powerpc: Fix usage of register macros getting ready for %r0 change

Anything that uses a constructed instruction (ie. from ppc-opcode.h),
need to use the new R0 macro, as %r0 is not going to work.

Also convert usages of macros where we are just determining an offset
(usually for a load/store), like:
	std	r14,STK_REG(r14)(r1)
Can't use STK_REG(r14) as %r14 doesn't work in the STK_REG macro since
it's just calculating an offset.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

3 files changed, 82 insertions, 82 deletions

diff --git a/arch/powerpc/mm/hash_low_64.S b/arch/powerpc/mm/hash_low_64.S
index a242b5d7cbe4..113dcb0f61df 100644
--- a/arch/powerpc/mm/hash_low_64.S
+++ b/arch/powerpc/mm/hash_low_64.S
@@ -64,9 +64,9 @@ _GLOBAL(__hash_page_4K)
 	std	r0,16(r1)
 	stdu	r1,-STACKFRAMESIZE(r1)
 	/* Save all params that we need after a function call */
-	std	r6,STK_PARM(r6)(r1)
-	std	r8,STK_PARM(r8)(r1)
-	std	r9,STK_PARM(r9)(r1)
+	std	r6,STK_PARM(R6)(r1)
+	std	r8,STK_PARM(R8)(r1)
+	std	r9,STK_PARM(R9)(r1)
 	
 	/* Save non-volatile registers.
 	 * r31 will hold "old PTE"
@@ -75,11 +75,11 @@ _GLOBAL(__hash_page_4K)
 	 * r28 is a hash value
 	 * r27 is hashtab mask (maybe dynamic patched instead ?)
 	 */
-	std	r27,STK_REG(r27)(r1)
-	std	r28,STK_REG(r28)(r1)
-	std	r29,STK_REG(r29)(r1)
-	std	r30,STK_REG(r30)(r1)
-	std	r31,STK_REG(r31)(r1)
+	std	r27,STK_REG(R27)(r1)
+	std	r28,STK_REG(R28)(r1)
+	std	r29,STK_REG(R29)(r1)
+	std	r30,STK_REG(R30)(r1)
+	std	r31,STK_REG(R31)(r1)
 	
 	/* Step 1:
 	 *
@@ -162,7 +162,7 @@ END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE)
 	/* At this point, r3 contains new PP bits, save them in
 	 * place of "access" in the param area (sic)
 	 */
-	std	r3,STK_PARM(r4)(r1)
+	std	r3,STK_PARM(R4)(r1)
 
 	/* Get htab_hash_mask */
 	ld	r4,htab_hash_mask@got(2)
@@ -192,11 +192,11 @@ htab_insert_pte:
 	rldicr	r3,r0,3,63-3		/* r3 = (hash & mask) << 3 */
 
 	/* Call ppc_md.hpte_insert */
-	ld	r6,STK_PARM(r4)(r1)	/* Retrieve new pp bits */
+	ld	r6,STK_PARM(R4)(r1)	/* Retrieve new pp bits */
 	mr	r4,r29			/* Retrieve va */
 	li	r7,0			/* !bolted, !secondary */
 	li	r8,MMU_PAGE_4K		/* page size */
-	ld	r9,STK_PARM(r9)(r1)	/* segment size */
+	ld	r9,STK_PARM(R9)(r1)	/* segment size */
 _GLOBAL(htab_call_hpte_insert1)
 	bl	.			/* Patched by htab_finish_init() */
 	cmpdi	0,r3,0
@@ -215,11 +215,11 @@ _GLOBAL(htab_call_hpte_insert1)
 	rldicr	r3,r0,3,63-3	/* r0 = (~hash & mask) << 3 */
 	
