Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for MIPS for 4.8.  Also includes is a
  minor SSB cleanup as SSB code traditionally is merged through the MIPS
  tree:

  ATH25:
    - MIPS: Add default configuration for ath25

  Boot:
    - For zboot, copy appended dtb to the end of the kernel
    - store the appended dtb address in a variable

  BPF:
    - Fix off by one error in offset allocation

  Cobalt code:
    - Fix typos

  Core code:
    - debugfs_create_file returns NULL on error, so don't use IS_ERR for
      testing for errors.
    - Fix double locking issue in RM7000 S-cache code.  This would only
      affect RM7000 ARC systems on reboot.
    - Fix page table corruption on THP permission changes.
    - Use compat_sys_keyctl for 32 bit userspace on 64 bit kernels.
      David says, there are no compatibility issues raised by this fix.
    - Move some signal code around.
    - Rewrite r4k count/compare clockevent device registration such that
      min_delta_ticks/max_delta_ticks files are guaranteed to be
      initialized.
    - Only register r4k count/compare as clockevent device if we can
      assume the clock to be constant.
    - Fix MSA asm warnings in control reg accessors
    - uasm and tlbex fixes and tweaking.
    - Print segment physical address when EU=1.
    - Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO.
    - CP: Allow booting by VP other than VP 0
    - Cache handling fixes and optimizations for r4k class caches
    - Add hotplug support for R6 processors
    - Cleanup hotplug bits in kconfig
    - traps: return correct si code for accessing nonmapped addresses
    - Remove cpu_has_safe_index_cacheops

  Lantiq:
    - Register IRQ handler for virtual IRQ number
    - Fix EIU interrupt loading code
    - Use the real EXIN count
    - Fix build error.

  Loongson 3:
    - Increase HPET_MIN_PROG_DELTA and decrease HPET_MIN_CYCLES

  Octeon:
    - Delete built-in DTB pruning code for D-Link DSR-1000N.
    - Clean up GPIO definitions in dlink_dsr-1000n.dts.
    - Add more LEDs to the DSR-100n DTS
    - Fix off by one in octeon_irq_gpio_map()
    - Typo fixes
    - Enable SATA by default in cavium_octeon_defconfig
    - Support readq/writeq()
    - Remove forced mappings of USB interrupts.
    - Ensure DMA descriptors are always in the low 4GB
    - Improve USB reset code for OCTEON II.

  Pistachio:
    - Add maintainers entry for pistachio SoC Support
    - Remove plat_setup_iocoherency

  Ralink:
    - Fix pwm UART in spis group pinmux.

  SSB:
    - Change bare unsigned to unsigned int to suit coding style

  Tools:
    - Fix reloc tool compiler warnings.

  Other:
    - Delete use of ARCH_WANT_OPTIONAL_GPIOLIB"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (61 commits)
  MIPS: mm: Fix definition of R6 cache instruction
  MIPS: tools: Fix relocs tool compiler warnings
  MIPS: Cobalt: Fix typo
  MIPS: Octeon: Fix typo
  MIPS: Lantiq: Fix build failure
  MIPS: Use CPHYSADDR to implement mips32 __pa
  MIPS: Octeon: Dlink_dsr-1000n.dts: add more leds.
  MIPS: Octeon: Clean up GPIO definitions in dlink_dsr-1000n.dts.
  MIPS: Octeon: Delete built-in DTB pruning code for D-Link DSR-1000N.
  MIPS: store the appended dtb address in a variable
  MIPS: ZBOOT: copy appended dtb to the end of the kernel
  MIPS: ralink: fix spis group pinmux
  MIPS: Factor o32 specific code into signal_o32.c
  MIPS: non-exec stack & heap when non-exec PT_GNU_STACK is present
  MIPS: Use per-mm page to execute branch delay slot instructions
  MIPS: Modify error handling
  MIPS: c-r4k: Use SMP calls for CM indexed cache ops
  MIPS: c-r4k: Avoid small flush_icache_range SMP calls
  MIPS: c-r4k: Local flush_icache_range cache op override
  MIPS: c-r4k: Split r4k_flush_kernel_vmap_range()
  ...

