Merge tag 'samsung-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt

Samsung DTS ARM changes for v5.8

1. Add DTS for Exynos4210-based Samsung Galaxy S2 (GT-I9100)
   mobile phone,
2. Enable WiFi and Bluetooth in multiple boards,
3. Add new features to S5Pv210-based Aries family of mobile phones
   (e.g. Samsung Galaxy S): necessary configuration for suspend, audio
   support, USB mux, touch keys, panel, i2c-gpio adapters, FM radio, ADC,
4. Many minor fixes (e.g. GPIO polarity, interrupts).

* tag 'samsung-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (29 commits)
  ARM: dts: s5pv210: Set MAX8998 GPIO pulls on Aries boards
  ARM: dts: s5pv210: Correct FIMC definitions
  ARM: dts: s5pv210: Assign clocks to MMC devices on Aries boards
  ARM: dts: s5pv210: Enable ADC on Aries boards
  ARM: dts: s5pv210: Add an ADC node
  ARM: dts: s5pv210: Disable pull for vibrator enable GPIO on Aries boards
  ARM: dts: s5pv210: Add si470x FM radio to Galaxy S
  ARM: dts: s5pv210: Add remaining i2c-gpio adapters to Aries boards
  ARM: dts: s5pv210: Add panel support to Aries boards
  ARM: dts: s5pv210: Add touchkey support to Aries boards
  ARM: dts: s5pv210: Add FSA9480 support to Aries boards
  ARM: dts: s5pv210: Add WM8994 support to Aries boards
  ARM: dts: s5pv210: Disable pulls on GPIO I2C adapters for Aries
  ARM: dts: s5pv210: Set keep-power-in-suspend for SDHCI1 on Aries
  ARM: dts: s5pv210: Correct gpi pinctrl node name
  ARM: dts: s5pv210: Add sleep GPIO configuration for Galaxy S
  ARM: dts: s5pv210: Add sleep GPIO configuration for Fascinate4G
  ARM: dts: s5pv210: Add helper define for sleep gpio config
  ARM: dts: exynos: Enable WLAN support for the UniversalC210 board
  ARM: dts: exynos: Enable WLAN support for the Rinato board
  ...

Link: https://lore.kernel.org/r/20200512122922.5700-2-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

18 files changed, 1819 insertions, 74 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 4b5828d834f3..14e0602dd622 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -181,6 +181,7 @@ dtb-$(CONFIG_ARCH_EXYNOS3) += \
 	exynos3250-monk.dtb \
 	exynos3250-rinato.dtb
 dtb-$(CONFIG_ARCH_EXYNOS4) += \
+	exynos4210-i9100.dtb \
 	exynos4210-origen.dtb \
 	exynos4210-smdkv310.dtb \
 	exynos4210-trats.dtb \
diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
index 248bd372fe70..ca29d7ed8216 100644
--- a/arch/arm/boot/dts/exynos3250-monk.dts
+++ b/arch/arm/boot/dts/exynos3250-monk.dts
@@ -57,7 +57,8 @@
 
 	i2c_max77836: i2c-gpio-0 {
 		compatible = "i2c-gpio";
-		gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>;
+		sda-gpios = <&gpd0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpd0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index 86c26a4edfd7..aba8350cfdaf 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -50,9 +50,15 @@
 		};
 	};
 
+	wlan_pwrseq: mshc1-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
+	};
+
 	i2c_max77836: i2c-gpio-0 {
 		compatible = "i2c-gpio";
-		gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>;
+		sda-gpios = <&gpd0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpd0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -605,8 +611,6 @@
 };
 
 &mshc_0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
 	broken-cd;
 	non-removable;
 	cap-mmc-highspeed;
@@ -625,10 +629,48 @@
 	status = "okay";
 };
 
+&mshc_1 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	non-removable;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	samsung,dw-mshc-ciu-div = <1>;
+	samsung,dw-mshc-sdr-timing = <0 1>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus1 &sd1_bus4>;
+	bus-width = <4>;
+
+	mmc-pwrseq = <&wlan_pwrseq>;
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4334-fmac";
+		reg = <1>;
+
+		interrupt-parent = <&gpx1>;
+		interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
 &serial_0 {
 	assigned-clocks = <&cmu CLK_SCLK_UART0>;
 	assigned-clock-rates = <100000000>;
 	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		max-speed = <3000000>;
+		shutdown-gpios = <&gpe0 0 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+		clocks = <&s2mps14_osc S2MPS11_CLK_BT>;
+	};
 };
 
