-resv handling
   - ensure eviction to system ram

  amdkfd:
   - uapi: SVM address range query added
   - sysfs leak fix
   - GPUVM TLB optimizations
   - vmfault/migration counters

  i915:
   - Enable JSL and EHL by default
   - preliminary XeHP/DG2 support
   - remove all CNL support (never shipped)
   - move to TTM for discrete memory support
   - allow mixed object mmap handling
   - GEM uAPI spring cleaning
       - add I915_MMAP_OBJECT_FIXED
       - reinstate ADL-P mmap ioctls
       - drop a bunch of unused by userspace features
       - disable and remove GPU relocations
   - revert some i915 misfeatures
   - major refactoring of GuC for Gen11+
   - execbuffer object locking separate step
   - reject caching/set-domain on discrete
   - Enable pipe DMC loading on XE-LPD and ADL-P
   - add PSF GV point support
   - Refactor and fix DDI buffer translations
   - Clean up FBC CFB allocation code
   - Finish INTEL_GEN() and friends macro conversions

  nouveau:
   - add eDP backlight support
   - implicit fence fix

  msm:
   - a680/7c3 support
   - drm/scheduler conversion

  panfrost:
   - rework GPU reset

  virtio:
   - fix fencing for planes

  ast:
   - add detect support

  bochs:
   - move to tiny GPU driver

  vc4:
   - use hotplug irqs
   - HDMI codec support

  vmwgfx:
   - use internal vmware device headers

  ingenic:
   - demidlayering irq

  rcar-du:
   - shutdown fixes
   - convert to bridge connector helpers

  zynqmp-dsub:
   - misc fixes

  mgag200:
   - convert PLL handling to atomic

  mediatek:
   - MT8133 AAL support
   - gem mmap object support
   - MT8167 support

  etnaviv:
   - NXP Layerscape LS1028A SoC support
   - GEM mmap cleanups

  tegra:
   - new user API

  exynos:
   - missing unlock fix
   - build warning fix
   - use refcount_t"

* tag 'drm-next-2021-08-31-1' of git://anongit.freedesktop.org/drm/drm: (1318 commits)
  drm/amd/display: Move AllowDRAMSelfRefreshOrDRAMClockChangeInVblank to bounding box
  drm/amd/display: Remove duplicate dml init
  drm/amd/display: Update bounding box states (v2)
  drm/amd/display: Update number of DCN3 clock states
  drm/amdgpu: disable GFX CGCG in aldebaran
  drm/amdgpu: Clear RAS interrupt status on aldebaran
  drm/amdgpu: Add support for RAS XGMI err query
  drm/amdkfd: Account for SH/SE count when setting up cu masks.
  drm/amdgpu: rename amdgpu_bo_get_preferred_pin_domain
  drm/amdgpu: drop redundant cancel_delayed_work_sync call
  drm/amdgpu: add missing cleanups for more ASICs on UVD/VCE suspend
  drm/amdgpu: add missing cleanups for Polaris12 UVD/VCE on suspend
  drm/amdkfd: map SVM range with correct access permission
  drm/amdkfd: check access permisson to restore retry fault
  drm/amdgpu: Update RAS XGMI Error Query
  drm/amdgpu: Add driver infrastructure for MCA RAS
  drm/amd/display: Add Logging for HDMI color depth information
  drm/amd/amdgpu: consolidate PSP TA init shared buf functions
  drm/amd/amdgpu: add name field back to ras_common_if
  drm/amdgpu: Fix build with missing pm_suspend_target_state module export
  ...

7 files changed, 601 insertions, 90 deletions

diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index 1db738d5b301..5d3fd803d2bb 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -251,6 +251,38 @@ config QCOM_SCM_DOWNLOAD_MODE_DEFAULT
 
 	  Say Y here to enable "download mode" by default.
 
