Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree updates from Olof Johansson:
 "As always, a large number of DT updates. Too many to enumerate them
  all, but at a glance:

  New SoCs introduced in this release:

   - Amlogic:
      + Meson 8M2 SoC, a.k.a. S812. A quad Cortex-A9 SoC used in some
        set top boxes and other products.

   - Mediatek:
      + MT7623A, which is a flavor of the MT7623 family with other
        on-chip ethernet options.

   - Qualcomm:
      + SDM845, a.k.a Snapdragon 845, an 4+4-core Kryo 385/845
        (Cortex-A75/A55 derivative) SoC that's one of the current
        high-end mobile SoCs.

        It's great to see mainline support for it. So far, you can't do
        much with it, since a lot of peripherals are not yet in the DTs
        but driver support for USB, GPU and other pieces are starting to
        trickle in. This might end up being a well-supported SoC
        upstream if the momentum keeps up.

   - Renesas:
      + R8A77990, a.k.a R-Car E3, a new automotive
        entertainment-targeted SoC. Currently only one Cortex-A53 CPU is
        enabled, we are eagerly awaiting more. So far, basic drivers
        such as serial, gpios, PMU and ethernet are enabled.
      + R8A77470, a.k.a. RZ/G1C, a new dual Cortex-A7 SoC with PowerVR
        GPU. Same here, basic set of drivers such as serial, gpios and
        ethernet enabled, and SMP support is also forthcoming.

   - STMicroelectronics:
      + STM32F469, very similar tih STM32F429 but with display support

  Enhancements to SoCs/platforms (DTS contents, some driver portions
  might not be in yet):
   - Allwinner sun8i (h3/a33/a83t) SMP, DVFS tweaks, misc
   - Amlogic Meson: I2C, UFS, TDM, GPIO external interrupts, MMC resets
   - Hisilicon hi3660: Thermal cooling, CPU frequency scaling, mailbox interfaces
   - Marvell Berlin2CD: SMP support, thermal sensors
   - Mediatek MT7623: Highspeed DMA, audio support
   - Qualcomm IPQ8074 PCIe support, MSM8996 UFS support
   - Renesas: Watchdog and PMU support across many platforms
   - Rockchip RK3399: USB3 OTG support
   - Samsung Exynos: Audio-over-HDMI on Odroid X/X2/U3
   - STMicro STM32: Lots of peripherals added to STM32MP175C
   - Uniphier: Ethernet support

  New boards:
   - Allwinner A20: Olimex A20-SOM-EVB-eMMC variant
   - Allwinner H2+: Libre Computer ALL-H3-CC (h2+ version)
   - Allwinner A33: Nintendo NES/SuperNES Classic Edition
   - Aspeed: S2600WF, Inventec Lanyang BMC, Portwell Neptune
   - Berlin2CD: Valve Steam Link
   - Broadcom BCM5301X: Luxul XAP-1610 and XWR-3150 V1
   - Broadcom: Raspberry Pi 3 B+
   - Mediatek MT7623N and MT7623A: reference boards
   - Meson 8M2: Tronsmart MXIII Plus
   - NXP i.MX: Engicam i.CoreM6, DHCOM iMX6 SOM, BTicino i.MX6DL Mamoj
   - Qualcomm MSM8974: Sony Xperia Z1 Compact support
   - Qualcomm SDM845: MTP development board
   - Renesas: Ebisu R8A77990 board
   - Renesas RZ/G1C: iwg23s: iWave G235-SDB
   - TI am335x: Pocketbeagle support"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (448 commits)
  ARM: dts: aspeed: Fix hwrng register address
  arm64: dts: sprd: whale2: Add the rtc enable clock for watchdog
  arm64: dts: sprd: Add GPIO and GPIO keys device nodes
  arm64: dts: sprd: fix typo in 'remote-endpoint'
  arm64: dts: apq8096-db820c: Removed bt-en-1-8v regulator
  arm64: dts: fix regulator property name for wlan pcie endpoint
  arm64: dts: qcom: msm8996: Use UFS_GDSC for UFS
  ARM: dts: pxa3xx: fix MMC clocks
  ARM: pxa: dts: add pin definitions for extended GPIOs
  ARM: pxa: dts: add gpio-ranges to gpio controller
  ARM: dts: ipq8074: Enable few peripherals for hk01 board
  ARM: dts: ipq8074: Add pcie nodes
  ARM: dts: ipq8074: Add peripheral nodes
  ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c2 board file
  ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c1 board file
  ARM: dts: ipq4019: Add ipq4019-ap.dk07.1 common data
  ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk04.1-c3 board file
  ARM: dts: ipq4019: Add ipq4019-ap.dk04.1-c1 board file
  ARM: dts: ipq4019: Add ipq4019-ap.dk04.dtsi
  ARM: dts: ipq4019: Change the max opp frequency
  ...

