Merge commit 'origin/master' into next

Manual merge of:
	arch/powerpc/include/asm/elf.h
	drivers/i2c/busses/i2c-mpc.c

1 files changed, 556 insertions, 51 deletions

diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index f5ed8038ede5..920dfb8d36da 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -11,40 +11,63 @@
 
 #include <linux/irq.h>
 #include <linux/platform_device.h>
+#include <linux/delay.h>
 
 #include <linux/dm9000.h>
 #include <linux/rtc-v3020.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
 #include <linux/gpio.h>
+#include <linux/mfd/da903x.h>
+#include <linux/regulator/machine.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/tdo24m.h>
+#include <linux/power_supply.h>
+#include <linux/apm-emulation.h>
+
+#include <media/soc_camera.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/mfp-pxa27x.h>
-#include <mach/pxa-regs.h>
+#include <mach/pxa27x.h>
 #include <mach/pxa27x-udc.h>
 #include <mach/audio.h>
 #include <mach/pxafb.h>
 #include <mach/ohci.h>
 #include <mach/mmc.h>
 #include <mach/pxa27x_keypad.h>
+#include <mach/i2c.h>
+#include <mach/camera.h>
+#include <mach/pxa2xx_spi.h>
 
 #include "generic.h"
+#include "devices.h"
 
-/* GPIO IRQ usage */
-#define GPIO41_ETHIRQ		(41)
+/* EM-X270 specific GPIOs */
 #define GPIO13_MMC_CD		(13)
+#define GPIO95_MMC_WP		(95)
+#define GPIO56_NAND_RB		(56)
+
+/* eXeda specific GPIOs */
+#define GPIO114_MMC_CD		(114)
+#define GPIO20_NAND_RB		(20)
+#define GPIO38_SD_PWEN		(38)
+
+/* common  GPIOs */
+#define GPIO11_NAND_CS		(11)
+#define GPIO93_CAM_RESET	(93)
+#define GPIO41_ETHIRQ		(41)
 #define EM_X270_ETHIRQ		IRQ_GPIO(GPIO41_ETHIRQ)
-#define EM_X270_MMC_CD		IRQ_GPIO(GPIO13_MMC_CD)
 
-/* NAND control GPIOs */
-#define GPIO11_NAND_CS	(11)
-#define GPIO56_NAND_RB	(56)
+static int mmc_cd;
+static int nand_rb;
+static int dm9000_flags;
 
-static unsigned long em_x270_pin_config[] = {
+static unsigned long common_pin_config[] = {
 	/* AC'97 */
 	GPIO28_AC97_BITCLK,
 	GPIO29_AC97_SDATA_IN_0,
@@ -150,21 +173,32 @@ static unsigned long em_x270_pin_config[] = {
 	GPIO18_RDY,
 
 	/* GPIO */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,	/* sleep/resume button */
 
 	/* power controls */
 	GPIO20_GPIO	| MFP_LPM_DRIVE_LOW,	/* GPRS_PWEN */
+	GPIO93_GPIO	| MFP_LPM_DRIVE_LOW,	/* Camera reset */
 	GPIO115_GPIO	| MFP_LPM_DRIVE_LOW,	/* WLAN_PWEN */
 
 	/* NAND controls */
 	GPIO11_GPIO	| MFP_LPM_DRIVE_HIGH,	/* NAND CE# */
-	GPIO56_GPIO,				/* NAND Ready/Busy */
 
 	/* interrupts */
-	GPIO13_GPIO,	/* MMC card detect */
 	GPIO41_GPIO,	/* DM9000 interrupt */
 };
 
+static unsigned long em_x270_pin_config[] = {
+	GPIO13_GPIO,	/* MMC card detect */
+	GPIO56_GPIO,	/* NAND Ready/Busy */
+	GPIO95_GPIO,	/* MMC Write protect */
+};
+
+static unsigned long exeda_pin_config[] = {
+	GPIO20_GPIO,				/* NAND Ready/Busy */
+	GPIO38_GPIO	| MFP_LPM_DRIVE_LOW,	/* SD slot power */
+	GPIO114_GPIO,				/* MMC card detect */
+};
+
 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
 static struct resource em_x270_dm9000_resource[] = {
 	[0] = {
@@ -185,7 +219,7 @@ static struct resource em_x270_dm9000_resource[] = {
 };
 
