Merge tag 'arm-boardfiles-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM boardfile deprecation from Arnd Bergmann:
 "Over the past ten years, new machine support was based on device tree,
  and an initial set of about 400 boards using ATAGS with boardfile for
  booting were grandfathered in, with about half of them either removed
  or converted to DT over time.

  Based on the recent mailing list discussion I started, I have now
  turned the findings into a set of patches that marks most board files
  as 'depends on UNUSED_BOARD_FILES', leaving only 38 of the 196 boards.

  For the boards that are marked as unused, there are two final chances
  for potential users: The removal is scheduled to take place after the
  longterm stable kernel at the end of 2022, so users can stay on that
  version for another few years, and if anyone still has one of these
  machines and is planning to keep updating kernels beyond that version,
  they can speak up now to have their boards taken off the list again.

  Waiting for the LTS release also makes sure that there will be at
  least one longterm kernel that contains the recent multiplatform
  conversion along while still supporting all legacy boards.

  The short summary of the current status is:

   - The s3c24xx, cns3xxx, iop32x and mv78xx0 platforms have no known
     users and will be removed entirely.

   - The mmp and davinci platforms have DT support for the important
     machines and will become DT-only after this.

   - s3c64xx, dove, orion5x, and pxa keep some board files to allow
     those to be migrated over to DT more easily, but most board files
     are getting removed now. DT support on these platforms is partially
     working but requires changes to additional drivers for the other
     boards.

   - omap1, ep93xx, sa1100, footbridge and rpc have no DT support at the
     moment but have some boards with known users. Removing the board
     files that nobody uses should make it easier to try a DT conversion
     if anyone cares.

  There is no explicit timeline what happens with the boards that remain
  after this removal, but I expect to revisit this in the future, and
  with most boards gone, there will be a good time to do a treewide
  review of platform drivers that never gained DT support and have no
  remaining in-tree board files"

Link: https://lore.kernel.org/linux-arm-kernel/CAK8P3a0Z9vGEQbVRBo84bSyPFM-LF+hs5w8ZA51g2Z+NsdtDQA@mail.gmail.com/

* tag 'arm-boardfiles-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: cns3xxx: add CONFIG_UNUSED_BOARD_FILES dependency
  ARM: iop32x: mark as unused
  ARM: s3c: mark most board files as unused
  ARM: omap1: add Kconfig dependencies for unused boards
  ARM: sa1100: mark most boards as unused
  ARM: footbridge: mark cats board for removal
  ARM: mmp: mark all board files for removal
  ARM: ep93xx: mark most board files as unused
  ARM: davinci: mark all ATAGS board files as unused
  ARM: orion: add ATAGS dependencies
  ARM: pxa: add Kconfig dependencies for ATAGS based boards
  ARM: add CONFIG_UNUSED_BOARD_FILES
  ARM: add ATAGS dependencies to non-DT platforms

58 files changed, 197 insertions, 164 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index cb37b17226e5..405596676473 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -350,6 +350,7 @@ config ARCH_MULTIPLATFORM
 config ARCH_FOOTBRIDGE
 	bool "FootBridge"
 	depends on CPU_LITTLE_ENDIAN
+	depends on ATAGS
 	select CPU_SA110
 	select FOOTBRIDGE
 	select NEED_MACH_MEMORY_H
@@ -361,6 +362,7 @@ config ARCH_RPC
 	bool "RiscPC"
 	depends on !CC_IS_CLANG && GCC_VERSION < 90100 && GCC_VERSION >= 60000
 	depends on CPU_LITTLE_ENDIAN
+	depends on ATAGS
 	select ARCH_ACORN
 	select ARCH_MAY_HAVE_PC_FDC
 	select ARCH_SPARSEMEM_ENABLE
@@ -380,6 +382,7 @@ config ARCH_RPC
 config ARCH_SA1100
 	bool "SA1100-based"
 	depends on CPU_LITTLE_ENDIAN
+	depends on ATAGS
 	select ARCH_MTD_XIP
 	select ARCH_SPARSEMEM_ENABLE
 	select CLKSRC_MMIO
@@ -1541,14 +1544,26 @@ config USE_OF
 	  Include support for flattened device tree machine descriptions.
 
 config ATAGS
-	bool "Support for the traditional ATAGS boot data passing" if USE_OF
+	bool "Support for the traditional ATAGS boot data passing"
 	default y
 	help
 	  This is the traditional way of passing data to the kernel at boot
 	  time. If you are solely relying on the flattened device tree (or
 	  the ARM_ATAG_DTB_COMPAT option) then you may unselect this option
-	  to remove ATAGS support from your kernel binary.  If unsure,
-	  leave this to y.
+	  to remove ATAGS support from your kernel binary.
+
+config UNUSED_BOARD_FILES
+	bool "Board support for machines without known users"
+	depends on ATAGS
+	help
+	  Most ATAGS based board files are completely unused and are
+	  scheduled for removal in early 2023, and left out of kernels
+	  by default now.  If you are using a board file that is marked
+	  as unused, turn on this option to build support into the kernel.
+
+	  To keep support for your individual board from being removed,
+	  send a reply to the email discussion at
+	  https://lore.kernel.org/all/CAK8P3a0Z9vGEQbVRBo84bSyPFM-LF+hs5w8ZA51g2Z+NsdtDQA@mail.gmail.com/
 