 &serial_1 {
diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts
new file mode 100644
index 000000000000..6d0c04d77a39
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4210-i9100.dts
@@ -0,0 +1,768 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4210 based Galaxy S2 (GT-I9100 version) device tree
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2020 Stenkin Evgeniy <stenkinevgeniy@gmail.com>
+ * Copyright (c) 2020 Paul Cercueil <paul@crapouillou.net>
+ */
+
+/dts-v1/;
+#include "exynos4210.dtsi"
+#include "exynos4412-ppmu-common.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+
+/ {
+	model = "Samsung Galaxy S2 (GT-I9100)";
+	compatible = "samsung,i9100", "samsung,exynos4210", "samsung,exynos4";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x40000000>;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	vemmc_reg: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VMEM_VDD_2.8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	tsp_reg: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "TSP_FIXED_VOLTAGES";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpl0 3 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	cam_af_28v_reg: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "8M_AF_2.8V_EN";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpk1 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	cam_io_en_reg: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "CAM_IO_EN";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpe2 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	cam_io_12v_reg: regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "8M_1.2V_EN";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		gpio = <&gpe2 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vt_core_15v_reg: regulator-5 {
+		compatible = "regulator-fixed";
+		regulator-name = "VT_CORE_1.5V";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		vol-down {
+			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			label = "volume down";
+			debounce-interval = <10>;
+		};
+
+		vol-up {
+			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			label = "volume up";
+			debounce-interval = <10>;
+		};
+
+		power {
+			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "power";
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+
+		ok {
+			gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_OK>;
+			label = "ok";
+			debounce-interval = <10>;
+		};
+	};
+
+	wlan_pwrseq: sdhci3-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpl1 2 GPIO_ACTIVE_LOW>;
+	};
+
+	i2c_max17042_fuel: i2c-gpio {
+		compatible = "i2c-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sda-gpios = <&gpy4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpy4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <5>;
+
+		battery@36 {
+			compatible = "maxim,max17042";
+
+			interrupt-parent = <&gpx2>;
+			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+
+			pinctrl-0 = <&max17042_fuel_irq>;
+			pinctrl-names = "default";
+
+			reg = <0x36>;
+			maxim,over-heat-temp = <700>;
+			maxim,over-volt = <4500>;
+		};
+	};
+
+	spi-lcd {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		num-chipselects = <1>;
+		cs-gpios = <&gpy4 3 GPIO_ACTIVE_LOW>;
+		sck-gpios = <&gpy3 1 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpy3 3 GPIO_ACTIVE_HIGH>;
+
+		lcd@0 {
+			compatible = "samsung,ld9040";
+			reg = <0>;
+
+			spi-max-frequency = <1200000>;
+
+			vdd3-supply = <&vmipi_reg>;
+			vci-supply = <&vcclcd_reg>;
+
+			reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
+			power-on-delay = <10>;
+			reset-delay = <10>;
+
+			panel-width-mm = <90>;
+			panel-height-mm = <154>;
+
+			display-timings {
+				timing {
+					clock-frequency = <23492370>;
+					hactive = <480>;
+					vactive = <800>;
+					hback-porch = <16>;
+					hfront-porch = <16>;
+					vback-porch = <2>;
+					vfront-porch = <28>;
+					hsync-len = <2>;
+					vsync-len = <1>;
+					hsync-active = <0>;
+					vsync-active = <0>;
+					de-active = <0>;
+					pixelclk-active = <0>;
+				};
+			};
+
+			port {
+				lcd_ep: endpoint {
+					remote-endpoint = <&fimd_dpi_ep>;
+				};
+			};
+		};
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			cooling-maps {
+				map0 {
+					/* Corresponds to 800MHz */
+					cooling-device = <&cpu0 2 2>;
+				};
+				map1 {
+					/* Corresponds to 200MHz */
+					cooling-device = <&cpu0 4 4>;
+				};
+			};
+		};
+	};
+};
+
+&camera {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu0-supply = <&varm_breg>;
+};
+
+&ehci {
+	status = "okay";
+
+	phys = <&exynos_usbphy 1>;
+	phy-names = "host";
+};
+
+&exynos_usbphy {
+	status = "okay";
+
+	vbus-supply = <&safe1_sreg>;
+};
+
+&fimc_0 {
+	status = "okay";
+
+	assigned-clocks = <&clock CLK_MOUT_FIMC0>, <&clock CLK_SCLK_FIMC0>;
+	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+	assigned-clock-rates = <0>, <160000000>;
+};
+
+&fimc_1 {
+	status = "okay";
+
+	assigned-clocks = <&clock CLK_MOUT_FIMC1>, <&clock CLK_SCLK_FIMC1>;
+	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+	assigned-clock-rates = <0>, <160000000>;
+};
+
+&fimc_2 {
+	status = "okay";
+
+	assigned-clocks = <&clock CLK_MOUT_FIMC2>, <&clock CLK_SCLK_FIMC2>;
+	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+	assigned-clock-rates = <0>, <160000000>;
+};
+
+&fimc_3 {
+	status = "okay";
+
+	assigned-clocks = <&clock CLK_MOUT_FIMC3>, <&clock CLK_SCLK_FIMC3>;
+	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+	assigned-clock-rates = <0>, <160000000>;
+};
+
+&fimd {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	samsung,invert-vden;
+	samsung,invert-vclk;
+
+	pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
+	pinctrl-names = "default";
+
+	port@3 {
+		reg = <3>;
+
+		fimd_dpi_ep: endpoint {
+			remote-endpoint = <&lcd_ep>;
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+
+	mali-supply = <&vg3d_breg>;
+	regulator-microvolt-offset = <50000>;
+	regulator-microsecs-delay = <50>;
+};
+
+&hsotg {
+	status = "okay";
+
+	dr_mode = "otg";
+	vusb_d-supply = <&vusb_reg>;
+	vusb_a-supply = <&vusbdac_reg>;
+};
+
+&i2c_3 {
+	status = "okay";
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+
+	pinctrl-0 = <&i2c3_bus>;
+	pinctrl-names = "default";
+
+	mxt224-touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+
+		interrupt-parent = <&gpx0>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&i2c_5 {
+	status = "okay";
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+
+	pinctrl-0 = <&i2c5_bus>;
+	pinctrl-names = "default";
+
+	max8997_pmic@66 {
+		compatible = "maxim,max8997-pmic";
+		reg = <0x66>;
+
+		interrupts-extended = <&gpx0 7 IRQ_TYPE_NONE>,
+				      <&gpx2 3 IRQ_TYPE_EDGE_FALLING>;
+
+		max8997,pmic-buck1-uses-gpio-dvs;
+		max8997,pmic-buck2-uses-gpio-dvs;
+		max8997,pmic-buck5-uses-gpio-dvs;
+
+		max8997,pmic-ignore-gpiodvs-side-effect;
+		max8997,pmic-buck125-default-dvs-idx = <0>;
+
+		max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
+						 <&gpx0 6 GPIO_ACTIVE_HIGH>,
+						 <&gpl0 0 GPIO_ACTIVE_HIGH>;
+
+		max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
+						 <1250000>, <1200000>,
+						 <1150000>, <1100000>,
+						 <1000000>, <950000>;
+
+		max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>,
+						 <950000>,  <900000>,
+						 <1100000>, <1000000>,
+						 <950000>,  <900000>;
+
+		max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
+						 <1200000>, <1200000>,
+						 <1200000>, <1200000>,
+						 <1200000>, <1200000>;
+
+		pinctrl-0 = <&max8997_irq>, <&otg_gp>, <&usb_sel>;
+		pinctrl-names = "default";
+
+		regulators {
+			vadc_reg: LDO1 {
+				regulator-name = "VADC_3.3V_C210";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+
+			};
+			valive_reg: LDO2 {
+				regulator-name = "VALIVE_1.1V_C210";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+
+			};
+
+			vusb_reg: LDO3 {
+				regulator-name = "VUSB_1.1V_C210";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+			};
+
+			vmipi_reg: LDO4 {
+				regulator-name = "VMIPI_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vhsic_reg: LDO5 {
+				regulator-name = "VHSIC_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vpda_reg: LDO6 {
+				regulator-name = "VCC_1.8V_PDA";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcam_reg: LDO7 {
+				regulator-name = "CAM_ISP_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vusbdac_reg: LDO8 {
+				regulator-name = "VUSB+VDAC_3.3V_C210";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vccpda_reg: LDO9 {
+				regulator-name = "VCC_2.8V_PDA";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			vtouch_reg: LDO11 {
+				regulator-name = "TOUCH_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			vpll_reg: LDO10 {
+				regulator-name = "VPLL_1.1V";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			vtcam_reg: LDO12 {
+				regulator-name = "VT_CAM_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vcclcd_reg: LDO13 {
+				regulator-name = "VCC_3.0V_LCD";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vmotor_reg: LDO14 {
+				regulator-name = "VCC_2.8V_MOTOR";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			vled_reg: LDO15 {
+				regulator-name = "LED_A_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			camsensor_reg: LDO16 {
+				regulator-name = "CAM_SENSOR_IO_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vtf_reg: LDO17 {
+				regulator-name = "VTF_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			vtouchled_reg: LDO18 {
+				regulator-name = "TOUCH_LED_3.3V";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vddq_reg: LDO21 {
+				regulator-name = "VDDQ_M1M2_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			varm_breg: BUCK1 {
+				regulator-name = "VARM_1.2V_C210";
+				regulator-min-microvolt = <65000>;
+				regulator-max-microvolt = <2225000>;
+				regulator-always-on;
+			};
+
+			vint_breg: BUCK2 {
+				regulator-name = "VINT_1.1V_C210";
+				regulator-min-microvolt = <65000>;
+				regulator-max-microvolt = <2225000>;
+				regulator-always-on;
+			};
+
+			vg3d_breg: BUCK3 {
+				regulator-name = "G3D_1.1V";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			camisp_breg: BUCK4 {
+				regulator-name = "CAM_ISP_CORE_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			vmem_breg: BUCK5 {
+				regulator-name = "VMEM_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vccsub_breg: BUCK7 {
+				regulator-name = "VCC_SUB_2.0V";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			safe1_sreg: ESAFEOUT1 {
+				regulator-name = "SAFEOUT1";
+			};
+
+			safe2_sreg: ESAFEOUT2 {
+				regulator-name = "SAFEOUT2";
+				regulator-boot-on;
+			};
+
+			charger_reg: CHARGER {
+				regulator-name = "CHARGER";
+				regulator-min-microamp = <60000>;
+				regulator-max-microamp = <2580000>;
+				regulator-always-on;
+			};
+
+			chargercv_reg: CHARGER_CV {
+				regulator-name = "CHARGER_CV";
+				regulator-min-microvolt = <3800000>;
+				regulator-max-microvolt = <4100000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c_7 {
+	status = "okay";
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <400000>;
+
+	pinctrl-0 = <&i2c7_bus>;
+	pinctrl-names = "default";
+
+	ak8975@c {
+		compatible = "asahi-kasei,ak8975";
+		reg = <0x0c>;
+
+		gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&pinctrl_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep0>;
+
+	sleep0: sleep-states {
+		gpa0-0 {
+			samsung,pins = "gpa0-0";
+			samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+			samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		};
+
+		gpa0-1 {
+			samsung,pins = "gpa0-1";
+			samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT0>;
+			samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		};
+
+		gpa0-2 {
+			samsung,pins = "gpa0-2";
+			samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+			samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		};
+
+		gpa0-3 {
+			samsung,pins = "gpa0-3";
+			samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
+			samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		};
+	};
+};
+
+&pinctrl_1 {
+	mhl_int: mhl-int {
+		samsung,pins = "gpf3-5";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i2c_mhl_bus: i2c-mhl-bus {
+		samsung,pins = "gpf0-4", "gpf0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	usb_sel: usb-sel {
+		samsung,pins = "gpl0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-val = <0>;
+	};
+
+	bt_en: bt-en {
+		samsung,pins = "gpl0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-val = <0>;
+	};
+
+	bt_res: bt-res {
+		samsung,pins = "gpl1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-val = <0>;
+	};
+
+	otg_gp: otg-gp {
+		samsung,pins = "gpx3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-val = <0>;
+	};
+
+	mag_mhl_gpio: mag-mhl-gpio {
+		samsung,pins = "gpd0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	max8997_irq: max8997-irq {
+		samsung,pins = "gpx0-7";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	max17042_fuel_irq: max17042-fuel-irq {
+		samsung,pins = "gpx2-3";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	tsp224_irq: tsp224-irq {
+		samsung,pins = "gpx0-4";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	};
+};
+
+&sdhci_0 {
+	status = "okay";
+
+	bus-width = <8>;
+	non-removable;
+	vmmc-supply = <&vemmc_reg>;
+
+	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_bus8>;
+	pinctrl-names = "default";
+};
+
+&sdhci_2 {
+	status = "okay";
+
+	bus-width = <4>;
+	cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vtf_reg>;
+
+	pinctrl-0 = <&sd2_clk>, <&sd2_cmd>, <&sd2_bus4>;
+	pinctrl-names = "default";
+};
+
+&sdhci_3 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	non-removable;
+	bus-width = <4>;
+	mmc-pwrseq = <&wlan_pwrseq>;
+	vmmc-supply = <&vtf_reg>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>;
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4330-fmac";
+		reg = <1>;
+
+		interrupt-parent = <&gpx2>;
+		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&serial_0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&bt_en>, <&bt_res>, <&uart0_data>, <&uart0_fctl>;
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+
+		shutdown-gpios = <&gpl0 4 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpl1 0 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&serial_2 {
+	status = "okay";
+};
+
+&serial_3 {
+	status = "okay";
+};
+
+&tmu {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index 0d1e1a9c2f6e..890525b10d22 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -251,12 +251,7 @@
 			};
 
 			buck1_reg: BUCK1 {
-				/*
-				* HACK: The real name is VDD_ARM_1.2V,
-				* but exynos-cpufreq does not support
-				* DT-based regulator lookup yet.
-				*/
-				regulator-name = "vdd_arm";
+				regulator-name = "VDD_ARM_1.2V";
 				regulator-min-microvolt = <950000>;
 				regulator-max-microvolt	= <1350000>;
 				regulator-always-on;
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index 7c39dd1c4d3a..3d791db6095c 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -121,6 +121,11 @@
 		};
 	};
 
