Merge branch 'omap-for-v3.8/cleanup-headers-gpmc' into omap-for-v3.8/cleanup-headers

Conflicts:
	arch/arm/mach-omap2/board-3430sdp.c
	arch/arm/mach-omap2/board-h4.c
	arch/arm/mach-omap2/board-rx51-peripherals.c
	arch/arm/mach-omap2/board-rx51.c
	arch/arm/mach-omap2/pm34xx.c
	drivers/mtd/nand/omap2.c
	drivers/mtd/onenand/omap2.c

1 files changed, 0 insertions, 190 deletions

diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h
deleted file mode 100644
index 2e6e2597178c..000000000000
--- a/arch/arm/plat-omap/include/plat/gpmc.h
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * General-Purpose Memory Controller for OMAP2
- *
- * Copyright (C) 2005-2006 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __OMAP2_GPMC_H
-#define __OMAP2_GPMC_H
-
-/* Maximum Number of Chip Selects */
-#define GPMC_CS_NUM		8
-
-#define GPMC_CS_CONFIG1		0x00
-#define GPMC_CS_CONFIG2		0x04
-#define GPMC_CS_CONFIG3		0x08
-#define GPMC_CS_CONFIG4		0x0c
-#define GPMC_CS_CONFIG5		0x10
-#define GPMC_CS_CONFIG6		0x14
-#define GPMC_CS_CONFIG7		0x18
-#define GPMC_CS_NAND_COMMAND	0x1c
-#define GPMC_CS_NAND_ADDRESS	0x20
-#define GPMC_CS_NAND_DATA	0x24
-
-/* Control Commands */
-#define GPMC_CONFIG_RDY_BSY	0x00000001
-#define GPMC_CONFIG_DEV_SIZE	0x00000002
-#define GPMC_CONFIG_DEV_TYPE	0x00000003
-#define GPMC_SET_IRQ_STATUS	0x00000004
-#define GPMC_CONFIG_WP		0x00000005
-
-#define GPMC_GET_IRQ_STATUS	0x00000006
-#define GPMC_PREFETCH_FIFO_CNT	0x00000007 /* bytes available in FIFO for r/w */
-#define GPMC_PREFETCH_COUNT	0x00000008 /* remaining bytes to be read/write*/
-#define GPMC_STATUS_BUFFER	0x00000009 /* 1: buffer is available to write */
-
-#define GPMC_NAND_COMMAND	0x0000000a
-#define GPMC_NAND_ADDRESS	0x0000000b
-#define GPMC_NAND_DATA		0x0000000c
-
-#define GPMC_ENABLE_IRQ		0x0000000d
-
-/* ECC commands */
-#define GPMC_ECC_READ		0 /* Reset Hardware ECC for read */
-#define GPMC_ECC_WRITE		1 /* Reset Hardware ECC for write */
-#define GPMC_ECC_READSYN	2 /* Reset before syndrom is read back */
-
-#define GPMC_CONFIG1_WRAPBURST_SUPP     (1 << 31)
-#define GPMC_CONFIG1_READMULTIPLE_SUPP  (1 << 30)
-#define GPMC_CONFIG1_READTYPE_ASYNC     (0 << 29)
-#define GPMC_CONFIG1_READTYPE_SYNC      (1 << 29)
-#define GPMC_CONFIG1_WRITEMULTIPLE_SUPP (1 << 28)
-#define GPMC_CONFIG1_WRITETYPE_ASYNC    (0 << 27)
-#define GPMC_CONFIG1_WRITETYPE_SYNC     (1 << 27)
-#define GPMC_CONFIG1_CLKACTIVATIONTIME(val) ((val & 3) << 25)
-#define GPMC_CONFIG1_PAGE_LEN(val)      ((val & 3) << 23)
-#define GPMC_CONFIG1_WAIT_READ_MON      (1 << 22)
-#define GPMC_CONFIG1_WAIT_WRITE_MON     (1 << 21)
-#define GPMC_CONFIG1_WAIT_MON_IIME(val) ((val & 3) << 18)
-#define GPMC_CONFIG1_WAIT_PIN_SEL(val)  ((val & 3) << 16)
-#define GPMC_CONFIG1_DEVICESIZE(val)    ((val & 3) << 12)
-#define GPMC_CONFIG1_DEVICESIZE_16      GPMC_CONFIG1_DEVICESIZE(1)
-#define GPMC_CONFIG1_DEVICETYPE(val)    ((val & 3) << 10)
-#define GPMC_CONFIG1_DEVICETYPE_NOR     GPMC_CONFIG1_DEVICETYPE(0)
-#define GPMC_CONFIG1_MUXADDDATA         (1 << 9)
-#define GPMC_CONFIG1_TIME_PARA_GRAN     (1 << 4)
-#define GPMC_CONFIG1_FCLK_DIV(val)      (val & 3)
-#define GPMC_CONFIG1_FCLK_DIV2          (GPMC_CONFIG1_FCLK_DIV(1))
-#define GPMC_CONFIG1_FCLK_DIV3          (GPMC_CONFIG1_FCLK_DIV(2))
-#define GPMC_CONFIG1_FCLK_DIV4          (GPMC_CONFIG1_FCLK_DIV(3))
-#define GPMC_CONFIG7_CSVALID		(1 << 6)
-
-#define GPMC_DEVICETYPE_NOR		0
-#define GPMC_DEVICETYPE_NAND		2
-#define GPMC_CONFIG_WRITEPROTECT	0x00000010
-#define GPMC_STATUS_BUFF_EMPTY		0x00000001
-#define WR_RD_PIN_MONITORING		0x00600000
-#define GPMC_PREFETCH_STATUS_FIFO_CNT(val)	((val >> 24) & 0x7F)
-#define GPMC_PREFETCH_STATUS_COUNT(val)	(val & 0x00003fff)
-#define GPMC_IRQ_FIFOEVENTENABLE	0x01
-#define GPMC_IRQ_COUNT_EVENT		0x02
-
-#define PREFETCH_FIFOTHRESHOLD_MAX	0x40
-#define PREFETCH_FIFOTHRESHOLD(val)	((val) << 8)
-
-enum omap_ecc {
-		/* 1-bit ecc: stored at end of spare area */