 config DEPRECATED_PARAM_STRUCT
 	bool "Provide old way to pass kernel parameters"
diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig
index 179788073afd..506f3378da07 100644
--- a/arch/arm/configs/badge4_defconfig
+++ b/arch/arm/configs/badge4_defconfig
@@ -2,6 +2,7 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_EXPERT=y
 CONFIG_ARCH_SA1100=y
 CONFIG_SA1100_BADGE4=y
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="init=/linuxrc root=/dev/mtdblock3"
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_FPE_NWFPE=y
diff --git a/arch/arm/configs/cerfcube_defconfig b/arch/arm/configs/cerfcube_defconfig
index d4f3f9a8cd97..7e6f7dfa3023 100644
--- a/arch/arm/configs/cerfcube_defconfig
+++ b/arch/arm/configs/cerfcube_defconfig
@@ -4,6 +4,7 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_ARCH_SA1100=y
 CONFIG_SA1100_CERF=y
 CONFIG_SA1100_CERF_FLASH_16MB=y
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="console=ttySA0,38400 root=/dev/mtdblock3 rootfstype=jffs2 rw mem=32M init=/linuxrc"
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=m
diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig
index 9264f488c49f..31f41159bef2 100644
--- a/arch/arm/configs/cm_x300_defconfig
+++ b/arch/arm/configs/cm_x300_defconfig
@@ -12,6 +12,7 @@ CONFIG_ARCH_PXA=y
 CONFIG_MACH_CM_X300=y
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="root=/dev/mtdblock5 rootfstype=ubifs console=ttyS2,38400"
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
diff --git a/arch/arm/configs/cns3420vb_defconfig b/arch/arm/configs/cns3420vb_defconfig
index 53f601bbe647..b3aab97c0728 100644
--- a/arch/arm/configs/cns3420vb_defconfig
+++ b/arch/arm/configs/cns3420vb_defconfig
@@ -12,6 +12,7 @@ CONFIG_PROFILING=y
 CONFIG_ARCH_MULTI_V6=y
 CONFIG_ARCH_CNS3XXX=y
 CONFIG_MACH_CNS3420VB=y
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="console=ttyS0,38400 mem=128M root=/dev/mmcblk0p1 ro rootwait"
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
diff --git a/arch/arm/configs/colibri_pxa270_defconfig b/arch/arm/configs/colibri_pxa270_defconfig
index ad745f5bfbb1..8357d721c69c 100644
--- a/arch/arm/configs/colibri_pxa270_defconfig
+++ b/arch/arm/configs/colibri_pxa270_defconfig
@@ -14,6 +14,7 @@ CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_ARCH_PXA=y
 CONFIG_MACH_COLIBRI=y
 CONFIG_AEABI=y
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
diff --git a/arch/arm/configs/colibri_pxa300_defconfig b/arch/arm/configs/colibri_pxa300_defconfig
index d63469284b0b..42adfefdb6dc 100644
--- a/arch/arm/configs/colibri_pxa300_defconfig
+++ b/arch/arm/configs/colibri_pxa300_defconfig
@@ -2,6 +2,7 @@
 CONFIG_ARCH_PXA=y
 CONFIG_MACH_COLIBRI300=y
 CONFIG_AEABI=y
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="console=ttyS0,115200 rw"
 CONFIG_CPU_IDLE=y
 CONFIG_FPE_NWFPE=y
diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig
index bd9b5a013040..1f137f74050f 100644
--- a/arch/arm/configs/corgi_defconfig
+++ b/arch/arm/configs/corgi_defconfig
@@ -13,6 +13,7 @@ CONFIG_MACH_POODLE=y
 CONFIG_MACH_CORGI=y
 CONFIG_MACH_SHEPHERD=y
 CONFIG_MACH_HUSKY=y
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2   debug"
 CONFIG_FPE_NWFPE=y
 CONFIG_BINFMT_AOUT=m
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index c60c39a8b95f..fc71a03a9c8c 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -14,17 +14,8 @@ CONFIG_ARCH_MULTIPLATFORM=y
 CONFIG_ARCH_MULTI_V5=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_DAVINCI=y
-CONFIG_ARCH_DAVINCI_DM644x=y
-CONFIG_ARCH_DAVINCI_DM355=y
-CONFIG_ARCH_DAVINCI_DM646x=y
 CONFIG_ARCH_DAVINCI_DA830=y
 CONFIG_ARCH_DAVINCI_DA850=y
-CONFIG_ARCH_DAVINCI_DM365=y
-CONFIG_MACH_SFFSDR=y
-CONFIG_MACH_NEUROS_OSD2=y
-CONFIG_MACH_DM355_LEOPARD=y
-CONFIG_MACH_MITYOMAPL138=y
-CONFIG_MACH_OMAPL138_HAWKBOARD=y
 CONFIG_DAVINCI_MUX_DEBUG=y
 CONFIG_DAVINCI_MUX_WARNINGS=y
 CONFIG_AEABI=y
@@ -110,7 +101,6 @@ CONFIG_KEYBOARD_XTKBD=m
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_PWM_BEEPER=m
-CONFIG_INPUT_DM355EVM=m
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_VT_CONSOLE is not set
 CONFIG_SERIAL_8250=y
@@ -138,7 +128,6 @@ CONFIG_SYSCON_REBOOT_MODE=m
 CONFIG_BATTERY_LEGO_EV3=m
 CONFIG_WATCHDOG=y
 CONFIG_DAVINCI_WATCHDOG=y
-CONFIG_MFD_DM355EVM_MSP=y
 CONFIG_TPS6507X=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig
index dd390f3b19d2..3154125321c5 100644
--- a/arch/arm/configs/ep93xx_defconfig
+++ b/arch/arm/configs/ep93xx_defconfig
@@ -8,7 +8,6 @@ CONFIG_EXPERT=y
 CONFIG_ARCH_MULTI_V4T=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_EP93XX=y
-CONFIG_MACH_ADSSPHERE=y
 CONFIG_MACH_EDB9301=y
 CONFIG_MACH_EDB9302=y
 CONFIG_MACH_EDB9302A=y
@@ -17,13 +16,6 @@ CONFIG_MACH_EDB9307A=y
 CONFIG_MACH_EDB9312=y
 CONFIG_MACH_EDB9315=y
 CONFIG_MACH_EDB9315A=y
-CONFIG_MACH_GESBC9312=y
-CONFIG_MACH_MICRO9H=y
-CONFIG_MACH_MICRO9M=y
-CONFIG_MACH_MICRO9L=y
-CONFIG_MACH_MICRO9S=y
-CONFIG_MACH_SIM_ONE=y
-CONFIG_MACH_SNAPPER_CL15=y
 CONFIG_MACH_TS72XX=y
 CONFIG_MACH_VISION_EP9307=y
 CONFIG_AEABI=y
diff --git a/arch/arm/configs/eseries_pxa_defconfig b/arch/arm/configs/eseries_pxa_defconfig
index f76432fbc3af..b4c2e6457e04 100644
--- a/arch/arm/configs/eseries_pxa_defconfig
+++ b/arch/arm/configs/eseries_pxa_defconfig
@@ -8,6 +8,7 @@ CONFIG_ARCH_PXA=y
 CONFIG_ARCH_PXA_ESERIES=y
 CONFIG_IWMMXT=y
 CONFIG_AEABI=y
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_KEXEC=y
 CONFIG_FPE_NWFPE=y
 CONFIG_MODULES=y
diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig
index 3a5eab10110f..1a41391d7367 100644
--- a/arch/arm/configs/ezx_defconfig
+++ b/arch/arm/configs/ezx_defconfig
@@ -15,6 +15,7 @@ CONFIG_EXPERT=y
 CONFIG_ARCH_PXA=y
 CONFIG_PXA_EZX=y
 CONFIG_AEABI=y
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug"
 CONFIG_KEXEC=y
 CONFIG_CPU_FREQ=y
diff --git a/arch/arm/configs/footbridge_defconfig b/arch/arm/configs/footbridge_defconfig
index 5c0c88ce9bc5..504070812ad0 100644
--- a/arch/arm/configs/footbridge_defconfig
+++ b/arch/arm/configs/footbridge_defconfig
@@ -5,7 +5,6 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 # CONFIG_HOTPLUG is not set
 CONFIG_ARCH_FOOTBRIDGE=y
-CONFIG_ARCH_CATS=y
 CONFIG_ARCH_EBSA285_HOST=y
 CONFIG_ARCH_NETWINDER=y
 CONFIG_FPE_NWFPE=y
diff --git a/arch/arm/configs/h5000_defconfig b/arch/arm/configs/h5000_defconfig
index e1af11d3e632..d01f1a6bd04d 100644
--- a/arch/arm/configs/h5000_defconfig
+++ b/arch/arm/configs/h5000_defconfig
@@ -10,6 +10,7 @@ CONFIG_EXPERT=y
 CONFIG_ARCH_PXA=y
 CONFIG_MACH_H5000=y
 CONFIG_AEABI=y
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="keepinitrd"
 CONFIG_KEXEC=y
 CONFIG_FPE_NWFPE=y
diff --git a/arch/arm/configs/hackkit_defconfig b/arch/arm/configs/hackkit_defconfig
index 19bc294c2767..b9327b2eacd3 100644
--- a/arch/arm/configs/hackkit_defconfig
+++ b/arch/arm/configs/hackkit_defconfig
@@ -3,6 +3,7 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_ARCH_SA1100=y
 CONFIG_SA1100_HACKKIT=y
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="console=ttySA0,115200 root=/dev/ram0 initrd=0xc0400000,8M init=/rootshell"
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_FPE_NWFPE=y
diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig
index 3bc51fb4ebc9..c16e92cdfd00 100644
--- a/arch/arm/configs/iop32x_defconfig
+++ b/arch/arm/configs/iop32x_defconfig
@@ -9,6 +9,7 @@ CONFIG_MACH_GLANTANK=y
 CONFIG_ARCH_IQ80321=y
 CONFIG_ARCH_IQ31244=y
 CONFIG_MACH_N2100=y
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp cachepolicy=writealloc"
 CONFIG_FPE_NWFPE=y
 CONFIG_BINFMT_AOUT=y
diff --git a/arch/arm/configs/jornada720_defconfig b/arch/arm/configs/jornada720_defconfig
index d9e2551ac31d..3dcf89d3e1f1 100644
--- a/arch/arm/configs/jornada720_defconfig
+++ b/arch/arm/configs/jornada720_defconfig
@@ -4,6 +4,7 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_ARCH_SA1100=y
 CONFIG_SA1100_JORNADA720=y
 CONFIG_SA1100_JORNADA720_SSP=y
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_FPE_NWFPE=y
 CONFIG_BINFMT_AOUT=y
 CONFIG_PM=y
diff --git a/arch/arm/configs/lart_defconfig b/arch/arm/configs/lart_defconfig
index 3dad6adabb43..0c2f19d756c0 100644
--- a/arch/arm/configs/lart_defconfig
+++ b/arch/arm/configs/lart_defconfig
@@ -3,6 +3,7 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_ARCH_SA1100=y
 CONFIG_SA1100_LART=y
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="console=ttySA0,9600 root=/dev/ram"
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
diff --git a/arch/arm/configs/lpd270_defconfig b/arch/arm/configs/lpd270_defconfig
index fb74b0fc4761..b0c21a99a0a8 100644
--- a/arch/arm/configs/lpd270_defconfig
+++ b/arch/arm/configs/lpd270_defconfig
@@ -3,6 +3,7 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_PXA=y
 CONFIG_MACH_LOGICPD_PXA270=y
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M"
 CONFIG_FPE_NWFPE=y
 CONFIG_MODULES=y
diff --git a/arch/arm/configs/lubbock_defconfig b/arch/arm/configs/lubbock_defconfig
index ca226bce5025..4fc744c96196 100644
--- a/arch/arm/configs/lubbock_defconfig
+++ b/arch/arm/configs/lubbock_defconfig
@@ -3,6 +3,7 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_PXA=y
 CONFIG_ARCH_LUBBOCK=y
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M"
 CONFIG_FPE_NWFPE=y
 CONFIG_MODULES=y
diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig
