arch: remove blackfin port

The Analog Devices Blackfin port was added in 2007 and was rather
active for a while, but all work on it has come to a standstill
over time, as Analog have changed their product line-up.

Aaron Wu confirmed that the architecture port is no longer relevant,
and multiple people suggested removing blackfin independently because
of some of its oddities like a non-working SMP port, and the amount of
duplication between the chip variants, which cause extra work when
doing cross-architecture changes.

Link: https://docs.blackfin.uclinux.org/
Acked-by: Aaron Wu <Aaron.Wu@analog.com>
Acked-by: Bryan Wu <cooloney@gmail.com>
Cc: Steven Miao <realmz6@gmail.com>
Cc: Mike Frysinger <vapier@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

3 files changed, 0 insertions, 1005 deletions

diff --git a/arch/blackfin/mach-bf538/boards/Kconfig b/arch/blackfin/mach-bf538/boards/Kconfig
deleted file mode 100644
index 114cff440d43..000000000000
--- a/arch/blackfin/mach-bf538/boards/Kconfig
+++ /dev/null
@@ -1,13 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-choice
-	prompt "System type"
-	default BFIN538_EZKIT
-	help
-	  Select your board!
-
-config BFIN538_EZKIT
-	bool "BF538-EZKIT"
-	help
-	  BF538-EZKIT-LITE board support.
-
-endchoice
diff --git a/arch/blackfin/mach-bf538/boards/Makefile b/arch/blackfin/mach-bf538/boards/Makefile
deleted file mode 100644
index 6143b320d585..000000000000
--- a/arch/blackfin/mach-bf538/boards/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# arch/blackfin/mach-bf538/boards/Makefile
-#
-
-obj-$(CONFIG_BFIN538_EZKIT)            += ezkit.o
diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c
deleted file mode 100644
index 1b6a52ad8a0e..000000000000
--- a/arch/blackfin/mach-bf538/boards/ezkit.c
+++ /dev/null
@@ -1,987 +0,0 @@
-/*
- * Copyright 2004-2009 Analog Devices Inc.
- *                2005 National ICT Australia (NICTA)
- *                      Aidan Williams <aidan@nicta.com.au>
- *
- * Licensed under the GPL-2
- */
-
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-#include <asm/bfin5xx_spi.h>
-#include <asm/dma.h>
-#include <asm/nand.h>
-#include <asm/portmux.h>
-#include <asm/dpmc.h>
-#include <linux/input.h>
-
-/*
- * Name the Board for the /proc/cpuinfo
- */
-const char bfin_board_name[] = "ADI BF538-EZKIT";
-
-/*
- *  Driver needs to know address, irq and flag pin.
- */
-
-
-#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
-static struct platform_device rtc_device = {
-	.name = "rtc-bfin",
-	.id   = -1,
-};
-#endif	/* CONFIG_RTC_DRV_BFIN */
-
-#if IS_ENABLED(CONFIG_SERIAL_BFIN)
-#ifdef CONFIG_SERIAL_BFIN_UART0
-static struct resource bfin_uart0_resources[] = {
-	{
-		.start = UART0_THR,
-		.end = UART0_GCTL+2,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART0_TX,
-		.end = IRQ_UART0_TX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART0_ERROR,
-		.end = IRQ_UART0_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART0_TX,
-		.end = CH_UART0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	{
-		.start = CH_UART0_RX,
-		.end = CH_UART0_RX,
-		.flags = IORESOURCE_DMA,
-	},
-#ifdef CONFIG_BFIN_UART0_CTSRTS
-	{	/* CTS pin */
-		.start = GPIO_PG7,
-		.end = GPIO_PG7,
-		.flags = IORESOURCE_IO,
-	},
-	{	/* RTS pin */
-		.start = GPIO_PG6,
-		.end = GPIO_PG6,
-		.flags = IORESOURCE_IO,
-	},
-#endif
-};
-
-static unsigned short bfin_uart0_peripherals[] = {
-	P_UART0_TX, P_UART0_RX, 0
-};
-
-static struct platform_device bfin_uart0_device = {
-	.name = "bfin-uart",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
-	.resource = bfin_uart0_resources,
-	.dev = {
-		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
-	},
-};
-#endif	/* CONFIG_SERIAL_BFIN_UART0 */
-#ifdef CONFIG_SERIAL_BFIN_UART1
-static struct resource bfin_uart1_resources[] = {
-	{
-		.start = UART1_THR,