+config SYSFB
+	bool
+	default y
+	depends on X86 || EFI
+
+config SYSFB_SIMPLEFB
+	bool "Mark VGA/VBE/EFI FB as generic system framebuffer"
+	depends on SYSFB
+	help
+	  Firmwares often provide initial graphics framebuffers so the BIOS,
+	  bootloader or kernel can show basic video-output during boot for
+	  user-guidance and debugging. Historically, x86 used the VESA BIOS
+	  Extensions and EFI-framebuffers for this, which are mostly limited
+	  to x86 BIOS or EFI systems.
+	  This option, if enabled, marks VGA/VBE/EFI framebuffers as generic
+	  framebuffers so the new generic system-framebuffer drivers can be
+	  used instead. If the framebuffer is not compatible with the generic
+	  modes, it is advertised as fallback platform framebuffer so legacy
+	  drivers like efifb, vesafb and uvesafb can pick it up.
+	  If this option is not selected, all system framebuffers are always
+	  marked as fallback platform framebuffers as usual.
+
+	  Note: Legacy fbdev drivers, including vesafb, efifb, uvesafb, will
+	  not be able to pick up generic system framebuffers if this option
+	  is selected. You are highly encouraged to enable simplefb as
+	  replacement if you select this option. simplefb can correctly deal
+	  with generic system framebuffers. But you should still keep vesafb
+	  and others enabled as fallback if a system framebuffer is
+	  incompatible with simplefb.
+
+	  If unsure, say Y.
+
 config TI_SCI_PROTOCOL
 	tristate "TI System Control Interface (TISCI) Message Protocol"
 	depends on TI_MESSAGE_MANAGER
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 546ac8e7f6d0..705fabe88156 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -18,6 +18,8 @@ obj-$(CONFIG_FIRMWARE_MEMMAP)	+= memmap.o
 obj-$(CONFIG_RASPBERRYPI_FIRMWARE) += raspberrypi.o
 obj-$(CONFIG_FW_CFG_SYSFS)	+= qemu_fw_cfg.o
 obj-$(CONFIG_QCOM_SCM)		+= qcom_scm.o qcom_scm-smc.o qcom_scm-legacy.o
+obj-$(CONFIG_SYSFB)		+= sysfb.o
+obj-$(CONFIG_SYSFB_SIMPLEFB)	+= sysfb_simplefb.o
 obj-$(CONFIG_TI_SCI_PROTOCOL)	+= ti_sci.o
 obj-$(CONFIG_TRUSTED_FOUNDATIONS) += trusted_foundations.o
 obj-$(CONFIG_TURRIS_MOX_RWTM)	+= turris-mox-rwtm.o
diff --git a/drivers/firmware/efi/Makefile b/drivers/firmware/efi/Makefile
index 467e94259679..c02ff25dd477 100644
--- a/drivers/firmware/efi/Makefile
+++ b/drivers/firmware/efi/Makefile
@@ -36,6 +36,8 @@ obj-$(CONFIG_LOAD_UEFI_KEYS)		+= mokvar-table.o
 fake_map-y				+= fake_mem.o
 fake_map-$(CONFIG_X86)			+= x86_fake_mem.o
 