index b65cce921ecc..9cbb63c69436 100644
--- a/arch/arm/configs/magician_defconfig
+++ b/arch/arm/configs/magician_defconfig
@@ -13,6 +13,7 @@ CONFIG_ARCH_PXA=y
 CONFIG_MACH_H4700=y
 CONFIG_MACH_MAGICIAN=y
 CONFIG_AEABI=y
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="keepinitrd"
 CONFIG_KEXEC=y
 CONFIG_CPU_FREQ=y
diff --git a/arch/arm/configs/mainstone_defconfig b/arch/arm/configs/mainstone_defconfig
index dc1a88ed4de4..096cd7bc667a 100644
--- a/arch/arm/configs/mainstone_defconfig
+++ b/arch/arm/configs/mainstone_defconfig
@@ -3,6 +3,7 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_PXA=y
 CONFIG_MACH_MAINSTONE=y
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M"
 CONFIG_FPE_NWFPE=y
 CONFIG_MODULES=y
diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig
index 5b4ab5bf5c5f..86e00f684e16 100644
--- a/arch/arm/configs/mini2440_defconfig
+++ b/arch/arm/configs/mini2440_defconfig
@@ -11,6 +11,7 @@ CONFIG_S3C_ADC=y
 CONFIG_CPU_S3C2440=y
 CONFIG_MACH_MINI2440=y
 CONFIG_AEABI=y
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_KEXEC=y
 CONFIG_CPU_IDLE=y
 CONFIG_APM_EMULATION=y
diff --git a/arch/arm/configs/mmp2_defconfig b/arch/arm/configs/mmp2_defconfig
index 1b6b41a36888..4d39c615117b 100644
--- a/arch/arm/configs/mmp2_defconfig
+++ b/arch/arm/configs/mmp2_defconfig
@@ -5,10 +5,8 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_MMP=y
-CONFIG_MACH_BROWNSTONE=y
-CONFIG_MACH_FLINT=y
-CONFIG_MACH_MARVELL_JASPER=y
 CONFIG_AEABI=y
+CONFIG_MACH_MMP2_DT=y
 CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS2,38400 mem=128M user_debug=255 earlyprintk"
 CONFIG_VFP=y
 CONFIG_MODULES=y
@@ -56,6 +54,7 @@ CONFIG_BACKLIGHT_MAX8925=y
 CONFIG_MMC=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_MAX8925=y
+# CONFIG_RESET_CONTROLLER is not set
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 CONFIG_EXT4_FS=y
diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig
index c6dc1509bc77..e0be0e0023f3 100644
--- a/arch/arm/configs/multi_v5_defconfig
+++ b/arch/arm/configs/multi_v5_defconfig
@@ -12,17 +12,8 @@ CONFIG_MACH_ASPEED_G4=y
 CONFIG_ARCH_AT91=y
 CONFIG_SOC_AT91SAM9=y
 CONFIG_ARCH_DAVINCI=y
-CONFIG_ARCH_DAVINCI_DM644x=y
-CONFIG_ARCH_DAVINCI_DM355=y
-CONFIG_ARCH_DAVINCI_DM646x=y
 CONFIG_ARCH_DAVINCI_DA830=y
 CONFIG_ARCH_DAVINCI_DA850=y
-CONFIG_ARCH_DAVINCI_DM365=y
-CONFIG_MACH_SFFSDR=y
-CONFIG_MACH_NEUROS_OSD2=y
-CONFIG_MACH_DM355_LEOPARD=y
-CONFIG_MACH_MITYOMAPL138=y
-CONFIG_MACH_OMAPL138_HAWKBOARD=y
 CONFIG_ARCH_MXC=y
 CONFIG_SOC_IMX25=y
 CONFIG_SOC_IMX27=y
@@ -31,8 +22,6 @@ CONFIG_MACH_KIRKWOOD=y
 CONFIG_ARCH_NPCM=y
 CONFIG_ARCH_WPCM450=y
 CONFIG_ARCH_ORION5X=y
-CONFIG_MACH_DB88F5281=y
-CONFIG_MACH_RD88F5182=y
 CONFIG_MACH_RD88F5182_DT=y
 CONFIG_MACH_KUROBOX_PRO=y
 CONFIG_MACH_DNS323=y
@@ -40,18 +29,12 @@ CONFIG_MACH_TS209=y
 CONFIG_MACH_TERASTATION_PRO2=y
 CONFIG_MACH_LINKSTATION_PRO=y
 CONFIG_MACH_LINKSTATION_MINI=y
-CONFIG_MACH_LINKSTATION_LS_HGL=y
 CONFIG_MACH_TS409=y
-CONFIG_MACH_WRT350N_V2=y
 CONFIG_MACH_TS78XX=y
 CONFIG_MACH_MV2120=y
 CONFIG_MACH_D2NET_DT=y
 CONFIG_MACH_NET2BIG=y
 CONFIG_MACH_MSS2_DT=y
-CONFIG_MACH_WNR854T=y
-CONFIG_MACH_RD88F5181L_GE=y
-CONFIG_MACH_RD88F5181L_FXO=y
-CONFIG_MACH_RD88F6183AP_GE=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_ARCH_VERSATILE=y
 CONFIG_AEABI=y
diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig
index 89699b015396..a53ccd49f8ff 100644
--- a/arch/arm/configs/mv78xx0_defconfig
+++ b/arch/arm/configs/mv78xx0_defconfig
@@ -17,6 +17,7 @@ CONFIG_MACH_TERASTATION_WXL=y
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
 CONFIG_FPE_NWFPE=y
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_VFP=y
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
diff --git a/arch/arm/configs/mvebu_v5_defconfig b/arch/arm/configs/mvebu_v5_defconfig
index 456457fa7d16..ef3a33ebc29a 100644
--- a/arch/arm/configs/mvebu_v5_defconfig
+++ b/arch/arm/configs/mvebu_v5_defconfig
@@ -9,8 +9,6 @@ CONFIG_PROFILING=y
 CONFIG_ARCH_MVEBU=y
 CONFIG_MACH_KIRKWOOD=y
 CONFIG_ARCH_ORION5X=y
-CONFIG_MACH_DB88F5281=y
-CONFIG_MACH_RD88F5182=y
 CONFIG_MACH_RD88F5182_DT=y
 CONFIG_MACH_KUROBOX_PRO=y
 CONFIG_MACH_DNS323=y
@@ -19,18 +17,12 @@ CONFIG_MACH_TERASTATION_PRO2=y
 CONFIG_MACH_LINKSTATION_PRO=y
 CONFIG_MACH_LINKSTATION_LSCHL=y
 CONFIG_MACH_LINKSTATION_MINI=y
-CONFIG_MACH_LINKSTATION_LS_HGL=y
 CONFIG_MACH_TS409=y
-CONFIG_MACH_WRT350N_V2=y
 CONFIG_MACH_TS78XX=y
 CONFIG_MACH_MV2120=y
 CONFIG_MACH_D2NET_DT=y
 CONFIG_MACH_NET2BIG=y
 CONFIG_MACH_MSS2_DT=y
-CONFIG_MACH_WNR854T=y
-CONFIG_MACH_RD88F5181L_GE=y
-CONFIG_MACH_RD88F5181L_FXO=y
-CONFIG_MACH_RD88F6183AP_GE=y
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
 CONFIG_ARM_APPENDED_DTB=y
diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig
index 3f72d2ff7644..54a9f50122af 100644
--- a/arch/arm/configs/omap1_defconfig
+++ b/arch/arm/configs/omap1_defconfig
@@ -25,17 +25,8 @@ CONFIG_ARCH_OMAP850=y
 CONFIG_ARCH_OMAP16XX=y
 # CONFIG_OMAP_MUX is not set
 CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_MACH_OMAP_INNOVATOR=y
-CONFIG_MACH_OMAP_H2=y
-CONFIG_MACH_OMAP_H3=y
-CONFIG_MACH_HERALD=y
 CONFIG_MACH_OMAP_OSK=y
-CONFIG_MACH_OMAP_PERSEUS2=y
-CONFIG_MACH_OMAP_FSAMPLE=y
-CONFIG_MACH_VOICEBLUE=y
 CONFIG_MACH_OMAP_PALMTE=y
-CONFIG_MACH_OMAP_PALMZ71=y
-CONFIG_MACH_OMAP_PALMTT=y
 CONFIG_MACH_SX1=y
 CONFIG_MACH_NOKIA770=y
 CONFIG_MACH_AMS_DELTA=y
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index e3e97eea8cec..1311d9583fcc 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -9,9 +9,6 @@ CONFIG_ARCH_MULTI_V5=y
 # CONFIG_ARCH_MULTI_V6 is not set
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_ORION5X=y
-CONFIG_ARCH_ORION5X_DT=y
-CONFIG_MACH_DB88F5281=y
-CONFIG_MACH_RD88F5182=y
 CONFIG_MACH_RD88F5182_DT=y
 CONFIG_MACH_KUROBOX_PRO=y
 CONFIG_MACH_DNS323=y
@@ -19,20 +16,10 @@ CONFIG_MACH_TS209=y
 CONFIG_MACH_TERASTATION_PRO2=y
 CONFIG_MACH_LINKSTATION_PRO=y
 CONFIG_MACH_LINKSTATION_MINI=y
-CONFIG_MACH_LINKSTATION_LS_HGL=y
 CONFIG_MACH_TS409=y
-CONFIG_MACH_WRT350N_V2=y
 CONFIG_MACH_TS78XX=y
 CONFIG_MACH_MV2120=y
-CONFIG_MACH_EDMINI_V2_DT=y
-CONFIG_MACH_D2NET=y
-CONFIG_MACH_BIGDISK=y
 CONFIG_MACH_NET2BIG=y
-CONFIG_MACH_MSS2=y
-CONFIG_MACH_WNR854T=y
-CONFIG_MACH_RD88F5181L_GE=y
-CONFIG_MACH_RD88F5181L_FXO=y
-CONFIG_MACH_RD88F6183AP_GE=y
 CONFIG_AEABI=y
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
diff --git a/arch/arm/configs/palmz72_defconfig b/arch/arm/configs/palmz72_defconfig
index 5ceed551b972..a9a808bc2f70 100644
--- a/arch/arm/configs/palmz72_defconfig
+++ b/arch/arm/configs/palmz72_defconfig
@@ -10,6 +10,7 @@ CONFIG_ARCH_PXA=y
 CONFIG_ARCH_PXA_PALM=y
 # CONFIG_MACH_PALMTX is not set
 CONFIG_AEABI=y
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="mem=32M console=tty root=/dev/mmcblk0"
 CONFIG_FPE_NWFPE=y
 CONFIG_PM=y
diff --git a/arch/arm/configs/pcm027_defconfig b/arch/arm/configs/pcm027_defconfig
index 5215a685e082..06bc9a8fef90 100644
--- a/arch/arm/configs/pcm027_defconfig
+++ b/arch/arm/configs/pcm027_defconfig
@@ -16,6 +16,7 @@ CONFIG_MACH_PCM027=y
 CONFIG_MACH_PCM990_BASEBOARD=y
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
diff --git a/arch/arm/configs/pleb_defconfig b/arch/arm/configs/pleb_defconfig
index e109d8784b10..d87263336cb2 100644
--- a/arch/arm/configs/pleb_defconfig
+++ b/arch/arm/configs/pleb_defconfig
@@ -6,6 +6,7 @@ CONFIG_EXPERT=y
 # CONFIG_SHMEM is not set
 CONFIG_ARCH_SA1100=y
 CONFIG_SA1100_PLEB=y
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="console=ttySA0,9600 mem=16M@0xc0000000 mem=16M@0xc8000000 root=/dev/ram initrd=0xc0400000,4M"
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
diff --git a/arch/arm/configs/pxa255-idp_defconfig b/arch/arm/configs/pxa255-idp_defconfig
index d141cc786145..ae0444949a87 100644
--- a/arch/arm/configs/pxa255-idp_defconfig
+++ b/arch/arm/configs/pxa255-idp_defconfig
@@ -3,6 +3,7 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_PXA=y
 CONFIG_ARCH_PXA_IDP=y
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="root=/dev/nfs ip=dhcp console=ttyS0,115200 mem=64M"
 CONFIG_FPE_NWFPE=y
 CONFIG_MODULES=y
diff --git a/arch/arm/configs/pxa3xx_defconfig b/arch/arm/configs/pxa3xx_defconfig
index f898af656249..d1e83b52e03a 100644
--- a/arch/arm/configs/pxa3xx_defconfig
+++ b/arch/arm/configs/pxa3xx_defconfig
@@ -7,9 +7,7 @@ CONFIG_KALLSYMS_ALL=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_PXA=y
-CONFIG_MACH_LITTLETON=y
-CONFIG_MACH_TAVOREVB=y
-CONFIG_MACH_SAAR=y
+CONFIG_MACH_PXA3XX_DT=y
 CONFIG_AEABI=y
 CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=64M debug"
 CONFIG_FPE_NWFPE=y
@@ -43,8 +41,6 @@ CONFIG_SMC91X=y
 # CONFIG_KEYBOARD_ATKBD is not set
 CONFIG_KEYBOARD_GPIO=y
 CONFIG_KEYBOARD_PXA27x=y
-CONFIG_KEYBOARD_PXA930_ROTARY=y
-CONFIG_MOUSE_PXA930_TRKBALL=y
 CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_PXA=y
@@ -59,7 +55,6 @@ CONFIG_GPIO_MAX732X=y
 CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_PCF857X=y
 CONFIG_GPIO_MAX7301=y
-CONFIG_POWER_SUPPLY=y
 CONFIG_POWER_SUPPLY_DEBUG=y
 CONFIG_PDA_POWER=y
 CONFIG_BATTERY_DA9030=y
diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig
index d115f7e8aa36..104a45722799 100644
--- a/arch/arm/configs/pxa_defconfig
+++ b/arch/arm/configs/pxa_defconfig
@@ -15,57 +15,13 @@ CONFIG_EMBEDDED=y
 CONFIG_PROFILING=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_PXA=y
