Merge branch 'next-samsung-cleanup-spi4' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into samsung/cleanup

5 files changed, 59 insertions, 170 deletions

diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 646057ab2e4c..2cdc42e838b8 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -60,6 +60,11 @@ config S5PV210_SETUP_FIMC
 	help
 	  Common setup code for the camera interfaces.
 
+config S5PV210_SETUP_SPI
+	bool
+	help
+	  Common setup code for SPI GPIO configurations.
+
 menu "S5PC110 Machines"
 
 config MACH_AQUILA
diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile
index 53c346a4cbb1..471df5d2d25c 100644
--- a/arch/arm/mach-s5pv210/Makefile
+++ b/arch/arm/mach-s5pv210/Makefile
@@ -27,7 +27,6 @@ obj-$(CONFIG_MACH_TORBRECK)	+= mach-torbreck.o
 # device support
 
 obj-y				+= dev-audio.o
-obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
 
 obj-$(CONFIG_S5PV210_SETUP_FB_24BPP)	+= setup-fb-24bpp.o
 obj-$(CONFIG_S5PV210_SETUP_FIMC)	+= setup-fimc.o
@@ -36,3 +35,4 @@ obj-$(CONFIG_S5PV210_SETUP_I2C2) 	+= setup-i2c2.o
 obj-$(CONFIG_S5PV210_SETUP_IDE)		+= setup-ide.o
 obj-$(CONFIG_S5PV210_SETUP_KEYPAD)	+= setup-keypad.o
 obj-$(CONFIG_S5PV210_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
+obj-$(CONFIG_S5PV210_SETUP_SPI)		+= setup-spi.o
diff --git a/arch/arm/mach-s5pv210/dev-spi.c b/arch/arm/mach-s5pv210/dev-spi.c
deleted file mode 100644
index 39bef19dbd68..000000000000
--- a/arch/arm/mach-s5pv210/dev-spi.c
+++ /dev/null
@@ -1,169 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/dev-spi.c
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-
-#include <mach/dma.h>
-#include <mach/map.h>
-#include <mach/irqs.h>
-#include <mach/spi-clocks.h>
-
-#include <plat/s3c64xx-spi.h>
-#include <plat/gpio-cfg.h>
-
-/* SPI Controller platform_devices */
-
-/* Since we emulate multi-cs capability, we do not touch the CS.
- * The emulated CS is toggled by board specific mechanism, as it can
- * be either some immediate GPIO or some signal out of some other
- * chip in between ... or some yet another way.
- * We simply do not assume anything about CS.
- */
-static int s5pv210_spi_cfg_gpio(struct platform_device *pdev)
-{
-	unsigned int base;
-
-	switch (pdev->id) {
-	case 0:
-		base = S5PV210_GPB(0);
-		break;
-
-	case 1:
-		base = S5PV210_GPB(4);
-		break;
-
-	default:
-		dev_err(&pdev->dev, "Invalid SPI Controller number!");
-		return -EINVAL;
-	}
-
-	s3c_gpio_cfgall_range(base, 3,
-			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-
-	return 0;
-}
-
-static struct resource s5pv210_spi0_resource[] = {
-	[0] = {
-		.start = S5PV210_PA_SPI0,
-		.end   = S5PV210_PA_SPI0 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_SPI0_TX,
-		.end   = DMACH_SPI0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_SPI0_RX,
-		.end   = DMACH_SPI0_RX,
-		.flags = IORESOURCE_DMA,
-	},
-	[3] = {
-		.start = IRQ_SPI0,
-		.end   = IRQ_SPI0,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct s3c64xx_spi_info s5pv210_spi0_pdata = {
-	.cfg_gpio = s5pv210_spi_cfg_gpio,
-	.fifo_lvl_mask = 0x1ff,
-	.rx_lvl_offset = 15,
-	.high_speed = 1,
-	.tx_st_done = 25,
-};
-
-static u64 spi_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s5pv210_device_spi0 = {
-	.name		  = "s3c64xx-spi",
-	.id		  = 0,
-	.num_resources	  = ARRAY_SIZE(s5pv210_spi0_resource),
-	.resource	  = s5pv210_spi0_resource,
-	.dev = {
-		.dma_mask		= &spi_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data = &s5pv210_spi0_pdata,
-	},
-};
-
-static struct resource s5pv210_spi1_resource[] = {
-	[0] = {
-		.start = S5PV210_PA_SPI1,
-		.end   = S5PV210_PA_SPI1 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_SPI1_TX,
-		.end   = DMACH_SPI1_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_SPI1_RX,
-		.end   = DMACH_SPI1_RX,
-		.flags = IORESOURCE_DMA,
-	},
-	[3] = {
-		.start = IRQ_SPI1,
-		.end   = IRQ_SPI1,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct s3c64xx_spi_info s5pv210_spi1_pdata = {
-	.cfg_gpio = s5pv210_spi_cfg_gpio,
-	.fifo_lvl_mask = 0x7f,
-	.rx_lvl_offset = 15,
-	.high_speed = 1,
-	.tx_st_done = 25,
-};
-
-struct platform_device s5pv210_device_spi1 = {
-	.name		  = "s3c64xx-spi",
-	.id		  = 1,
-	.num_resources	  = ARRAY_SIZE(s5pv210_spi1_resource),
-	.resource	  = s5pv210_spi1_resource,
-	.dev = {
-		.dma_mask		= &spi_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data = &s5pv210_spi1_pdata,
-	},
-};
-
-void __init s5pv210_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
-{
-	struct s3c64xx_spi_info *pd;
-
-	/* Reject invalid configuration */
-	if (!num_cs || src_clk_nr < 0
-			|| src_clk_nr > S5PV210_SPI_SRCCLK_SCLK) {
-		printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__);
-		return;
-	}
-
-	switch (cntrlr) {
-	case 0:
-		pd = &s5pv210_spi0_pdata;
-		break;
-	case 1:
-		pd = &s5pv210_spi1_pdata;
-		break;
-	default:
-		printk(KERN_ERR "%s: Invalid SPI controller(%d)\n",
-							__func__, cntrlr);
-		return;
-	}
-
-	pd->num_cs = num_cs;
-	pd->src_clk_nr = src_clk_nr;
-}
diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h
index 7ff609f1568b..89c34b8f73bf 100644
--- a/arch/arm/mach-s5pv210/include/mach/map.h
+++ b/arch/arm/mach-s5pv210/include/mach/map.h
@@ -109,6 +109,8 @@
 #define S3C_PA_RTC			S5PV210_PA_RTC
 #define S3C_PA_USB_HSOTG		S5PV210_PA_HSOTG
 #define S3C_PA_WDT			S5PV210_PA_WATCHDOG
+#define S3C_PA_SPI0			S5PV210_PA_SPI0
+#define S3C_PA_SPI1			S5PV210_PA_SPI1
 