10 files changed, 119 insertions, 487 deletions

diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
index cb454beede55..ea9d49f2a911 100644
--- a/arch/arm64/boot/dts/marvell/Makefile
+++ b/arch/arm64/boot/dts/marvell/Makefile
@@ -1,8 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
-# Berlin SoC Family
-dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-dmp.dtb
-dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-stb.dtb
-
 # Mvebu SoC Family
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
index ef7fd2ca2515..3ab25ad402b9 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
@@ -63,6 +63,33 @@
 	status = "okay";
 };
 
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		reg = <0>;
+		compatible = "winbond,w25q32dw", "jedec,spi-flash";
+		spi-max-frequency = <104000000>;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "uboot";
+				reg = <0 0x180000>;
+			};
+
+			partition@180000 {
+				label = "ubootenv";
+				reg = <0x180000 0x10000>;
+			};
+		};
+	};
+};
+
 /* Exported on the micro USB connector J5 through an FTDI */
 &uart0 {
 	pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index 97207a61bc79..3353252d78a0 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -148,10 +148,13 @@
 				compatible = "marvell,armada3710-nb-pinctrl",
 					     "syscon", "simple-mfd";
 				reg = <0x13800 0x100>, <0x13C00 0x20>;
+				/* MPP1[19:0] */
 				gpionb: gpio {
 					#gpio-cells = <2>;
 					gpio-ranges = <&pinctrl_nb 0 0 36>;
 					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
 					interrupts =
 					<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
@@ -209,10 +212,13 @@
 				compatible = "marvell,armada3710-sb-pinctrl",
 					     "syscon", "simple-mfd";
 				reg = <0x18800 0x100>, <0x18C00 0x20>;
+				/* MPP2[23:0] */
 				gpiosb: gpio {
 					#gpio-cells = <2>;
 					gpio-ranges = <&pinctrl_sb 0 0 30>;
 					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
 					interrupts =
 					<GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
index d6bec058a30a..412efdb46e7c 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
@@ -242,6 +242,11 @@
 	phy-mode = "10gbase-kr";
 	/* Generic PHY, providing serdes lanes */
 	phys = <&cp0_comphy2 0>;
+
+	fixed-link {
+		speed = <10000>;
+		full-duplex;
+	};
 };
 
 &cp0_eth1 {
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
index 5689fb23bbab..1bac437369a1 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
@@ -177,6 +177,11 @@
 &cp0_eth0 {
 	status = "okay";
 	phy-mode = "10gbase-kr";
+
+	fixed-link {
+		speed = <10000>;
+		full-duplex;
+	};
 };
 
 &cp0_eth2 {
@@ -303,6 +308,11 @@
 &cp1_eth0 {
 	status = "okay";
 	phy-mode = "10gbase-kr";
+
+	fixed-link {
+		speed = <10000>;
+		full-duplex;
+	};
 };
 