-CONFIG_ARCH_LUBBOCK=y
-CONFIG_MACH_MAINSTONE=y
-CONFIG_MACH_ZYLONITE300=y
-CONFIG_MACH_ZYLONITE320=y
-CONFIG_MACH_LITTLETON=y
-CONFIG_MACH_TAVOREVB=y
-CONFIG_MACH_SAAR=y
-CONFIG_ARCH_PXA_IDP=y
-CONFIG_ARCH_VIPER=y
-CONFIG_MACH_ARCOM_ZEUS=y
-CONFIG_MACH_BALLOON3=y
-CONFIG_MACH_CSB726=y
-CONFIG_CSB726_CSB701=y
-CONFIG_MACH_EXEDA=y
-CONFIG_MACH_CM_X300=y
-CONFIG_MACH_CAPC7117=y
 CONFIG_ARCH_GUMSTIX=y
-CONFIG_MACH_XCEP=y
-CONFIG_TRIZEPS_PXA=y
-CONFIG_MACH_TRIZEPS4WL=y
-CONFIG_MACH_LOGICPD_PXA270=y
-CONFIG_MACH_PCM027=y
-CONFIG_MACH_PCM990_BASEBOARD=y
-CONFIG_MACH_COLIBRI=y
-CONFIG_MACH_COLIBRI_PXA270_INCOME=y
-CONFIG_MACH_COLIBRI300=y
-CONFIG_MACH_COLIBRI320=y
-CONFIG_MACH_COLIBRI_EVALBOARD=y
-CONFIG_MACH_VPAC270=y
-CONFIG_MACH_H4700=y
-CONFIG_MACH_H5000=y
-CONFIG_MACH_HIMALAYA=y
-CONFIG_MACH_MAGICIAN=y
-CONFIG_MACH_MIOA701=y
-CONFIG_PXA_EZX=y
-CONFIG_MACH_MP900C=y
-CONFIG_ARCH_PXA_PALM=y
 CONFIG_PXA_SHARPSL=y
-CONFIG_MACH_POODLE=y
-CONFIG_MACH_CORGI=y
-CONFIG_MACH_SHEPHERD=y
-CONFIG_MACH_HUSKY=y
 CONFIG_MACH_AKITA=y
 CONFIG_MACH_BORZOI=y
-CONFIG_MACH_TOSA=y
-CONFIG_TOSA_BT=m
-CONFIG_TOSA_USE_EXT_KEYCODES=y
-CONFIG_MACH_ICONTROL=y
-CONFIG_ARCH_PXA_ESERIES=y
-CONFIG_MACH_ZIPIT2=y
+CONFIG_PXA_SYSTEMS_CPLDS=y
 CONFIG_AEABI=y
+CONFIG_FORCE_MAX_ZONEORDER=9
 CONFIG_CMDLINE="root=/dev/ram0 ro"
 CONFIG_KEXEC=y
 CONFIG_CPU_FREQ=y
@@ -148,6 +104,7 @@ CONFIG_PCMCIA_PXA2XX=m
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_CONNECTOR=y
+CONFIG_MTD=y
 CONFIG_MTD_AR7_PARTS=m
 CONFIG_MTD_CMDLINE_PARTS=m
 CONFIG_MTD_OF_PARTS=m
@@ -159,16 +116,19 @@ CONFIG_MTD_REDBOOT_PARTS_READONLY=y
 CONFIG_MTD_BLOCK=m
 CONFIG_NFTL=m
 CONFIG_NFTL_RW=y
+CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=m
 CONFIG_MTD_CFI_ADV_OPTIONS=y
 CONFIG_MTD_CFI_LE_BYTE_SWAP=y
 CONFIG_MTD_CFI_GEOMETRY=y
 CONFIG_MTD_OTP=y
+CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=m
 CONFIG_MTD_CFI_STAA=m
 CONFIG_MTD_RAM=m
 CONFIG_MTD_ROM=m
 CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PXA2XX=m
 CONFIG_MTD_M25P80=m
 CONFIG_MTD_BLOCK2MTD=y
@@ -178,7 +138,6 @@ CONFIG_MTD_ONENAND_VERIFY_WRITE=y
 CONFIG_MTD_ONENAND_GENERIC=m
 CONFIG_MTD_RAW_NAND=m
 CONFIG_MTD_NAND_SHARPSL=m
-CONFIG_MTD_NAND_MARVELL=m
 CONFIG_MTD_NAND_TMIO=m
 CONFIG_MTD_NAND_BRCMNAND=m
 CONFIG_MTD_NAND_GPIO=m
@@ -285,14 +244,12 @@ CONFIG_KEYBOARD_ATKBD=m
 CONFIG_KEYBOARD_QT1070=m
 CONFIG_KEYBOARD_GPIO=m
 CONFIG_KEYBOARD_PXA27x=m
-CONFIG_KEYBOARD_PXA930_ROTARY=m
 CONFIG_KEYBOARD_CROS_EC=m
 CONFIG_MOUSE_PS2=m
 CONFIG_MOUSE_PS2_ELANTECH=y
 CONFIG_MOUSE_SERIAL=m
 CONFIG_MOUSE_CYAPA=m
 CONFIG_MOUSE_ELAN_I2C=m
-CONFIG_MOUSE_PXA930_TRKBALL=m
 CONFIG_MOUSE_NAVPOINT_PXA27x=m
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=m
@@ -303,12 +260,9 @@ CONFIG_TOUCHSCREEN_FUJITSU=m
 CONFIG_TOUCHSCREEN_ELO=m
 CONFIG_TOUCHSCREEN_MTOUCH=m
 CONFIG_TOUCHSCREEN_INEXIO=m
-CONFIG_TOUCHSCREEN_HTCPEN=m
 CONFIG_TOUCHSCREEN_PENMOUNT=m
 CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
 CONFIG_TOUCHSCREEN_TOUCHWIN=m
-CONFIG_TOUCHSCREEN_UCB1400=m
-CONFIG_TOUCHSCREEN_WM97XX=m
 CONFIG_TOUCHSCREEN_TOUCHIT213=m
 CONFIG_TOUCHSCREEN_PCAP=m
 CONFIG_TOUCHSCREEN_ST1232=m
@@ -319,7 +273,6 @@ CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
 CONFIG_INPUT_PCAP=m
 CONFIG_INPUT_ADXL34X=m
 CONFIG_SERIO=m
-CONFIG_SERIO_SA1111=m
 CONFIG_LEGACY_PTY_COUNT=8
 CONFIG_SERIAL_8250=m
 CONFIG_SERIAL_8250_CS=m
@@ -332,6 +285,7 @@ CONFIG_I2C_CHARDEV=m
 CONFIG_I2C_MUX_PCA954x=m
 CONFIG_I2C_MUX_PINCTRL=m
 CONFIG_I2C_DESIGNWARE_PLATFORM=m
+CONFIG_I2C_GPIO=y
 CONFIG_I2C_PXA_SLAVE=y
 CONFIG_I2C_XILINX=m
 CONFIG_I2C_CROS_EC_TUNNEL=m
@@ -431,8 +385,10 @@ CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_V4L_MEM2MEM_DRIVERS=y
 CONFIG_VIDEO_PXA27x=m
 CONFIG_DRM=m
+CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_TILEBLITTING=y
+CONFIG_FB_PXA=y
 CONFIG_FB_PXA_OVERLAY=y
 CONFIG_FB_PXA_PARAMETERS=y
 CONFIG_PXA3XX_GCU=m
@@ -459,21 +415,10 @@ CONFIG_SND_USB_AUDIO=m
 CONFIG_SND_SOC=m
 CONFIG_SND_ATMEL_SOC=m
 CONFIG_SND_PXA2XX_SOC=m
-CONFIG_SND_PXA2XX_SOC_CORGI=m
+CONFIG_SND_PXA_SOC_SSP=m
 CONFIG_SND_PXA2XX_SOC_SPITZ=m
-CONFIG_SND_PXA2XX_SOC_Z2=m
-CONFIG_SND_PXA2XX_SOC_POODLE=m
-CONFIG_SND_PXA2XX_SOC_TOSA=m
-CONFIG_SND_PXA2XX_SOC_E740=m
-CONFIG_SND_PXA2XX_SOC_E750=m
-CONFIG_SND_PXA2XX_SOC_E800=m
-CONFIG_SND_PXA2XX_SOC_EM_X270=m
-CONFIG_SND_PXA2XX_SOC_PALM27X=y
-CONFIG_SND_SOC_ZYLONITE=m
-CONFIG_SND_PXA2XX_SOC_HX4700=m
-CONFIG_SND_PXA2XX_SOC_MAGICIAN=m
-CONFIG_SND_PXA2XX_SOC_MIOA701=m
 CONFIG_SND_SOC_AK4642=m
+CONFIG_SND_SOC_WM8731_I2C=m
 CONFIG_SND_SOC_WM8978=m
 CONFIG_SND_SIMPLE_CARD=m
 CONFIG_SOUND_PRIME=m
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 2789e96e4ef6..41b40863a78e 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -37,6 +37,7 @@ CONFIG_ARCH_S3C2440=y
 CONFIG_MACH_NEO1973_GTA02=y
 CONFIG_MACH_RX1950=y
 CONFIG_MACH_SMDK2443=y
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0"
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig
index 300f5a7febf0..4f04f583c738 100644
--- a/arch/arm/configs/s3c6400_defconfig
+++ b/arch/arm/configs/s3c6400_defconfig
@@ -5,15 +5,6 @@ CONFIG_KALLSYMS_ALL=y
 CONFIG_ARCH_MULTI_V6=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_S3C64XX=y
-CONFIG_MACH_SMDK6400=y
-CONFIG_MACH_ANW6410=y
-CONFIG_MACH_MINI6410=y
-CONFIG_MACH_REAL6410=y
-CONFIG_MACH_SMDK6410=y
-CONFIG_MACH_NCP=y
-CONFIG_MACH_HMT=y
-CONFIG_MACH_SMARTQ5=y
-CONFIG_MACH_SMARTQ7=y
 CONFIG_MACH_WLF_CRAGG_6410=y
 CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/ram init=/linuxrc initrd=0x51000000,6M ramdisk_size=6144"
 CONFIG_VFP=y
diff --git a/arch/arm/configs/shannon_defconfig b/arch/arm/configs/shannon_defconfig
index feaec5405576..42252e85ee49 100644
--- a/arch/arm/configs/shannon_defconfig
+++ b/arch/arm/configs/shannon_defconfig
@@ -3,6 +3,7 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_ARCH_SA1100=y
 CONFIG_SA1100_SHANNON=y
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="console=ttySA0,9600 console=tty1 root=/dev/mtdblock2 init=/linuxrc"
 CONFIG_FPE_NWFPE=y
 CONFIG_MODULES=y
diff --git a/arch/arm/configs/simpad_defconfig b/arch/arm/configs/simpad_defconfig
index 7956f0da0bf9..cc451728f6d9 100644
--- a/arch/arm/configs/simpad_defconfig
+++ b/arch/arm/configs/simpad_defconfig
@@ -7,6 +7,7 @@ CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_ARCH_SA1100=y
 CONFIG_SA1100_SIMPAD=y
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="mtdparts=sa1100:512k(boot),1m(kernel),-(root) console=ttySA0 root=1f02 noinitrd mem=64M jffs2_orphaned_inodes=delete rootfstype=jffs2"
 CONFIG_FPE_NWFPE=y
 CONFIG_MODULES=y
diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig
index ce95cc97dcac..3b29ae1fb750 100644
--- a/arch/arm/configs/tct_hammer_defconfig
+++ b/arch/arm/configs/tct_hammer_defconfig
@@ -13,6 +13,7 @@ CONFIG_ARCH_MULTI_V4T=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_S3C24XX=y
 CONFIG_MACH_TCT_HAMMER=y
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="mem=64M root=/dev/ram0 init=/linuxrc rw"
 CONFIG_FPE_NWFPE=y
 CONFIG_MODULES=y
diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig
index 01a0901120e8..009abe1e49ef 100644
--- a/arch/arm/configs/trizeps4_defconfig
+++ b/arch/arm/configs/trizeps4_defconfig
@@ -14,6 +14,7 @@ CONFIG_ARCH_PXA=y
 CONFIG_TRIZEPS_PXA=y
 CONFIG_MACH_TRIZEPS4=y
 CONFIG_AEABI=y
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="root=fe01 console=ttyS0,38400n8 loglevel=5"
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig
index 0a2ad9ec8c89..02f9849893b2 100644
--- a/arch/arm/configs/viper_defconfig
+++ b/arch/arm/configs/viper_defconfig
@@ -9,6 +9,7 @@ CONFIG_ARCH_PXA=y
 CONFIG_ARCH_VIPER=y
 CONFIG_IWMMXT=y
 CONFIG_AEABI=y
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="root=31:02 rootfstype=jffs2 ro console=ttyS0,115200"
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=m
diff --git a/arch/arm/configs/xcep_defconfig b/arch/arm/configs/xcep_defconfig
index 35b3689dc1c5..0453948d52ef 100644
--- a/arch/arm/configs/xcep_defconfig
+++ b/arch/arm/configs/xcep_defconfig
@@ -17,6 +17,7 @@ CONFIG_ARCH_PXA=y
 CONFIG_MACH_XCEP=y
 CONFIG_IWMMXT=y
 CONFIG_AEABI=y
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="root=mtd4 rootfstype=jffs2 ro console=ttyS0,115200"
 CONFIG_FPE_NWFPE=y
 CONFIG_KPROBES=y
diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig
index 37ae98a762c0..c4535315e216 100644
--- a/arch/arm/configs/zeus_defconfig
+++ b/arch/arm/configs/zeus_defconfig
@@ -5,6 +5,7 @@ CONFIG_LOG_BUF_SHIFT=13
 CONFIG_ARCH_PXA=y
 CONFIG_MACH_ARCOM_ZEUS=y
 CONFIG_AEABI=y
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="root=31:02 rootfstype=jffs2 ro console=ttyS0,115200"
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=m
diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig
index 1ecf5466931e..1f85deff2486 100644
--- a/arch/arm/mach-cns3xxx/Kconfig
+++ b/arch/arm/mach-cns3xxx/Kconfig
@@ -2,6 +2,7 @@
 menuconfig ARCH_CNS3XXX
 	bool "Cavium Networks CNS3XXX family"
 	depends on ARCH_MULTI_V6
+	depends on ATAGS && UNUSED_BOARD_FILES
 	select ARM_GIC
 	help
 	  Support for Cavium Networks CNS3XXX platform.
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index 95ca60649c34..c8cbd9a30791 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -21,12 +21,14 @@ comment "DaVinci Core Type"
 