 static struct dm9000_plat_data em_x270_dm9000_platdata = {
-	.flags		= DM9000_PLATF_32BITONLY,
+	.flags		= DM9000_PLATF_NO_EEPROM,
 };
 
 static struct platform_device em_x270_dm9000 = {
@@ -200,6 +234,7 @@ static struct platform_device em_x270_dm9000 = {
 
 static void __init em_x270_init_dm9000(void)
 {
+	em_x270_dm9000_platdata.flags |= dm9000_flags;
 	platform_device_register(&em_x270_dm9000);
 }
 #else
@@ -289,7 +324,7 @@ static int em_x270_nand_device_ready(struct mtd_info *mtd)
 {
 	dsb();
 
-	return gpio_get_value(GPIO56_NAND_RB);
+	return gpio_get_value(nand_rb);
 }
 
 static struct mtd_partition em_x270_partition_info[] = {
@@ -354,14 +389,14 @@ static void __init em_x270_init_nand(void)
 
 	gpio_direction_output(GPIO11_NAND_CS, 1);
 
-	err = gpio_request(GPIO56_NAND_RB, "NAND R/B");
+	err = gpio_request(nand_rb, "NAND R/B");
 	if (err) {
 		pr_warning("EM-X270: failed to request NAND R/B gpio\n");
 		gpio_free(GPIO11_NAND_CS);
 		return;
 	}
 
-	gpio_direction_input(GPIO56_NAND_RB);
+	gpio_direction_input(nand_rb);
 
 	platform_device_register(&em_x270_nand);
 }
@@ -369,6 +404,61 @@ static void __init em_x270_init_nand(void)
 static inline void em_x270_init_nand(void) {}
 #endif
 
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition em_x270_nor_parts[] = {
+	{
+		.name =		"Bootloader",
+		.offset =	0x00000000,
+		.size =		0x00050000,
+		.mask_flags =	MTD_WRITEABLE  /* force read-only */
+	}, {
+		.name =		"Environment",
+		.offset =	0x00050000,
+		.size =		0x00010000,
+	}, {
+		.name =		"Reserved",
+		.offset =	0x00060000,
+		.size =		0x00050000,
+		.mask_flags =	MTD_WRITEABLE  /* force read-only */
+	}, {
+		.name =		"Splashscreen",
+		.offset =	0x000b0000,
+		.size =		0x00050000,
+	}
+};
+
+static struct physmap_flash_data em_x270_nor_data[] = {
+	[0] = {
+		.width = 2,
+		.parts = em_x270_nor_parts,
+		.nr_parts = ARRAY_SIZE(em_x270_nor_parts),
+	},
+};
+
+static struct resource em_x270_nor_flash_resource = {
+	.start	= PXA_CS0_PHYS,
+	.end	= PXA_CS0_PHYS + SZ_1M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device em_x270_physmap_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.num_resources	= 1,
+	.resource	= &em_x270_nor_flash_resource,
+	.dev		= {
+		.platform_data	= &em_x270_nor_data,
+	},
+};
+
+static void __init em_x270_init_nor(void)
+{
+	platform_device_register(&em_x270_physmap_flash);
+}
+#else
+static inline void em_x270_init_nor(void) {}
+#endif
+
 /* PXA27x OHCI controller setup */
 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 static int em_x270_ohci_init(struct device *dev)
@@ -395,40 +485,93 @@ static inline void em_x270_init_ohci(void) {}
 