+obj-$(CONFIG_SYSFB)			+= sysfb_efi.o
+
 arm-obj-$(CONFIG_EFI)			:= efi-init.o arm-runtime.o
 obj-$(CONFIG_ARM)			+= $(arm-obj-y)
 obj-$(CONFIG_ARM64)			+= $(arm-obj-y)
diff --git a/drivers/firmware/efi/efi-init.c b/drivers/firmware/efi/efi-init.c
index a552a08a1741..b19ce1a83f91 100644
--- a/drivers/firmware/efi/efi-init.c
+++ b/drivers/firmware/efi/efi-init.c
@@ -275,93 +275,3 @@ void __init efi_init(void)
 	}
 #endif
 }
-
-static bool efifb_overlaps_pci_range(const struct of_pci_range *range)
-{
-	u64 fb_base = screen_info.lfb_base;
-
-	if (screen_info.capabilities & VIDEO_CAPABILITY_64BIT_BASE)
-		fb_base |= (u64)(unsigned long)screen_info.ext_lfb_base << 32;
-
-	return fb_base >= range->cpu_addr &&
-	       fb_base < (range->cpu_addr + range->size);
-}
-
-static struct device_node *find_pci_overlap_node(void)
-{
-	struct device_node *np;
-
-	for_each_node_by_type(np, "pci") {
-		struct of_pci_range_parser parser;
-		struct of_pci_range range;
-		int err;
-
-		err = of_pci_range_parser_init(&parser, np);
-		if (err) {
-			pr_warn("of_pci_range_parser_init() failed: %d\n", err);
-			continue;
-		}
-
-		for_each_of_pci_range(&parser, &range)
-			if (efifb_overlaps_pci_range(&range))
-				return np;
-	}
-	return NULL;
-}
-
-/*
- * If the efifb framebuffer is backed by a PCI graphics controller, we have
- * to ensure that this relation is expressed using a device link when
- * running in DT mode, or the probe order may be reversed, resulting in a
- * resource reservation conflict on the memory window that the efifb
- * framebuffer steals from the PCIe host bridge.
- */
-static int efifb_add_links(struct fwnode_handle *fwnode)
-{
-	struct device_node *sup_np;
-
-	sup_np = find_pci_overlap_node();
-
-	/*
-	 * If there's no PCI graphics controller backing the efifb, we are
-	 * done here.
-	 */
-	if (!sup_np)
-		return 0;
-
-	fwnode_link_add(fwnode, of_fwnode_handle(sup_np));
-	of_node_put(sup_np);
-
-	return 0;
-}
-
-static const struct fwnode_operations efifb_fwnode_ops = {
-	.add_links = efifb_add_links,
-};
-
-static struct fwnode_handle efifb_fwnode;
-
-static int __init register_gop_device(void)
-{
-	struct platform_device *pd;
-	int err;
-
-	if (screen_info.orig_video_isVGA != VIDEO_TYPE_EFI)
-		return 0;
-
-	pd = platform_device_alloc("efi-framebuffer", 0);
-	if (!pd)
-		return -ENOMEM;
-
-	if (IS_ENABLED(CONFIG_PCI)) {
-		fwnode_init(&efifb_fwnode, &efifb_fwnode_ops);
-		pd->dev.fwnode = &efifb_fwnode;
-	}
-
-	err = platform_device_add_data(pd, &screen_info, sizeof(screen_info));
-	if (err)
-		return err;
-
-	return platform_device_add(pd);
-}
-subsys_initcall(register_gop_device);
diff --git a/drivers/firmware/efi/sysfb_efi.c b/drivers/firmware/efi/sysfb_efi.c
new file mode 100644
index 000000000000..4c7c9dd7733f
--- /dev/null
+++ b/drivers/firmware/efi/sysfb_efi.c
@@ -0,0 +1,358 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Generic System Framebuffers
+ * Copyright (c) 2012-2013 David Herrmann <dh.herrmann@gmail.com>
+ *
+ * EFI Quirks Copyright (c) 2006 Edgar Hucek <gimli@dark-green.com>
+ */
+
+/*
+ * EFI Quirks
+ * Several EFI systems do not correctly advertise their boot framebuffers.
+ * Hence, we use this static table of known broken machines and fix up the
+ * information so framebuffer drivers can load correctly.
+ */
+
+#include <linux/dmi.h>
+#include <linux/err.h>
+#include <linux/efi.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/of_address.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/screen_info.h>
+#include <linux/sysfb.h>
+#include <video/vga.h>
+
+#include <asm/efi.h>
+
+enum {
+	OVERRIDE_NONE = 0x0,
+	OVERRIDE_BASE = 0x1,
+	OVERRIDE_STRIDE = 0x2,
+	OVERRIDE_HEIGHT = 0x4,