 config ARCH_DAVINCI_DM355
 	bool "DaVinci 355 based system"
+	depends on ATAGS && UNUSED_BOARD_FILES
 	select DAVINCI_AINTC
 	select ARCH_DAVINCI_DMx
 
 config ARCH_DAVINCI_DA830
 	bool "DA830/OMAP-L137/AM17x based system"
 	depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT)
+	depends on ATAGS
 	select ARCH_DAVINCI_DA8XX
 	# needed on silicon revs 1.0, 1.1:
 	select CPU_DCACHE_WRITETHROUGH if !CPU_DCACHE_DISABLE
@@ -35,6 +37,7 @@ config ARCH_DAVINCI_DA830
 config ARCH_DAVINCI_DA850
 	bool "DA850/OMAP-L138/AM18x based system"
 	depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT)
+	depends on ATAGS
 	select ARCH_DAVINCI_DA8XX
 	select DAVINCI_CP_INTC
 
@@ -43,6 +46,7 @@ config ARCH_DAVINCI_DA8XX
 
 config ARCH_DAVINCI_DM365
 	bool "DaVinci 365 based system"
+	depends on ATAGS && UNUSED_BOARD_FILES
 	select DAVINCI_AINTC
 	select ARCH_DAVINCI_DMx
 
@@ -83,6 +87,7 @@ config MACH_DAVINCI_DM365_EVM
 config MACH_DAVINCI_DA830_EVM
 	bool "TI DA830/OMAP-L137/AM17x Reference Platform"
 	default ARCH_DAVINCI_DA830
+	depends on ATAGS && UNUSED_BOARD_FILES
 	depends on ARCH_DAVINCI_DA830
 	select GPIO_PCF857X if I2C
 	help
@@ -112,6 +117,7 @@ endchoice
 
 config MACH_DAVINCI_DA850_EVM
 	bool "TI DA850/OMAP-L138/AM18x Reference Platform"
+	depends on ATAGS && UNUSED_BOARD_FILES
 	default ARCH_DAVINCI_DA850
 	depends on ARCH_DAVINCI_DA850
 	help
@@ -153,6 +159,7 @@ endchoice
 config MACH_MITYOMAPL138
 	bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
 	depends on ARCH_DAVINCI_DA850
+	depends on ATAGS && UNUSED_BOARD_FILES
 	help
 	  Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
 	  System on Module.  Information on this SoM may be found at
@@ -161,6 +168,7 @@ config MACH_MITYOMAPL138
 config MACH_OMAPL138_HAWKBOARD
 	bool "TI AM1808 / OMAPL-138 Hawkboard platform"
 	depends on ARCH_DAVINCI_DA850
+	depends on ATAGS && UNUSED_BOARD_FILES
 	help
 	  Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform .
 
diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig
index a568ef90633e..2252f465cafd 100644
--- a/arch/arm/mach-dove/Kconfig
+++ b/arch/arm/mach-dove/Kconfig
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 menuconfig ARCH_DOVE
 	bool "Marvell Dove" if ARCH_MULTI_V7
+	depends on ATAGS
 	select CPU_PJ4
 	select GPIOLIB
 	select MVEBU_MBUS
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index 21f4cc2ba651..2c40996a444b 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 menuconfig ARCH_EP93XX
 	bool "EP93xx-based"
+	depends on ATAGS
 	depends on ARCH_MULTI_V4T
 	depends on CPU_LITTLE_ENDIAN
 	select ARCH_SPARSEMEM_ENABLE
@@ -26,6 +27,7 @@ comment "EP93xx Platforms"
 
 config MACH_ADSSPHERE
 	bool "Support ADS Sphere"
+	depends on UNUSED_BOARD_FILES
 	help
 	  Say 'Y' here if you want your kernel to support the ADS
 	  Sphere board.
@@ -98,6 +100,7 @@ config MACH_EDB9315A
 
 config MACH_GESBC9312
 	bool "Support Glomation GESBC-9312-sx"
+	depends on UNUSED_BOARD_FILES
 	help
 	  Say 'Y' here if you want your kernel to support the Glomation
 	  GESBC-9312-sx board.
@@ -108,6 +111,7 @@ config MACH_MICRO9
 config MACH_MICRO9H
 	bool "Support Contec Micro9-High"
 	select MACH_MICRO9
+	depends on UNUSED_BOARD_FILES
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Contec Micro9-High board.
@@ -115,6 +119,7 @@ config MACH_MICRO9H
 config MACH_MICRO9M
 	bool "Support Contec Micro9-Mid"
 	select MACH_MICRO9
+	depends on UNUSED_BOARD_FILES
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Contec Micro9-Mid board.
@@ -122,6 +127,7 @@ config MACH_MICRO9M
 config MACH_MICRO9L
 	bool "Support Contec Micro9-Lite"
 	select MACH_MICRO9
+	depends on UNUSED_BOARD_FILES
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Contec Micro9-Lite board.
@@ -129,18 +135,21 @@ config MACH_MICRO9L
 config MACH_MICRO9S
 	bool "Support Contec Micro9-Slim"
 	select MACH_MICRO9
+	depends on UNUSED_BOARD_FILES
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Contec Micro9-Slim board.
 
 config MACH_SIM_ONE
         bool "Support Simplemachines Sim.One board"
+	depends on UNUSED_BOARD_FILES
         help
           Say 'Y' here if you want your kernel to support the
           Simplemachines Sim.One board.
 
