ARM: pxa: remove platform dma code

As the last pxa related driver was converted to dmaengine, it's time to
kill the legacy dma code, which is not used anymore.

This finishes the pxa dmaengine transition.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>

1 files changed, 0 insertions, 100 deletions

diff --git a/arch/arm/plat-pxa/include/plat/dma.h b/arch/arm/plat-pxa/include/plat/dma.h
deleted file mode 100644
index ceba3e4184fc..000000000000
--- a/arch/arm/plat-pxa/include/plat/dma.h
+++ /dev/null
@@ -1,100 +0,0 @@
-#ifndef __PLAT_DMA_H
-#define __PLAT_DMA_H
-
-#define DMAC_REG(x)	(*((volatile u32 *)(DMAC_REGS_VIRT + (x))))
-
-#define DCSR(n)		DMAC_REG((n) << 2)
-#define DALGN		DMAC_REG(0x00a0)  /* DMA Alignment Register */
-#define DINT		DMAC_REG(0x00f0)  /* DMA Interrupt Register */
-#define DDADR(n)	DMAC_REG(0x0200 + ((n) << 4))
-#define DSADR(n)	DMAC_REG(0x0204 + ((n) << 4))
-#define DTADR(n)	DMAC_REG(0x0208 + ((n) << 4))
-#define DCMD(n)		DMAC_REG(0x020c + ((n) << 4))
-#define DRCMR(n)	DMAC_REG((((n) < 64) ? 0x0100 : 0x1100) + \
-				 (((n) & 0x3f) << 2))
-
-#define DCSR_RUN	(1 << 31)	/* Run Bit (read / write) */
-#define DCSR_NODESC	(1 << 30)	/* No-Descriptor Fetch (read / write) */
-#define DCSR_STOPIRQEN	(1 << 29)	/* Stop Interrupt Enable (read / write) */
-#define DCSR_REQPEND	(1 << 8)	/* Request Pending (read-only) */
-#define DCSR_STOPSTATE	(1 << 3)	/* Stop State (read-only) */
-#define DCSR_ENDINTR	(1 << 2)	/* End Interrupt (read / write) */
-#define DCSR_STARTINTR	(1 << 1)	/* Start Interrupt (read / write) */
-#define DCSR_BUSERR	(1 << 0)	/* Bus Error Interrupt (read / write) */
-
-#define DCSR_EORIRQEN	(1 << 28)       /* End of Receive Interrupt Enable (R/W) */
-#define DCSR_EORJMPEN	(1 << 27)       /* Jump to next descriptor on EOR */
-#define DCSR_EORSTOPEN	(1 << 26)       /* STOP on an EOR */
-#define DCSR_SETCMPST	(1 << 25)       /* Set Descriptor Compare Status */
-#define DCSR_CLRCMPST	(1 << 24)       /* Clear Descriptor Compare Status */
-#define DCSR_CMPST	(1 << 10)       /* The Descriptor Compare Status */
-#define DCSR_EORINTR	(1 << 9)        /* The end of Receive */
-
-#define DRCMR_MAPVLD	(1 << 7)	/* Map Valid (read / write) */
-#define DRCMR_CHLNUM	0x1f		/* mask for Channel Number (read / write) */
-
-#define DDADR_DESCADDR	0xfffffff0	/* Address of next descriptor (mask) */
-#define DDADR_STOP	(1 << 0)	/* Stop (read / write) */
-
-#define DCMD_INCSRCADDR	(1 << 31)	/* Source Address Increment Setting. */
-#define DCMD_INCTRGADDR	(1 << 30)	/* Target Address Increment Setting. */
-#define DCMD_FLOWSRC	(1 << 29)	/* Flow Control by the source. */
-#define DCMD_FLOWTRG	(1 << 28)	/* Flow Control by the target. */
-#define DCMD_STARTIRQEN	(1 << 22)	/* Start Interrupt Enable */
-#define DCMD_ENDIRQEN	(1 << 21)	/* End Interrupt Enable */
-#define DCMD_ENDIAN	(1 << 18)	/* Device Endian-ness. */
-#define DCMD_BURST8	(1 << 16)	/* 8 byte burst */
-#define DCMD_BURST16	(2 << 16)	/* 16 byte burst */
-#define DCMD_BURST32	(3 << 16)	/* 32 byte burst */
-#define DCMD_WIDTH1	(1 << 14)	/* 1 byte width */
-#define DCMD_WIDTH2	(2 << 14)	/* 2 byte width (HalfWord) */
-#define DCMD_WIDTH4	(3 << 14)	/* 4 byte width (Word) */
-#define DCMD_LENGTH	0x01fff		/* length mask (max = 8K - 1) */
-
-/*
- * Descriptor structure for PXA's DMA engine
- * Note: this structure must always be aligned to a 16-byte boundary.
- */
-
-typedef struct pxa_dma_desc {
-	volatile u32 ddadr;	/* Points to the next descriptor + flags */
-	volatile u32 dsadr;	/* DSADR value for the current transfer */
-	volatile u32 dtadr;	/* DTADR value for the current transfer */
-	volatile u32 dcmd;	/* DCMD value for the current transfer */
-} pxa_dma_desc;
-
-typedef enum {
-	DMA_PRIO_HIGH = 0,
-	DMA_PRIO_MEDIUM = 1,
-	DMA_PRIO_LOW = 2
-} pxa_dma_prio;
-
-/*
- * DMA registration
- */
-
-int __init pxa_init_dma(int irq, int num_ch);
-
-int pxa_request_dma (char *name,
-			 pxa_dma_prio prio,
-			 void (*irq_handler)(int, void *),
-			 void *data);
-
-void pxa_free_dma (int dma_ch);
-
-/*
- * Cooperation with pxa_dma + dmaengine while there remains at least one pxa
- * driver not converted to dmaengine.
- */
-#if defined(CONFIG_PXA_DMA)
-extern int pxad_toggle_reserved_channel(int legacy_channel);
-#else
-static inline int pxad_toggle_reserved_channel(int legacy_channel)
-{
-	return 0;
-}
-#endif
-
-extern void __init pxa2xx_set_dmac_info(int nb_channels, int nb_requestors);
-
-#endif /* __PLAT_DMA_H */