-		.end = UART1_GCTL+2,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART1_TX,
-		.end = IRQ_UART1_TX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART1_ERROR,
-		.end = IRQ_UART1_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART1_TX,
-		.end = CH_UART1_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	{
-		.start = CH_UART1_RX,
-		.end = CH_UART1_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static unsigned short bfin_uart1_peripherals[] = {
-	P_UART1_TX, P_UART1_RX, 0
-};
-
-static struct platform_device bfin_uart1_device = {
-	.name = "bfin-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
-	.resource = bfin_uart1_resources,
-	.dev = {
-		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
-	},
-};
-#endif	/* CONFIG_SERIAL_BFIN_UART1 */
-#ifdef CONFIG_SERIAL_BFIN_UART2
-static struct resource bfin_uart2_resources[] = {
-	{
-		.start = UART2_THR,
-		.end = UART2_GCTL+2,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART2_TX,
-		.end = IRQ_UART2_TX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART2_RX,
-		.end = IRQ_UART2_RX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART2_ERROR,
-		.end = IRQ_UART2_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART2_TX,
-		.end = CH_UART2_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	{
-		.start = CH_UART2_RX,
-		.end = CH_UART2_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static unsigned short bfin_uart2_peripherals[] = {
-	P_UART2_TX, P_UART2_RX, 0
-};
-
-static struct platform_device bfin_uart2_device = {
-	.name = "bfin-uart",
-	.id = 2,
-	.num_resources = ARRAY_SIZE(bfin_uart2_resources),
-	.resource = bfin_uart2_resources,
-	.dev = {
-		.platform_data = &bfin_uart2_peripherals, /* Passed to driver */
-	},
-};
-#endif	/* CONFIG_SERIAL_BFIN_UART2 */
-#endif	/* CONFIG_SERIAL_BFIN */
-
-#if IS_ENABLED(CONFIG_BFIN_SIR)
-#ifdef CONFIG_BFIN_SIR0
-static struct resource bfin_sir0_resources[] = {
-	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART0_RX,
-		.end = CH_UART0_RX+1,
-		.flags = IORESOURCE_DMA,
-	},
-};
-static struct platform_device bfin_sir0_device = {
-	.name = "bfin_sir",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
-	.resource = bfin_sir0_resources,
-};
-#endif	/* CONFIG_BFIN_SIR0 */
-#ifdef CONFIG_BFIN_SIR1
-static struct resource bfin_sir1_resources[] = {
-	{
-		.start = 0xFFC02000,
-		.end = 0xFFC020FF,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART1_RX,
-		.end = CH_UART1_RX+1,
-		.flags = IORESOURCE_DMA,
-	},
-};
-static struct platform_device bfin_sir1_device = {
-	.name = "bfin_sir",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
-	.resource = bfin_sir1_resources,
-};
-#endif	/* CONFIG_BFIN_SIR1 */
-#ifdef CONFIG_BFIN_SIR2
-static struct resource bfin_sir2_resources[] = {
-	{
-		.start = 0xFFC02100,
-		.end = 0xFFC021FF,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART2_RX,
-		.end = IRQ_UART2_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART2_RX,
-		.end = CH_UART2_RX+1,
-		.flags = IORESOURCE_DMA,
-	},
-};
-static struct platform_device bfin_sir2_device = {
-	.name = "bfin_sir",
-	.id = 2,
-	.num_resources = ARRAY_SIZE(bfin_sir2_resources),
-	.resource = bfin_sir2_resources,
-};
-#endif	/* CONFIG_BFIN_SIR2 */
-#endif	/* CONFIG_BFIN_SIR */
-
-#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
-#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
-static struct resource bfin_sport0_uart_resources[] = {
-	{
-		.start = SPORT0_TCR1,
-		.end = SPORT0_MRCS3+4,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_SPORT0_RX,
-		.end = IRQ_SPORT0_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_SPORT0_ERROR,
-		.end = IRQ_SPORT0_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static unsigned short bfin_sport0_peripherals[] = {
-	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
-	P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
-};
-