 config MACH_SNAPPER_CL15
 	bool "Support Bluewater Systems Snapper CL15 Module"
+	depends on UNUSED_BOARD_FILES
 	help
 	  Say 'Y' here if you want your kernel to support the Bluewater
 	  Systems Snapper CL15 Module.
diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig
index 728aff93fba9..bcd4e4ca34f7 100644
--- a/arch/arm/mach-footbridge/Kconfig
+++ b/arch/arm/mach-footbridge/Kconfig
@@ -5,6 +5,7 @@ menu "Footbridge Implementations"
 
 config ARCH_CATS
 	bool "CATS"
+	depends on UNUSED_BOARD_FILES
 	select CLKEVT_I8253
 	select CLKSRC_I8253
 	select FOOTBRIDGE_HOST
diff --git a/arch/arm/mach-iop32x/Kconfig b/arch/arm/mach-iop32x/Kconfig
index 01f60a8e6404..761fbb04faa1 100644
--- a/arch/arm/mach-iop32x/Kconfig
+++ b/arch/arm/mach-iop32x/Kconfig
@@ -3,6 +3,7 @@ menuconfig ARCH_IOP32X
 	bool "IOP32x-based platforms"
 	depends on ARCH_MULTI_V5
 	depends on CPU_LITTLE_ENDIAN
+	depends on ATAGS && UNUSED_BOARD_FILES
 	select CPU_XSCALE
 	select GPIO_IOP
 	select GPIOLIB
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index 333229c65b28..d71417d57961 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -18,6 +18,7 @@ if ATAGS
 config MACH_ASPENITE
 	bool "Marvell's PXA168 Aspenite Development Board"
 	depends on ARCH_MULTI_V5
+	depends on UNUSED_BOARD_FILES
 	select CPU_PXA168
 	help
 	  Say 'Y' here if you want to support the Marvell PXA168-based
@@ -26,6 +27,7 @@ config MACH_ASPENITE
 config MACH_ZYLONITE2
 	bool "Marvell's PXA168 Zylonite2 Development Board"
 	depends on ARCH_MULTI_V5
+	depends on UNUSED_BOARD_FILES
 	select CPU_PXA168
 	help
 	  Say 'Y' here if you want to support the Marvell PXA168-based
@@ -34,6 +36,7 @@ config MACH_ZYLONITE2
 config MACH_AVENGERS_LITE
 	bool "Marvell's PXA168 Avengers Lite Development Board"
 	depends on ARCH_MULTI_V5
+	depends on UNUSED_BOARD_FILES
 	select CPU_PXA168
 	help
 	  Say 'Y' here if you want to support the Marvell PXA168-based
@@ -42,6 +45,7 @@ config MACH_AVENGERS_LITE
 config MACH_TTC_DKB
 	bool "Marvell's PXA910 TavorEVB/TTC_DKB Development Board"
 	depends on ARCH_MULTI_V5
+	depends on UNUSED_BOARD_FILES
 	select CPU_PXA910
 	help
 	  Say 'Y' here if you want to support the Marvell PXA910-based
@@ -50,6 +54,7 @@ config MACH_TTC_DKB
 config MACH_BROWNSTONE
 	bool "Marvell's Brownstone Development Platform"
 	depends on ARCH_MULTI_V7
+	depends on UNUSED_BOARD_FILES
 	select CPU_MMP2
 	help
 	  Say 'Y' here if you want to support the Marvell MMP2-based
@@ -61,6 +66,7 @@ config MACH_BROWNSTONE
 config MACH_FLINT
 	bool "Marvell's Flint Development Platform"
 	depends on ARCH_MULTI_V7
+	depends on UNUSED_BOARD_FILES
 	select CPU_MMP2
 	help
 	  Say 'Y' here if you want to support the Marvell MMP2-based
@@ -72,6 +78,7 @@ config MACH_FLINT
 config MACH_MARVELL_JASPER
 	bool "Marvell's Jasper Development Platform"
 	depends on ARCH_MULTI_V7
+	depends on UNUSED_BOARD_FILES
 	select CPU_MMP2
 	help
 	  Say 'Y' here if you want to support the Marvell MMP2-base
@@ -83,6 +90,7 @@ config MACH_MARVELL_JASPER
 config MACH_TETON_BGA
 	bool "Marvell's PXA168 Teton BGA Development Board"
 	depends on ARCH_MULTI_V5
+	depends on UNUSED_BOARD_FILES
 	select CPU_PXA168
 	help
 	  Say 'Y' here if you want to support the Marvell PXA168-based
@@ -91,6 +99,7 @@ config MACH_TETON_BGA
 config MACH_GPLUGD
 	bool "Marvell's PXA168 GuruPlug Display (gplugD) Board"
 	depends on ARCH_MULTI_V5
+	depends on UNUSED_BOARD_FILES
 	select CPU_PXA168
 	help
 	  Say 'Y' here if you want to support the Marvell PXA168-based
diff --git a/arch/arm/mach-mv78xx0/Kconfig b/arch/arm/mach-mv78xx0/Kconfig
index f0276f0d1102..da92f94494cc 100644
--- a/arch/arm/mach-mv78xx0/Kconfig
+++ b/arch/arm/mach-mv78xx0/Kconfig
@@ -3,6 +3,7 @@ menuconfig ARCH_MV78XX0
 	bool "Marvell MV78xx0"
 	depends on ARCH_MULTI_V5
 	depends on CPU_LITTLE_ENDIAN
+	depends on ATAGS && UNUSED_BOARD_FILES
 	select CPU_FEROCEON
 	select GPIOLIB
 	select MVEBU_MBUS
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index 0ac0567f721d..538a960257cc 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -3,6 +3,7 @@ menuconfig ARCH_OMAP1
 	bool "TI OMAP1"
 	depends on ARCH_MULTI_V4T || ARCH_MULTI_V5
 	depends on CPU_LITTLE_ENDIAN
+	depends on ATAGS
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_OMAP
 	select CLKSRC_MMIO
@@ -131,6 +132,7 @@ comment "OMAP Board Type"
 config MACH_OMAP_INNOVATOR
 	bool "TI Innovator"
 	depends on ARCH_OMAP15XX || ARCH_OMAP16XX
+	depends on UNUSED_BOARD_FILES
 	help
           TI OMAP 1510 or 1610 Innovator board support. Say Y here if you
           have such a board.
@@ -138,6 +140,7 @@ config MACH_OMAP_INNOVATOR
 config MACH_OMAP_H2
 	bool "TI H2 Support"
 	depends on ARCH_OMAP16XX
+	depends on UNUSED_BOARD_FILES
 	help
 	  TI OMAP 1610/1611B H2 board support. Say Y here if you have such
 	  a board.
@@ -145,6 +148,7 @@ config MACH_OMAP_H2
 config MACH_OMAP_H3
 	bool "TI H3 Support"
 	depends on ARCH_OMAP16XX
+	depends on UNUSED_BOARD_FILES
 	help
 	  TI OMAP 1710 H3 board support. Say Y here if you have such
 	  a board.
@@ -152,6 +156,7 @@ config MACH_OMAP_H3
 config MACH_HERALD
 	bool "HTC Herald"
 	depends on ARCH_OMAP850
+	depends on UNUSED_BOARD_FILES
 	help
 	  HTC Herald smartphone support (AKA T-Mobile Wing, ...)
 
@@ -165,6 +170,7 @@ config MACH_OMAP_OSK
 config OMAP_OSK_MISTRAL
 	bool "Mistral QVGA board Support"
 	depends on MACH_OMAP_OSK
+	depends on UNUSED_BOARD_FILES
 	help
 	  The OSK supports an optional add-on board with a Quarter-VGA
 	  touchscreen, PDA-ish buttons, a resume button, bicolor LED,
@@ -173,6 +179,7 @@ config OMAP_OSK_MISTRAL
 config MACH_OMAP_PERSEUS2
 	bool "TI Perseus2"
 	depends on ARCH_OMAP730
+	depends on UNUSED_BOARD_FILES
 	help
 	  Support for TI OMAP 730 Perseus2 board. Say Y here if you have such
 	  a board.
@@ -180,6 +187,7 @@ config MACH_OMAP_PERSEUS2
 config MACH_OMAP_FSAMPLE
 	bool "TI F-Sample"
 	depends on ARCH_OMAP730
+	depends on UNUSED_BOARD_FILES
 	help
 	  Support for TI OMAP 850 F-Sample board. Say Y here if you have such
 	  a board.
@@ -196,6 +204,7 @@ config MACH_OMAP_PALMTE
 config MACH_OMAP_PALMZ71
 	bool "Palm Zire71"
 	depends on ARCH_OMAP15XX
+	depends on UNUSED_BOARD_FILES
 	help
 	 Support for the Palm Zire71 PDA. To boot the kernel,
 	 you'll need a PalmOS compatible bootloader; check out
@@ -205,6 +214,7 @@ config MACH_OMAP_PALMZ71
 config MACH_OMAP_PALMTT
 	bool "Palm Tungsten|T"
 	depends on ARCH_OMAP15XX
+	depends on UNUSED_BOARD_FILES
 	help
 	  Support for the Palm Tungsten|T PDA. To boot the kernel, you'll
 	  need a PalmOS compatible bootloader (Garux); check out
@@ -245,6 +255,7 @@ config MACH_AMS_DELTA
 config MACH_OMAP_GENERIC
 	bool "Generic OMAP board"
 	depends on ARCH_OMAP15XX || ARCH_OMAP16XX
+	depends on UNUSED_BOARD_FILES
 	help
           Support for generic OMAP-1510, 1610 or 1710 board with
           no FPGA. Can be used as template for porting Linux to
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index aeac281c8764..0044b2823710 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -31,6 +31,7 @@ config ARCH_ORION5X_DT
 config MACH_DB88F5281
 	bool "Marvell Orion-2 Development Board"
 	select I2C_BOARDINFO if I2C
+	depends on ATAGS && UNUSED_BOARD_FILES
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell Orion-2 (88F5281) Development Board
@@ -38,6 +39,7 @@ config MACH_DB88F5281
 config MACH_RD88F5182
 	bool "Marvell Orion-NAS Reference Design"
 	select I2C_BOARDINFO if I2C
+	depends on ATAGS && UNUSED_BOARD_FILES
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell Orion-NAS (88F5182) RD2
@@ -53,6 +55,7 @@ config MACH_RD88F5182_DT
 config MACH_KUROBOX_PRO
 	bool "KuroBox Pro"
 	select I2C_BOARDINFO if I2C
+	depends on ATAGS
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  KuroBox Pro platform.
@@ -60,24 +63,28 @@ config MACH_KUROBOX_PRO
 config MACH_DNS323
 	bool "D-Link DNS-323"
 	select I2C_BOARDINFO if I2C
+	depends on ATAGS
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  D-Link DNS-323 platform.
 
 config MACH_TS209
 	bool "QNAP TS-109/TS-209"
+	depends on ATAGS
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  QNAP TS-109/TS-209 platform.
 
 config MACH_TERASTATION_PRO2
 	bool "Buffalo Terastation Pro II/Live"
+	depends on ATAGS
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Buffalo Terastation Pro II/Live platform.
 
 config MACH_LINKSTATION_PRO
 	bool "Buffalo Linkstation Pro/Live"
+	depends on ATAGS
 	select I2C_BOARDINFO if I2C
 	help
 	  Say 'Y' here if you want your kernel to support the
@@ -93,6 +100,7 @@ config MACH_LINKSTATION_MINI
 
 config MACH_LINKSTATION_LS_HGL
 	bool "Buffalo Linkstation LS-HGL"
+	depends on ATAGS && UNUSED_BOARD_FILES
 	select I2C_BOARDINFO if I2C
 	help
 	  Say 'Y' here if you want your kernel to support the
@@ -100,24 +108,28 @@ config MACH_LINKSTATION_LS_HGL
 
 config MACH_TS409
 	bool "QNAP TS-409"
+	depends on ATAGS
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  QNAP TS-409 platform.
 
 config MACH_WRT350N_V2
 	bool "Linksys WRT350N v2"
+	depends on ATAGS && UNUSED_BOARD_FILES
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Linksys WRT350N v2 platform.
 
