powerpc: Rework lazy-interrupt handling

The current implementation of lazy interrupts handling has some
issues that this tries to address.

We don't do the various workarounds we need to do when re-enabling
interrupts in some cases such as when returning from an interrupt
and thus we may still lose or get delayed decrementer or doorbell
interrupts.

The current scheme also makes it much harder to handle the external
"edge" interrupts provided by some BookE processors when using the
EPR facility (External Proxy) and the Freescale Hypervisor.

Additionally, we tend to keep interrupts hard disabled in a number
of cases, such as decrementer interrupts, external interrupts, or
when a masked decrementer interrupt is pending. This is sub-optimal.

This is an attempt at fixing it all in one go by reworking the way
we do the lazy interrupt disabling from the ground up.

The base idea is to replace the "hard_enabled" field with a
"irq_happened" field in which we store a bit mask of what interrupt
occurred while soft-disabled.

When re-enabling, either via arch_local_irq_restore() or when returning
from an interrupt, we can now decide what to do by testing bits in that
field.

We then implement replaying of the missed interrupts either by
re-using the existing exception frame (in exception exit case) or via
the creation of a new one from an assembly trampoline (in the
arch_local_irq_enable case).

This removes the need to play with the decrementer to try to create
fake interrupts, among others.

In addition, this adds a few refinements:

 - We no longer  hard disable decrementer interrupts that occur
while soft-disabled. We now simply bump the decrementer back to max
(on BookS) or leave it stopped (on BookE) and continue with hard interrupts
enabled, which means that we'll potentially get better sample quality from
performance monitor interrupts.

 - Timer, decrementer and doorbell interrupts now hard-enable
shortly after removing the source of the interrupt, which means
they no longer run entirely hard disabled. Again, this will improve
perf sample quality.

 - On Book3E 64-bit, we now make the performance monitor interrupt
act as an NMI like Book3S (the necessary C code for that to work
appear to already be present in the FSL perf code, notably calling
nmi_enter instead of irq_enter). (This also fixes a bug where BookE
perfmon interrupts could clobber r14 ... oops)

 - We could make "masked" decrementer interrupts act as NMIs when doing
timer-based perf sampling to improve the sample quality.

Signed-off-by-yet: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---

v2:

- Add hard-enable to decrementer, timer and doorbells
- Fix CR clobber in masked irq handling on BookE
- Make embedded perf interrupt act as an NMI
- Add a PACA_HAPPENED_EE_EDGE for use by FSL if they want
  to retrigger an interrupt without preventing hard-enable

v3:

 - Fix or vs. ori bug on Book3E
 - Fix enabling of interrupts for some exceptions on Book3E

v4:

 - Fix resend of doorbells on return from interrupt on Book3E

v5:

 - Rebased on top of my latest series, which involves some significant
rework of some aspects of the patch.

v6:
 - 32-bit compile fix
 - more compile fixes with various .config combos
 - factor out the asm code to soft-disable interrupts
 - remove the C wrapper around preempt_schedule_irq

v7:
 - Fix a bug with hard irq state tracking on native power7

1 files changed, 6 insertions, 19 deletions

diff --git a/arch/powerpc/kernel/idle_book3e.S b/arch/powerpc/kernel/idle_book3e.S
index 16c002d6bdf1..ff007b59448d 100644
--- a/arch/powerpc/kernel/idle_book3e.S
+++ b/arch/powerpc/kernel/idle_book3e.S
@@ -29,43 +29,30 @@ _GLOBAL(book3e_idle)
 	wrteei	0
 
 	/* Now check if an interrupt came in while we were soft disabled
-	 * since we may otherwise lose it (doorbells etc...). We know
-	 * that since PACAHARDIRQEN will have been cleared in that case.
+	 * since we may otherwise lose it (doorbells etc...).
 	 */
-	lbz	r3,PACAHARDIRQEN(r13)
+	lbz	r3,PACAIRQHAPPENED(r13)
 	cmpwi	cr0,r3,0
-	beqlr
+	bnelr
 
-	/* Now we are going to mark ourselves as soft and hard enables in
+	/* Now we are going to mark ourselves as soft and hard enabled in
 	 * order to be able to take interrupts while asleep. We inform lockdep
 	 * of that. We don't actually turn interrupts on just yet tho.
 	 */
 #ifdef CONFIG_TRACE_IRQFLAGS
 	stdu    r1,-128(r1)
 	bl	.trace_hardirqs_on
+	addi    r1,r1,128
 #endif
 	li	r0,1
 	stb	r0,PACASOFTIRQEN(r13)
-	stb	r0,PACAHARDIRQEN(r13)
 	
 	/* Interrupts will make use return to LR, so get something we want
 	 * in there
 	 */
 	bl	1f
 
-	/* Hard disable interrupts again */
-	wrteei	0
-
-	/* Mark them off again in the PACA as well */
-	li	r0,0
-	stb	r0,PACASOFTIRQEN(r13)
-	stb	r0,PACAHARDIRQEN(r13)
-
-	/* Tell lockdep about it */
-#ifdef CONFIG_TRACE_IRQFLAGS
-	bl	.trace_hardirqs_off
-	addi    r1,r1,128
-#endif
+	/* And return (interrupts are on) */
 	ld	r0,16(r1)
 	mtlr	r0
 	blr