 /* MCI controller setup */
 #if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
+static struct regulator *em_x270_sdio_ldo;
+
 static int em_x270_mci_init(struct device *dev,
 			    irq_handler_t em_x270_detect_int,
 			    void *data)
 {
-	int err = request_irq(EM_X270_MMC_CD, em_x270_detect_int,
-			      IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+	int err;
+
+	em_x270_sdio_ldo = regulator_get(dev, "vcc sdio");
+	if (IS_ERR(em_x270_sdio_ldo)) {
+		dev_err(dev, "can't request SDIO power supply: %ld\n",
+			PTR_ERR(em_x270_sdio_ldo));
+		return PTR_ERR(em_x270_sdio_ldo);
+	}
+
+	err = request_irq(gpio_to_irq(mmc_cd), em_x270_detect_int,
+			      IRQF_DISABLED | IRQF_TRIGGER_RISING |
+			      IRQF_TRIGGER_FALLING,
 			      "MMC card detect", data);
 	if (err) {
-		printk(KERN_ERR "%s: can't request MMC card detect IRQ: %d\n",
-		       __func__, err);
-		return err;
+		dev_err(dev, "can't request MMC card detect IRQ: %d\n", err);
+		goto err_irq;
+	}
+
+	if (machine_is_em_x270()) {
+		err = gpio_request(GPIO95_MMC_WP, "MMC WP");
+		if (err) {
+			dev_err(dev, "can't request MMC write protect: %d\n",
+				err);
+			goto err_gpio_wp;
+		}
+		gpio_direction_input(GPIO95_MMC_WP);
+	} else {
+		err = gpio_request(GPIO38_SD_PWEN, "sdio power");
+		if (err) {
+			dev_err(dev, "can't request MMC power control : %d\n",
+				err);
+			goto err_gpio_wp;
+		}
+		gpio_direction_output(GPIO38_SD_PWEN, 1);
 	}
 
 	return 0;
+
+err_gpio_wp:
+	free_irq(gpio_to_irq(mmc_cd), data);
+err_irq:
+	regulator_put(em_x270_sdio_ldo);
+
+	return err;
 }
 
 static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
 {
-	/*
-	   FIXME: current hardware implementation does not allow to
-	   enable/disable MMC power. This will be fixed in next HW releases,
-	   and we'll need to add implmentation here.
-	*/
-	return;
+	struct pxamci_platform_data* p_d = dev->platform_data;
+
+	if ((1 << vdd) & p_d->ocr_mask) {
+		int vdd_uV = (2000 + (vdd - __ffs(MMC_VDD_20_21)) * 100) * 1000;
+
+		regulator_set_voltage(em_x270_sdio_ldo, vdd_uV, vdd_uV);
+		regulator_enable(em_x270_sdio_ldo);
+	} else {
+		regulator_disable(em_x270_sdio_ldo);
+	}
 }
 
 static void em_x270_mci_exit(struct device *dev, void *data)
 {
-	int irq = gpio_to_irq(GPIO13_MMC_CD);
-	free_irq(irq, data);
+	free_irq(gpio_to_irq(mmc_cd), data);
+	regulator_put(em_x270_sdio_ldo);
+
+	if (machine_is_em_x270())
+		gpio_free(GPIO95_MMC_WP);
+	else
+		gpio_free(GPIO38_SD_PWEN);
+}
+
+static int em_x270_mci_get_ro(struct device *dev)
+{
+	return gpio_get_value(GPIO95_MMC_WP);
 }
 
 static struct pxamci_platform_data em_x270_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31,
+	.ocr_mask	= MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23|
+			  MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27|
+			  MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30|
+			  MMC_VDD_30_31|MMC_VDD_31_32,
 	.init 		= em_x270_mci_init,
 	.setpower 	= em_x270_mci_setpower,
 	.exit		= em_x270_mci_exit,
@@ -436,33 +579,53 @@ static struct pxamci_platform_data em_x270_mci_platform_data = {
 
 static void __init em_x270_init_mmc(void)
 {
+	if (machine_is_em_x270())
+		em_x270_mci_platform_data.get_ro = em_x270_mci_get_ro;
+
+	em_x270_mci_platform_data.detect_delay	= msecs_to_jiffies(250);
 	pxa_set_mci_info(&em_x270_mci_platform_data);
 }
 #else
 static inline void em_x270_init_mmc(void) {}
 #endif
 