 config MACH_TS78XX
 	bool "Technologic Systems TS-78xx"
+	depends on ATAGS
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Technologic Systems TS-78xx platform.
 
 config MACH_MV2120
 	bool "HP Media Vault mv2120"
+	depends on ATAGS
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  HP Media Vault mv2120 or mv5100.
@@ -131,6 +143,7 @@ config MACH_D2NET_DT
 
 config MACH_NET2BIG
 	bool "LaCie 2Big Network"
+	depends on ATAGS
 	select I2C_BOARDINFO if I2C
 	help
 	  Say 'Y' here if you want your kernel to support the
@@ -145,24 +158,28 @@ config MACH_MSS2_DT
 
 config MACH_WNR854T
 	bool "Netgear WNR854T"
+	depends on ATAGS && UNUSED_BOARD_FILES
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Netgear WNR854T platform.
 
 config MACH_RD88F5181L_GE
 	bool "Marvell Orion-VoIP GE Reference Design"
+	depends on ATAGS && UNUSED_BOARD_FILES
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell Orion-VoIP GE (88F5181L) RD.
 
 config MACH_RD88F5181L_FXO
 	bool "Marvell Orion-VoIP FXO Reference Design"
+	depends on ATAGS && UNUSED_BOARD_FILES
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell Orion-VoIP FXO (88F5181L) RD.
 
 config MACH_RD88F6183AP_GE
 	bool "Marvell Orion-1-90 AP GE Reference Design"
+	depends on ATAGS && UNUSED_BOARD_FILES
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell Orion-1-90 (88F6183) AP GE RD.
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index a5df1d9f3360..b90d98bae68d 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -54,14 +54,18 @@ config MACH_PXA3XX_DT
 	  the device tree. Needn't select any other machine while
 	  MACH_PXA3XX_DT is enabled.
 
+if ATAGS
+
 config ARCH_LUBBOCK
 	bool "Intel DBPXA250 Development Platform (aka Lubbock)"
+	depends on UNUSED_BOARD_FILES
 	select GPIO_REG
 	select PXA25x
 	select SA1111
 
 config MACH_MAINSTONE
 	bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
+	depends on UNUSED_BOARD_FILES
 	select GPIO_REG
 	select PXA27x
 
@@ -71,23 +75,27 @@ config MACH_ZYLONITE
 
 config MACH_ZYLONITE300
 	bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
+	depends on UNUSED_BOARD_FILES
 	select CPU_PXA300
 	select CPU_PXA310
 	select MACH_ZYLONITE
 
 config MACH_ZYLONITE320
 	bool "PXA3xx Development Platform (aka Zylonite) PXA320"
+	depends on UNUSED_BOARD_FILES
 	select CPU_PXA320
 	select MACH_ZYLONITE
 
 config MACH_LITTLETON
 	bool "PXA3xx Form Factor Platform (aka Littleton)"
+	depends on UNUSED_BOARD_FILES
 	select CPU_PXA300
 	select CPU_PXA310
 	select PXA3xx
 
 config MACH_TAVOREVB
 	bool "PXA930 Evaluation Board (aka TavorEVB)"
+	depends on UNUSED_BOARD_FILES
 	select CPU_PXA930
 	select CPU_PXA935
 	select PXA3xx
@@ -96,6 +104,7 @@ config MACH_TAVOREVB
 
 config MACH_SAAR
 	bool "PXA930 Handheld Platform (aka SAAR)"
+	depends on UNUSED_BOARD_FILES
 	select CPU_PXA930
 	select CPU_PXA935
 	select PXA3xx
@@ -106,10 +115,12 @@ comment "Third Party Dev Platforms (sorted by vendor name)"
 
 config ARCH_PXA_IDP
 	bool "Accelent Xscale IDP"
+	depends on UNUSED_BOARD_FILES
 	select PXA25x
 
 config ARCH_VIPER
 	bool "Arcom/Eurotech VIPER SBC"
+	depends on UNUSED_BOARD_FILES
 	select ARCOM_PCMCIA
 	select I2C_GPIO if I2C=y
 	select ISA
@@ -117,17 +128,20 @@ config ARCH_VIPER
 
 config MACH_ARCOM_ZEUS
 	bool "Arcom/Eurotech ZEUS SBC"
+	depends on UNUSED_BOARD_FILES
 	select ARCOM_PCMCIA
 	select ISA
 	select PXA27x
 
 config MACH_BALLOON3
 	bool "Balloon 3 board"
+	depends on UNUSED_BOARD_FILES
 	select IWMMXT
 	select PXA27x
 
 config MACH_CSB726
 	bool "Enable Cogent CSB726 System On a Module"
+	depends on UNUSED_BOARD_FILES
 	select IWMMXT
 	select PXA27x
 	help
@@ -136,16 +150,19 @@ config MACH_CSB726
 
 config CSB726_CSB701
 	bool "Enable support for CSB701 baseboard"
+	depends on UNUSED_BOARD_FILES
 	depends on MACH_CSB726
 
 config MACH_CM_X300
 	bool "CompuLab CM-X300 modules"
+	depends on UNUSED_BOARD_FILES
 	select CPU_PXA300
 	select CPU_PXA310
 	select PXA3xx
 
 config MACH_CAPC7117
 	bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
+	depends on UNUSED_BOARD_FILES
 	select CPU_PXA320
 	select PXA3xx
 
@@ -170,6 +187,7 @@ endchoice
 
 config MACH_XCEP
 	bool "Iskratel Electronics XCEP"
+	depends on UNUSED_BOARD_FILES
 	select MTD
 	select MTD_CFI
 	select MTD_CFI_INTELEXT
@@ -181,6 +199,7 @@ config MACH_XCEP
 
 config TRIZEPS_PXA
 	bool "PXA based Keith und Koep Trizeps DIMM-Modules"
+	depends on UNUSED_BOARD_FILES
 
 config MACH_TRIZEPS4
 	bool "Keith und Koep Trizeps4 DIMM-Module"
@@ -222,15 +241,18 @@ config TRIZEPS_PCMCIA
 
 config MACH_LOGICPD_PXA270
 	bool "LogicPD PXA270 Card Engine Development Platform"
+	depends on UNUSED_BOARD_FILES
 	select PXA27x
 
 config MACH_PCM027
 	bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
+	depends on UNUSED_BOARD_FILES
 	select IWMMXT
 	select PXA27x
 
 config MACH_PCM990_BASEBOARD
 	bool "PHYTEC PCM-990 development board"
+	depends on UNUSED_BOARD_FILES
 	depends on MACH_PCM027
 
 choice
@@ -250,30 +272,36 @@ endchoice
 
 config MACH_COLIBRI
 	bool "Toradex Colibri PXA270"
+	depends on UNUSED_BOARD_FILES
 	select PXA27x
 
 config MACH_COLIBRI_PXA270_INCOME
 	bool "Income s.r.o. PXA270 SBC"
+	depends on UNUSED_BOARD_FILES
 	depends on MACH_COLIBRI
 	select PXA27x
 
 config MACH_COLIBRI300
 	bool "Toradex Colibri PXA300/310"
+	depends on UNUSED_BOARD_FILES
 	select CPU_PXA300
 	select CPU_PXA310
 	select PXA3xx
 
 config MACH_COLIBRI320
 	bool "Toradex Colibri PXA320"
+	depends on UNUSED_BOARD_FILES
 	select CPU_PXA320
 	select PXA3xx
 
 config MACH_COLIBRI_EVALBOARD
 	bool "Toradex Colibri Evaluation Carrier Board support"
+	depends on UNUSED_BOARD_FILES
 	depends on MACH_COLIBRI || MACH_COLIBRI300 || MACH_COLIBRI320
 
 config MACH_VPAC270
 	bool "Voipac PXA270"
+	depends on UNUSED_BOARD_FILES
 	select HAVE_PATA_PLATFORM
 	select PXA27x
 	help
@@ -283,24 +311,29 @@ comment "End-user Products (sorted by vendor name)"
 
 config MACH_H4700
 	bool "HP iPAQ hx4700"
+	depends on UNUSED_BOARD_FILES
 	select IWMMXT
 	select PXA27x
 
 config MACH_H5000
 	bool "HP iPAQ h5000"
+	depends on UNUSED_BOARD_FILES
 	select PXA25x
 
 config MACH_HIMALAYA
 	bool "HTC Himalaya Support"
+	depends on UNUSED_BOARD_FILES
 	select CPU_PXA26x
 
 config MACH_MAGICIAN
 	bool "Enable HTC Magician Support"
+	depends on UNUSED_BOARD_FILES
 	select IWMMXT
 	select PXA27x
 
 config MACH_MIOA701
 	bool "Mitac Mio A701 Support"
+	depends on UNUSED_BOARD_FILES
 	select IWMMXT
 	select PXA27x
 	help
@@ -310,6 +343,7 @@ config MACH_MIOA701
 
 config PXA_EZX
 	bool "Motorola EZX Platform"
+	depends on UNUSED_BOARD_FILES
 	select IWMMXT
 	select PXA27x
 
@@ -345,16 +379,19 @@ config MACH_EZX_E2
 
 config MACH_MP900C
 	bool "Nec Mobilepro 900/c"
+	depends on UNUSED_BOARD_FILES
 	select PXA25x
 
 config ARCH_PXA_PALM
 	bool "PXA based Palm PDAs"
+	depends on UNUSED_BOARD_FILES
 
 config MACH_PALM27X
 	bool
 
 config MACH_PALMTE2
 	bool "Palm Tungsten|E2"
+	depends on UNUSED_BOARD_FILES
 	default y
 	depends on ARCH_PXA_PALM
 	select PXA25x
@@ -373,6 +410,7 @@ config MACH_PALMTC
 
 config MACH_PALMT5
 	bool "Palm Tungsten|T5"
+	depends on UNUSED_BOARD_FILES
 	default y
 	depends on ARCH_PXA_PALM
 	select IWMMXT
@@ -384,6 +422,7 @@ config MACH_PALMT5
 
 config MACH_PALMTX
 	bool "Palm T|X"
+	depends on UNUSED_BOARD_FILES
 	default y
 	depends on ARCH_PXA_PALM
 	select IWMMXT
@@ -395,6 +434,7 @@ config MACH_PALMTX
 
 config MACH_PALMZ72
 	bool "Palm Zire 72"
+	depends on UNUSED_BOARD_FILES
 	default y
 	depends on ARCH_PXA_PALM
 	select IWMMXT
@@ -406,6 +446,7 @@ config MACH_PALMZ72
 
 config MACH_PALMLD
 	bool "Palm LifeDrive"
+	depends on UNUSED_BOARD_FILES
 	default y
 	depends on ARCH_PXA_PALM
 	select IWMMXT
@@ -421,6 +462,7 @@ config PALM_TREO
 