+	OVERRIDE_WIDTH = 0x8,
+};
+
+struct efifb_dmi_info efifb_dmi_list[] = {
+	[M_I17] = { "i17", 0x80010000, 1472 * 4, 1440, 900, OVERRIDE_NONE },
+	[M_I20] = { "i20", 0x80010000, 1728 * 4, 1680, 1050, OVERRIDE_NONE }, /* guess */
+	[M_I20_SR] = { "imac7", 0x40010000, 1728 * 4, 1680, 1050, OVERRIDE_NONE },
+	[M_I24] = { "i24", 0x80010000, 2048 * 4, 1920, 1200, OVERRIDE_NONE }, /* guess */
+	[M_I24_8_1] = { "imac8", 0xc0060000, 2048 * 4, 1920, 1200, OVERRIDE_NONE },
+	[M_I24_10_1] = { "imac10", 0xc0010000, 2048 * 4, 1920, 1080, OVERRIDE_NONE },
+	[M_I27_11_1] = { "imac11", 0xc0010000, 2560 * 4, 2560, 1440, OVERRIDE_NONE },
+	[M_MINI]= { "mini", 0x80000000, 2048 * 4, 1024, 768, OVERRIDE_NONE },
+	[M_MINI_3_1] = { "mini31", 0x40010000, 1024 * 4, 1024, 768, OVERRIDE_NONE },
+	[M_MINI_4_1] = { "mini41", 0xc0010000, 2048 * 4, 1920, 1200, OVERRIDE_NONE },
+	[M_MB] = { "macbook", 0x80000000, 2048 * 4, 1280, 800, OVERRIDE_NONE },
+	[M_MB_5_1] = { "macbook51", 0x80010000, 2048 * 4, 1280, 800, OVERRIDE_NONE },
+	[M_MB_6_1] = { "macbook61", 0x80010000, 2048 * 4, 1280, 800, OVERRIDE_NONE },
+	[M_MB_7_1] = { "macbook71", 0x80010000, 2048 * 4, 1280, 800, OVERRIDE_NONE },
+	[M_MBA] = { "mba", 0x80000000, 2048 * 4, 1280, 800, OVERRIDE_NONE },
+	/* 11" Macbook Air 3,1 passes the wrong stride */
+	[M_MBA_3] = { "mba3", 0, 2048 * 4, 0, 0, OVERRIDE_STRIDE },
+	[M_MBP] = { "mbp", 0x80010000, 1472 * 4, 1440, 900, OVERRIDE_NONE },
+	[M_MBP_2] = { "mbp2", 0, 0, 0, 0, OVERRIDE_NONE }, /* placeholder */
+	[M_MBP_2_2] = { "mbp22", 0x80010000, 1472 * 4, 1440, 900, OVERRIDE_NONE },
+	[M_MBP_SR] = { "mbp3", 0x80030000, 2048 * 4, 1440, 900, OVERRIDE_NONE },
+	[M_MBP_4] = { "mbp4", 0xc0060000, 2048 * 4, 1920, 1200, OVERRIDE_NONE },
+	[M_MBP_5_1] = { "mbp51", 0xc0010000, 2048 * 4, 1440, 900, OVERRIDE_NONE },
+	[M_MBP_5_2] = { "mbp52", 0xc0010000, 2048 * 4, 1920, 1200, OVERRIDE_NONE },
+	[M_MBP_5_3] = { "mbp53", 0xd0010000, 2048 * 4, 1440, 900, OVERRIDE_NONE },
+	[M_MBP_6_1] = { "mbp61", 0x90030000, 2048 * 4, 1920, 1200, OVERRIDE_NONE },
+	[M_MBP_6_2] = { "mbp62", 0x90030000, 2048 * 4, 1680, 1050, OVERRIDE_NONE },
+	[M_MBP_7_1] = { "mbp71", 0xc0010000, 2048 * 4, 1280, 800, OVERRIDE_NONE },
+	[M_MBP_8_2] = { "mbp82", 0x90010000, 1472 * 4, 1440, 900, OVERRIDE_NONE },
+	[M_UNKNOWN] = { NULL, 0, 0, 0, 0, OVERRIDE_NONE }
+};
+
+void efifb_setup_from_dmi(struct screen_info *si, const char *opt)
+{
+	int i;
+
+	for (i = 0; i < M_UNKNOWN; i++) {
+		if (efifb_dmi_list[i].base != 0 &&
+		    !strcmp(opt, efifb_dmi_list[i].optname)) {
+			si->lfb_base = efifb_dmi_list[i].base;
+			si->lfb_linelength = efifb_dmi_list[i].stride;
+			si->lfb_width = efifb_dmi_list[i].width;
+			si->lfb_height = efifb_dmi_list[i].height;
+		}
+	}
+}
+
+#define choose_value(dmivalue, fwvalue, field, flags) ({	\
+		typeof(fwvalue) _ret_ = fwvalue;		\
+		if ((flags) & (field))				\
+			_ret_ = dmivalue;			\
+		else if ((fwvalue) == 0)			\
+			_ret_ = dmivalue;			\
+		_ret_;						\
+	})
+
+static int __init efifb_set_system(const struct dmi_system_id *id)
+{
+	struct efifb_dmi_info *info = id->driver_data;
+
+	if (info->base == 0 && info->height == 0 && info->width == 0 &&
+	    info->stride == 0)
+		return 0;
+
+	/* Trust the bootloader over the DMI tables */
+	if (screen_info.lfb_base == 0) {
+#if defined(CONFIG_PCI)
+		struct pci_dev *dev = NULL;
+		int found_bar = 0;
+#endif
+		if (info->base) {
+			screen_info.lfb_base = choose_value(info->base,
+				screen_info.lfb_base, OVERRIDE_BASE,
+				info->flags);
+
+#if defined(CONFIG_PCI)
+			/* make sure that the address in the table is actually
+			 * on a VGA device's PCI BAR */
+
+			for_each_pci_dev(dev) {
+				int i;