-static struct platform_device bfin_sport0_uart_device = {
-	.name = "bfin-sport-uart",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
-	.resource = bfin_sport0_uart_resources,
-	.dev = {
-		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
-	},
-};
-#endif	/* CONFIG_SERIAL_BFIN_SPORT0_UART */
-#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
-static struct resource bfin_sport1_uart_resources[] = {
-	{
-		.start = SPORT1_TCR1,
-		.end = SPORT1_MRCS3+4,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_SPORT1_RX,
-		.end = IRQ_SPORT1_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_SPORT1_ERROR,
-		.end = IRQ_SPORT1_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static unsigned short bfin_sport1_peripherals[] = {
-	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
-	P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
-};
-
-static struct platform_device bfin_sport1_uart_device = {
-	.name = "bfin-sport-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
-	.resource = bfin_sport1_uart_resources,
-	.dev = {
-		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
-	},
-};
-#endif	/* CONFIG_SERIAL_BFIN_SPORT1_UART */
-#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
-static struct resource bfin_sport2_uart_resources[] = {
-	{
-		.start = SPORT2_TCR1,
-		.end = SPORT2_MRCS3+4,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_SPORT2_RX,
-		.end = IRQ_SPORT2_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_SPORT2_ERROR,
-		.end = IRQ_SPORT2_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static unsigned short bfin_sport2_peripherals[] = {
-	P_SPORT2_TFS, P_SPORT2_DTPRI, P_SPORT2_TSCLK, P_SPORT2_RFS,
-	P_SPORT2_DRPRI, P_SPORT2_RSCLK, P_SPORT2_DRSEC, P_SPORT2_DTSEC, 0
-};
-
-static struct platform_device bfin_sport2_uart_device = {
-	.name = "bfin-sport-uart",
-	.id = 2,
-	.num_resources = ARRAY_SIZE(bfin_sport2_uart_resources),
-	.resource = bfin_sport2_uart_resources,
-	.dev = {
-		.platform_data = &bfin_sport2_peripherals, /* Passed to driver */
-	},
-};
-#endif	/* CONFIG_SERIAL_BFIN_SPORT2_UART */
-#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
-static struct resource bfin_sport3_uart_resources[] = {
-	{
-		.start = SPORT3_TCR1,
-		.end = SPORT3_MRCS3+4,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_SPORT3_RX,
-		.end = IRQ_SPORT3_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_SPORT3_ERROR,
-		.end = IRQ_SPORT3_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static unsigned short bfin_sport3_peripherals[] = {
-	P_SPORT3_TFS, P_SPORT3_DTPRI, P_SPORT3_TSCLK, P_SPORT3_RFS,
-	P_SPORT3_DRPRI, P_SPORT3_RSCLK, P_SPORT3_DRSEC, P_SPORT3_DTSEC, 0
-};
-
-static struct platform_device bfin_sport3_uart_device = {
-	.name = "bfin-sport-uart",
-	.id = 3,
-	.num_resources = ARRAY_SIZE(bfin_sport3_uart_resources),
-	.resource = bfin_sport3_uart_resources,
-	.dev = {
-		.platform_data = &bfin_sport3_peripherals, /* Passed to driver */
-	},
-};
-#endif	/* CONFIG_SERIAL_BFIN_SPORT3_UART */
-#endif	/* CONFIG_SERIAL_BFIN_SPORT */
-
-#if IS_ENABLED(CONFIG_CAN_BFIN)
-static unsigned short bfin_can_peripherals[] = {
-	P_CAN0_RX, P_CAN0_TX, 0
-};
-
-static struct resource bfin_can_resources[] = {
-	{
-		.start = 0xFFC02A00,
-		.end = 0xFFC02FFF,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_CAN_RX,
-		.end = IRQ_CAN_RX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_CAN_TX,
-		.end = IRQ_CAN_TX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_CAN_ERROR,
-		.end = IRQ_CAN_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_can_device = {
-	.name = "bfin_can",
-	.num_resources = ARRAY_SIZE(bfin_can_resources),
-	.resource = bfin_can_resources,
-	.dev = {
-		.platform_data = &bfin_can_peripherals, /* Passed to driver */
-	},
-};
-#endif	/* CONFIG_CAN_BFIN */
-
-/*
- *  USB-LAN EzExtender board
- *  Driver needs to know address, irq and flag pin.