+	wlan_pwrseq: sdhci3-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpl1 2 GPIO_ACTIVE_LOW>;
+	};
+
 	fixed-rate-clocks {
 		xxti {
 			compatible = "samsung,clock-xxti";
@@ -280,11 +285,10 @@
 
 	max8997_pmic@66 {
 		compatible = "maxim,max8997-pmic";
-		interrupts-extended = <&gpx0 7 0>, <&gpx2 3 0>;
 
 		reg = <0x66>;
-		interrupt-parent = <&gpx0>;
-		interrupts = <7 IRQ_TYPE_NONE>;
+		interrupts-extended = <&gpx0 7 IRQ_TYPE_LEVEL_LOW>,
+				      <&gpx2 3 IRQ_TYPE_EDGE_FALLING>;
 
 		max8997,pmic-buck1-uses-gpio-dvs;
 		max8997,pmic-buck2-uses-gpio-dvs;
@@ -403,12 +407,7 @@
 			};
 
 			varm_breg: BUCK1 {
-			     /*
-			      * HACK: The real name is VARM_1.2V_C210,
-			      * but exynos-cpufreq does not support
-			      * DT-based regulator lookup yet.
-			      */
-			     regulator-name = "vdd_arm";
+			     regulator-name = "VARM_1.2V_C210";
 			     regulator-min-microvolt = <900000>;
 			     regulator-max-microvolt = <1350000>;
 			     regulator-always-on;
@@ -471,6 +470,30 @@
 	status = "okay";
 };
 
+&sdhci_3 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	non-removable;
+	bus-width = <4>;
+	mmc-pwrseq = <&wlan_pwrseq>;
+	vmmc-supply = <&tflash_reg>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>;
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4330-fmac";
+		reg = <1>;
+
+		interrupt-parent = <&gpx2>;
+		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
 &serial_0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index 9dda6bdb9253..02fde1a75ebd 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -50,6 +50,11 @@
 		enable-active-high;
 	};
 
+	wlan_pwrseq: sdhci3-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpe3 1 GPIO_ACTIVE_LOW>;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -164,7 +169,8 @@
 
 	hdmi_ddc: i2c-ddc {
 		compatible = "i2c-gpio";
-		gpios = <&gpe4 2 GPIO_ACTIVE_HIGH &gpe4 3 GPIO_ACTIVE_HIGH>;
+		sda-gpios = <&gpe4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpe4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		i2c-gpio,delay-us = <100>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -317,7 +323,7 @@
 		max8952,sync-freq = <0>;
 		max8952,ramp-speed = <0>;
 
-		regulator-name = "vdd_arm";
+		regulator-name = "VARM_1.2V_C210";
 		regulator-min-microvolt = <770000>;
 		regulator-max-microvolt = <1400000>;
 		regulator-always-on;
@@ -563,6 +569,29 @@
 	status = "okay";
 };
 
+&sdhci_3 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	non-removable;
+	bus-width = <4>;
+	mmc-pwrseq = <&wlan_pwrseq>;
+	vmmc-supply = <&ldo5_reg>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>;
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4330-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpx2>;
+		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
 &serial_0 {
 	status = "okay";
 	/delete-property/dmas;
diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
index 44f97546dd0a..53b3ca3effab 100644
--- a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
+++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
@@ -53,7 +53,8 @@
 
 	i2c_ak8975: i2c-gpio-0 {
 		compatible = "i2c-gpio";
-		gpios = <&gpy2 4 GPIO_ACTIVE_HIGH>, <&gpy2 5 GPIO_ACTIVE_HIGH>;
+		sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpy2 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		i2c-gpio,delay-us = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -68,7 +69,8 @@
 
 	i2c_cm36651: i2c-gpio-2 {
 		compatible = "i2c-gpio";
-		gpios = <&gpf0 0 GPIO_ACTIVE_LOW>, <&gpf0 1 GPIO_ACTIVE_LOW>;
+		sda-gpios = <&gpf0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpf0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		i2c-gpio,delay-us = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
index 3023bc3b68ce..2c8111c6b065 100644
--- a/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -140,7 +140,8 @@
 
 	i2c_max77693: i2c-gpio-1 {
 		compatible = "i2c-gpio";
-		gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>;
+		sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		i2c-gpio,delay-us = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -188,7 +189,8 @@
 
 	i2c_max77693_fuel: i2c-gpio-3 {
 		compatible = "i2c-gpio";
-		gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>;
+		sda-gpios = <&gpf1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpf1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		i2c-gpio,delay-us = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -228,7 +230,8 @@
 
 	i2c-mhl {
 		compatible = "i2c-gpio";
-		gpios = <&gpf0 4 GPIO_ACTIVE_HIGH>, <&gpf0 6 GPIO_ACTIVE_HIGH>;
+		sda-gpios = <&gpf0 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpf0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		i2c-gpio,delay-us = <100>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -820,7 +823,7 @@
 			};
 
 			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
+				regulator-name = "VDD_MIF";
 				regulator-min-microvolt = <850000>;
 				regulator-max-microvolt = <1100000>;
 				regulator-always-on;
@@ -831,7 +834,7 @@
 			};
 
 			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
+				regulator-name = "VDD_ARM";
 				regulator-min-microvolt = <850000>;
 				regulator-max-microvolt = <1500000>;
 				regulator-always-on;
@@ -842,7 +845,7 @@
 			};
 
 			buck3_reg: BUCK3 {
-				regulator-name = "vdd_int";
+				regulator-name = "VDD_INT";
 				regulator-min-microvolt = <850000>;
 				regulator-max-microvolt = <1150000>;
 				regulator-always-on;
@@ -853,7 +856,7 @@
 			};
 
 			buck4_reg: BUCK4 {
-				regulator-name = "vdd_g3d";
+				regulator-name = "VDD_G3D";
 				regulator-min-microvolt = <850000>;
 				regulator-max-microvolt = <1150000>;
 				regulator-boot-on;
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index 73d6a71da88d..a5c1ce1e396c 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -430,7 +430,7 @@
 			};
 
 			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
+				regulator-name = "VDD_MIF";
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <1100000>;
 				regulator-always-on;
@@ -438,7 +438,7 @@
 			};
 
 			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
+				regulator-name = "VDD_ARM";
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <1350000>;
 				regulator-always-on;
@@ -446,7 +446,7 @@
 			};
 
 			buck3_reg: BUCK3 {
-				regulator-name = "vdd_int";
+				regulator-name = "VDD_INT";
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <1050000>;
 				regulator-always-on;
@@ -454,7 +454,7 @@
 			};
 
 			buck4_reg: BUCK4 {
-				regulator-name = "vdd_g3d";
+				regulator-name = "VDD_G3D";
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <1100000>;
 				regulator-microvolt-offset = <50000>;
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index ecd14b283a6b..dc865be40751 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -363,7 +363,7 @@
 			};
 
 			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
+				regulator-name = "VDD_MIF";
 				regulator-min-microvolt = <950000>;
 				regulator-max-microvolt	= <1100000>;
 				regulator-always-on;
@@ -372,7 +372,7 @@
 			};
 
 			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
+				regulator-name = "VDD_ARM";
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt	= <1350000>;
 				regulator-always-on;
@@ -381,7 +381,7 @@
 			};
 
 			buck3_reg: BUCK3 {
-				regulator-name = "vdd_int";
+				regulator-name = "VDD_INT";
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt	= <1200000>;
 				regulator-always-on;
@@ -390,7 +390,7 @@
 			};
 
 			buck4_reg: BUCK4 {
-				regulator-name = "vdd_g3d";
+				regulator-name = "VDD_G3D";
 				regulator-min-microvolt = <750000>;
 				regulator-max-microvolt	= <1500000>;
 				regulator-always-on;
@@ -399,7 +399,7 @@
 			};
 
 			buck5_reg: BUCK5 {
-				regulator-name = "vdd_m12";
+				regulator-name = "VDD_M12";
 				regulator-min-microvolt = <750000>;
 				regulator-max-microvolt	= <1500000>;
 				regulator-always-on;
@@ -408,7 +408,7 @@
 			};
 
 			buck6_reg: BUCK6 {
-				regulator-name = "vdd12_5m";
+				regulator-name = "VDD12_5M";
 				regulator-min-microvolt = <750000>;
 				regulator-max-microvolt	= <1500000>;
 				regulator-always-on;
@@ -417,7 +417,7 @@
 			};
 
 			buck9_reg: BUCK9 {
-				regulator-name = "vddf28_emmc";
+				regulator-name = "VDDF28_EMMC";
 				regulator-min-microvolt = <750000>;
 				regulator-max-microvolt	= <3000000>;
 				regulator-always-on;
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 6904091d4837..c4cc7611898c 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -454,7 +454,7 @@
 			};
 