+				if ((dev->class >> 8) != PCI_CLASS_DISPLAY_VGA)
+					continue;
+				for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+					resource_size_t start, end;
+					unsigned long flags;
+
+					flags = pci_resource_flags(dev, i);
+					if (!(flags & IORESOURCE_MEM))
+						continue;
+
+					if (flags & IORESOURCE_UNSET)
+						continue;
+
+					if (pci_resource_len(dev, i) == 0)
+						continue;
+
+					start = pci_resource_start(dev, i);
+					end = pci_resource_end(dev, i);
+					if (screen_info.lfb_base >= start &&
+					    screen_info.lfb_base < end) {
+						found_bar = 1;
+						break;
+					}
+				}
+			}
+			if (!found_bar)
+				screen_info.lfb_base = 0;
+#endif
+		}
+	}
+	if (screen_info.lfb_base) {
+		screen_info.lfb_linelength = choose_value(info->stride,
+			screen_info.lfb_linelength, OVERRIDE_STRIDE,
+			info->flags);
+		screen_info.lfb_width = choose_value(info->width,
+			screen_info.lfb_width, OVERRIDE_WIDTH,
+			info->flags);
+		screen_info.lfb_height = choose_value(info->height,
+			screen_info.lfb_height, OVERRIDE_HEIGHT,
+			info->flags);
+		if (screen_info.orig_video_isVGA == 0)
+			screen_info.orig_video_isVGA = VIDEO_TYPE_EFI;
+	} else {
+		screen_info.lfb_linelength = 0;
+		screen_info.lfb_width = 0;
+		screen_info.lfb_height = 0;
+		screen_info.orig_video_isVGA = 0;
+		return 0;
+	}
+
+	printk(KERN_INFO "efifb: dmi detected %s - framebuffer at 0x%08x "
+			 "(%dx%d, stride %d)\n", id->ident,
+			 screen_info.lfb_base, screen_info.lfb_width,
+			 screen_info.lfb_height, screen_info.lfb_linelength);
+
+	return 1;
+}
+
+#define EFIFB_DMI_SYSTEM_ID(vendor, name, enumid)		\
+	{							\
+		efifb_set_system,				\
+		name,						\
+		{						\
+			DMI_MATCH(DMI_BIOS_VENDOR, vendor),	\
+			DMI_MATCH(DMI_PRODUCT_NAME, name)	\
+		},						\
+		&efifb_dmi_list[enumid]				\
+	}
+
+static const struct dmi_system_id efifb_dmi_system_table[] __initconst = {
+	EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "iMac4,1", M_I17),
+	/* At least one of these two will be right; maybe both? */
+	EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "iMac5,1", M_I20),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "iMac5,1", M_I20),
+	/* At least one of these two will be right; maybe both? */
+	EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "iMac6,1", M_I24),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "iMac6,1", M_I24),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "iMac7,1", M_I20_SR),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "iMac8,1", M_I24_8_1),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "iMac10,1", M_I24_10_1),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "iMac11,1", M_I27_11_1),
+	EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "Macmini1,1", M_MINI),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "Macmini3,1", M_MINI_3_1),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "Macmini4,1", M_MINI_4_1),
+	EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "MacBook1,1", M_MB),
+	/* At least one of these two will be right; maybe both? */
+	EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "MacBook2,1", M_MB),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBook2,1", M_MB),
+	/* At least one of these two will be right; maybe both? */
+	EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "MacBook3,1", M_MB),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBook3,1", M_MB),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBook4,1", M_MB),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBook5,1", M_MB_5_1),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBook6,1", M_MB_6_1),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBook7,1", M_MB_7_1),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookAir1,1", M_MBA),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookAir3,1", M_MBA_3),