1 files changed, 69 insertions, 56 deletions

diff --git a/arch/mips/cavium-octeon/octeon-platform.c b/arch/mips/cavium-octeon/octeon-platform.c
index 7aeafedff94e..b31fbc9d6eae 100644
--- a/arch/mips/cavium-octeon/octeon-platform.c
+++ b/arch/mips/cavium-octeon/octeon-platform.c
@@ -3,33 +3,27 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 2004-2011 Cavium Networks
+ * Copyright (C) 2004-2016 Cavium Networks
  * Copyright (C) 2008 Wind River Systems
  */
 
-#include <linux/delay.h>
 #include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/i2c.h>
-#include <linux/usb.h>
-#include <linux/dma-mapping.h>
+#include <linux/delay.h>
 #include <linux/etherdevice.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
 #include <linux/of_platform.h>
 #include <linux/of_fdt.h>
 #include <linux/libfdt.h>
+#include <linux/usb/ehci_def.h>
 #include <linux/usb/ehci_pdriver.h>
 #include <linux/usb/ohci_pdriver.h>
 
 #include <asm/octeon/octeon.h>
-#include <asm/octeon/cvmx-rnm-defs.h>
-#include <asm/octeon/cvmx-helper.h>
 #include <asm/octeon/cvmx-helper-board.h>
 #include <asm/octeon/cvmx-uctlx-defs.h>
 
+#define CVMX_UAHCX_EHCI_USBCMD	(CVMX_ADD_IO_SEG(0x00016F0000000010ull))
+#define CVMX_UAHCX_OHCI_USBCMD	(CVMX_ADD_IO_SEG(0x00016F0000000408ull))
+
 /* Octeon Random Number Generator.  */
 static int __init octeon_rng_device_init(void)
 {
@@ -78,12 +72,36 @@ static DEFINE_MUTEX(octeon2_usb_clocks_mutex);
 
 static int octeon2_usb_clock_start_cnt;
 
+static int __init octeon2_usb_reset(void)
+{
+	union cvmx_uctlx_clk_rst_ctl clk_rst_ctl;
+	u32 ucmd;
+
+	if (!OCTEON_IS_OCTEON2())
+		return 0;
+
+	clk_rst_ctl.u64 = cvmx_read_csr(CVMX_UCTLX_CLK_RST_CTL(0));
+	if (clk_rst_ctl.s.hrst) {
+		ucmd = cvmx_read64_uint32(CVMX_UAHCX_EHCI_USBCMD);
+		ucmd &= ~CMD_RUN;
+		cvmx_write64_uint32(CVMX_UAHCX_EHCI_USBCMD, ucmd);
+		mdelay(2);
+		ucmd |= CMD_RESET;
+		cvmx_write64_uint32(CVMX_UAHCX_EHCI_USBCMD, ucmd);
+		ucmd = cvmx_read64_uint32(CVMX_UAHCX_OHCI_USBCMD);
+		ucmd |= CMD_RUN;
+		cvmx_write64_uint32(CVMX_UAHCX_OHCI_USBCMD, ucmd);
+	}
+
+	return 0;
+}
+arch_initcall(octeon2_usb_reset);
+
 static void octeon2_usb_clocks_start(struct device *dev)
 {
 	u64 div;
 	union cvmx_uctlx_if_ena if_ena;
 	union cvmx_uctlx_clk_rst_ctl clk_rst_ctl;
-	union cvmx_uctlx_uphy_ctl_status uphy_ctl_status;
 	union cvmx_uctlx_uphy_portx_ctl_status port_ctl_status;
 	int i;
 	unsigned long io_clk_64_to_ns;
@@ -131,6 +149,17 @@ static void octeon2_usb_clocks_start(struct device *dev)
 	if_ena.s.en = 1;
 	cvmx_write_csr(CVMX_UCTLX_IF_ENA(0), if_ena.u64);
 
+	for (i = 0; i <= 1; i++) {
+		port_ctl_status.u64 =
+			cvmx_read_csr(CVMX_UCTLX_UPHY_PORTX_CTL_STATUS(i, 0));
+		/* Set txvreftune to 15 to obtain compliant 'eye' diagram. */
+		port_ctl_status.s.txvreftune = 15;
+		port_ctl_status.s.txrisetune = 1;
+		port_ctl_status.s.txpreemphasistune = 1;
+		cvmx_write_csr(CVMX_UCTLX_UPHY_PORTX_CTL_STATUS(i, 0),
+			       port_ctl_status.u64);
+	}
+
 	/* Step 3: Configure the reference clock, PHY, and HCLK */
 	clk_rst_ctl.u64 = cvmx_read_csr(CVMX_UCTLX_CLK_RST_CTL(0));
 
@@ -218,29 +247,10 @@ static void octeon2_usb_clocks_start(struct device *dev)
 	clk_rst_ctl.s.p_por = 0;
 	cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64);
 
-	/* Step 5:    Wait 1 ms for the PHY clock to start. */
-	mdelay(1);
+	/* Step 5:    Wait 3 ms for the PHY clock to start. */
+	mdelay(3);
 