-/* LCD 480x640 */
+/* LCD */
 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct pxafb_mode_info em_x270_lcd_mode = {
-	.pixclock	= 50000,
-	.bpp		= 16,
-	.xres		= 480,
-	.yres		= 640,
-	.hsync_len	= 8,
-	.vsync_len	= 2,
-	.left_margin	= 8,
-	.upper_margin	= 0,
-	.right_margin	= 24,
-	.lower_margin	= 4,
-	.cmap_greyscale	= 0,
+static struct pxafb_mode_info em_x270_lcd_modes[] = {
+	[0] = {
+		.pixclock	= 38250,
+		.bpp		= 16,
+		.xres		= 480,
+		.yres		= 640,
+		.hsync_len	= 8,
+		.vsync_len	= 2,
+		.left_margin	= 8,
+		.upper_margin	= 2,
+		.right_margin	= 24,
+		.lower_margin	= 4,
+		.sync		= 0,
+	},
+	[1] = {
+		.pixclock       = 153800,
+		.bpp		= 16,
+		.xres		= 240,
+		.yres		= 320,
+		.hsync_len	= 8,
+		.vsync_len	= 2,
+		.left_margin	= 8,
+		.upper_margin	= 2,
+		.right_margin	= 88,
+		.lower_margin	= 2,
+		.sync		= 0,
+	},
 };
 
 static struct pxafb_mach_info em_x270_lcd = {
-	.modes		= &em_x270_lcd_mode,
-	.num_modes	= 1,
+	.modes		= em_x270_lcd_modes,
+	.num_modes	= 2,
 	.lcd_conn	= LCD_COLOR_TFT_16BPP,
 };
+
 static void __init em_x270_init_lcd(void)
 {
 	set_pxa_fb_info(&em_x270_lcd);
@@ -471,6 +634,40 @@ static void __init em_x270_init_lcd(void)
 static inline void em_x270_init_lcd(void) {}
 #endif
 
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static struct pxa2xx_spi_master em_x270_spi_info = {
+	.num_chipselect	= 1,
+};
+
+static struct pxa2xx_spi_chip em_x270_tdo24m_chip = {
+	.rx_threshold = 1,
+	.tx_threshold = 1,
+};
+
+static struct tdo24m_platform_data em_x270_tdo24m_pdata = {
+	.model = TDO35S,
+};
+
+static struct spi_board_info em_x270_spi_devices[] __initdata = {
+	{
+		.modalias = "tdo24m",
+		.max_speed_hz = 1000000,
+		.bus_num = 1,
+		.chip_select = 0,
+		.controller_data = &em_x270_tdo24m_chip,
+		.platform_data = &em_x270_tdo24m_pdata,
+	},
+};
+
+static void __init em_x270_init_spi(void)
+{
+	pxa2xx_set_spi_info(1, &em_x270_spi_info);
+	spi_register_board_info(ARRAY_AND_SIZE(em_x270_spi_devices));
+}
+#else
+static inline void em_x270_init_spi(void) {}
+#endif
+
 #if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
 static void __init em_x270_init_ac97(void)
 {
@@ -481,23 +678,76 @@ static inline void em_x270_init_ac97(void) {}
 #endif
 
 #if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int em_x270_matrix_keys[] = {
+static unsigned int em_x270_module_matrix_keys[] = {
 	KEY(0, 0, KEY_A), KEY(1, 0, KEY_UP), KEY(2, 1, KEY_B),
 	KEY(0, 2, KEY_LEFT), KEY(1, 1, KEY_ENTER), KEY(2, 0, KEY_RIGHT),
 	KEY(0, 1, KEY_C), KEY(1, 2, KEY_DOWN), KEY(2, 2, KEY_D),
 };
 