 config MACH_CENTRO
 	bool "Palm Centro 685 (GSM)"
+	depends on UNUSED_BOARD_FILES
 	default y
 	depends on ARCH_PXA_PALM
 	select IWMMXT
@@ -433,6 +475,7 @@ config MACH_CENTRO
 
 config MACH_TREO680
 	bool "Palm Treo 680"
+	depends on UNUSED_BOARD_FILES
 	default y
 	depends on ARCH_PXA_PALM
 	select IWMMXT
@@ -465,24 +508,28 @@ config PXA_SHARPSL_DETECT_MACH_ID
 config MACH_POODLE
 	bool "Enable Sharp SL-5600 (Poodle) Support"
 	depends on PXA_SHARPSL
+	depends on UNUSED_BOARD_FILES
 	select PXA25x
 	select SHARP_LOCOMO
 
 config MACH_CORGI
 	bool "Enable Sharp SL-C700 (Corgi) Support"
 	depends on PXA_SHARPSL
+	depends on UNUSED_BOARD_FILES
 	select PXA25x
 	select PXA_SHARP_C7xx
 
 config MACH_SHEPHERD
 	bool "Enable Sharp SL-C750 (Shepherd) Support"
 	depends on PXA_SHARPSL
+	depends on UNUSED_BOARD_FILES
 	select PXA25x
 	select PXA_SHARP_C7xx
 
 config MACH_HUSKY
 	bool "Enable Sharp SL-C760 (Husky) Support"
 	depends on PXA_SHARPSL
+	depends on UNUSED_BOARD_FILES
 	select PXA25x
 	select PXA_SHARP_C7xx
 
@@ -509,6 +556,7 @@ config MACH_BORZOI
 
 config MACH_TOSA
 	bool "Enable Sharp SL-6000x (Tosa) Support"
+	depends on UNUSED_BOARD_FILES
 	depends on PXA_SHARPSL
 	select PXA25x
 
@@ -532,11 +580,13 @@ config TOSA_USE_EXT_KEYCODES
 
 config MACH_ICONTROL
 	bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM"
+	depends on UNUSED_BOARD_FILES
 	select CPU_PXA320
 	select PXA3xx
 
 config ARCH_PXA_ESERIES
 	bool "PXA based Toshiba e-series PDAs"
+	depends on UNUSED_BOARD_FILES
 	select FB_W100
 	select FB
 	select PXA25x
@@ -591,7 +641,10 @@ config MACH_E800
 
 config MACH_ZIPIT2
 	bool "Zipit Z2 Handheld"
+	depends on UNUSED_BOARD_FILES
 	select PXA27x
+
+endif # ATAGS
 endmenu
 
 config PXA25x
diff --git a/arch/arm/mach-s3c/Kconfig.s3c24xx b/arch/arm/mach-s3c/Kconfig.s3c24xx
index ba8f4f7101de..7287e173f30e 100644
--- a/arch/arm/mach-s3c/Kconfig.s3c24xx
+++ b/arch/arm/mach-s3c/Kconfig.s3c24xx
@@ -8,7 +8,7 @@ menuconfig ARCH_S3C24XX
 	bool "Samsung S3C24XX SoCs (deprecated, see help)"
 	depends on ARCH_MULTI_V4T || ARCH_MULTI_V5
 	depends on CPU_LITTLE_ENDIAN
-	select ATAGS
+	depends on ATAGS && UNUSED_BOARD_FILES
 	select CLKSRC_SAMSUNG_PWM
 	select GPIO_SAMSUNG
 	select GPIOLIB
diff --git a/arch/arm/mach-s3c/Kconfig.s3c64xx b/arch/arm/mach-s3c/Kconfig.s3c64xx
index bfc222f5bcd9..0c1b91c3ac5f 100644
--- a/arch/arm/mach-s3c/Kconfig.s3c64xx
+++ b/arch/arm/mach-s3c/Kconfig.s3c64xx
@@ -115,7 +115,7 @@ config S3C64XX_SETUP_USB_PHY
 
 config MACH_SMDK6400
 	bool "SMDK6400"
-	depends on ATAGS
+	depends on ATAGS && UNUSED_BOARD_FILES
 	select CPU_S3C6400
 	select S3C64XX_SETUP_SDHCI
 	select S3C_DEV_HSMMC1
@@ -126,7 +126,7 @@ config MACH_SMDK6400
 
 config MACH_ANW6410
 	bool "A&W6410"
-	depends on ATAGS
+	depends on ATAGS && UNUSED_BOARD_FILES
 	select CPU_S3C6410
 	select S3C64XX_SETUP_FB_24BPP
 	select S3C_DEV_FB
@@ -135,7 +135,7 @@ config MACH_ANW6410
 
 config MACH_MINI6410
 	bool "MINI6410"
-	depends on ATAGS
+	depends on ATAGS && UNUSED_BOARD_FILES
 	select CPU_S3C6410
 	select S3C64XX_SETUP_FB_24BPP
 	select S3C64XX_SETUP_SDHCI
@@ -151,7 +151,7 @@ config MACH_MINI6410
 
 config MACH_REAL6410
 	bool "REAL6410"
-	depends on ATAGS
+	depends on ATAGS && UNUSED_BOARD_FILES
 	select CPU_S3C6410
 	select S3C64XX_SETUP_FB_24BPP
 	select S3C64XX_SETUP_SDHCI
@@ -167,7 +167,7 @@ config MACH_REAL6410
 
 config MACH_SMDK6410
 	bool "SMDK6410"
-	depends on ATAGS
+	depends on ATAGS && UNUSED_BOARD_FILES
 	select CPU_S3C6410
 	select S3C64XX_SETUP_FB_24BPP
 	select S3C64XX_SETUP_I2C1
@@ -254,7 +254,7 @@ config SMDK6410_WM1192_EV1
 
 config MACH_NCP
 	bool "NCP"
-	depends on ATAGS
+	depends on ATAGS && UNUSED_BOARD_FILES
 	select CPU_S3C6410
 	select S3C64XX_SETUP_I2C1
 	select S3C_DEV_HSMMC1
@@ -264,7 +264,7 @@ config MACH_NCP
 
 config MACH_HMT
 	bool "Airgoo HMT"
-	depends on ATAGS
+	depends on ATAGS && UNUSED_BOARD_FILES
 	select CPU_S3C6410
 	select S3C64XX_SETUP_FB_24BPP
 	select S3C_DEV_FB
@@ -296,14 +296,14 @@ config MACH_SMARTQ
 
 config MACH_SMARTQ5
 	bool "SmartQ 5"
-	depends on ATAGS
+	depends on ATAGS && UNUSED_BOARD_FILES
 	select MACH_SMARTQ
 	help
 	  Machine support for the SmartQ 5
 
 config MACH_SMARTQ7
 	bool "SmartQ 7"
-	depends on ATAGS
+	depends on ATAGS && UNUSED_BOARD_FILES
 	select MACH_SMARTQ
 	help
 	  Machine support for the SmartQ 7
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig
index 66e79fa9ba2b..7e0161cb1c1f 100644
--- a/arch/arm/mach-sa1100/Kconfig
+++ b/arch/arm/mach-sa1100/Kconfig
@@ -25,6 +25,7 @@ config ASSABET_NEPONSET
 
 config SA1100_CERF
 	bool "CerfBoard"
+	depends on UNUSED_BOARD_FILES
 	select ARM_SA1110_CPUFREQ
 	select LEDS_GPIO_REGISTER
 	help
@@ -62,6 +63,7 @@ config SA1100_COLLIE
 
 config SA1100_H3100
 	bool "Compaq iPAQ H3100"
+	depends on UNUSED_BOARD_FILES
 	select ARM_SA1110_CPUFREQ
 	select HTC_EGPIO
 	select MFD_IPAQ_MICRO
@@ -80,6 +82,7 @@ config SA1100_H3600
 
 config SA1100_BADGE4
 	bool "HP Labs BadgePAD 4"
+	depends on UNUSED_BOARD_FILES
 	select ARM_SA1100_CPUFREQ
 	select SA1111
 	help
@@ -88,6 +91,7 @@ config SA1100_BADGE4
 
 config SA1100_JORNADA720
 	bool "HP Jornada 720"
+	depends on UNUSED_BOARD_FILES
 	# FIXME: select ARM_SA11x0_CPUFREQ
 	select SA1111
 	help
@@ -107,6 +111,7 @@ config SA1100_JORNADA720_SSP
 
 config SA1100_HACKKIT
 	bool "HackKit Core CPU Board"
+	depends on UNUSED_BOARD_FILES
 	select ARM_SA1100_CPUFREQ
 	help
 	  Say Y here to support the HackKit Core CPU Board
@@ -114,6 +119,7 @@ config SA1100_HACKKIT
 
 config SA1100_LART
 	bool "LART"
+	depends on UNUSED_BOARD_FILES
 	select ARM_SA1100_CPUFREQ
 	help
 	  Say Y here if you are using the Linux Advanced Radio Terminal
@@ -122,6 +128,7 @@ config SA1100_LART
 
 config SA1100_NANOENGINE
 	bool "nanoEngine"
+	depends on UNUSED_BOARD_FILES
 	select ARM_SA1110_CPUFREQ
 	select FORCE_PCI
 	select PCI_NANOENGINE
@@ -132,6 +139,7 @@ config SA1100_NANOENGINE
 
 config SA1100_PLEB
 	bool "PLEB"
+	depends on UNUSED_BOARD_FILES
 	select ARM_SA1100_CPUFREQ
 	help
 	  Say Y here if you are using version 1 of the Portable Linux
@@ -141,6 +149,7 @@ config SA1100_PLEB
 
 config SA1100_SHANNON
 	bool "Shannon"
+	depends on UNUSED_BOARD_FILES
 	select ARM_SA1100_CPUFREQ
 	select REGULATOR
 	select REGULATOR_FIXED_VOLTAGE
@@ -152,6 +161,7 @@ config SA1100_SHANNON
 
 config SA1100_SIMPAD
 	bool "Simpad"
+	depends on UNUSED_BOARD_FILES
 	select ARM_SA1110_CPUFREQ
 	help
 	  The SIEMENS webpad SIMpad is based on the StrongARM 1110. There
@@ -163,6 +173,7 @@ config SA1100_SIMPAD
 
 config SA1100_SSP
 	tristate "Generic PIO SSP"
+	depends on UNUSED_BOARD_FILES
 	help
 	  Say Y here to enable support for the generic PIO SSP driver.
 	  This isn't for audio support, but for attached sensors and