-	/*
-	 * Step 6: Program the reset input from automatic test
-	 * equipment field in the UPHY CSR
-	 */
-	uphy_ctl_status.u64 = cvmx_read_csr(CVMX_UCTLX_UPHY_CTL_STATUS(0));
-	uphy_ctl_status.s.ate_reset = 1;
-	cvmx_write_csr(CVMX_UCTLX_UPHY_CTL_STATUS(0), uphy_ctl_status.u64);
-
-	/* Step 7: Wait for at least 10ns. */
-	ndelay(10);
-
-	/* Step 8: Clear the ATE_RESET field in the UPHY CSR. */
-	uphy_ctl_status.s.ate_reset = 0;
-	cvmx_write_csr(CVMX_UCTLX_UPHY_CTL_STATUS(0), uphy_ctl_status.u64);
-
-	/*
-	 * Step 9: Wait for at least 20ns for UPHY to output PHY clock
-	 * signals and OHCI_CLK48
-	 */
-	ndelay(20);
+	/* Steps 6..9 for ATE only, are skipped. */
 
 	/* Step 10: Configure the OHCI_CLK48 and OHCI_CLK12 clocks. */
 	/* 10a */
@@ -261,6 +271,20 @@ static void octeon2_usb_clocks_start(struct device *dev)
 	clk_rst_ctl.s.p_prst = 1;
 	cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64);
 
+	/* Step 11b */
+	udelay(1);
+
+	/* Step 11c */
+	clk_rst_ctl.s.p_prst = 0;
+	cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64);
+
+	/* Step 11d */
+	mdelay(1);
+
+	/* Step 11e */
+	clk_rst_ctl.s.p_prst = 1;
+	cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64);
+
 	/* Step 12: Wait 1 uS. */
 	udelay(1);
 
@@ -269,21 +293,9 @@ static void octeon2_usb_clocks_start(struct device *dev)
 	cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64);
 
 end_clock:
-	/* Now we can set some other registers.  */
-
-	for (i = 0; i <= 1; i++) {
-		port_ctl_status.u64 =
-			cvmx_read_csr(CVMX_UCTLX_UPHY_PORTX_CTL_STATUS(i, 0));
-		/* Set txvreftune to 15 to obtain compliant 'eye' diagram. */
-		port_ctl_status.s.txvreftune = 15;
-		port_ctl_status.s.txrisetune = 1;
-		port_ctl_status.s.txpreemphasistune = 1;
-		cvmx_write_csr(CVMX_UCTLX_UPHY_PORTX_CTL_STATUS(i, 0),
-			       port_ctl_status.u64);
-	}
-
 	/* Set uSOF cycle period to 60,000 bits. */
 	cvmx_write_csr(CVMX_UCTLX_EHCI_FLA(0), 0x20ull);
+
 exit:
 	mutex_unlock(&octeon2_usb_clocks_mutex);
 }
@@ -311,7 +323,11 @@ static struct usb_ehci_pdata octeon_ehci_pdata = {
 #ifdef __BIG_ENDIAN
 	.big_endian_mmio	= 1,
 #endif
-	.dma_mask_64	= 1,
+	/*
+	 * We can DMA from anywhere. But the descriptors must be in
+	 * the lower 4GB.
+	 */
+	.dma_mask_64	= 0,
 	.power_on	= octeon_ehci_power_on,
 	.power_off	= octeon_ehci_power_off,
 };
@@ -689,6 +705,10 @@ int __init octeon_prune_device_tree(void)
 	if (fdt_check_header(initial_boot_params))
 		panic("Corrupt Device Tree.");
 
+	WARN(octeon_bootinfo->board_type == CVMX_BOARD_TYPE_CUST_DSR1000N,
+	     "Built-in DTB booting is deprecated on %s. Please switch to use appended DTB.",
+	     cvmx_board_type_to_string(octeon_bootinfo->board_type));
+
 	aliases = fdt_path_offset(initial_boot_params, "/aliases");
 	if (aliases < 0) {
 		pr_err("Error: No /aliases node in device tree.");
@@ -1032,13 +1052,6 @@ end_led:
 		}
 	}
 
-	if (octeon_bootinfo->board_type != CVMX_BOARD_TYPE_CUST_DSR1000N) {
-		int dsr1000n_leds = fdt_path_offset(initial_boot_params,
-						    "/dsr1000n-leds");
-		if (dsr1000n_leds >= 0)
-			fdt_nop_node(initial_boot_params, dsr1000n_leds);
-	}
-
 	return 0;
 }