-struct pxa27x_keypad_platform_data em_x270_keypad_info = {
+struct pxa27x_keypad_platform_data em_x270_module_keypad_info = {
 	/* code map for the matrix keys */
 	.matrix_key_rows	= 3,
 	.matrix_key_cols	= 3,
-	.matrix_key_map		= em_x270_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(em_x270_matrix_keys),
+	.matrix_key_map		= em_x270_module_matrix_keys,
+	.matrix_key_map_size	= ARRAY_SIZE(em_x270_module_matrix_keys),
+};
+
+static unsigned int em_x270_exeda_matrix_keys[] = {
+	KEY(0, 0, KEY_RIGHTSHIFT), KEY(0, 1, KEY_RIGHTCTRL),
+	KEY(0, 2, KEY_RIGHTALT), KEY(0, 3, KEY_SPACE),
+	KEY(0, 4, KEY_LEFTALT), KEY(0, 5, KEY_LEFTCTRL),
+	KEY(0, 6, KEY_ENTER), KEY(0, 7, KEY_SLASH),
+
+	KEY(1, 0, KEY_DOT), KEY(1, 1, KEY_M),
+	KEY(1, 2, KEY_N), KEY(1, 3, KEY_B),
+	KEY(1, 4, KEY_V), KEY(1, 5, KEY_C),
+	KEY(1, 6, KEY_X), KEY(1, 7, KEY_Z),
+
+	KEY(2, 0, KEY_LEFTSHIFT), KEY(2, 1, KEY_SEMICOLON),
+	KEY(2, 2, KEY_L), KEY(2, 3, KEY_K),
+	KEY(2, 4, KEY_J), KEY(2, 5, KEY_H),
+	KEY(2, 6, KEY_G), KEY(2, 7, KEY_F),
+
+	KEY(3, 0, KEY_D), KEY(3, 1, KEY_S),
+	KEY(3, 2, KEY_A), KEY(3, 3, KEY_TAB),
+	KEY(3, 4, KEY_BACKSPACE), KEY(3, 5, KEY_P),
+	KEY(3, 6, KEY_O), KEY(3, 7, KEY_I),
+
+	KEY(4, 0, KEY_U), KEY(4, 1, KEY_Y),
+	KEY(4, 2, KEY_T), KEY(4, 3, KEY_R),
+	KEY(4, 4, KEY_E), KEY(4, 5, KEY_W),
+	KEY(4, 6, KEY_Q), KEY(4, 7, KEY_MINUS),
+
+	KEY(5, 0, KEY_0), KEY(5, 1, KEY_9),
+	KEY(5, 2, KEY_8), KEY(5, 3, KEY_7),
+	KEY(5, 4, KEY_6), KEY(5, 5, KEY_5),
+	KEY(5, 6, KEY_4), KEY(5, 7, KEY_3),
+
+	KEY(6, 0, KEY_2), KEY(6, 1, KEY_1),
+	KEY(6, 2, KEY_ENTER), KEY(6, 3, KEY_END),
+	KEY(6, 4, KEY_DOWN), KEY(6, 5, KEY_UP),
+	KEY(6, 6, KEY_MENU), KEY(6, 7, KEY_F1),
+
+	KEY(7, 0, KEY_LEFT), KEY(7, 1, KEY_RIGHT),
+	KEY(7, 2, KEY_BACK), KEY(7, 3, KEY_HOME),
+	KEY(7, 4, 0), KEY(7, 5, 0),
+	KEY(7, 6, 0), KEY(7, 7, 0),
+};
+
+struct pxa27x_keypad_platform_data em_x270_exeda_keypad_info = {
+	/* code map for the matrix keys */
+	.matrix_key_rows	= 8,
+	.matrix_key_cols	= 8,
+	.matrix_key_map		= em_x270_exeda_matrix_keys,
+	.matrix_key_map_size	= ARRAY_SIZE(em_x270_exeda_matrix_keys),
 };
 
 static void __init em_x270_init_keypad(void)
 {
-	pxa_set_keypad_info(&em_x270_keypad_info);
+	if (machine_is_em_x270())
+		pxa_set_keypad_info(&em_x270_module_keypad_info);
+	else
+		pxa_set_keypad_info(&em_x270_exeda_keypad_info);
 }
 #else
 static inline void em_x270_init_keypad(void) {}
@@ -535,19 +785,264 @@ static void __init em_x270_init_gpio_keys(void)
 static inline void em_x270_init_gpio_keys(void) {}
 #endif
 