 			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
+				regulator-name = "VDD_MIF";
 				regulator-min-microvolt = <950000>;
 				regulator-max-microvolt = <1200000>;
 				regulator-always-on;
@@ -463,7 +463,7 @@
 			};
 
 			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
+				regulator-name = "VDD_ARM";
 				regulator-min-microvolt = <912500>;
 				regulator-max-microvolt = <1300000>;
 				regulator-always-on;
@@ -472,7 +472,7 @@
 			};
 
 			buck3_reg: BUCK3 {
-				regulator-name = "vdd_int";
+				regulator-name = "VDD_INT";
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <1200000>;
 				regulator-always-on;
@@ -481,7 +481,7 @@
 			};
 
 			buck4_reg: BUCK4 {
-				regulator-name = "vdd_g3d";
+				regulator-name = "VDD_G3D";
 				regulator-min-microvolt = <850000>;
 				regulator-max-microvolt = <1300000>;
 				regulator-always-on;
@@ -641,9 +641,8 @@
 		pinctrl-0 = <&i2c2_gpio_bus>;
 		status = "okay";
 		compatible = "i2c-gpio";
-		gpios = <&gpa0 6 0 /* sda */
-			 &gpa0 7 0 /* scl */
-			>;
+		sda-gpios = <&gpa0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpa0 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		i2c-gpio,delay-us = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index e9a09dd0a49b..dd7f8385d81e 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -673,7 +673,7 @@
 			};
 
 			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
+				regulator-name = "PVDD_ARM_1V0";
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <1500000>;
 				regulator-always-on;
diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi
index 8ff70b856334..cf858029292e 100644
--- a/arch/arm/boot/dts/s5pv210-aries.dtsi
+++ b/arch/arm/boot/dts/s5pv210-aries.dtsi
@@ -11,9 +11,15 @@
 / {
 	compatible = "samsung,aries", "samsung,s5pv210";
 
-	aliases {
+	aliases: aliases {
+		i2c4 = &i2c_sound;
+		i2c5 = &i2c_accel;
 		i2c6 = &i2c_pmic;
+		i2c7 = &i2c_musb;
 		i2c9 = &i2c_fuel;
+		i2c10 = &i2c_touchkey;
+		i2c11 = &i2c_prox;
+		i2c12 = &i2c_magnetometer;
 	};
 
 	memory@30000000 {
@@ -46,6 +52,21 @@
 		regulator-name = "vibrator-en";
 		enable-active-high;
 		gpio = <&gpj1 1 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctr-0 = <&vibrator_ena>;
+	};
+
+	touchkey_vdd: regulator-fixed-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VTOUCH_3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpj3 2 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchkey_vdd_ena>;
 	};
 
 	wifi_pwrseq: wifi-pwrseq {
@@ -57,7 +78,71 @@
 		power-off-delay-us = <500>;
 	};
 
-	i2c_pmic: i2c-gpio-0 {
+	i2c_sound: i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&mp05 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&mp05 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sound_i2c_pins>;
+
+		wm8994: wm8994@1a {
+			compatible = "wlf,wm8994";
+			reg = <0x1a>;
+
+			#sound-dai-cells = <0>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			clocks = <&clocks MOUT_CLKOUT>;
+			clock-names = "MCLK1";
+
+			AVDD2-supply = <&buck3_reg>;
+			DBVDD-supply = <&buck3_reg>;
+			CPVDD-supply = <&buck3_reg>;
+			SPKVDD1-supply = <&buck3_reg>;
+			SPKVDD2-supply = <&buck3_reg>;
+
+			wlf,gpio-cfg = <0xa101 0x8100 0x0100 0x0100 0x8100
+					0xa101 0x0100 0x8100 0x0100 0x0100
+					0x0100>;
+
+			wlf,ldo1ena = <&gpf3 4 GPIO_ACTIVE_HIGH>;
+			wlf,ldo2ena = <&gpf3 4 GPIO_ACTIVE_HIGH>;
+
+			wlf,lineout1-se;
+			wlf,lineout2-se;
+
+			assigned-clocks = <&clocks MOUT_CLKOUT>;
+			assigned-clock-rates = <0>;
+			assigned-clock-parents = <&xusbxti>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&codec_ldo>;
+		};
+	};
+
+	i2c_accel: i2c-gpio-1 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpj3 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpj3 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&accel_i2c_pins>;
+
+		status = "disabled";
+
+		/* bma023 accelerometer, no mainline binding */
+	};
+
+	i2c_pmic: i2c-gpio-2 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpj4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpj4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -65,6 +150,9 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_i2c_pins>;
+
 		pmic@66 {
 			compatible = "maxim,max8998";
 			reg = <0x66>;
@@ -81,6 +169,9 @@
 			max8998,pmic-buck2-dvs-gpio = <&gph0 5 GPIO_ACTIVE_HIGH>;
 			max8998,pmic-buck2-dvs-voltage = <1100000>, <1000000>;
 
+			pinctrl-names = "default";
+			pinctrl-0 = <&pmic_dvs_pins &pmic_irq>;
+
 			regulators {
 				ldo2_reg: LDO2 {
 					regulator-name = "VALIVE_1.2V";
@@ -107,7 +198,6 @@
 					regulator-name = "VADC_3.3V";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
 
 					regulator-state-mem {
 						regulator-off-in-suspend;
@@ -134,8 +224,6 @@
 					regulator-name = "VLCD_1.8V";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
-					/* Till we get panel driver */
-					regulator-always-on;
 
 					regulator-state-mem {
 						regulator-off-in-suspend;
@@ -234,8 +322,6 @@
 					regulator-name = "VCC_3.0V_LCD";
 					regulator-min-microvolt = <3000000>;
 					regulator-max-microvolt = <3000000>;
-					/* Till we get panel driver */
-					regulator-always-on;
 
 					regulator-state-mem {
 						regulator-off-in-suspend;
@@ -306,7 +392,29 @@
 		};
 	};
 
-	i2c_fuel: i2c-gpio-1 {
+	i2c_musb: i2c-gpio-3 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpj3 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpj3 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&musb_i2c_pins>;
+
+		fsa9480: musb@25 {
+			compatible = "fcs,fsa9480";
+			reg = <0x25>;
+			interrupt-parent = <&gph2>;
+			interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&musb_irq>;
+		};
+	};
+
+	i2c_fuel: i2c-gpio-4 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&mp05 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&mp05 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -314,6 +422,9 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pinctrl-names = "default";
+		pinctrl-0 = <&fg_i2c_pins>;
+
 		fuelgauge@36 {
 			compatible = "maxim,max17040";
 			interrupt-parent = <&vic0>;
@@ -322,6 +433,64 @@
 		};
 	};
 
+	i2c_touchkey: i2c-gpio-5 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpj3 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpj3 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchkey_i2c_pins>;
+
+		touchkey@20 {
+			compatible = "cypress,aries-touchkey";
+			reg = <0x20>;
+			vdd-supply = <&touchkey_vdd>;
+			vcc-supply = <&buck3_reg>;
+			linux,keycodes = <KEY_MENU KEY_BACK
+					  KEY_HOMEPAGE KEY_SEARCH>;
+			interrupt-parent = <&gpj4>;
+			interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&touchkey_irq>;
+		};
+	};
+
+	i2c_prox: i2c-gpio-6 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpg2 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpg0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&prox_i2c_pins>;
+
+		status = "disabled";
+
+		/* Sharp gp2a prox/light sensor, incomplete mainline binding */
+	};
+
+	i2c_magnetometer: i2c-gpio-7 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpj0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpj0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&magnetometer_i2c_pins>;
+
+		status = "disabled";
+
+		/* Yamaha yas529 magnetometer, no mainline binding */
+	};
+
 	vibrator: pwm-vibrator {
 		compatible = "pwm-vibrator";
 		pwms = <&pwm 1 44642 0>;
@@ -337,6 +506,45 @@
 		offset = <0x681c>; /* PS_HOLD_CONTROL */
 		value = <0x5200>;
 	};
+
+	spi_lcd: spi-gpio-0 {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&mp04 1 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&mp04 3 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&mp01 1 GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_spi_pins>;
+
+		panel@0 {
+			compatible = "samsung,s6e63m0";
+			reg = <0>;
+			reset-gpios = <&mp05 5 GPIO_ACTIVE_LOW>;
+			vdd3-supply = <&ldo7_reg>;
+			vci-supply = <&ldo17_reg>;
+			spi-cs-high;
+			spi-max-frequency = <1200000>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&panel_rst>;
+
+			port {
+				lcd_ep: endpoint {
+					remote-endpoint = <&fimd_ep>;
+				};
+			};
+		};
+	};
+};
+
+&adc {
+	vdd-supply = <&ldo4_reg>;
+
+	status = "okay";
 };
 
 &fimd {
@@ -347,18 +555,13 @@
 	samsung,invert-vden;
 	samsung,invert-vclk;
 
