Merge commit 'origin' into master

Manual merge of:

	arch/powerpc/Kconfig
	arch/powerpc/include/asm/page.h

8 files changed, 119 insertions, 28 deletions

diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index a82dad1a8cc8..df83b97f303f 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -162,7 +162,7 @@ static void __init cmx270_init_rtc(void)
 	platform_device_register(&cmx270_rtc_device);
 }
 #else
-static inline void cmx2xx_init_rtc(void) {}
+static inline void cmx270_init_rtc(void) {}
 #endif
 
 /* 2700G graphics */
diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
index d82528e74bd0..1f272ea83f36 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
@@ -335,9 +335,6 @@ static __init int pxa_cpufreq_init(struct cpufreq_policy *policy)
 		pxa27x_guess_max_freq();
 
 	/* set default policy and cpuinfo */
-	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
-	if (cpu_is_pxa25x())
-		policy->policy = CPUFREQ_POLICY_PERFORMANCE;
 	policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
 	policy->cur = get_clk_frequency_khz(0);	   /* current freq */
 	policy->min = policy->max = policy->cur;
diff --git a/arch/arm/mach-pxa/cpufreq-pxa3xx.c b/arch/arm/mach-pxa/cpufreq-pxa3xx.c
index 1ea0c9c0adaf..968c8309ec37 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa3xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa3xx.c
@@ -210,7 +210,6 @@ static __init int pxa3xx_cpufreq_init(struct cpufreq_policy *policy)
 	int ret = -EINVAL;
 
 	/* set default policy and cpuinfo */
-	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
 	policy->cpuinfo.min_freq = 104000;
 	policy->cpuinfo.max_freq = (cpu_is_pxa320()) ? 806000 : 624000;
 	policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h b/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h
index eb4b190b6657..eb35fca9aea5 100644
--- a/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h
@@ -4,6 +4,43 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 
+struct pxa3xx_nand_timing {
+	unsigned int	tCH;  /* Enable signal hold time */
+	unsigned int	tCS;  /* Enable signal setup time */
+	unsigned int	tWH;  /* ND_nWE high duration */
+	unsigned int	tWP;  /* ND_nWE pulse time */
+	unsigned int	tRH;  /* ND_nRE high duration */
+	unsigned int	tRP;  /* ND_nRE pulse width */
+	unsigned int	tR;   /* ND_nWE high to ND_nRE low for read */
+	unsigned int	tWHR; /* ND_nWE high to ND_nRE low for status read */
+	unsigned int	tAR;  /* ND_ALE low to ND_nRE low delay */
+};
+
+struct pxa3xx_nand_cmdset {
+	uint16_t	read1;
+	uint16_t	read2;
+	uint16_t	program;
+	uint16_t	read_status;
+	uint16_t	read_id;
+	uint16_t	erase;
+	uint16_t	reset;
+	uint16_t	lock;
+	uint16_t	unlock;
+	uint16_t	lock_status;
+};
+
+struct pxa3xx_nand_flash {
+	const struct pxa3xx_nand_timing *timing; /* NAND Flash timing */
+	const struct pxa3xx_nand_cmdset *cmdset;
+
+	uint32_t page_per_block;/* Pages per block (PG_PER_BLK) */
+	uint32_t page_size;	/* Page size in bytes (PAGE_SZ) */
+	uint32_t flash_width;	/* Width of Flash memory (DWIDTH_M) */
+	uint32_t dfc_width;	/* Width of flash controller(DWIDTH_C) */
+	uint32_t num_blocks;	/* Number of physical blocks in Flash */
+	uint32_t chip_id;
+};
+
 struct pxa3xx_nand_platform_data {
 
 	/* the data flash bus is shared between the Static Memory
@@ -12,8 +49,11 @@ struct pxa3xx_nand_platform_data {
 	 */
 	int	enable_arbiter;
 
-	struct mtd_partition *parts;
-	unsigned int	nr_parts;
+	const struct mtd_partition		*parts;
+	unsigned int				nr_parts;
+
+	const struct pxa3xx_nand_flash * 	flash;
+	size_t					num_flash;
 };
 
 extern void pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info);
diff --git a/arch/arm/mach-pxa/include/mach/tosa.h b/arch/arm/mach-pxa/include/mach/tosa.h
index a72803f0461b..8bce6d8615b9 100644
--- a/arch/arm/mach-pxa/include/mach/tosa.h
+++ b/arch/arm/mach-pxa/include/mach/tosa.h
@@ -59,8 +59,6 @@
  * TC6393XB GPIOs
  */
 #define TOSA_TC6393XB_GPIO_BASE		(NR_BUILTIN_GPIO + 2 * 12)
-#define TOSA_TC6393XB_GPIO(i)		(TOSA_TC6393XB_GPIO_BASE + (i))
-#define TOSA_TC6393XB_GPIO_BIT(gpio)	(1 << (gpio - TOSA_TC6393XB_GPIO_BASE))
 