-static void __init em_x270_init(void)
+/* Quick Capture Interface and sensor setup */
+#if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
+static struct regulator *em_x270_camera_ldo;
+
+static int em_x270_sensor_init(struct device *dev)
 {
+	int ret;
+
+	ret = gpio_request(GPIO93_CAM_RESET, "camera reset");
+	if (ret)
+		return ret;
+
+	gpio_direction_output(GPIO93_CAM_RESET, 0);
+
+	em_x270_camera_ldo = regulator_get(NULL, "vcc cam");
+	if (em_x270_camera_ldo == NULL) {
+		gpio_free(GPIO93_CAM_RESET);
+		return -ENODEV;
+	}
+
+	ret = regulator_enable(em_x270_camera_ldo);
+	if (ret) {
+		regulator_put(em_x270_camera_ldo);
+		gpio_free(GPIO93_CAM_RESET);
+		return ret;
+	}
+
+	gpio_set_value(GPIO93_CAM_RESET, 1);
+
+	return 0;
+}
+
+struct pxacamera_platform_data em_x270_camera_platform_data = {
+	.init	= em_x270_sensor_init,
+	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
+		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
+	.mclk_10khz = 2600,
+};
+
+static int em_x270_sensor_power(struct device *dev, int on)
+{
+	int ret;
+	int is_on = regulator_is_enabled(em_x270_camera_ldo);
+
+	if (on == is_on)
+		return 0;
+
+	gpio_set_value(GPIO93_CAM_RESET, !on);
+
+	if (on)
+		ret = regulator_enable(em_x270_camera_ldo);
+	else
+		ret = regulator_disable(em_x270_camera_ldo);
+
+	if (ret)
+		return ret;
+
+	gpio_set_value(GPIO93_CAM_RESET, on);
+
+	return 0;
+}
+
+static struct soc_camera_link iclink = {
+	.bus_id	= 0,
+	.power = em_x270_sensor_power,
+};
+
+static struct i2c_board_info em_x270_i2c_cam_info[] = {
+	{
+		I2C_BOARD_INFO("mt9m111", 0x48),
+		.platform_data = &iclink,
+	},
+};
+
+static struct i2c_pxa_platform_data em_x270_i2c_info = {
+	.fast_mode = 1,
+};
+
+static void  __init em_x270_init_camera(void)
+{
+	pxa_set_i2c_info(&em_x270_i2c_info);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(em_x270_i2c_cam_info));
+	pxa_set_camera_info(&em_x270_camera_platform_data);
+}
+#else
+static inline void em_x270_init_camera(void) {}
+#endif
+
+/* DA9030 related initializations */
+#define REGULATOR_CONSUMER(_name, _dev, _supply)			       \
+	static struct regulator_consumer_supply _name##_consumers[] = {	\
+		{							\
+			.dev = _dev,					\
+			.supply = _supply,				\
+		},							\
+	}
+
+REGULATOR_CONSUMER(ldo3, NULL, "vcc gps");
+REGULATOR_CONSUMER(ldo5, NULL, "vcc cam");
+REGULATOR_CONSUMER(ldo10, &pxa_device_mci.dev, "vcc sdio");
+REGULATOR_CONSUMER(ldo12, NULL, "vcc usb");
+REGULATOR_CONSUMER(ldo19, NULL, "vcc gprs");
+
+#define REGULATOR_INIT(_ldo, _min_uV, _max_uV, _ops_mask)		\
+	static struct regulator_init_data _ldo##_data = {		\
+		.constraints = {					\
+			.min_uV = _min_uV,				\
+			.max_uV = _max_uV,				\
+			.state_mem = {					\
+				.enabled = 0,				\
+			},						\
+			.valid_ops_mask = _ops_mask,			\
+		},							\
+		.num_consumer_supplies = ARRAY_SIZE(_ldo##_consumers),	\
+		.consumer_supplies = _ldo##_consumers,			\
+	};
+
+REGULATOR_INIT(ldo3, 3200000, 3200000, REGULATOR_CHANGE_STATUS);
+REGULATOR_INIT(ldo5, 3000000, 3000000, REGULATOR_CHANGE_STATUS);
+REGULATOR_INIT(ldo10, 2000000, 3200000,
+	       REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE);
+REGULATOR_INIT(ldo12, 3000000, 3000000, REGULATOR_CHANGE_STATUS);
+REGULATOR_INIT(ldo19, 3200000, 3200000, REGULATOR_CHANGE_STATUS);
+
+struct led_info em_x270_led_info = {
+	.name = "em-x270:orange",
+	.default_trigger = "battery-charging-or-full",
+};
+
+struct power_supply_info em_x270_psy_info = {
+	.name = "LP555597P6H-FPS",
+	.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
+	.voltage_max_design = 4200000,
+	.voltage_min_design = 3000000,
+	.use_for_apm = 1,
+};
+
+static void em_x270_battery_low(void)
+{
+	apm_queue_event(APM_LOW_BATTERY);
+}
+
+static void em_x270_battery_critical(void)
+{
+	apm_queue_event(APM_CRITICAL_SUSPEND);
+}
+
+struct da9030_battery_info em_x270_batterty_info = {
+	.battery_info = &em_x270_psy_info,
+
+	.charge_milliamp = 1000,
+	.charge_millivolt = 4200,
+
+	.vbat_low = 3600,
+	.vbat_crit = 3400,
+	.vbat_charge_start = 4100,
+	.vbat_charge_stop = 4200,
+	.vbat_charge_restart = 4000,
+
+	.vcharge_min = 3200,
+	.vcharge_max = 5500,
+
+	.tbat_low = 197,
+	.tbat_high = 78,
+	.tbat_restart = 100,
+
+	.batmon_interval = 0,
+
+	.battery_low = em_x270_battery_low,
+	.battery_critical = em_x270_battery_critical,
+};
+
+#define DA9030_SUBDEV(_name, _id, _pdata)	\
+	{					\
+		.name = "da903x-" #_name,	\
+		.id = DA9030_ID_##_id,		\
+		.platform_data = _pdata,	\
+	}
+
+#define DA9030_LDO(num)	DA9030_SUBDEV(regulator, LDO##num, &ldo##num##_data)
+
+struct da903x_subdev_info em_x270_da9030_subdevs[] = {
+	DA9030_LDO(3),
+	DA9030_LDO(5),
+	DA9030_LDO(10),
+	DA9030_LDO(12),
+	DA9030_LDO(19),
+
+	DA9030_SUBDEV(led, LED_PC, &em_x270_led_info),
+	DA9030_SUBDEV(backlight, WLED, &em_x270_led_info),
+	DA9030_SUBDEV(battery, BAT, &em_x270_batterty_info),
+};
+
+static struct da903x_platform_data em_x270_da9030_info = {
+	.num_subdevs = ARRAY_SIZE(em_x270_da9030_subdevs),
+	.subdevs = em_x270_da9030_subdevs,
+};
+
+static struct i2c_board_info em_x270_i2c_pmic_info = {
+	I2C_BOARD_INFO("da9030", 0x49),
+	.irq = IRQ_GPIO(0),
+	.platform_data = &em_x270_da9030_info,
+};
+
+static struct i2c_pxa_platform_data em_x270_pwr_i2c_info = {
+	.use_pio = 1,
+};
+
+static void __init em_x270_init_da9030(void)
+{
+	pxa27x_set_i2c_power_info(&em_x270_pwr_i2c_info);
+	i2c_register_board_info(1, &em_x270_i2c_pmic_info, 1);
+}
+
+static void __init em_x270_module_init(void)
+{
+	pr_info("%s\n", __func__);
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config));
 