-	display-timings {
-		timing-0 {
-			/* 480x800@60Hz */
-			clock-frequency = <25628040>;
-			hactive = <480>;
-			vactive = <800>;
-			hfront-porch = <16>;
-			hback-porch = <16>;
-			hsync-len = <2>;
-			vfront-porch = <28>;
-			vback-porch = <1>;
-			vsync-len = <2>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port@3 {
+		reg = <3>;
+		fimd_ep: endpoint {
+			remote-endpoint = <&lcd_ep>;
 		};
 	};
 };
@@ -399,12 +602,39 @@
 		samsung,pin-val = <1>;
 	};
 
+	codec_ldo: codec-ldo {
+		samsung,pins = "gpf3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	prox_i2c_pins: gp2a-i2c-pins {
+		samsung,pins = "gpg0-2", "gpg2-2";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
 	wlan_gpio_rst: wlan-gpio-rst {
 		samsung,pins = "gpg1-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
+	pmic_dvs_pins: pmic-dvs-pins {
+		samsung,pins = "gph0-3", "gph0-4", "gph0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-val = <0>;
+	};
+
+	pmic_irq: pmic-irq {
+		samsung,pins = "gph0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
 	wifi_host_wake: wifi-host-wake {
 		samsung,pins = "gph2-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
@@ -419,6 +649,13 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
+	musb_irq: musq-irq {
+		samsung,pins = "gph2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
 	tf_detect: tf-detect {
 		samsung,pins = "gph3-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
@@ -432,12 +669,85 @@
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
+	magnetometer_i2c_pins: yas529-i2c-pins {
+		samsung,pins = "gpj0-0", "gpj0-1";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
 	ts_irq: ts-irq {
 		samsung,pins = "gpj0-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
+
+	vibrator_ena: vibrator-ena {
+		samsung,pins = "gpj1-1";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	touchkey_i2c_pins: touchkey-i2c-pins {
+		samsung,pins = "gpj3-0", "gpj3-1";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	touchkey_vdd_ena: touchkey-vdd-ena {
+		samsung,pins = "gpj3-2";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	musb_i2c_pins: musb-i2c-pins {
+		samsung,pins = "gpj3-4", "gpj3-5";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	accel_i2c_pins: accel-i2c-pins {
+		samsung,pins = "gpj3-6", "gpj3-7";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pmic_i2c_pins: pmic-i2c-pins {
+		samsung,pins = "gpj4-0", "gpj4-3";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	touchkey_irq: touchkey-irq {
+		samsung,pins = "gpj4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	lcd_spi_pins: spi-lcd-pins {
+		samsung,pins = "mp01-1", "mp04-1", "mp04-3";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	fg_i2c_pins: fg-i2c-pins {
+		samsung,pins = "mp05-0", "mp05-1";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	sound_i2c_pins: sound-i2c-pins {
+		samsung,pins = "mp05-2", "mp05-3";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	panel_rst: panel-rst {
+		samsung,pins = "mp05-5";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
 };
 
 &pwm {
@@ -454,11 +764,16 @@
 	pinctrl-names = "default";
 	cap-sd-highspeed;
 	cap-mmc-highspeed;
+	keep-power-in-suspend;
 
 	mmc-pwrseq = <&wifi_pwrseq>;
 	non-removable;
 	status = "okay";
 
+	assigned-clocks = <&clocks MOUT_MMC1>, <&clocks SCLK_MMC1>;
+	assigned-clock-rates = <0>, <50000000>;
+	assigned-clock-parents = <&clocks MOUT_MPLL>;
+
 	wlan@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
@@ -475,6 +790,10 @@
 	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &tf_detect>;
 	pinctrl-names = "default";
 	status = "okay";
+
+	assigned-clocks = <&clocks MOUT_MMC2>, <&clocks SCLK_MMC2>;
+	assigned-clock-rates = <0>, <50000000>;
+	assigned-clock-parents = <&clocks MOUT_MPLL>;
 };
 