 &cp1_eth1 {
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
index 81de03ef860d..a66958ff4de6 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
@@ -27,6 +27,7 @@
 		ethernet0 = &cp0_eth0;
 		ethernet1 = &cp1_eth0;
 		ethernet2 = &cp1_eth1;
+		ethernet3 = &cp1_eth2;
 	};
 
 	/* Regulator labels correspond with schematics */
@@ -64,6 +65,42 @@
 		compatible = "usb-nop-xceiv";
 		vcc-supply = <&v_5v0_usb3_hst_vbus>;
 	};
+
+	sfp_eth0: sfp-eth0 {
+		/* CON15,16 - CPM lane 4 */
+		compatible = "sff,sfp";
+		i2c-bus = <&sfpp0_i2c>;
+		los-gpio = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpio  = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp1_sfpp0_pins>;
+	};
+
+	sfp_eth1: sfp-eth1 {
+		/* CON17,18 - CPS lane 4 */
+		compatible = "sff,sfp";
+		i2c-bus = <&sfpp1_i2c>;
+		los-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpio = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp1_sfpp1_pins &cp0_sfpp1_pins>;
+	};
+
+	sfp_eth3: sfp-eth3 {
+		/* CON3,4 - CPS lane 5 */
+		compatible = "sff,sfp";
+		i2c-bus = <&sfp_1g_i2c>;
+		los-gpio = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&cp0_gpio2 21 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&cp1_gpio1 24 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpio = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp0_sfp_1g_pins &cp1_sfp_1g_pins>;
+	};
 };
 
 &uart0 {
@@ -171,6 +208,10 @@
 		marvell,pins = "mpp47";
 		marvell,function = "gpio";
 	};
+	cp0_sfp_1g_pins: sfp-1g-pins {
+		marvell,pins = "mpp51", "mpp53", "mpp54";
+		marvell,function = "gpio";
+	};
 	cp0_pcie_pins: pcie-pins {
 		marvell,pins = "mpp52";
 		marvell,function = "gpio";
@@ -180,6 +221,10 @@
 			       "mpp60", "mpp61";
 		marvell,function = "sdio";
 	};
+	cp0_sfpp1_pins: sfpp1-pins {
+		marvell,pins = "mpp62";
+		marvell,function = "gpio";
+	};
 };
 
 &cp0_xmdio {
@@ -188,11 +233,13 @@
 	phy0: ethernet-phy@0 {
 		compatible = "ethernet-phy-ieee802.3-c45";
 		reg = <0>;
+		sfp = <&sfp_eth0>;
 	};
 
 	phy8: ethernet-phy@8 {
 		compatible = "ethernet-phy-ieee802.3-c45";
 		reg = <8>;
+		sfp = <&sfp_eth1>;
 	};
 };
 
@@ -257,7 +304,22 @@
 	phys = <&cp1_comphy0 1>;
 };
 
+&cp1_eth2 {
+	/* CPS Lane 5 */
+	status = "okay";
+	/* Network PHY */
+	phy-mode = "2500base-x";
+	managed = "in-band-status";
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp1_comphy5 2>;
+	sfp = <&sfp_eth3>;
+};
+
 &cp1_pinctrl {
+	cp1_sfpp1_pins: sfpp1-pins {
+		marvell,pins = "mpp8", "mpp10", "mpp11";
+		marvell,function = "gpio";
+	};
 	cp1_spi1_pins: spi1-pins {
 		marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16";
 		marvell,function = "spi1";
@@ -266,6 +328,14 @@
 		marvell,pins = "mpp6", "mpp7";
 		marvell,function = "uart0";
 	};
+	cp1_sfp_1g_pins: sfp-1g-pins {
+		marvell,pins = "mpp24";
+		marvell,function = "gpio";
+	};
+	cp1_sfpp0_pins: sfpp0-pins {
+		marvell,pins = "mpp26", "mpp27", "mpp28", "mpp29";
+		marvell,function = "gpio";
+	};
 };
 