+	mmc_cd = GPIO13_MMC_CD;
+	nand_rb = GPIO56_NAND_RB;
+	dm9000_flags = DM9000_PLATF_32BITONLY;
+}
+
+static void __init em_x270_exeda_init(void)
+{
+	pr_info("%s\n", __func__);
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(exeda_pin_config));
+
+	mmc_cd = GPIO114_MMC_CD;
+	nand_rb = GPIO20_NAND_RB;
+	dm9000_flags = DM9000_PLATF_16BITONLY;
+}
+
+static void __init em_x270_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(common_pin_config));
+
+	if (machine_is_em_x270())
+		em_x270_module_init();
+	else if (machine_is_exeda())
+		em_x270_exeda_init();
+	else
+		panic("Unsupported machine: %d\n", machine_arch_type);
+
+	em_x270_init_da9030();
 	em_x270_init_dm9000();
 	em_x270_init_rtc();
 	em_x270_init_nand();
+	em_x270_init_nor();
 	em_x270_init_lcd();
 	em_x270_init_mmc();
 	em_x270_init_ohci();
 	em_x270_init_keypad();
 	em_x270_init_gpio_keys();
 	em_x270_init_ac97();
+	em_x270_init_camera();
+	em_x270_init_spi();
 }
 
 MACHINE_START(EM_X270, "Compulab EM-X270")
@@ -559,3 +1054,13 @@ MACHINE_START(EM_X270, "Compulab EM-X270")
 	.timer		= &pxa_timer,
 	.init_machine	= em_x270_init,
 MACHINE_END
+
+MACHINE_START(EXEDA, "Compulab eXeda")
+	.boot_params	= 0xa0000100,
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa27x_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= em_x270_init,
+MACHINE_END