[POWERPC] Create common fsl pci/e files based on 86xx platforms

Move
arch/powerpc/platforms/86xx/pci.c -> arch/powerpc/sysdev/fsl_pci.c
arch/powerpc/sysdev/fsl_pcie.h -> arch/powerpc/sysdev/fsl_pci.h
as the base to unify 83xx/85xx/86xx pci and pcie.

Add CONFIG_FSL_PCI to build fsl_pci.c for Freescale pci and pcie option.
The code still works for 86xx platforms.

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

3 files changed, 239 insertions, 0 deletions

diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 484eb4e0e9db..08ce31e612c2 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_PPC_PMI)		+= pmi.o
 obj-$(CONFIG_U3_DART)		+= dart_iommu.o
 obj-$(CONFIG_MMIO_NVRAM)	+= mmio_nvram.o
 obj-$(CONFIG_FSL_SOC)		+= fsl_soc.o
+obj-$(CONFIG_FSL_PCI)		+= fsl_pci.o
 obj-$(CONFIG_TSI108_BRIDGE)	+= tsi108_pci.o tsi108_dev.o
 obj-$(CONFIG_QUICC_ENGINE)	+= qe_lib/
 mv64x60-$(CONFIG_PCI)		+= mv64x60_pci.o
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
new file mode 100644
index 000000000000..24ba1b6b31fb
--- /dev/null
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -0,0 +1,238 @@
+/*
+ * MPC86XX pci setup code
+ *
+ * Recode: ZHANG WEI <wei.zhang@freescale.com>
+ * Initial author: Xianghua Xiao <x.xiao@freescale.com>
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/serial.h>
+
+#include <asm/system.h>
+#include <asm/atomic.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+
+#include "../platforms/86xx/mpc86xx.h"
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args)
+#else
+#define DBG(fmt, args...)
+#endif
+
+struct pcie_outbound_window_regs {
+	uint    pexotar;               /* 0x.0 - PCI Express outbound translation address register */
+	uint    pexotear;              /* 0x.4 - PCI Express outbound translation extended address register */
+	uint    pexowbar;              /* 0x.8 - PCI Express outbound window base address register */
+	char    res1[4];
+	uint    pexowar;               /* 0x.10 - PCI Express outbound window attributes register */
+	char    res2[12];
+};
+
+struct pcie_inbound_window_regs {
+	uint    pexitar;               /* 0x.0 - PCI Express inbound translation address register */
+	char    res1[4];
+	uint    pexiwbar;              /* 0x.8 - PCI Express inbound window base address register */
+	uint    pexiwbear;             /* 0x.c - PCI Express inbound window base extended address register */
+	uint    pexiwar;               /* 0x.10 - PCI Express inbound window attributes register */
+	char    res2[12];
+};
+
+static void __init setup_pcie_atmu(struct pci_controller *hose, struct resource *rsrc)
+{
+	volatile struct ccsr_pex *pcie;
+	volatile struct pcie_outbound_window_regs *pcieow;
+	volatile struct pcie_inbound_window_regs *pcieiw;
+	int i = 0;
+
+	DBG("PCIE memory map start 0x%x, size 0x%x\n", rsrc->start,
+			rsrc->end - rsrc->start + 1);
+	pcie = ioremap(rsrc->start, rsrc->end - rsrc->start + 1);
+
+	/* Disable all windows (except pexowar0 since its ignored) */
+	pcie->pexowar1 = 0;
+	pcie->pexowar2 = 0;
+ 	pcie->pexowar3 = 0;
+ 	pcie->pexowar4 = 0;
+ 	pcie->pexiwar1 = 0;
+ 	pcie->pexiwar2 = 0;
+ 	pcie->pexiwar3 = 0;
+
+ 	pcieow = (struct pcie_outbound_window_regs *)&pcie->pexotar1;
+ 	pcieiw = (struct pcie_inbound_window_regs *)&pcie->pexitar1;
+
+ 	/* Setup outbound MEM window */
+ 	for(i = 0; i < 3; i++)
+ 		if (hose->mem_resources[i].flags & IORESOURCE_MEM){
+ 			DBG("PCIE MEM resource start 0x%08x, size 0x%08x.\n",
+ 				hose->mem_resources[i].start,
+ 				hose->mem_resources[i].end
+ 				  - hose->mem_resources[i].start + 1);
+ 			pcieow->pexotar = (hose->mem_resources[i].start) >> 12
+ 				& 0x000fffff;
+ 			pcieow->pexotear = 0;
+ 			pcieow->pexowbar = (hose->mem_resources[i].start) >> 12
+ 				& 0x000fffff;
+ 			/* Enable, Mem R/W */
+ 			pcieow->pexowar = 0x80044000 |
+ 				(__ilog2(hose->mem_resources[i].end
+ 					 - hose->mem_resources[i].start + 1)
+ 				 - 1);
+ 			pcieow++;
+ 		}
+
+ 	/* Setup outbound IO window */
+ 	if (hose->io_resource.flags & IORESOURCE_IO){
+ 		DBG("PCIE IO resource start 0x%08x, size 0x%08x, phy base 0x%08x.\n",
+ 			hose->io_resource.start,
