arm: at91 move board.h to arch/arm/mach-at91

as this is only used board old style board

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>

1 files changed, 0 insertions, 141 deletions

diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
deleted file mode 100644
index 662451d85fc9..000000000000
--- a/arch/arm/mach-at91/include/mach/board.h
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/board.h
- *
- *  Copyright (C) 2005 HP Labs
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/*
- * These are data structures found in platform_device.dev.platform_data,
- * and describing board-specific data needed by drivers.  For example,
- * which pin is used for a given GPIO role.
- *
- * In 2.6, drivers should strongly avoid board-specific knowledge so
- * that supporting new boards normally won't require driver patches.
- * Most board-specific knowledge should be in arch/.../board-*.c files.
- */
-
-#ifndef __ASM_ARCH_BOARD_H
-#define __ASM_ARCH_BOARD_H
-
-#include <linux/platform_data/atmel.h>
-
- /* USB Device */
-extern void __init at91_add_device_udc(struct at91_udc_data *data);
-
- /* USB High Speed Device */
-extern void __init at91_add_device_usba(struct usba_platform_data *data);
-
- /* Compact Flash */
-extern void __init at91_add_device_cf(struct at91_cf_data *data);
-
- /* MMC / SD */
-  /* at91_mci platform config */
-struct at91_mmc_data {
-	int		det_pin;	/* card detect IRQ */
-	unsigned	slot_b:1;	/* uses Slot B */
-	unsigned	wire4:1;	/* (SD) supports DAT0..DAT3 */
-	int		wp_pin;		/* (SD) writeprotect detect */
-	int		vcc_pin;	/* power switching (high == on) */
-};
-extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data);
-
-  /* atmel-mci platform config */
-extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data);
-
-extern void __init at91_add_device_eth(struct macb_platform_data *data);
-
- /* USB Host */
-extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
-extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data);
-extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data);
-
-extern void __init at91_add_device_nand(struct atmel_nand_data *data);
-
- /* I2C*/
-#if defined(CONFIG_ARCH_AT91SAM9G45)
-extern void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices);
-#else
-extern void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices);
-#endif
-
- /* SPI */
-extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);
-
- /* Serial */
-#define ATMEL_UART_CTS	0x01
-#define ATMEL_UART_RTS	0x02
-#define ATMEL_UART_DSR	0x04
-#define ATMEL_UART_DTR	0x08
-#define ATMEL_UART_DCD	0x10
-#define ATMEL_UART_RI	0x20
-
-extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins);
-
-extern struct platform_device *atmel_default_console_device;
-
-extern void __init at91_add_device_serial(void);
-
-/*
- * PWM
- */
-#define AT91_PWM0	0
-#define AT91_PWM1	1
-#define AT91_PWM2	2
-#define AT91_PWM3	3
-
-extern void __init at91_add_device_pwm(u32 mask);
-
-/*
- * SSC -- accessed through ssc_request(id).  Drivers don't bind to SSC
- * platform devices.  Their SSC ID is part of their configuration data,
- * along with information about which SSC signals they should use.
- */
-#define ATMEL_SSC_TK	0x01
-#define ATMEL_SSC_TF	0x02
-#define ATMEL_SSC_TD	0x04
-#define ATMEL_SSC_TX	(ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD)
-
-#define ATMEL_SSC_RK	0x10
-#define ATMEL_SSC_RF	0x20
-#define ATMEL_SSC_RD	0x40
-#define ATMEL_SSC_RX	(ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD)
-
-extern void __init at91_add_device_ssc(unsigned id, unsigned pins);
-
- /* LCD Controller */
-struct atmel_lcdfb_info;
-extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data);
-
- /* AC97 */
-extern void __init at91_add_device_ac97(struct ac97c_platform_data *data);
-
- /* ISI */
-struct isi_platform_data;
-extern void __init at91_add_device_isi(struct isi_platform_data *data,
-		bool use_pck_as_mck);
-
- /* Touchscreen Controller */
-extern void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data);
-
-/* CAN */
-extern void __init at91_add_device_can(struct at91_can_data *data);
-
- /* LEDs */
-extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
-extern void __init at91_pwm_leds(struct gpio_led *leds, int nr);
-
-#endif