 #define TOSA_GPIO_TG_ON			(TOSA_TC6393XB_GPIO_BASE + 0)
 #define TOSA_GPIO_L_MUTE		(TOSA_TC6393XB_GPIO_BASE + 1)
diff --git a/arch/arm/mach-pxa/include/mach/zylonite.h b/arch/arm/mach-pxa/include/mach/zylonite.h
index 0d35ca04731e..bf6785adccf4 100644
--- a/arch/arm/mach-pxa/include/mach/zylonite.h
+++ b/arch/arm/mach-pxa/include/mach/zylonite.h
@@ -30,7 +30,7 @@ extern void zylonite_pxa300_init(void);
 static inline void zylonite_pxa300_init(void)
 {
 	if (cpu_is_pxa300() || cpu_is_pxa310())
-		panic("%s: PXA300/PXA310 not supported\n", __FUNCTION__);
+		panic("%s: PXA300/PXA310 not supported\n", __func__);
 }
 #endif
 
@@ -40,7 +40,7 @@ extern void zylonite_pxa320_init(void);
 static inline void zylonite_pxa320_init(void)
 {
 	if (cpu_is_pxa320())
-		panic("%s: PXA320 not supported\n", __FUNCTION__);
+		panic("%s: PXA320 not supported\n", __func__);
 }
 #endif
 
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 130e37e4ebdd..a6c4694359ca 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -706,16 +706,39 @@ static struct tmio_nand_data tosa_tc6393xb_nand_config = {
 	.badblock_pattern = &tosa_tc6393xb_nand_bbt,
 };
 
-static struct tc6393xb_platform_data tosa_tc6393xb_setup = {
+static int tosa_tc6393xb_setup(struct platform_device *dev)
+{
+	int rc;
+
+	rc = gpio_request(TOSA_GPIO_CARD_VCC_ON, "CARD_VCC_ON");
+	if (rc)
+		goto err_req;
+
+	rc = gpio_direction_output(TOSA_GPIO_CARD_VCC_ON, 1);
+	if (rc)
+		goto err_dir;
+
+	return rc;
+
+err_dir:
+	gpio_free(TOSA_GPIO_CARD_VCC_ON);
+err_req:
+	return rc;
+}
+
+static void tosa_tc6393xb_teardown(struct platform_device *dev)
+{
+	gpio_free(TOSA_GPIO_CARD_VCC_ON);
+}
+
+static struct tc6393xb_platform_data tosa_tc6393xb_data = {
 	.scr_pll2cr	= 0x0cc1,
 	.scr_gper	= 0x3300,
-	.scr_gpo_dsr	=
-		TOSA_TC6393XB_GPIO_BIT(TOSA_GPIO_CARD_VCC_ON),
-	.scr_gpo_doecr	=
-		TOSA_TC6393XB_GPIO_BIT(TOSA_GPIO_CARD_VCC_ON),
 
 	.irq_base	= IRQ_BOARD_START,
 	.gpio_base	= TOSA_TC6393XB_GPIO_BASE,
+	.setup		= tosa_tc6393xb_setup,
+	.teardown	= tosa_tc6393xb_teardown,
 
 	.enable		= tosa_tc6393xb_enable,
 	.disable	= tosa_tc6393xb_disable,
@@ -723,6 +746,8 @@ static struct tc6393xb_platform_data tosa_tc6393xb_setup = {
 	.resume		= tosa_tc6393xb_resume,
 
 	.nand_data	= &tosa_tc6393xb_nand_config,
+
+	.resume_restore = 1,
 };
 
 
@@ -730,7 +755,7 @@ static struct platform_device tc6393xb_device = {
 	.name	= "tc6393xb",
 	.id	= -1,
 	.dev	= {
-		.platform_data	= &tosa_tc6393xb_setup,
+		.platform_data	= &tosa_tc6393xb_data,
 	},
 	.num_resources	= ARRAY_SIZE(tc6393xb_resources),
 	.resource	= tc6393xb_resources,
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index d7632f63603c..4b3120dbc049 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -204,25 +204,54 @@ static void viper_set_core_cpu_voltage(unsigned long khz, int force)
 