+	EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "MacBookPro1,1", M_MBP),
+	EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "MacBookPro2,1", M_MBP_2),
+	EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "MacBookPro2,2", M_MBP_2_2),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro2,1", M_MBP_2),
+	EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "MacBookPro3,1", M_MBP_SR),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro3,1", M_MBP_SR),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro4,1", M_MBP_4),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro5,1", M_MBP_5_1),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro5,2", M_MBP_5_2),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro5,3", M_MBP_5_3),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro6,1", M_MBP_6_1),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro6,2", M_MBP_6_2),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro7,1", M_MBP_7_1),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro8,2", M_MBP_8_2),
+	{},
+};
+
+/*
+ * Some devices have a portrait LCD but advertise a landscape resolution (and
+ * pitch). We simply swap width and height for these devices so that we can
+ * correctly deal with some of them coming with multiple resolutions.
+ */
+static const struct dmi_system_id efifb_dmi_swap_width_height[] __initconst = {
+	{
+		/*
+		 * Lenovo MIIX310-10ICR, only some batches have the troublesome
+		 * 800x1280 portrait screen. Luckily the portrait version has
+		 * its own BIOS version, so we match on that.
+		 */
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "MIIX 310-10ICR"),
+			DMI_EXACT_MATCH(DMI_BIOS_VERSION, "1HCN44WW"),
+		},
+	},
+	{
+		/* Lenovo MIIX 320-10ICR with 800x1280 portrait screen */
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_VERSION,
+					"Lenovo MIIX 320-10ICR"),
+		},
+	},
+	{
+		/* Lenovo D330 with 800x1280 or 1200x1920 portrait screen */
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_VERSION,
+					"Lenovo ideapad D330-10IGM"),
+		},
+	},
+	{},
+};
+
+static bool efifb_overlaps_pci_range(const struct of_pci_range *range)
+{
+	u64 fb_base = screen_info.lfb_base;
+
+	if (screen_info.capabilities & VIDEO_CAPABILITY_64BIT_BASE)
+		fb_base |= (u64)(unsigned long)screen_info.ext_lfb_base << 32;
+
+	return fb_base >= range->cpu_addr &&
+	       fb_base < (range->cpu_addr + range->size);
+}
+
+static struct device_node *find_pci_overlap_node(void)
+{
+	struct device_node *np;
+
+	for_each_node_by_type(np, "pci") {
+		struct of_pci_range_parser parser;
+		struct of_pci_range range;
+		int err;
+
+		err = of_pci_range_parser_init(&parser, np);
+		if (err) {
+			pr_warn("of_pci_range_parser_init() failed: %d\n", err);
+			continue;
+		}
+
+		for_each_of_pci_range(&parser, &range)
+			if (efifb_overlaps_pci_range(&range))
+				return np;
+	}
+	return NULL;
+}
+
+/*
+ * If the efifb framebuffer is backed by a PCI graphics controller, we have
+ * to ensure that this relation is expressed using a device link when
+ * running in DT mode, or the probe order may be reversed, resulting in a
+ * resource reservation conflict on the memory window that the efifb
+ * framebuffer steals from the PCIe host bridge.
+ */
+static int efifb_add_links(struct fwnode_handle *fwnode)
+{
+	struct device_node *sup_np;
+
+	sup_np = find_pci_overlap_node();
+
+	/*
+	 * If there's no PCI graphics controller backing the efifb, we are
+	 * done here.
+	 */
+	if (!sup_np)
+		return 0;