 	/* Call ppc_md.hpte_insert */
-	ld	r6,STK_PARM(r4)(r1)	/* Retrieve new pp bits */
+	ld	r6,STK_PARM(R4)(r1)	/* Retrieve new pp bits */
 	mr	r4,r29			/* Retrieve va */
 	li	r7,HPTE_V_SECONDARY	/* !bolted, secondary */
 	li	r8,MMU_PAGE_4K		/* page size */
-	ld	r9,STK_PARM(r9)(r1)	/* segment size */
+	ld	r9,STK_PARM(R9)(r1)	/* segment size */
 _GLOBAL(htab_call_hpte_insert2)
 	bl	.			/* Patched by htab_finish_init() */
 	cmpdi	0,r3,0
@@ -255,15 +255,15 @@ htab_pte_insert_ok:
 	 * (maybe add eieio may be good still ?)
 	 */
 htab_write_out_pte:
-	ld	r6,STK_PARM(r6)(r1)
+	ld	r6,STK_PARM(R6)(r1)
 	std	r30,0(r6)
 	li	r3, 0
 htab_bail:
-	ld	r27,STK_REG(r27)(r1)
-	ld	r28,STK_REG(r28)(r1)
-	ld	r29,STK_REG(r29)(r1)
-	ld      r30,STK_REG(r30)(r1)
-	ld      r31,STK_REG(r31)(r1)
+	ld	r27,STK_REG(R27)(r1)
+	ld	r28,STK_REG(R28)(r1)
+	ld	r29,STK_REG(R29)(r1)
+	ld      r30,STK_REG(R30)(r1)
+	ld      r31,STK_REG(R31)(r1)
 	addi    r1,r1,STACKFRAMESIZE
 	ld      r0,16(r1)
 	mtlr    r0
@@ -288,8 +288,8 @@ htab_modify_pte:
 	/* Call ppc_md.hpte_updatepp */
 	mr	r5,r29			/* va */
 	li	r6,MMU_PAGE_4K		/* page size */
-	ld	r7,STK_PARM(r9)(r1)	/* segment size */
-	ld	r8,STK_PARM(r8)(r1)	/* get "local" param */
+	ld	r7,STK_PARM(R9)(r1)	/* segment size */
+	ld	r8,STK_PARM(R8)(r1)	/* get "local" param */
 _GLOBAL(htab_call_hpte_updatepp)
 	bl	.			/* Patched by htab_finish_init() */
 
@@ -312,7 +312,7 @@ htab_wrong_access:
 
 htab_pte_insert_failure:
 	/* Bail out restoring old PTE */
-	ld	r6,STK_PARM(r6)(r1)
+	ld	r6,STK_PARM(R6)(r1)
 	std	r31,0(r6)
 	li	r3,-1
 	b	htab_bail
@@ -340,9 +340,9 @@ _GLOBAL(__hash_page_4K)
 	std	r0,16(r1)
 	stdu	r1,-STACKFRAMESIZE(r1)
 	/* Save all params that we need after a function call */
-	std	r6,STK_PARM(r6)(r1)
-	std	r8,STK_PARM(r8)(r1)
-	std	r9,STK_PARM(r9)(r1)
+	std	r6,STK_PARM(R6)(r1)
+	std	r8,STK_PARM(R8)(r1)
+	std	r9,STK_PARM(R9)(r1)
 
 	/* Save non-volatile registers.
 	 * r31 will hold "old PTE"
@@ -353,13 +353,13 @@ _GLOBAL(__hash_page_4K)
 	 * r26 is the hidx mask
 	 * r25 is the index in combo page
 	 */
-	std	r25,STK_REG(r25)(r1)
-	std	r26,STK_REG(r26)(r1)
-	std	r27,STK_REG(r27)(r1)
-	std	r28,STK_REG(r28)(r1)
-	std	r29,STK_REG(r29)(r1)
-	std	r30,STK_REG(r30)(r1)
-	std	r31,STK_REG(r31)(r1)
+	std	r25,STK_REG(R25)(r1)
+	std	r26,STK_REG(R26)(r1)
+	std	r27,STK_REG(R27)(r1)
+	std	r28,STK_REG(R28)(r1)
+	std	r29,STK_REG(R29)(r1)
+	std	r30,STK_REG(R30)(r1)
+	std	r31,STK_REG(R31)(r1)
 