-	OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */
-	OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */
-		/* 1-bit ecc: stored at beginning of spare area as romcode */
-	OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */
-	OMAP_ECC_BCH4_CODE_HW, /* 4-bit BCH ecc code */
-	OMAP_ECC_BCH8_CODE_HW, /* 8-bit BCH ecc code */
-};
-
-/*
- * Note that all values in this struct are in nanoseconds except sync_clk
- * (which is in picoseconds), while the register values are in gpmc_fck cycles.
- */
-struct gpmc_timings {
-	/* Minimum clock period for synchronous mode (in picoseconds) */
-	u32 sync_clk;
-
-	/* Chip-select signal timings corresponding to GPMC_CS_CONFIG2 */
-	u16 cs_on;		/* Assertion time */
-	u16 cs_rd_off;		/* Read deassertion time */
-	u16 cs_wr_off;		/* Write deassertion time */
-
-	/* ADV signal timings corresponding to GPMC_CONFIG3 */
-	u16 adv_on;		/* Assertion time */
-	u16 adv_rd_off;		/* Read deassertion time */
-	u16 adv_wr_off;		/* Write deassertion time */
-
-	/* WE signals timings corresponding to GPMC_CONFIG4 */
-	u16 we_on;		/* WE assertion time */
-	u16 we_off;		/* WE deassertion time */
-
-	/* OE signals timings corresponding to GPMC_CONFIG4 */
-	u16 oe_on;		/* OE assertion time */
-	u16 oe_off;		/* OE deassertion time */
-
-	/* Access time and cycle time timings corresponding to GPMC_CONFIG5 */
-	u16 page_burst_access;	/* Multiple access word delay */
-	u16 access;		/* Start-cycle to first data valid delay */
-	u16 rd_cycle;		/* Total read cycle time */
-	u16 wr_cycle;		/* Total write cycle time */
-
-	/* The following are only on OMAP3430 */
-	u16 wr_access;		/* WRACCESSTIME */
-	u16 wr_data_mux_bus;	/* WRDATAONADMUXBUS */
-};
-
-struct gpmc_nand_regs {
-	void __iomem	*gpmc_status;
-	void __iomem	*gpmc_nand_command;
-	void __iomem	*gpmc_nand_address;
-	void __iomem	*gpmc_nand_data;
-	void __iomem	*gpmc_prefetch_config1;
-	void __iomem	*gpmc_prefetch_config2;
-	void __iomem	*gpmc_prefetch_control;
-	void __iomem	*gpmc_prefetch_status;
-	void __iomem	*gpmc_ecc_config;
-	void __iomem	*gpmc_ecc_control;
-	void __iomem	*gpmc_ecc_size_config;
-	void __iomem	*gpmc_ecc1_result;
-	void __iomem	*gpmc_bch_result0;
-};
-
-extern void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs);
-extern int gpmc_get_client_irq(unsigned irq_config);
-
-extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns);
-extern unsigned int gpmc_ps_to_ticks(unsigned int time_ps);
-extern unsigned int gpmc_ticks_to_ns(unsigned int ticks);
-extern unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns);
-extern unsigned long gpmc_get_fclk_period(void);
-
-extern void gpmc_cs_write_reg(int cs, int idx, u32 val);
-extern u32 gpmc_cs_read_reg(int cs, int idx);
-extern int gpmc_cs_calc_divider(int cs, unsigned int sync_clk);
-extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t);
-extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
-extern void gpmc_cs_free(int cs);
-extern int gpmc_cs_set_reserved(int cs, int reserved);
-extern int gpmc_cs_reserved(int cs);
-extern int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode,
-					unsigned int u32_count, int is_write);
-extern int gpmc_prefetch_reset(int cs);
-extern void omap3_gpmc_save_context(void);
-extern void omap3_gpmc_restore_context(void);
-extern int gpmc_read_status(int cmd);
-extern int gpmc_cs_configure(int cs, int cmd, int wval);
-extern int gpmc_nand_read(int cs, int cmd);
-extern int gpmc_nand_write(int cs, int cmd, int wval);
-
-int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size);
-int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code);
-
-#ifdef CONFIG_ARCH_OMAP3
-int gpmc_init_hwecc_bch(int cs, int nsectors, int nerrors);
-int gpmc_enable_hwecc_bch(int cs, int mode, int dev_width, int nsectors,
-			  int nerrors);
-int gpmc_calculate_ecc_bch4(int cs, const u_char *dat, u_char *ecc);
-int gpmc_calculate_ecc_bch8(int cs, const u_char *dat, u_char *ecc);
-#endif /* CONFIG_ARCH_OMAP3 */
-
-#endif