 #define S5P_PA_CHIPID			S5PV210_PA_CHIPID
 #define S5P_PA_FIMC0			S5PV210_PA_FIMC0
diff --git a/arch/arm/mach-s5pv210/setup-spi.c b/arch/arm/mach-s5pv210/setup-spi.c
new file mode 100644
index 000000000000..f43c5048a37d
--- /dev/null
+++ b/arch/arm/mach-s5pv210/setup-spi.c
@@ -0,0 +1,51 @@
+/* linux/arch/arm/mach-s5pv210/setup-spi.c
+ *
+ * Copyright (C) 2011 Samsung Electronics Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/s3c64xx-spi.h>
+
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+struct s3c64xx_spi_info s3c64xx_spi0_pdata = {
+	.fifo_lvl_mask	= 0x1ff,
+	.rx_lvl_offset	= 15,
+	.high_speed	= 1,
+	.tx_st_done	= 25,
+};
+
+int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgpin(S5PV210_GPB(0), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PV210_GPB(0), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgall_range(S5PV210_GPB(2), 2,
+				S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_S3C64XX_DEV_SPI1
+struct s3c64xx_spi_info s3c64xx_spi1_pdata = {
+	.fifo_lvl_mask	= 0x7f,
+	.rx_lvl_offset	= 15,
+	.high_speed	= 1,
+	.tx_st_done	= 25,
+};
+
+int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgpin(S5PV210_GPB(4), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PV210_GPB(4), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgall_range(S5PV210_GPB(6), 2,
+				S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+	return 0;
+}
+#endif