 	/* Step 1:
 	 *
@@ -452,7 +452,7 @@ END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE)
 	/* At this point, r3 contains new PP bits, save them in
 	 * place of "access" in the param area (sic)
 	 */
-	std	r3,STK_PARM(r4)(r1)
+	std	r3,STK_PARM(R4)(r1)
 
 	/* Get htab_hash_mask */
 	ld	r4,htab_hash_mask@got(2)
@@ -473,7 +473,7 @@ END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE)
 	andis.	r0,r31,_PAGE_COMBO@h
 	beq	htab_inval_old_hpte
 
-	ld	r6,STK_PARM(r6)(r1)
+	ld	r6,STK_PARM(R6)(r1)
 	ori	r26,r6,0x8000		/* Load the hidx mask */
 	ld	r26,0(r26)
 	addi	r5,r25,36		/* Check actual HPTE_SUB bit, this */
@@ -495,11 +495,11 @@ htab_special_pfn:
 	rldicr	r3,r0,3,63-3		/* r0 = (hash & mask) << 3 */
 
 	/* Call ppc_md.hpte_insert */
-	ld	r6,STK_PARM(r4)(r1)	/* Retrieve new pp bits */
+	ld	r6,STK_PARM(R4)(r1)	/* Retrieve new pp bits */
 	mr	r4,r29			/* Retrieve va */
 	li	r7,0			/* !bolted, !secondary */
 	li	r8,MMU_PAGE_4K		/* page size */
-	ld	r9,STK_PARM(r9)(r1)	/* segment size */
+	ld	r9,STK_PARM(R9)(r1)	/* segment size */
 _GLOBAL(htab_call_hpte_insert1)
 	bl	.			/* patched by htab_finish_init() */
 	cmpdi	0,r3,0
@@ -522,11 +522,11 @@ _GLOBAL(htab_call_hpte_insert1)
 	rldicr	r3,r0,3,63-3		/* r0 = (~hash & mask) << 3 */
 
 	/* Call ppc_md.hpte_insert */
-	ld	r6,STK_PARM(r4)(r1)	/* Retrieve new pp bits */
+	ld	r6,STK_PARM(R4)(r1)	/* Retrieve new pp bits */
 	mr	r4,r29			/* Retrieve va */
 	li	r7,HPTE_V_SECONDARY	/* !bolted, secondary */
 	li	r8,MMU_PAGE_4K		/* page size */
-	ld	r9,STK_PARM(r9)(r1)	/* segment size */
+	ld	r9,STK_PARM(R9)(r1)	/* segment size */
 _GLOBAL(htab_call_hpte_insert2)
 	bl	.			/* patched by htab_finish_init() */
 	cmpdi	0,r3,0
@@ -559,8 +559,8 @@ htab_inval_old_hpte:
 	mr	r4,r31			/* PTE.pte */
 	li	r5,0			/* PTE.hidx */
 	li	r6,MMU_PAGE_64K		/* psize */
-	ld	r7,STK_PARM(r9)(r1)	/* ssize */
-	ld	r8,STK_PARM(r8)(r1)	/* local */
+	ld	r7,STK_PARM(R9)(r1)	/* ssize */
+	ld	r8,STK_PARM(R8)(r1)	/* local */
 	bl	.flush_hash_page
 	/* Clear out _PAGE_HPTE_SUB bits in the new linux PTE */
 	lis	r0,_PAGE_HPTE_SUB@h
@@ -576,7 +576,7 @@ htab_pte_insert_ok:
 	/* Insert slot number & secondary bit in PTE second half,
 	 * clear _PAGE_BUSY and set approriate HPTE slot bit
 	 */
-	ld	r6,STK_PARM(r6)(r1)
+	ld	r6,STK_PARM(R6)(r1)
 	li	r0,_PAGE_BUSY
 	andc	r30,r30,r0
 	/* HPTE SUB bit */
@@ -597,13 +597,13 @@ htab_pte_insert_ok:
 	std	r30,0(r6)
 	li	r3, 0
 htab_bail:
-	ld	r25,STK_REG(r25)(r1)
-	ld	r26,STK_REG(r26)(r1)
-	ld	r27,STK_REG(r27)(r1)
-	ld	r28,STK_REG(r28)(r1)
-	ld	r29,STK_REG(r29)(r1)
-	ld      r30,STK_REG(r30)(r1)
-	ld      r31,STK_REG(r31)(r1)
+	ld	r25,STK_REG(R25)(r1)
+	ld	r26,STK_REG(R26)(r1)
+	ld	r27,STK_REG(R27)(r1)
+	ld	r28,STK_REG(R28)(r1)
+	ld	r29,STK_REG(R29)(r1)
+	ld      r30,STK_REG(R30)(r1)
+	ld      r31,STK_REG(R31)(r1)
 	addi    r1,r1,STACKFRAMESIZE
 	ld      r0,16(r1)
 	mtlr    r0
@@ -630,8 +630,8 @@ htab_modify_pte:
 	/* Call ppc_md.hpte_updatepp */
 	mr	r5,r29			/* va */
 	li	r6,MMU_PAGE_4K		/* page size */
-	ld	r7,STK_PARM(r9)(r1)	/* segment size */
-	ld	r8,STK_PARM(r8)(r1)	/* get "local" param */
+	ld	r7,STK_PARM(R9)(r1)	/* segment size */
+	ld	r8,STK_PARM(R8)(r1)	/* get "local" param */
 _GLOBAL(htab_call_hpte_updatepp)
 	bl	.			/* patched by htab_finish_init() */
 