 /* J27 UART header */
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
index ed2f1237ea1e..7dabe25f6774 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
@@ -236,6 +236,7 @@
 			compatible = "marvell,armada-8k-ahci",
 			"generic-ahci";
 			reg = <0x540000 0x30000>;
+			dma-coherent;
 			interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&CP110_LABEL(clk) 1 15>,
 				 <&CP110_LABEL(clk) 1 16>;
diff --git a/arch/arm64/boot/dts/marvell/berlin4ct-dmp.dts b/arch/arm64/boot/dts/marvell/berlin4ct-dmp.dts
deleted file mode 100644
index fae6c6924705..000000000000
--- a/arch/arm64/boot/dts/marvell/berlin4ct-dmp.dts
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * Copyright (C) 2015 Marvell Technology Group Ltd.
- *
- * Author: Jisheng Zhang <jszhang@marvell.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "berlin4ct.dtsi"
-
-/ {
-	model = "Marvell BG4CT DMP board";
-	compatible = "marvell,berlin4ct-dmp", "marvell,berlin4ct", "marvell,berlin";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@1000000 {
-		device_type = "memory";
-		/* the first 16MB is for firmwares' usage */
-		reg = <0 0x01000000 0 0x7f000000>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/arch/arm64/boot/dts/marvell/berlin4ct-stb.dts b/arch/arm64/boot/dts/marvell/berlin4ct-stb.dts
deleted file mode 100644
index d47edad13e68..000000000000
--- a/arch/arm64/boot/dts/marvell/berlin4ct-stb.dts
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * Copyright (C) 2015 Marvell Technology Group Ltd.
- *
- * Author: Jisheng Zhang <jszhang@marvell.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "berlin4ct.dtsi"
-
-/ {
-	model = "Marvell BG4CT STB board";
-	compatible = "marvell,berlin4ct-stb", "marvell,berlin4ct", "marvell,berlin";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@1000000 {
-		device_type = "memory";
-		/* the first 16MB is for firmwares' usage */
-		reg = <0 0x01000000 0 0x7f000000>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
deleted file mode 100644
index d2f88b92d8e2..000000000000
--- a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
+++ /dev/null
@@ -1,351 +0,0 @@
-/*
- * Copyright (C) 2015 Marvell Technology Group Ltd.
- *
- * Author: Jisheng Zhang <jszhang@marvell.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
-	compatible = "marvell,berlin4ct", "marvell,berlin";
-	interrupt-parent = <&gic>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	psci {
-		compatible = "arm,psci-1.0", "arm,psci-0.2";
-		method = "smc";
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			compatible = "arm,cortex-a53", "arm,armv8";
-			device_type = "cpu";
-			reg = <0x0>;
-			enable-method = "psci";
-			next-level-cache = <&l2>;
-			cpu-idle-states = <&CPU_SLEEP_0>;
-		};
-
-		cpu1: cpu@1 {
-			compatible = "arm,cortex-a53", "arm,armv8";
-			device_type = "cpu";
-			reg = <0x1>;
-			enable-method = "psci";
-			next-level-cache = <&l2>;
-			cpu-idle-states = <&CPU_SLEEP_0>;
-		};
-
-		cpu2: cpu@2 {
-			compatible = "arm,cortex-a53", "arm,armv8";
-			device_type = "cpu";
-			reg = <0x2>;
-			enable-method = "psci";
-			next-level-cache = <&l2>;
-			cpu-idle-states = <&CPU_SLEEP_0>;
-		};
-
-		cpu3: cpu@3 {
-			compatible = "arm,cortex-a53", "arm,armv8";
-			device_type = "cpu";
-			reg = <0x3>;
-			enable-method = "psci";
-			next-level-cache = <&l2>;
-			cpu-idle-states = <&CPU_SLEEP_0>;
-		};
-
-		l2: cache {
-			compatible = "cache";
-		};
-
-		idle-states {
-			entry-method = "psci";
-			CPU_SLEEP_0: cpu-sleep-0 {
-				compatible = "arm,idle-state";
-				local-timer-stop;
-				arm,psci-suspend-param = <0x0010000>;
-				entry-latency-us = <75>;
-				exit-latency-us = <155>;
-				min-residency-us = <1000>;
-			};
-		};
-	};
-
-	osc: osc {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <25000000>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a53-pmu", "arm,armv8-pmuv3";
-		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>,
-				     <&cpu1>,
-				     <&cpu2>,
-				     <&cpu3>;