 /* Interrupt handling */
 static unsigned long viper_irq_enabled_mask;
+static const int viper_isa_irqs[] = { 3, 4, 5, 6, 7, 10, 11, 12, 9, 14, 15 };
+static const int viper_isa_irq_map[] = {
+	0,		/* ISA irq #0, invalid */
+	0,		/* ISA irq #1, invalid */
+	0,		/* ISA irq #2, invalid */
+	1 << 0,		/* ISA irq #3 */
+	1 << 1,		/* ISA irq #4 */
+	1 << 2,		/* ISA irq #5 */
+	1 << 3,		/* ISA irq #6 */
+	1 << 4,		/* ISA irq #7 */
+	0,		/* ISA irq #8, invalid */
+	1 << 8,		/* ISA irq #9 */
+	1 << 5,		/* ISA irq #10 */
+	1 << 6,		/* ISA irq #11 */
+	1 << 7,		/* ISA irq #12 */
+	0,		/* ISA irq #13, invalid */
+	1 << 9,		/* ISA irq #14 */
+	1 << 10,	/* ISA irq #15 */
+};
+
+static inline int viper_irq_to_bitmask(unsigned int irq)
+{
+	return viper_isa_irq_map[irq - PXA_ISA_IRQ(0)];
+}
+
+static inline int viper_bit_to_irq(int bit)
+{
+	return viper_isa_irqs[bit] + PXA_ISA_IRQ(0);
+}
 
 static void viper_ack_irq(unsigned int irq)
 {
-	int viper_irq = irq - PXA_ISA_IRQ(0);
+	int viper_irq = viper_irq_to_bitmask(irq);
 
-	if (viper_irq < 8)
-		VIPER_LO_IRQ_STATUS = 1 << viper_irq;
+	if (viper_irq & 0xff)
+		VIPER_LO_IRQ_STATUS = viper_irq;
 	else
-		VIPER_HI_IRQ_STATUS = 1 << (viper_irq - 8);
+		VIPER_HI_IRQ_STATUS = (viper_irq >> 8);
 }
 
 static void viper_mask_irq(unsigned int irq)
 {
-	viper_irq_enabled_mask &= ~(1 << (irq - PXA_ISA_IRQ(0)));
+	viper_irq_enabled_mask &= ~(viper_irq_to_bitmask(irq));
 }
 
 static void viper_unmask_irq(unsigned int irq)
 {
-	viper_irq_enabled_mask |= (1 << (irq - PXA_ISA_IRQ(0)));
+	viper_irq_enabled_mask |= viper_irq_to_bitmask(irq);
 }
 
 static inline unsigned long viper_irq_pending(void)
@@ -237,8 +266,12 @@ static void viper_irq_handler(unsigned int irq, struct irq_desc *desc)
 
 	pending = viper_irq_pending();
 	do {
+		/* we're in a chained irq handler,
+		 * so ack the interrupt by hand */
+		GEDR(VIPER_CPLD_GPIO) = GPIO_bit(VIPER_CPLD_GPIO);
+
 		if (likely(pending)) {
-			irq = PXA_ISA_IRQ(0) + __ffs(pending);
+			irq = viper_bit_to_irq(__ffs(pending));
 			generic_handle_irq(irq);
 		}
 		pending = viper_irq_pending();
@@ -254,15 +287,14 @@ static struct irq_chip viper_irq_chip = {
 
 static void __init viper_init_irq(void)
 {
-	const int isa_irqs[] = { 3, 4, 5, 6, 7, 10, 11, 12, 9, 14, 15 };
-	int irq;
+	int level;
 	int isa_irq;
 
 	pxa25x_init_irq();
 
 	/* setup ISA IRQs */
-	for (irq = 0; irq < ARRAY_SIZE(isa_irqs); irq++) {
-		isa_irq = isa_irqs[irq];
+	for (level = 0; level < ARRAY_SIZE(viper_isa_irqs); level++) {
+		isa_irq = viper_bit_to_irq(level);
 		set_irq_chip(isa_irq, &viper_irq_chip);
 		set_irq_handler(isa_irq, handle_edge_irq);
 		set_irq_flags(isa_irq, IRQF_VALID | IRQF_PROBE);