@@ -644,7 +644,7 @@ _GLOBAL(htab_call_hpte_updatepp)
 	/* Clear the BUSY bit and Write out the PTE */
 	li	r0,_PAGE_BUSY
 	andc	r30,r30,r0
-	ld	r6,STK_PARM(r6)(r1)
+	ld	r6,STK_PARM(R6)(r1)
 	std	r30,0(r6)
 	li	r3,0
 	b	htab_bail
@@ -657,7 +657,7 @@ htab_wrong_access:
 
 htab_pte_insert_failure:
 	/* Bail out restoring old PTE */
-	ld	r6,STK_PARM(r6)(r1)
+	ld	r6,STK_PARM(R6)(r1)
 	std	r31,0(r6)
 	li	r3,-1
 	b	htab_bail
@@ -677,9 +677,9 @@ _GLOBAL(__hash_page_64K)
 	std	r0,16(r1)
 	stdu	r1,-STACKFRAMESIZE(r1)
 	/* Save all params that we need after a function call */
-	std	r6,STK_PARM(r6)(r1)
-	std	r8,STK_PARM(r8)(r1)
-	std	r9,STK_PARM(r9)(r1)
+	std	r6,STK_PARM(R6)(r1)
+	std	r8,STK_PARM(R8)(r1)
+	std	r9,STK_PARM(R9)(r1)
 
 	/* Save non-volatile registers.
 	 * r31 will hold "old PTE"
@@ -688,11 +688,11 @@ _GLOBAL(__hash_page_64K)
 	 * r28 is a hash value
 	 * r27 is hashtab mask (maybe dynamic patched instead ?)
 	 */
-	std	r27,STK_REG(r27)(r1)
-	std	r28,STK_REG(r28)(r1)
-	std	r29,STK_REG(r29)(r1)
-	std	r30,STK_REG(r30)(r1)
-	std	r31,STK_REG(r31)(r1)
+	std	r27,STK_REG(R27)(r1)
+	std	r28,STK_REG(R28)(r1)
+	std	r29,STK_REG(R29)(r1)
+	std	r30,STK_REG(R30)(r1)
+	std	r31,STK_REG(R31)(r1)
 