+
+	fwnode_link_add(fwnode, of_fwnode_handle(sup_np));
+	of_node_put(sup_np);
+
+	return 0;
+}
+
+static const struct fwnode_operations efifb_fwnode_ops = {
+	.add_links = efifb_add_links,
+};
+
+#ifdef CONFIG_EFI
+static struct fwnode_handle efifb_fwnode;
+
+__init void sysfb_apply_efi_quirks(struct platform_device *pd)
+{
+	if (screen_info.orig_video_isVGA != VIDEO_TYPE_EFI ||
+	    !(screen_info.capabilities & VIDEO_CAPABILITY_SKIP_QUIRKS))
+		dmi_check_system(efifb_dmi_system_table);
+
+	if (screen_info.orig_video_isVGA == VIDEO_TYPE_EFI &&
+	    dmi_check_system(efifb_dmi_swap_width_height)) {
+		u16 temp = screen_info.lfb_width;
+
+		screen_info.lfb_width = screen_info.lfb_height;
+		screen_info.lfb_height = temp;
+		screen_info.lfb_linelength = 4 * screen_info.lfb_width;
+	}
+
+	if (screen_info.orig_video_isVGA == VIDEO_TYPE_EFI && IS_ENABLED(CONFIG_PCI)) {
+		fwnode_init(&efifb_fwnode, &efifb_fwnode_ops);
+		pd->dev.fwnode = &efifb_fwnode;
+	}
+}
+#endif
diff --git a/drivers/firmware/sysfb.c b/drivers/firmware/sysfb.c
new file mode 100644
index 000000000000..2bfbb05f7d89
--- /dev/null
+++ b/drivers/firmware/sysfb.c
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Generic System Framebuffers
+ * Copyright (c) 2012-2013 David Herrmann <dh.herrmann@gmail.com>
+ */
+
+/*
+ * Simple-Framebuffer support
+ * Create a platform-device for any available boot framebuffer. The
+ * simple-framebuffer platform device is already available on DT systems, so
+ * this module parses the global "screen_info" object and creates a suitable
+ * platform device compatible with the "simple-framebuffer" DT object. If
+ * the framebuffer is incompatible, we instead create a legacy
+ * "vesa-framebuffer", "efi-framebuffer" or "platform-framebuffer" device and
+ * pass the screen_info as platform_data. This allows legacy drivers
+ * to pick these devices up without messing with simple-framebuffer drivers.
+ * The global "screen_info" is still valid at all times.
+ *
+ * If CONFIG_SYSFB_SIMPLEFB is not selected, never register "simple-framebuffer"
+ * platform devices, but only use legacy framebuffer devices for
+ * backwards compatibility.
+ *
+ * TODO: We set the dev_id field of all platform-devices to 0. This allows
+ * other OF/DT parsers to create such devices, too. However, they must
+ * start at offset 1 for this to work.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/platform_data/simplefb.h>
+#include <linux/platform_device.h>
+#include <linux/screen_info.h>
+#include <linux/sysfb.h>
+
+static __init int sysfb_init(void)
+{
+	struct screen_info *si = &screen_info;
+	struct simplefb_platform_data mode;
+	struct platform_device *pd;
+	const char *name;
+	bool compatible;
+	int ret;
+
+	/* try to create a simple-framebuffer device */
+	compatible = sysfb_parse_mode(si, &mode);
+	if (compatible) {
+		ret = sysfb_create_simplefb(si, &mode);
+		if (!ret)
+			return 0;
+	}
+
+	/* if the FB is incompatible, create a legacy framebuffer device */
+	if (si->orig_video_isVGA == VIDEO_TYPE_EFI)
+		name = "efi-framebuffer";
+	else if (si->orig_video_isVGA == VIDEO_TYPE_VLFB)
+		name = "vesa-framebuffer";
+	else
+		name = "platform-framebuffer";
+
+	pd = platform_device_alloc(name, 0);
+	if (!pd)
+		return -ENOMEM;
+
+	sysfb_apply_efi_quirks(pd);
+
+	ret = platform_device_add_data(pd, si, sizeof(*si));
+	if (ret)
+		goto err;
+
+	ret = platform_device_add(pd);
+	if (ret)
+		goto err;
+
+	return 0;
+err:
+	platform_device_put(pd);
+	return ret;
+}
+
+/* must execute after PCI subsystem for EFI quirks */
+device_initcall(sysfb_init);
diff --git a/drivers/firmware/sysfb_simplefb.c b/drivers/firmware/sysfb_simplefb.c