 &uart0 {
diff --git a/arch/arm/boot/dts/s5pv210-fascinate4g.dts b/arch/arm/boot/dts/s5pv210-fascinate4g.dts
index 07a8d9bbe5b8..5e1b81823a8d 100644
--- a/arch/arm/boot/dts/s5pv210-fascinate4g.dts
+++ b/arch/arm/boot/dts/s5pv210-fascinate4g.dts
@@ -36,3 +36,252 @@
 		};
 	};
 };
+
+&pinctrl0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep_cfg>;
+
+	/* Based on vendor kernel v2.6.35.7 */
+	sleep_cfg: sleep-cfg {
+		PIN_SLP(gpa0-0, PREV, NONE);
+		PIN_SLP(gpa0-1, PREV, NONE);
+		PIN_SLP(gpa0-2, PREV, NONE);
+		PIN_SLP(gpa0-3, OUT1, NONE);
+		PIN_SLP(gpa0-4, PREV, NONE);
+		PIN_SLP(gpa0-5, PREV, NONE);
+		PIN_SLP(gpa0-6, PREV, NONE);
+		PIN_SLP(gpa0-7, PREV, NONE);
+
+		PIN_SLP(gpa1-0, INPUT, DOWN);
+		PIN_SLP(gpa1-1, OUT0, NONE);
+		PIN_SLP(gpa1-2, INPUT, DOWN);
+		PIN_SLP(gpa1-3, OUT0, NONE);
+
+		PIN_SLP(gpb-0, OUT0, NONE);
+		PIN_SLP(gpb-1, OUT1, NONE);
+		PIN_SLP(gpb-2, OUT0, NONE);
+		PIN_SLP(gpb-3, PREV, NONE);
+		PIN_SLP(gpb-4, INPUT, NONE);
+		PIN_SLP(gpb-5, PREV, NONE);
+		PIN_SLP(gpb-6, INPUT, DOWN);
+		PIN_SLP(gpb-7, OUT0, NONE);
+
+		PIN_SLP(gpc0-0, OUT0, NONE);
+		PIN_SLP(gpc0-1, INPUT, DOWN);
+		PIN_SLP(gpc0-2, OUT0, NONE);
+		PIN_SLP(gpc0-3, INPUT, DOWN);
+		PIN_SLP(gpc0-4, OUT0, NONE);
+
+		PIN_SLP(gpc1-0, INPUT, DOWN);
+		PIN_SLP(gpc1-1, INPUT, DOWN);
+		PIN_SLP(gpc1-2, INPUT, DOWN);
+		PIN_SLP(gpc1-3, INPUT, DOWN);
+		PIN_SLP(gpc1-4, INPUT, DOWN);
+
+		PIN_SLP(gpd0-0, INPUT, DOWN);
+		PIN_SLP(gpd0-1, OUT0, NONE);
+		PIN_SLP(gpd0-2, INPUT, DOWN);
+		PIN_SLP(gpd0-3, INPUT, DOWN);
+
+		PIN_SLP(gpd1-0, INPUT, NONE);
+		PIN_SLP(gpd1-1, INPUT, NONE);
+		PIN_SLP(gpd1-2, INPUT, DOWN);
+		PIN_SLP(gpd1-3, INPUT, DOWN);
+		PIN_SLP(gpd1-4, INPUT, DOWN);
+		PIN_SLP(gpd1-5, INPUT, DOWN);
+
+		PIN_SLP(gpe0-0, INPUT, DOWN);
+		PIN_SLP(gpe0-1, INPUT, DOWN);
+		PIN_SLP(gpe0-2, INPUT, DOWN);
+		PIN_SLP(gpe0-3, INPUT, DOWN);
+		PIN_SLP(gpe0-4, INPUT, DOWN);
+		PIN_SLP(gpe0-5, INPUT, DOWN);
+		PIN_SLP(gpe0-6, INPUT, DOWN);
+		PIN_SLP(gpe0-7, INPUT, DOWN);
+
+		PIN_SLP(gpe1-0, INPUT, DOWN);
+		PIN_SLP(gpe1-1, INPUT, DOWN);
+		PIN_SLP(gpe1-2, INPUT, DOWN);
+		PIN_SLP(gpe1-3, OUT0, NONE);
+		PIN_SLP(gpe1-4, INPUT, DOWN);
+
+		PIN_SLP(gpf0-0, OUT0, NONE);
+		PIN_SLP(gpf0-1, OUT0, NONE);
+		PIN_SLP(gpf0-2, OUT0, NONE);
+		PIN_SLP(gpf0-3, OUT0, NONE);
+		PIN_SLP(gpf0-4, OUT0, NONE);
+		PIN_SLP(gpf0-5, OUT0, NONE);
+		PIN_SLP(gpf0-6, OUT0, NONE);
+		PIN_SLP(gpf0-7, OUT0, NONE);
+
+		PIN_SLP(gpf1-0, OUT0, NONE);
+		PIN_SLP(gpf1-1, OUT0, NONE);
+		PIN_SLP(gpf1-2, OUT0, NONE);
+		PIN_SLP(gpf1-3, OUT0, NONE);
+		PIN_SLP(gpf1-4, OUT0, NONE);
+		PIN_SLP(gpf1-5, OUT0, NONE);
+		PIN_SLP(gpf1-6, OUT0, NONE);
+		PIN_SLP(gpf1-7, OUT0, NONE);
+
+		PIN_SLP(gpf2-0, OUT0, NONE);
+		PIN_SLP(gpf2-1, OUT0, NONE);
+		PIN_SLP(gpf2-2, OUT0, NONE);
+		PIN_SLP(gpf2-3, OUT0, NONE);
+		PIN_SLP(gpf2-4, OUT0, NONE);
+		PIN_SLP(gpf2-5, OUT0, NONE);
+		PIN_SLP(gpf2-6, OUT0, NONE);
+		PIN_SLP(gpf2-7, OUT0, NONE);
+
+		PIN_SLP(gpf3-0, OUT0, NONE);
+		PIN_SLP(gpf3-1, OUT0, NONE);
+		PIN_SLP(gpf3-2, OUT0, NONE);
+		PIN_SLP(gpf3-3, OUT0, NONE);
+		PIN_SLP(gpf3-4, PREV, NONE);
+		PIN_SLP(gpf3-5, INPUT, DOWN);
+
+		PIN_SLP(gpg0-0, INPUT, DOWN);
+		PIN_SLP(gpg0-1, INPUT, DOWN);
+		PIN_SLP(gpg0-2, INPUT, NONE);
+		PIN_SLP(gpg0-3, INPUT, DOWN);
+		PIN_SLP(gpg0-4, INPUT, DOWN);
+		PIN_SLP(gpg0-5, INPUT, DOWN);
+		PIN_SLP(gpg0-6, INPUT, DOWN);
+
+		PIN_SLP(gpg1-0, OUT0, NONE);
+		PIN_SLP(gpg1-1, OUT1, NONE);
+		PIN_SLP(gpg1-2, PREV, NONE);
+		PIN_SLP(gpg1-3, OUT1, NONE);
+		PIN_SLP(gpg1-4, OUT1, NONE);
+		PIN_SLP(gpg1-5, OUT1, NONE);
+		PIN_SLP(gpg1-6, OUT1, NONE);
+
+		PIN_SLP(gpg2-0, OUT0, NONE);
+		PIN_SLP(gpg2-1, OUT0, NONE);
+		PIN_SLP(gpg2-2, INPUT, NONE);
+		PIN_SLP(gpg2-3, OUT0, NONE);
+		PIN_SLP(gpg2-4, OUT0, NONE);
+		PIN_SLP(gpg2-5, OUT0, NONE);
+		PIN_SLP(gpg2-6, OUT0, NONE);
+
+		PIN_SLP(gpg3-0, PREV, UP);
+		PIN_SLP(gpg3-1, PREV, UP);
+		PIN_SLP(gpg3-2, INPUT, NONE);
+		PIN_SLP(gpg3-3, INPUT, DOWN);
+		PIN_SLP(gpg3-4, OUT0, NONE);
+		PIN_SLP(gpg3-5, OUT0, NONE);
+		PIN_SLP(gpg3-6, INPUT, DOWN);
+
+		PIN_SLP(gpi-0, PREV, NONE);
+		PIN_SLP(gpi-1, INPUT, DOWN);
+		PIN_SLP(gpi-2, PREV, NONE);
+		PIN_SLP(gpi-3, PREV, NONE);
+		PIN_SLP(gpi-4, PREV, NONE);
+		PIN_SLP(gpi-5, INPUT, DOWN);
+		PIN_SLP(gpi-6, INPUT, DOWN);
+
+		PIN_SLP(gpj0-0, INPUT, NONE);
+		PIN_SLP(gpj0-1, INPUT, NONE);
+		PIN_SLP(gpj0-2, INPUT, NONE);
+		PIN_SLP(gpj0-3, INPUT, NONE);
+		PIN_SLP(gpj0-4, INPUT, NONE);
+		PIN_SLP(gpj0-5, INPUT, DOWN);
+		PIN_SLP(gpj0-6, OUT0, NONE);
+		PIN_SLP(gpj0-7, INPUT, NONE);
+
+		PIN_SLP(gpj1-0, OUT1, NONE);
+		PIN_SLP(gpj1-1, OUT0, NONE);
+		PIN_SLP(gpj1-2, INPUT, DOWN);
+		PIN_SLP(gpj1-3, PREV, NONE);
+		PIN_SLP(gpj1-4, PREV, NONE);
+		PIN_SLP(gpj1-5, OUT0, NONE);
+
+		PIN_SLP(gpj2-0, INPUT, DOWN);
+		PIN_SLP(gpj2-1, INPUT, DOWN);
+		PIN_SLP(gpj2-2, OUT0, NONE);
+		PIN_SLP(gpj2-3, INPUT, DOWN);
+		PIN_SLP(gpj2-4, INPUT, DOWN);
+		PIN_SLP(gpj2-5, PREV, NONE);
+		PIN_SLP(gpj2-6, PREV, NONE);
+		PIN_SLP(gpj2-7, INPUT, DOWN);
+
+		PIN_SLP(gpj3-0, INPUT, NONE);
+		PIN_SLP(gpj3-1, INPUT, NONE);
+		PIN_SLP(gpj3-2, OUT0, NONE);
+		PIN_SLP(gpj3-3, INPUT, DOWN);
+		PIN_SLP(gpj3-4, INPUT, NONE);
+		PIN_SLP(gpj3-5, INPUT, NONE);
+		PIN_SLP(gpj3-6, INPUT, NONE);
+		PIN_SLP(gpj3-7, INPUT, NONE);
+
+		PIN_SLP(gpj4-0, INPUT, NONE);
+		PIN_SLP(gpj4-1, INPUT, DOWN);
+		PIN_SLP(gpj4-2, PREV, NONE);
+		PIN_SLP(gpj4-3, INPUT, NONE);
+		PIN_SLP(gpj4-4, INPUT, DOWN);
+
+		PIN_SLP(mp01-0, OUT1, NONE);
+		PIN_SLP(mp01-1, OUT0, NONE);
+		PIN_SLP(mp01-2, INPUT, DOWN);
+		PIN_SLP(mp01-3, INPUT, DOWN);
+		PIN_SLP(mp01-4, OUT1, NONE);
+		PIN_SLP(mp01-5, INPUT, DOWN);
+		PIN_SLP(mp01-6, INPUT, DOWN);
+		PIN_SLP(mp01-7, INPUT, DOWN);
+
+		PIN_SLP(mp02-0, INPUT, DOWN);
+		PIN_SLP(mp02-1, INPUT, DOWN);
+		PIN_SLP(mp02-2, INPUT, NONE);
+		PIN_SLP(mp02-3, INPUT, DOWN);
+
+		PIN_SLP(mp03-0, INPUT, DOWN);
+		PIN_SLP(mp03-1, INPUT, DOWN);
+		PIN_SLP(mp03-2, OUT1, NONE);
+		PIN_SLP(mp03-3, OUT0, NONE);
+		PIN_SLP(mp03-4, INPUT, NONE);
+		PIN_SLP(mp03-5, OUT0, NONE);
+		PIN_SLP(mp03-6, INPUT, DOWN);
+		PIN_SLP(mp03-7, INPUT, DOWN);
+
+		PIN_SLP(mp04-0, INPUT, DOWN);
+		PIN_SLP(mp04-1, OUT0, NONE);
+		PIN_SLP(mp04-2, INPUT, DOWN);
+		PIN_SLP(mp04-3, OUT0, NONE);
+		PIN_SLP(mp04-4, INPUT, DOWN);
+		PIN_SLP(mp04-5, INPUT, DOWN);
+		PIN_SLP(mp04-6, OUT0, NONE);
+		PIN_SLP(mp04-7, INPUT, DOWN);
+
+		PIN_SLP(mp05-0, INPUT, NONE);
+		PIN_SLP(mp05-1, INPUT, NONE);
+		PIN_SLP(mp05-2, INPUT, NONE);
+		PIN_SLP(mp05-3, INPUT, NONE);
+		PIN_SLP(mp05-4, INPUT, DOWN);
+		PIN_SLP(mp05-5, OUT0, NONE);
+		PIN_SLP(mp05-6, INPUT, DOWN);
+		PIN_SLP(mp05-7, PREV, NONE);
+
+		PIN_SLP(mp06-0, INPUT, DOWN);
+		PIN_SLP(mp06-1, INPUT, DOWN);
+		PIN_SLP(mp06-2, INPUT, DOWN);
+		PIN_SLP(mp06-3, INPUT, DOWN);
+		PIN_SLP(mp06-4, INPUT, DOWN);
+		PIN_SLP(mp06-5, INPUT, DOWN);
+		PIN_SLP(mp06-6, INPUT, DOWN);
+		PIN_SLP(mp06-7, INPUT, DOWN);
+
+		PIN_SLP(mp07-0, INPUT, DOWN);
+		PIN_SLP(mp07-1, INPUT, DOWN);
+		PIN_SLP(mp07-2, INPUT, DOWN);
+		PIN_SLP(mp07-3, INPUT, DOWN);
+		PIN_SLP(mp07-4, INPUT, DOWN);
+		PIN_SLP(mp07-5, INPUT, DOWN);
+		PIN_SLP(mp07-6, INPUT, DOWN);
+		PIN_SLP(mp07-7, INPUT, DOWN);
+	};
+};
+
+&wm8994 {
+	/* GPIO3 (BCLK2) and GPIO4 (LRCLK2) as outputs */
+	wlf,gpio-cfg = <0xa101 0x8100 0x8100 0x8100 0x8100 0xa101
+			0x0100 0x8100 0x0100 0x0100 0x0100>;
+};
diff --git a/arch/arm/boot/dts/s5pv210-galaxys.dts b/arch/arm/boot/dts/s5pv210-galaxys.dts
index cf161bbfbacf..5d10dd67eacc 100644
--- a/arch/arm/boot/dts/s5pv210-galaxys.dts
+++ b/arch/arm/boot/dts/s5pv210-galaxys.dts
@@ -49,15 +49,303 @@
 			wakeup-source;
 		};
 	};
+
+	i2c_fmradio: i2c-gpio-8 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpd1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpd1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&fm_i2c_pins>;
+
+		fmradio@10 {
+			compatible = "silabs,si470x";
+			reg = <0x10>;
+			interrupt-parent = <&gpj2>;
+			interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&gpj2 5 GPIO_ACTIVE_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&fm_irq &fm_rst>;
+		};
+	};
+};
+
+&aliases {
+	i2c8 = &i2c_fmradio;
 };
 