+ 			hose->io_resource.end - hose->io_resource.start + 1,
+ 			hose->io_base_phys);
+ 		pcieow->pexotar = (hose->io_resource.start) >> 12 & 0x000fffff;
+ 		pcieow->pexotear = 0;
+ 		pcieow->pexowbar = (hose->io_base_phys) >> 12 & 0x000fffff;
+ 		/* Enable, IO R/W */
+ 		pcieow->pexowar = 0x80088000 | (__ilog2(hose->io_resource.end
+ 					- hose->io_resource.start + 1) - 1);
+ 	}
+
+ 	/* Setup 2G inbound Memory Window @ 0 */
+ 	pcieiw->pexitar = 0x00000000;
+ 	pcieiw->pexiwbar = 0x00000000;
+ 	/* Enable, Prefetch, Local Mem, Snoop R/W, 2G */
+ 	pcieiw->pexiwar = 0xa0f5501e;
+}
+
+static void __init
+mpc86xx_setup_pcie(struct pci_controller *hose, u32 pcie_offset, u32 pcie_size)
+{
+	u16 cmd;
+
+	DBG("PCIE host controller register offset 0x%08x, size 0x%08x.\n",
+			pcie_offset, pcie_size);
+
+	early_read_config_word(hose, 0, 0, PCI_COMMAND, &cmd);
+	cmd |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY
+	    | PCI_COMMAND_IO;
+	early_write_config_word(hose, 0, 0, PCI_COMMAND, cmd);
+
+	early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0x80);
+}
+
+static void __devinit quirk_fsl_pcie_transparent(struct pci_dev *dev)
+{
+	struct resource *res;
+	int i, res_idx = PCI_BRIDGE_RESOURCES;
+	struct pci_controller *hose;
+
+	/*
+	 * Make the bridge be transparent.
+	 */
+	dev->transparent = 1;
+
+	hose = pci_bus_to_host(dev->bus);
+	if (!hose) {
+		printk(KERN_ERR "Can't find hose for bus %d\n",
+		       dev->bus->number);
+		return;
+	}
+
+	if (hose->io_resource.flags) {
+		res = &dev->resource[res_idx++];
+		res->start = hose->io_resource.start;
+		res->end = hose->io_resource.end;
+		res->flags = hose->io_resource.flags;
+	}
+
+	for (i = 0; i < 3; i++) {
+		res = &dev->resource[res_idx + i];
+		res->start = hose->mem_resources[i].start;
+		res->end = hose->mem_resources[i].end;
+		res->flags = hose->mem_resources[i].flags;
+	}
+}
+
+
+DECLARE_PCI_FIXUP_EARLY(0x1957, 0x7010, quirk_fsl_pcie_transparent);
+DECLARE_PCI_FIXUP_EARLY(0x1957, 0x7011, quirk_fsl_pcie_transparent);
+
+#define PCIE_LTSSM	0x404	/* PCIe Link Training and Status */
+#define PCIE_LTSSM_L0	0x16	/* L0 state */
+
+int __init mpc86xx_add_bridge(struct device_node *dev)
+{
+	int len;
+	struct pci_controller *hose;
+	struct resource rsrc;
+	const int *bus_range;
+	int has_address = 0;
+	int primary = 0;
+	u16 val;
+
+	DBG("Adding PCIE host bridge %s\n", dev->full_name);
+
+	/* Fetch host bridge registers address */
+	has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
+
+	/* Get bus range if any */
+	bus_range = of_get_property(dev, "bus-range", &len);
+	if (bus_range == NULL || len < 2 * sizeof(int))
+		printk(KERN_WARNING "Can't get bus-range for %s, assume"
+		       " bus 0\n", dev->full_name);
+
+	pci_assign_all_buses = 1;
+	hose = pcibios_alloc_controller(dev);
+	if (!hose)
+		return -ENOMEM;
+
+	hose->indirect_type = PPC_INDIRECT_TYPE_EXT_REG |
+				PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS;
+
+	hose->first_busno = bus_range ? bus_range[0] : 0x0;
+	hose->last_busno = bus_range ? bus_range[1] : 0xff;
+
+	setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4);
+
+	/* Probe the hose link training status */
+	early_read_config_word(hose, 0, 0, PCIE_LTSSM, &val);
+	if (val < PCIE_LTSSM_L0)
+		return -ENXIO;
+
+	/* Setup the PCIE host controller. */
+	mpc86xx_setup_pcie(hose, rsrc.start, rsrc.end - rsrc.start + 1);
+
+	if ((rsrc.start & 0xfffff) == 0x8000)
+		primary = 1;
+
+	printk(KERN_INFO "Found MPC86xx PCIE host bridge at 0x%08lx. "
+	       "Firmware bus number: %d->%d\n",
+	       (unsigned long) rsrc.start,
+	       hose->first_busno, hose->last_busno);
+
+	DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
+		hose, hose->cfg_addr, hose->cfg_data);
+
+	/* Interpret the "ranges" property */
+	/* This also maps the I/O region and sets isa_io/mem_base */
+	pci_process_bridge_OF_ranges(hose, dev, primary);
+
+	/* Setup PEX window registers */
+	setup_pcie_atmu(hose, &rsrc);
+
+	return 0;
+}
diff --git a/arch/powerpc/sysdev/fsl_pcie.h b/arch/powerpc/sysdev/fsl_pci.h
index 8d9779c84bea..8d9779c84bea 100644
--- a/arch/powerpc/sysdev/fsl_pcie.h
+++ b/arch/powerpc/sysdev/fsl_pci.h