- */
-#if IS_ENABLED(CONFIG_SMC91X)
-#include <linux/smc91x.h>
-
-static struct smc91x_platdata smc91x_info = {
-	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
-	.leda = RPC_LED_100_10,
-	.ledb = RPC_LED_TX_RX,
-};
-
-static struct resource smc91x_resources[] = {
-	{
-		.name = "smc91x-regs",
-		.start = 0x20310300,
-		.end = 0x20310300 + 16,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = IRQ_PF0,
-		.end = IRQ_PF0,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-static struct platform_device smc91x_device = {
-	.name = "smc91x",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(smc91x_resources),
-	.resource = smc91x_resources,
-	.dev	= {
-		.platform_data	= &smc91x_info,
-	},
-};
-#endif	/* CONFIG_SMC91X */
-
-#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
-/* all SPI peripherals info goes here */
-#if IS_ENABLED(CONFIG_MTD_M25P80)
-/* SPI flash chip (m25p16) */
-static struct mtd_partition bfin_spi_flash_partitions[] = {
-	{
-		.name = "bootloader(spi)",
-		.size = 0x00040000,
-		.offset = 0,
-		.mask_flags = MTD_CAP_ROM
-	}, {
-		.name = "linux kernel(spi)",
-		.size = 0x1c0000,
-		.offset = 0x40000
-	}
-};
-
-static struct flash_platform_data bfin_spi_flash_data = {
-	.name = "m25p80",
-	.parts = bfin_spi_flash_partitions,
-	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
-	.type = "m25p16",
-};
-
-static struct bfin5xx_spi_chip spi_flash_chip_info = {
-	.enable_dma = 0,         /* use dma transfer with this chip*/
-};
-#endif	/* CONFIG_MTD_M25P80 */
-#endif	/* CONFIG_SPI_BFIN5XX */
-
-#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879)
-#include <linux/platform_data/ad7879.h>
-static const struct ad7879_platform_data bfin_ad7879_ts_info = {
-	.model			= 7879,	/* Model = AD7879 */
-	.x_plate_ohms		= 620,	/* 620 Ohm from the touch datasheet */
-	.pressure_max		= 10000,
-	.pressure_min		= 0,
-	.first_conversion_delay = 3,	/* wait 512us before do a first conversion */
-	.acquisition_time 	= 1,	/* 4us acquisition time per sample */
-	.median			= 2,	/* do 8 measurements */
-	.averaging 		= 1,	/* take the average of 4 middle samples */
-	.pen_down_acc_interval 	= 255,	/* 9.4 ms */
-	.gpio_export		= 1,	/* Export GPIO to gpiolib */
-	.gpio_base		= -1,	/* Dynamic allocation */
-};
-#endif	/* CONFIG_TOUCHSCREEN_AD7879 */
-
-#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
-#include <asm/bfin-lq035q1.h>
-
-static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
-	.mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
-	.ppi_mode = USE_RGB565_16_BIT_PPI,
-	.use_bl = 0,	/* let something else control the LCD Blacklight */
-	.gpio_bl = GPIO_PF7,
-};
-
-static struct resource bfin_lq035q1_resources[] = {
-	{
-		.start = IRQ_PPI_ERROR,
-		.end = IRQ_PPI_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_lq035q1_device = {
-	.name		= "bfin-lq035q1",
-	.id		= -1,
-	.num_resources 	= ARRAY_SIZE(bfin_lq035q1_resources),
-	.resource 	= bfin_lq035q1_resources,
-	.dev		= {
-		.platform_data = &bfin_lq035q1_data,
-	},
-};
-#endif	/* CONFIG_FB_BFIN_LQ035Q1 */
-
-static struct spi_board_info bf538_spi_board_info[] __initdata = {
-#if IS_ENABLED(CONFIG_MTD_M25P80)
-	{
-		/* the modalias must be the same as spi device driver name */
-		.modalias = "m25p80", /* Name of spi_driver for this device */