 &pinctrl0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep_cfg>;
+
+	fm_i2c_pins: fm-i2c-pins {
+		samsung,pins = "gpd1-2", "gpd1-3";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	fm_irq: fm-irq {
+		samsung,pins = "gpj2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	fm_rst: fm-rst {
+		samsung,pins = "gpj2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
 	massmemory_en: massmemory-en {
 		samsung,pins = "gpj2-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
+
+	/* Based on CyanogenMod 3.0.101 kernel */
+	sleep_cfg: sleep-cfg {
+		PIN_SLP(gpa0-0, PREV, NONE);
+		PIN_SLP(gpa0-1, PREV, NONE);
+		PIN_SLP(gpa0-2, PREV, NONE);
+		PIN_SLP(gpa0-3, OUT1, NONE);
+		PIN_SLP(gpa0-4, INPUT, DOWN);
+		PIN_SLP(gpa0-5, OUT0, NONE);
+		PIN_SLP(gpa0-6, INPUT, DOWN);
+		PIN_SLP(gpa0-7, OUT1, NONE);
+
+		PIN_SLP(gpa1-0, INPUT, DOWN);
+		PIN_SLP(gpa1-1, OUT0, NONE);
+		PIN_SLP(gpa1-2, INPUT, NONE);
+		PIN_SLP(gpa1-3, OUT0, NONE);
+
+		PIN_SLP(gpb-0, OUT0, NONE);
+		PIN_SLP(gpb-1, OUT1, NONE);
+		PIN_SLP(gpb-2, OUT0, NONE);
+		PIN_SLP(gpb-3, PREV, NONE);
+		PIN_SLP(gpb-4, INPUT, NONE);
+		PIN_SLP(gpb-5, PREV, NONE);
+		PIN_SLP(gpb-6, INPUT, DOWN);
+		PIN_SLP(gpb-7, OUT0, NONE);
+
+		PIN_SLP(gpc0-0, OUT0, NONE);
+		PIN_SLP(gpc0-1, INPUT, DOWN);
+		PIN_SLP(gpc0-2, OUT0, NONE);
+		PIN_SLP(gpc0-3, INPUT, NONE);
+		PIN_SLP(gpc0-4, OUT0, NONE);
+
+		PIN_SLP(gpc1-0, INPUT, DOWN);
+		PIN_SLP(gpc1-1, INPUT, DOWN);
+		PIN_SLP(gpc1-2, INPUT, DOWN);
+		PIN_SLP(gpc1-3, INPUT, DOWN);
+		PIN_SLP(gpc1-4, INPUT, DOWN);
+
+		PIN_SLP(gpd0-0, INPUT, DOWN);
+		PIN_SLP(gpd0-1, OUT0, NONE);
+		PIN_SLP(gpd0-2, INPUT, DOWN);
+		PIN_SLP(gpd0-3, INPUT, DOWN);
+
+		PIN_SLP(gpd1-0, INPUT, NONE);
+		PIN_SLP(gpd1-1, INPUT, NONE);
+		PIN_SLP(gpd1-2, INPUT, NONE);
+		PIN_SLP(gpd1-3, INPUT, NONE);
+		PIN_SLP(gpd1-4, INPUT, DOWN);
+		PIN_SLP(gpd1-5, INPUT, DOWN);
+
+		PIN_SLP(gpe0-0, INPUT, DOWN);
+		PIN_SLP(gpe0-1, INPUT, DOWN);
+		PIN_SLP(gpe0-2, INPUT, DOWN);
+		PIN_SLP(gpe0-3, INPUT, DOWN);
+		PIN_SLP(gpe0-4, INPUT, DOWN);
+		PIN_SLP(gpe0-5, INPUT, DOWN);
+		PIN_SLP(gpe0-6, INPUT, DOWN);
+		PIN_SLP(gpe0-7, INPUT, DOWN);
+
+		PIN_SLP(gpe1-0, INPUT, DOWN);
+		PIN_SLP(gpe1-1, INPUT, DOWN);
+		PIN_SLP(gpe1-2, INPUT, DOWN);
+		PIN_SLP(gpe1-3, OUT0, NONE);
+		PIN_SLP(gpe1-4, INPUT, DOWN);
+
+		PIN_SLP(gpf0-0, OUT0, NONE);
+		PIN_SLP(gpf0-1, OUT0, NONE);
+		PIN_SLP(gpf0-2, OUT0, NONE);
+		PIN_SLP(gpf0-3, OUT0, NONE);
+		PIN_SLP(gpf0-4, OUT0, NONE);
+		PIN_SLP(gpf0-5, OUT0, NONE);
+		PIN_SLP(gpf0-6, OUT0, NONE);
+		PIN_SLP(gpf0-7, OUT0, NONE);
+
+		PIN_SLP(gpf1-0, OUT0, NONE);
+		PIN_SLP(gpf1-1, OUT0, NONE);
+		PIN_SLP(gpf1-2, OUT0, NONE);
+		PIN_SLP(gpf1-3, OUT0, NONE);
+		PIN_SLP(gpf1-4, OUT0, NONE);
+		PIN_SLP(gpf1-5, OUT0, NONE);
+		PIN_SLP(gpf1-6, OUT0, NONE);
+		PIN_SLP(gpf1-7, OUT0, NONE);
+
+		PIN_SLP(gpf2-0, OUT0, NONE);
+		PIN_SLP(gpf2-1, OUT0, NONE);
+		PIN_SLP(gpf2-2, OUT0, NONE);
+		PIN_SLP(gpf2-3, OUT0, NONE);
+		PIN_SLP(gpf2-4, OUT0, NONE);
+		PIN_SLP(gpf2-5, OUT0, NONE);
+		PIN_SLP(gpf2-6, OUT0, NONE);
+		PIN_SLP(gpf2-7, OUT0, NONE);
+
+		PIN_SLP(gpf3-0, OUT0, NONE);
+		PIN_SLP(gpf3-1, OUT0, NONE);
+		PIN_SLP(gpf3-2, OUT0, NONE);
+		PIN_SLP(gpf3-3, OUT0, NONE);
+		PIN_SLP(gpf3-4, PREV, NONE);
+		PIN_SLP(gpf3-5, INPUT, DOWN);
+
+		PIN_SLP(gpg0-0, OUT0, NONE);
+		PIN_SLP(gpg0-1, INPUT, NONE);
+		PIN_SLP(gpg0-2, INPUT, NONE);
+		PIN_SLP(gpg0-3, INPUT, NONE);
+		PIN_SLP(gpg0-4, INPUT, NONE);
+		PIN_SLP(gpg0-5, INPUT, NONE);
+		PIN_SLP(gpg0-6, INPUT, NONE);
+
+		PIN_SLP(gpg1-0, OUT0, NONE);
+		PIN_SLP(gpg1-1, OUT1, NONE);
+		PIN_SLP(gpg1-2, PREV, NONE);
+		PIN_SLP(gpg1-3, OUT1, NONE);
+		PIN_SLP(gpg1-4, OUT1, NONE);
+		PIN_SLP(gpg1-5, OUT1, NONE);
+		PIN_SLP(gpg1-6, OUT1, NONE);
+
+		PIN_SLP(gpg2-0, OUT0, NONE);
+		PIN_SLP(gpg2-1, OUT0, NONE);
+		PIN_SLP(gpg2-2, INPUT, NONE);
+		PIN_SLP(gpg2-3, OUT0, NONE);
+		PIN_SLP(gpg2-4, OUT0, NONE);
+		PIN_SLP(gpg2-5, OUT0, NONE);
+		PIN_SLP(gpg2-6, OUT0, NONE);
+
+		PIN_SLP(gpg3-0, OUT1, NONE);
+		PIN_SLP(gpg3-1, OUT0, NONE);
+		PIN_SLP(gpg3-2, INPUT, NONE);
+		PIN_SLP(gpg3-3, INPUT, DOWN);
+		PIN_SLP(gpg3-4, OUT0, NONE);
+		PIN_SLP(gpg3-5, OUT0, NONE);
+		PIN_SLP(gpg3-6, INPUT, DOWN);
+
+		PIN_SLP(gpi-0, PREV, NONE);
+		PIN_SLP(gpi-1, INPUT, DOWN);
+		PIN_SLP(gpi-2, PREV, NONE);
+		PIN_SLP(gpi-3, PREV, NONE);
+		PIN_SLP(gpi-4, PREV, NONE);
+		PIN_SLP(gpi-5, INPUT, DOWN);
+		PIN_SLP(gpi-6, INPUT, DOWN);
+
+		PIN_SLP(gpj0-0, INPUT, NONE);
+		PIN_SLP(gpj0-1, INPUT, NONE);
+		PIN_SLP(gpj0-2, INPUT, NONE);
+		PIN_SLP(gpj0-3, INPUT, NONE);
+		PIN_SLP(gpj0-4, INPUT, NONE);
+		PIN_SLP(gpj0-5, INPUT, DOWN);
+		PIN_SLP(gpj0-6, OUT0, NONE);
+		PIN_SLP(gpj0-7, INPUT, NONE);
+
+		PIN_SLP(gpj1-0, INPUT, DOWN);
+		PIN_SLP(gpj1-1, OUT0, NONE);
+		PIN_SLP(gpj1-2, INPUT, DOWN);
+		PIN_SLP(gpj1-3, PREV, NONE);
+		PIN_SLP(gpj1-4, PREV, NONE);
+		PIN_SLP(gpj1-5, OUT0, NONE);
+
+		PIN_SLP(gpj2-0, INPUT, DOWN);
+		PIN_SLP(gpj2-1, INPUT, DOWN);
+		PIN_SLP(gpj2-2, OUT0, NONE);
+		PIN_SLP(gpj2-3, INPUT, DOWN);
+		PIN_SLP(gpj2-4, INPUT, UP);
+		PIN_SLP(gpj2-5, PREV, NONE);
+		PIN_SLP(gpj2-6, PREV, NONE);
+		PIN_SLP(gpj2-7, OUT1, NONE);
+
+		PIN_SLP(gpj3-0, INPUT, NONE);
+		PIN_SLP(gpj3-1, INPUT, NONE);
+		PIN_SLP(gpj3-2, OUT0, NONE);
+		PIN_SLP(gpj3-3, INPUT, DOWN);
+		PIN_SLP(gpj3-4, INPUT, NONE);
+		PIN_SLP(gpj3-5, INPUT, NONE);
+		PIN_SLP(gpj3-6, INPUT, NONE);
+		PIN_SLP(gpj3-7, INPUT, NONE);
+
+		PIN_SLP(gpj4-0, INPUT, NONE);
+		PIN_SLP(gpj4-1, INPUT, DOWN);
+		PIN_SLP(gpj4-2, PREV, NONE);
+		PIN_SLP(gpj4-3, INPUT, NONE);
+		PIN_SLP(gpj4-4, INPUT, DOWN);
+
+		PIN_SLP(mp01-0, INPUT, DOWN);
+		PIN_SLP(mp01-1, OUT0, NONE);
+		PIN_SLP(mp01-2, INPUT, DOWN);
+		PIN_SLP(mp01-3, INPUT, DOWN);
+		PIN_SLP(mp01-4, OUT1, NONE);
+		PIN_SLP(mp01-5, INPUT, DOWN);
+		PIN_SLP(mp01-6, INPUT, DOWN);
+		PIN_SLP(mp01-7, INPUT, DOWN);
+
+		PIN_SLP(mp02-0, INPUT, DOWN);
+		PIN_SLP(mp02-1, INPUT, DOWN);
+		PIN_SLP(mp02-2, INPUT, NONE);
+		PIN_SLP(mp02-3, INPUT, DOWN);
+
+		PIN_SLP(mp03-0, INPUT, DOWN);
+		PIN_SLP(mp03-1, INPUT, DOWN);
+		PIN_SLP(mp03-2, OUT1, NONE);
+		PIN_SLP(mp03-3, OUT0, NONE);
+		PIN_SLP(mp03-4, INPUT, NONE);
+		PIN_SLP(mp03-5, OUT1, NONE);
+		PIN_SLP(mp03-6, INPUT, DOWN);
+		PIN_SLP(mp03-7, INPUT, DOWN);
+
+		PIN_SLP(mp04-0, INPUT, DOWN);
+		PIN_SLP(mp04-1, OUT0, NONE);
+		PIN_SLP(mp04-2, INPUT, DOWN);
+		PIN_SLP(mp04-3, OUT0, NONE);
+		PIN_SLP(mp04-4, INPUT, DOWN);
+		PIN_SLP(mp04-5, INPUT, DOWN);
+		PIN_SLP(mp04-6, OUT0, NONE);
+		PIN_SLP(mp04-7, INPUT, DOWN);
+
+		PIN_SLP(mp05-0, INPUT, NONE);
+		PIN_SLP(mp05-1, INPUT, NONE);
+		PIN_SLP(mp05-2, INPUT, NONE);
+		PIN_SLP(mp05-3, INPUT, NONE);
+		PIN_SLP(mp05-4, INPUT, DOWN);
+		PIN_SLP(mp05-5, OUT0, NONE);
+		PIN_SLP(mp05-6, INPUT, DOWN);
+		PIN_SLP(mp05-7, PREV, NONE);
+
+		PIN_SLP(mp06-0, INPUT, DOWN);
+		PIN_SLP(mp06-1, INPUT, DOWN);
+		PIN_SLP(mp06-2, INPUT, DOWN);
+		PIN_SLP(mp06-3, INPUT, DOWN);
+		PIN_SLP(mp06-4, INPUT, DOWN);
+		PIN_SLP(mp06-5, INPUT, DOWN);
+		PIN_SLP(mp06-6, INPUT, DOWN);
+		PIN_SLP(mp06-7, INPUT, DOWN);
+
+		PIN_SLP(mp07-0, INPUT, DOWN);
+		PIN_SLP(mp07-1, INPUT, DOWN);
+		PIN_SLP(mp07-2, INPUT, DOWN);
+		PIN_SLP(mp07-3, INPUT, DOWN);
+		PIN_SLP(mp07-4, INPUT, DOWN);
+		PIN_SLP(mp07-5, INPUT, DOWN);
+		PIN_SLP(mp07-6, INPUT, DOWN);
+		PIN_SLP(mp07-7, INPUT, DOWN);
+	};
 };
 