 	/* Step 1:
 	 *
@@ -780,7 +780,7 @@ END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE)
 	/* At this point, r3 contains new PP bits, save them in
 	 * place of "access" in the param area (sic)
 	 */
-	std	r3,STK_PARM(r4)(r1)
+	std	r3,STK_PARM(R4)(r1)
 
 	/* Get htab_hash_mask */
 	ld	r4,htab_hash_mask@got(2)
@@ -813,11 +813,11 @@ ht64_insert_pte:
 	rldicr	r3,r0,3,63-3	/* r0 = (hash & mask) << 3 */
 
 	/* Call ppc_md.hpte_insert */
-	ld	r6,STK_PARM(r4)(r1)	/* Retrieve new pp bits */
+	ld	r6,STK_PARM(R4)(r1)	/* Retrieve new pp bits */
 	mr	r4,r29			/* Retrieve va */
 	li	r7,0			/* !bolted, !secondary */
 	li	r8,MMU_PAGE_64K
-	ld	r9,STK_PARM(r9)(r1)	/* segment size */
+	ld	r9,STK_PARM(R9)(r1)	/* segment size */
 _GLOBAL(ht64_call_hpte_insert1)
 	bl	.			/* patched by htab_finish_init() */
 	cmpdi	0,r3,0
@@ -836,11 +836,11 @@ _GLOBAL(ht64_call_hpte_insert1)
 	rldicr	r3,r0,3,63-3	/* r0 = (~hash & mask) << 3 */
 
 	/* Call ppc_md.hpte_insert */
-	ld	r6,STK_PARM(r4)(r1)	/* Retrieve new pp bits */
+	ld	r6,STK_PARM(R4)(r1)	/* Retrieve new pp bits */
 	mr	r4,r29			/* Retrieve va */
 	li	r7,HPTE_V_SECONDARY	/* !bolted, secondary */
 	li	r8,MMU_PAGE_64K
-	ld	r9,STK_PARM(r9)(r1)	/* segment size */
+	ld	r9,STK_PARM(R9)(r1)	/* segment size */
 _GLOBAL(ht64_call_hpte_insert2)
 	bl	.			/* patched by htab_finish_init() */
 	cmpdi	0,r3,0
@@ -876,15 +876,15 @@ ht64_pte_insert_ok:
 	 * (maybe add eieio may be good still ?)
 	 */
 ht64_write_out_pte:
-	ld	r6,STK_PARM(r6)(r1)
+	ld	r6,STK_PARM(R6)(r1)
 	std	r30,0(r6)
 	li	r3, 0
 ht64_bail:
-	ld	r27,STK_REG(r27)(r1)
-	ld	r28,STK_REG(r28)(r1)
-	ld	r29,STK_REG(r29)(r1)
-	ld      r30,STK_REG(r30)(r1)
-	ld      r31,STK_REG(r31)(r1)
+	ld	r27,STK_REG(R27)(r1)
+	ld	r28,STK_REG(R28)(r1)
+	ld	r29,STK_REG(R29)(r1)
+	ld      r30,STK_REG(R30)(r1)
+	ld      r31,STK_REG(R31)(r1)
 	addi    r1,r1,STACKFRAMESIZE
 	ld      r0,16(r1)
 	mtlr    r0
@@ -909,8 +909,8 @@ ht64_modify_pte:
 	/* Call ppc_md.hpte_updatepp */
 	mr	r5,r29			/* va */
 	li	r6,MMU_PAGE_64K
-	ld	r7,STK_PARM(r9)(r1)	/* segment size */
-	ld	r8,STK_PARM(r8)(r1)	/* get "local" param */
+	ld	r7,STK_PARM(R9)(r1)	/* segment size */
+	ld	r8,STK_PARM(R8)(r1)	/* get "local" param */
 _GLOBAL(ht64_call_hpte_updatepp)
 	bl	.			/* patched by htab_finish_init() */
 