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0, /* Framework bus number */
-		.chip_select = 1, /* SPI_SSEL1*/
-		.platform_data = &bfin_spi_flash_data,
-		.controller_data = &spi_flash_chip_info,
-		.mode = SPI_MODE_3,
-	},
-#endif	/* CONFIG_MTD_M25P80 */
-#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI)
-	{
-		.modalias = "ad7879",
-		.platform_data = &bfin_ad7879_ts_info,
-		.irq = IRQ_PF3,
-		.max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 1,
-		.mode = SPI_CPHA | SPI_CPOL,
-	},
-#endif	/* CONFIG_TOUCHSCREEN_AD7879_SPI */
-#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
-	{
-		.modalias = "bfin-lq035q1-spi",
-		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 2,
-		.mode = SPI_CPHA | SPI_CPOL,
-	},
-#endif	/* CONFIG_FB_BFIN_LQ035Q1 */
-#if IS_ENABLED(CONFIG_SPI_SPIDEV)
-	{
-		.modalias = "spidev",
-		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 1,
-	},
-#endif	/* CONFIG_SPI_SPIDEV */
-};
-
-/* SPI (0) */
-static struct resource bfin_spi0_resource[] = {
-	[0] = {
-		.start = SPI0_REGBASE,
-		.end   = SPI0_REGBASE + 0xFF,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = CH_SPI0,
-		.end   = CH_SPI0,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = IRQ_SPI0,
-		.end   = IRQ_SPI0,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-/* SPI (1) */
-static struct resource bfin_spi1_resource[] = {
-	[0] = {
-		.start = SPI1_REGBASE,
-		.end   = SPI1_REGBASE + 0xFF,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = CH_SPI1,
-		.end   = CH_SPI1,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = IRQ_SPI1,
-		.end   = IRQ_SPI1,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-/* SPI (2) */
-static struct resource bfin_spi2_resource[] = {
-	[0] = {
-		.start = SPI2_REGBASE,
-		.end   = SPI2_REGBASE + 0xFF,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = CH_SPI2,
-		.end   = CH_SPI2,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = IRQ_SPI2,
-		.end   = IRQ_SPI2,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-/* SPI controller data */
-static struct bfin5xx_spi_master bf538_spi_master_info0 = {
-	.num_chipselect = 8,
-	.enable_dma = 1,  /* master has the ability to do dma transfer */
-	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
-};
-
-static struct platform_device bf538_spi_master0 = {
-	.name = "bfin-spi",
-	.id = 0, /* Bus number */
-	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
-	.resource = bfin_spi0_resource,
-	.dev = {
-		.platform_data = &bf538_spi_master_info0, /* Passed to driver */
-		},
-};
-
-static struct bfin5xx_spi_master bf538_spi_master_info1 = {
-	.num_chipselect = 2,
-	.enable_dma = 1,  /* master has the ability to do dma transfer */
-	.pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
-};
-
-static struct platform_device bf538_spi_master1 = {
-	.name = "bfin-spi",
-	.id = 1, /* Bus number */
-	.num_resources = ARRAY_SIZE(bfin_spi1_resource),
-	.resource = bfin_spi1_resource,
-	.dev = {
-		.platform_data = &bf538_spi_master_info1, /* Passed to driver */
-		},
-};
-
-static struct bfin5xx_spi_master bf538_spi_master_info2 = {
-	.num_chipselect = 2,
-	.enable_dma = 1,  /* master has the ability to do dma transfer */
-	.pin_req = {P_SPI2_SCK, P_SPI2_MISO, P_SPI2_MOSI, 0},
-};
-