 &sdhci0 {
@@ -67,4 +355,8 @@
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4>;
 	pinctrl-names = "default";
 	status = "okay";
+
+	assigned-clocks = <&clocks MOUT_MMC0>, <&clocks SCLK_MMC0>;
+	assigned-clock-rates = <0>, <52000000>;
+	assigned-clock-parents = <&clocks MOUT_MPLL>;
 };
diff --git a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
index 7f0c9d447871..5e8b66281f01 100644
--- a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
+++ b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
@@ -18,6 +18,13 @@
 
 #include <dt-bindings/pinctrl/samsung.h>
 
+#define PIN_SLP(_pin, _mode, _pull)					\
+	_pin {								\
+		samsung,pins = #_pin;					\
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_ ##_mode>;	\
+		samsung,pin-pud-pdn = <S3C64XX_PIN_PULL_ ##_pull>;	\
+	}
+
 &pinctrl0 {
 	gpa0: gpa0 {
 		gpio-controller;
@@ -195,7 +202,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpgi: gpgi {
+	gpi: gpi {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
index 2ad642f51fd9..1b0ee884e91d 100644
--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -159,6 +159,18 @@
 			};
 		};
 
+		adc: adc@e1700000 {
+			compatible = "samsung,s5pv210-adc";
+			reg = <0xe1700000 0x1000>;
+			interrupt-parent = <&vic2>;
+			interrupts = <23>, <24>;
+			clocks = <&clocks CLK_TSADC>;
+			clock-names = "adc";
+			#io-channel-cells = <1>;
+			io-channel-ranges;
+			status = "disabled";
+		};
+
 		spi0: spi@e1300000 {
 			compatible = "samsung,s5pv210-spi";
 			reg = <0xe1300000 0x1000>;
@@ -614,7 +626,7 @@
 				clock-names = "fimc",
 						"sclk_fimc";
 				samsung,pix-limits = <4224 8192 1920 4224>;
-				samsung,mainscaler-ext;
+				samsung,min-pix-alignment = <16 8>;
 				samsung,cam-if;
 			};
 
@@ -628,8 +640,10 @@
 				clock-names = "fimc",
 						"sclk_fimc";
 				samsung,pix-limits = <4224 8192 1920 4224>;
+				samsung,min-pix-alignment = <1 1>;
 				samsung,mainscaler-ext;
 				samsung,cam-if;
+				samsung,lcd-wb;
 			};
 
 			fimc2: fimc@fb400000 {
@@ -641,9 +655,10 @@
 						<&clocks SCLK_FIMC2>;
 				clock-names = "fimc",
 						"sclk_fimc";
-				samsung,pix-limits = <4224 8192 1920 4224>;
-				samsung,mainscaler-ext;
-				samsung,lcd-wb;
+				samsung,pix-limits = <1920 8192 1280 1920>;
+				samsung,min-pix-alignment = <16 8>;
+				samsung,rotators = <0>;
+				samsung,cam-if;
 			};
 		};