-	};
-
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	soc@f7000000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0 0xf7000000 0x1000000>;
-
-		gic: interrupt-controller@901000 {
-			compatible = "arm,gic-400";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg = <0x901000 0x1000>,
-			      <0x902000 0x2000>,
-			      <0x904000 0x2000>,
-			      <0x906000 0x2000>;
-			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-		};
-
-		apb@e80000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			ranges = <0 0xe80000 0x10000>;
-			interrupt-parent = <&aic>;
-
-			gpio0: gpio@400 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x0400 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				porta: gpio-port@0 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <32>;
-					reg = <0>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					interrupts = <0>;
-				};
-			};
-
-			gpio1: gpio@800 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x0800 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				portb: gpio-port@1 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <32>;
-					reg = <0>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					interrupts = <1>;
-				};
-			};
-
-			gpio2: gpio@c00 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x0c00 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				portc: gpio-port@2 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <32>;
-					reg = <0>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					interrupts = <2>;
-				};
-			};
-
-			gpio3: gpio@1000 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x1000 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				portd: gpio-port@3 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <32>;
-					reg = <0>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					interrupts = <3>;
-				};
-			};
-
-			aic: interrupt-controller@3800 {
-				compatible = "snps,dw-apb-ictl";
-				reg = <0x3800 0x30>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		soc_pinctrl: pin-controller@ea8000 {
-			compatible = "marvell,berlin4ct-soc-pinctrl";
-			reg = <0xea8000 0x14>;
-		};
-
-		avio_pinctrl: pin-controller@ea8400 {
-			compatible = "marvell,berlin4ct-avio-pinctrl";
-			reg = <0xea8400 0x8>;
-		};
-
-		apb@fc0000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0xfc0000 0x10000>;
-			interrupt-parent = <&sic>;
-
-			sic: interrupt-controller@1000 {
-				compatible = "snps,dw-apb-ictl";
-				reg = <0x1000 0x30>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			wdt0: watchdog@3000 {
-				compatible = "snps,dw-wdt";
-				reg = <0x3000 0x100>;
-				clocks = <&osc>;
-				interrupts = <0>;
-			};
-
-			wdt1: watchdog@4000 {
-				compatible = "snps,dw-wdt";
-				reg = <0x4000 0x100>;
-				clocks = <&osc>;
-				interrupts = <1>;
-			};
-
-			wdt2: watchdog@5000 {
-				compatible = "snps,dw-wdt";
-				reg = <0x5000 0x100>;
-				clocks = <&osc>;
-				interrupts = <2>;
-			};
-
-			sm_gpio0: gpio@8000 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x8000 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				porte: gpio-port@4 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <32>;
-					reg = <0>;
-				};
-			};
-
-			sm_gpio1: gpio@9000 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x9000 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				portf: gpio-port@5 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <32>;
-					reg = <0>;
-				};
-			};
-
-			uart0: uart@d000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0xd000 0x100>;
-				interrupts = <8>;
-				clocks = <&osc>;
-				reg-shift = <2>;
-				status = "disabled";
-				pinctrl-0 = <&uart0_pmux>;
-				pinctrl-names = "default";
-			};
-		};
-
-		system_pinctrl: pin-controller@fe2200 {
-			compatible = "marvell,berlin4ct-system-pinctrl";
-			reg = <0xfe2200 0xc>;
-
-			uart0_pmux: uart0-pmux {
-				groups = "SM_URT0_TXD", "SM_URT0_RXD";
-				function = "uart0";
-			};
-		};
-	};
-};