-static struct platform_device bf538_spi_master2 = {
-	.name = "bfin-spi",
-	.id = 2, /* Bus number */
-	.num_resources = ARRAY_SIZE(bfin_spi2_resource),
-	.resource = bfin_spi2_resource,
-	.dev = {
-		.platform_data = &bf538_spi_master_info2, /* Passed to driver */
-		},
-};
-
-#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
-static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
-
-static struct resource bfin_twi0_resource[] = {
-	[0] = {
-		.start = TWI0_REGBASE,
-		.end   = TWI0_REGBASE + 0xFF,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_TWI0,
-		.end   = IRQ_TWI0,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device i2c_bfin_twi0_device = {
-	.name = "i2c-bfin-twi",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
-	.resource = bfin_twi0_resource,
-	.dev = {
-		.platform_data = &bfin_twi0_pins,
-	},
-};
-
-static const u16 bfin_twi1_pins[] = {P_TWI1_SCL, P_TWI1_SDA, 0};
-
-static struct resource bfin_twi1_resource[] = {
-	[0] = {
-		.start = TWI1_REGBASE,
-		.end   = TWI1_REGBASE + 0xFF,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_TWI1,
-		.end   = IRQ_TWI1,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device i2c_bfin_twi1_device = {
-	.name = "i2c-bfin-twi",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_twi1_resource),
-	.resource = bfin_twi1_resource,
-};
-#endif	/* CONFIG_I2C_BLACKFIN_TWI */
-
-#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
-#include <linux/gpio_keys.h>
-
-static struct gpio_keys_button bfin_gpio_keys_table[] = {
-	{BTN_0, GPIO_PC7, 1, "gpio-keys: BTN0"},
-};
-
-static struct gpio_keys_platform_data bfin_gpio_keys_data = {
-	.buttons        = bfin_gpio_keys_table,
-	.nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
-};
-
-static struct platform_device bfin_device_gpiokeys = {
-	.name      = "gpio-keys",
-	.dev = {
-		.platform_data = &bfin_gpio_keys_data,
-	},
-};
-#endif
-
-static const unsigned int cclk_vlev_datasheet[] =
-{
-/*
- * Internal VLEV BF538SBBC1533
- ****temporarily using these values until data sheet is updated
- */
-	VRPAIR(VLEV_100, 150000000),
-	VRPAIR(VLEV_100, 250000000),
-	VRPAIR(VLEV_110, 276000000),
-	VRPAIR(VLEV_115, 301000000),
-	VRPAIR(VLEV_120, 525000000),
-	VRPAIR(VLEV_125, 550000000),
-	VRPAIR(VLEV_130, 600000000),
-};
-
-static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
-	.tuple_tab = cclk_vlev_datasheet,
-	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
-	.vr_settling_time = 25 /* us */,
-};
-
-static struct platform_device bfin_dpmc = {
-	.name = "bfin dpmc",
-	.dev = {
-		.platform_data = &bfin_dmpc_vreg_data,
-	},
-};
-
-#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
-static struct mtd_partition ezkit_partitions[] = {
-	{
-		.name       = "bootloader(nor)",
-		.size       = 0x40000,
-		.offset     = 0,
-	}, {
-		.name       = "linux kernel(nor)",
-		.size       = 0x180000,
-		.offset     = MTDPART_OFS_APPEND,
-	}, {
-		.name       = "file system(nor)",
-		.size       = MTDPART_SIZ_FULL,
-		.offset     = MTDPART_OFS_APPEND,
-	}
-};
-
-static struct physmap_flash_data ezkit_flash_data = {
-	.width      = 2,
-	.parts      = ezkit_partitions,
-	.nr_parts   = ARRAY_SIZE(ezkit_partitions),
-};
-
-static struct resource ezkit_flash_resource = {
-	.start = 0x20000000,