new file mode 100644
index 000000000000..b86761904949
--- /dev/null
+++ b/drivers/firmware/sysfb_simplefb.c
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Generic System Framebuffers
+ * Copyright (c) 2012-2013 David Herrmann <dh.herrmann@gmail.com>
+ */
+
+/*
+ * simple-framebuffer probing
+ * Try to convert "screen_info" into a "simple-framebuffer" compatible mode.
+ * If the mode is incompatible, we return "false" and let the caller create
+ * legacy nodes instead.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/platform_data/simplefb.h>
+#include <linux/platform_device.h>
+#include <linux/screen_info.h>
+#include <linux/sysfb.h>
+
+static const char simplefb_resname[] = "BOOTFB";
+static const struct simplefb_format formats[] = SIMPLEFB_FORMATS;
+
+/* try parsing screen_info into a simple-framebuffer mode struct */
+__init bool sysfb_parse_mode(const struct screen_info *si,
+			     struct simplefb_platform_data *mode)
+{
+	const struct simplefb_format *f;
+	__u8 type;
+	unsigned int i;
+
+	type = si->orig_video_isVGA;
+	if (type != VIDEO_TYPE_VLFB && type != VIDEO_TYPE_EFI)
+		return false;
+
+	for (i = 0; i < ARRAY_SIZE(formats); ++i) {
+		f = &formats[i];
+		if (si->lfb_depth == f->bits_per_pixel &&
+		    si->red_size == f->red.length &&
+		    si->red_pos == f->red.offset &&
+		    si->green_size == f->green.length &&
+		    si->green_pos == f->green.offset &&
+		    si->blue_size == f->blue.length &&
+		    si->blue_pos == f->blue.offset &&
+		    si->rsvd_size == f->transp.length &&
+		    si->rsvd_pos == f->transp.offset) {
+			mode->format = f->name;
+			mode->width = si->lfb_width;
+			mode->height = si->lfb_height;
+			mode->stride = si->lfb_linelength;
+			return true;
+		}
+	}
+
+	return false;
+}
+
+__init int sysfb_create_simplefb(const struct screen_info *si,
+				 const struct simplefb_platform_data *mode)
+{
+	struct platform_device *pd;
+	struct resource res;
+	u64 base, size;
+	u32 length;
+	int ret;
+
+	/*
+	 * If the 64BIT_BASE capability is set, ext_lfb_base will contain the
+	 * upper half of the base address. Assemble the address, then make sure
+	 * it is valid and we can actually access it.
+	 */
+	base = si->lfb_base;
+	if (si->capabilities & VIDEO_CAPABILITY_64BIT_BASE)
+		base |= (u64)si->ext_lfb_base << 32;
+	if (!base || (u64)(resource_size_t)base != base) {
+		printk(KERN_DEBUG "sysfb: inaccessible VRAM base\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Don't use lfb_size as IORESOURCE size, since it may contain the
+	 * entire VMEM, and thus require huge mappings. Use just the part we
+	 * need, that is, the part where the framebuffer is located. But verify
+	 * that it does not exceed the advertised VMEM.
+	 * Note that in case of VBE, the lfb_size is shifted by 16 bits for
+	 * historical reasons.
+	 */
+	size = si->lfb_size;
+	if (si->orig_video_isVGA == VIDEO_TYPE_VLFB)
+		size <<= 16;
+	length = mode->height * mode->stride;
+	if (length > size) {
+		printk(KERN_WARNING "sysfb: VRAM smaller than advertised\n");
+		return -EINVAL;
+	}
+	length = PAGE_ALIGN(length);
+
+	/* setup IORESOURCE_MEM as framebuffer memory */
+	memset(&res, 0, sizeof(res));
+	res.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+	res.name = simplefb_resname;
+	res.start = base;
+	res.end = res.start + length - 1;
+	if (res.end <= res.start)
+		return -EINVAL;
+
+	pd = platform_device_alloc("simple-framebuffer", 0);
+	if (!pd)
+		return -ENOMEM;
+
+	sysfb_apply_efi_quirks(pd);
+
+	ret = platform_device_add_resources(pd, &res, 1);
+	if (ret)
+		return ret;
+
+	ret = platform_device_add_data(pd, mode, sizeof(*mode));
+	if (ret)
+		return ret;
+
+	return platform_device_add(pd);
+}