ARM: imx_v6_v7_defconfig: enable useful configurations for Vybrid

Enable configuration options useful for Vybrid:
- NFC NAND driver
- USB dual-role controller support
- FTM PWM driver
- DSPI SPI driver
- Colibri VF50 Touchscreen support.

Beside that, enable useful configurations such as IIO hwmon support
(used in i.MX 23/28, patch pending for Vybrid), PWM LED support and
CPU idle support.

Regenerated config using savedefconfig (which removes some configs
which are now enabled by default).

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

1 files changed, 11 insertions, 8 deletions

diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index d218c275ecdc..978c5deeb47c 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -57,6 +57,7 @@ CONFIG_KEXEC=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_ARM_IMX6Q_CPUFREQ=y
+CONFIG_CPU_IDLE=y
 CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_BINFMT_MISC=m
@@ -72,7 +73,6 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_IPV6=y
 CONFIG_NETFILTER=y
 CONFIG_CAN=y
 CONFIG_CAN_FLEXCAN=y
@@ -104,10 +104,13 @@ CONFIG_MTD_M25P80=y
 CONFIG_MTD_SST25L=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_GPMI_NAND=y
+CONFIG_MTD_NAND_VF610_NFC=y
 CONFIG_MTD_NAND_MXC=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_SPI_FSL_QUADSPI=y
 CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_FASTMAP=y
+CONFIG_MTD_UBI_BLOCK=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=65536
@@ -145,7 +148,6 @@ CONFIG_USB_RTL8152=m
 CONFIG_USB_USBNET=m
 CONFIG_USB_NET_CDC_EEM=m
 CONFIG_BRCMFMAC=m
-CONFIG_WL_TI=y
 CONFIG_WL12XX=m
 CONFIG_WLCORE_SDIO=m
 # CONFIG_WILINK_PLATFORM_DATA is not set
@@ -164,6 +166,7 @@ CONFIG_TOUCHSCREEN_MC13783=y
 CONFIG_TOUCHSCREEN_TSC2007=y
 CONFIG_TOUCHSCREEN_STMPE=y
 CONFIG_TOUCHSCREEN_SX8654=y
+CONFIG_TOUCHSCREEN_COLIBRI_VF50=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_MMA8450=y
 CONFIG_SERIO_SERPORT=m
@@ -173,7 +176,6 @@ CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
 CONFIG_SERIAL_FSL_LPUART=y
 CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
-CONFIG_HW_RANDOM=y
 # CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
 # CONFIG_I2C_HELPER_AUTO is not set
@@ -182,6 +184,7 @@ CONFIG_I2C_ALGOPCA=m
 CONFIG_I2C_IMX=y
 CONFIG_SPI=y
 CONFIG_SPI_IMX=y
+CONFIG_SPI_FSL_DSPI=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_MC9S08DZ60=y
 CONFIG_GPIO_PCA953X=y
@@ -192,6 +195,7 @@ CONFIG_POWER_RESET_IMX=y
 CONFIG_POWER_RESET_SYSCON=y
 CONFIG_POWER_RESET_SYSCON_POWEROFF=y
 CONFIG_SENSORS_GPIO_FAN=y
+CONFIG_SENSORS_IIO_HWMON=y
 CONFIG_THERMAL=y
 CONFIG_CPU_THERMAL=y
 CONFIG_IMX_THERMAL=y
@@ -227,7 +231,6 @@ CONFIG_DRM=y
 CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_DRM_DW_HDMI_AHB_AUDIO=m
 CONFIG_DRM_IMX=y
-CONFIG_DRM_IMX_FB_HELPER=y
 CONFIG_DRM_IMX_PARALLEL_DISPLAY=y
 CONFIG_DRM_IMX_TVE=y
 CONFIG_DRM_IMX_LDB=y
@@ -271,6 +274,7 @@ CONFIG_USB_EHSET_TEST_FIXTURE=m
 CONFIG_NOP_USB_XCEIV=y
 CONFIG_USB_MXS_PHY=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_FSL_USB2=y
 CONFIG_USB_CONFIGFS=m
 CONFIG_USB_CONFIGFS_SERIAL=y
 CONFIG_USB_CONFIGFS_ACM=y
@@ -296,6 +300,7 @@ CONFIG_MMC_SDHCI_ESDHC_IMX=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_PWM=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_ONESHOT=y
@@ -312,14 +317,15 @@ CONFIG_RTC_DRV_MC13XXX=y
 CONFIG_RTC_DRV_MXC=y
 CONFIG_RTC_DRV_SNVS=y
 CONFIG_DMADEVICES=y
+CONFIG_FSL_EDMA=y
 CONFIG_IMX_SDMA=y
 CONFIG_MXS_DMA=y
-CONFIG_FSL_EDMA=y
 CONFIG_STAGING=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_IIO=y
 CONFIG_VF610_ADC=y
 CONFIG_PWM=y
+CONFIG_PWM_FSL_FTM=y
 CONFIG_PWM_IMX=y
 CONFIG_NVMEM=y
 CONFIG_NVMEM_IMX_OCOTP=y
@@ -330,9 +336,6 @@ CONFIG_EXT2_FS_SECURITY=y
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set