@@ -933,7 +933,7 @@ ht64_wrong_access:
 
 ht64_pte_insert_failure:
 	/* Bail out restoring old PTE */
-	ld	r6,STK_PARM(r6)(r1)
+	ld	r6,STK_PARM(R6)(r1)
 	std	r31,0(r6)
 	li	r3,-1
 	b	ht64_bail
diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S
index ff672bd8fea9..4b9e2643d21b 100644
--- a/arch/powerpc/mm/tlb_low_64e.S
+++ b/arch/powerpc/mm/tlb_low_64e.S
@@ -126,7 +126,7 @@ BEGIN_MMU_FTR_SECTION
 	/* Set the TLB reservation and search for existing entry. Then load
 	 * the entry.
 	 */
-	PPC_TLBSRX_DOT(0,r16)
+	PPC_TLBSRX_DOT(R0,R16)
 	ldx	r14,r14,r15		/* grab pgd entry */
 	beq	normal_tlb_miss_done	/* tlb exists already, bail */
 MMU_FTR_SECTION_ELSE
@@ -395,7 +395,7 @@ BEGIN_MMU_FTR_SECTION
 	/* Set the TLB reservation and search for existing entry. Then load
 	 * the entry.
 	 */
-	PPC_TLBSRX_DOT(0,r16)
+	PPC_TLBSRX_DOT(R0,R16)
 	ld	r14,0(r10)
 	beq	normal_tlb_miss_done
 MMU_FTR_SECTION_ELSE
@@ -528,7 +528,7 @@ BEGIN_MMU_FTR_SECTION
 	/* Search if we already have a TLB entry for that virtual address, and
 	 * if we do, bail out.
 	 */
-	PPC_TLBSRX_DOT(0,r16)
+	PPC_TLBSRX_DOT(R0,R16)
 	beq	virt_page_table_tlb_miss_done
 END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_TLBRSRV)
 
@@ -779,7 +779,7 @@ htw_tlb_miss:
 	 *
 	 * MAS1:IND should be already set based on MAS4
 	 */
-	PPC_TLBSRX_DOT(0,r16)
+	PPC_TLBSRX_DOT(R0,R16)
 	beq	htw_tlb_miss_done
 
 	/* Now, we need to walk the page tables. First check if we are in
@@ -919,7 +919,7 @@ tlb_load_linear:
 	mtspr	SPRN_MAS1,r15
 
 	/* Already somebody there ? */
-	PPC_TLBSRX_DOT(0,r16)
+	PPC_TLBSRX_DOT(R0,R16)
 	beq	tlb_load_linear_done
 
 	/* Now we build the remaining MAS. MAS0 and 2 should be fine
diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S
index 7c63c0ed4f1b..5a1285a9109f 100644
--- a/arch/powerpc/mm/tlb_nohash_low.S
+++ b/arch/powerpc/mm/tlb_nohash_low.S
@@ -313,7 +313,7 @@ BEGIN_MMU_FTR_SECTION
 	mtspr	SPRN_MAS1,r4
 	tlbwe
 MMU_FTR_SECTION_ELSE
-	PPC_TLBILX_VA(0,r3)
+	PPC_TLBILX_VA(R0,R3)
 ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX)
 	msync
 	isync
@@ -364,7 +364,7 @@ _GLOBAL(_tlbil_va)
 	beq	1f
 	rlwimi	r4,r6,MAS6_SIND_SHIFT,MAS6_SIND
 1:	mtspr	SPRN_MAS6,r4		/* assume AS=0 for now */
-	PPC_TLBILX_VA(0,r3)
+	PPC_TLBILX_VA(R0,R3)
 	msync
 	isync
 	wrtee	r10
@@ -379,7 +379,7 @@ _GLOBAL(_tlbivax_bcast)
 	beq	1f
 	rlwimi	r4,r6,MAS6_SIND_SHIFT,MAS6_SIND
 1:	mtspr	SPRN_MAS6,r4		/* assume AS=0 for now */
-	PPC_TLBIVAX(0,r3)
+	PPC_TLBIVAX(R0,R3)
 	eieio
 	tlbsync
 	sync