-#if IS_ENABLED(CONFIG_SMC91X)
-	.end   = 0x202fffff,
-#else
-	.end   = 0x203fffff,
-#endif
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device ezkit_flash_device = {
-	.name          = "physmap-flash",
-	.id            = 0,
-	.dev = {
-		.platform_data = &ezkit_flash_data,
-	},
-	.num_resources = 1,
-	.resource      = &ezkit_flash_resource,
-};
-#endif
-
-static struct platform_device *cm_bf538_devices[] __initdata = {
-
-	&bfin_dpmc,
-
-#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
-	&rtc_device,
-#endif
-
-#if IS_ENABLED(CONFIG_SERIAL_BFIN)
-#ifdef CONFIG_SERIAL_BFIN_UART0
-	&bfin_uart0_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART1
-	&bfin_uart1_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART2
-	&bfin_uart2_device,
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
-	&bf538_spi_master0,
-	&bf538_spi_master1,
-	&bf538_spi_master2,
-#endif
-
-#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
-	&i2c_bfin_twi0_device,
-	&i2c_bfin_twi1_device,
-#endif
-
-#if IS_ENABLED(CONFIG_BFIN_SIR)
-#ifdef CONFIG_BFIN_SIR0
-	&bfin_sir0_device,
-#endif
-#ifdef CONFIG_BFIN_SIR1
-	&bfin_sir1_device,
-#endif
-#ifdef CONFIG_BFIN_SIR2
-	&bfin_sir2_device,
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
-#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
-	&bfin_sport0_uart_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
-	&bfin_sport1_uart_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
-	&bfin_sport2_uart_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
-	&bfin_sport3_uart_device,
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_CAN_BFIN)
-	&bfin_can_device,
-#endif
-
-#if IS_ENABLED(CONFIG_SMC91X)
-	&smc91x_device,
-#endif
-
-#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
-	&bfin_lq035q1_device,
-#endif
-
-#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
-	&bfin_device_gpiokeys,
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
-	&ezkit_flash_device,
-#endif
-};
-
-static int __init ezkit_init(void)
-{
-	printk(KERN_INFO "%s(): registering device resources\n", __func__);
-	platform_add_devices(cm_bf538_devices, ARRAY_SIZE(cm_bf538_devices));
-
-#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
-	spi_register_board_info(bf538_spi_board_info,
-			ARRAY_SIZE(bf538_spi_board_info));
-#endif
-
-	return 0;
-}
-
-arch_initcall(ezkit_init);
-
-static struct platform_device *ezkit_early_devices[] __initdata = {
-#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
-#ifdef CONFIG_SERIAL_BFIN_UART0
-	&bfin_uart0_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART1
-	&bfin_uart1_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART2
-	&bfin_uart2_device,
-#endif
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
-#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
-	&bfin_sport0_uart_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
-	&bfin_sport1_uart_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
-	&bfin_sport2_uart_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
-	&bfin_sport3_uart_device,
-#endif
-#endif
-};
-
-void __init native_machine_early_platform_add_devices(void)
-{
-	printk(KERN_INFO "register early platform devices\n");
-	early_platform_add_devices(ezkit_early_devices,
-		ARRAY_SIZE(ezkit_early_devices));
-}