ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 755 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/ti/omap/omap5-board-common.dtsi b/arch/arm/boot/dts/ti/omap/omap5-board-common.dtsi
new file mode 100644
index 000000000000..6f46f1ecf1e5
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/omap5-board-common.dtsi
@@ -0,0 +1,755 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
+ */
+#include "omap5.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	aliases {
+		display0 = &hdmi0;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	vmain: fixedregulator-vmain {
+		compatible = "regulator-fixed";
+		regulator-name = "vmain";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vsys_cobra: fixedregulator-vsys_cobra {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_cobra";
+		vin-supply = <&vmain>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vmmcsd_fixed: fixedregulator-mmcsd {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+	mmc3_pwrseq: sdhci0_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&clk32kgaudio>;
+		clock-names = "ext_clock";
+	};
+
+	vmmcsdio_fixed: fixedregulator-mmcsdio {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsdio_fixed";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio5 12 GPIO_ACTIVE_HIGH>;	/* gpio140 WLAN_EN */
+		enable-active-high;
+		startup-delay-us = <70000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_pins>;
+	};
+
+	/* HS USB Host PHY on PORT 2 */
+	hsusb2_phy: hsusb2-phy-pins {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */
+		clocks = <&auxclk1_ck>;
+		clock-names = "main_clk";
+		clock-frequency = <19200000>;
+		#phy-cells = <0>;
+	};
+
+	/* HS USB Host PHY on PORT 3 */
+	hsusb3_phy: hsusb3_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */
+		#phy-cells = <0>;
+	};
+
+	tpd12s015: encoder {
+		compatible = "ti,tpd12s015";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tpd12s015_pins>;
+
+		/* gpios defined in the board specific dts */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	hdmi0: connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "b";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
+
+	sound: sound {
+		compatible = "ti,abe-twl6040";
+		ti,model = "omap5-uevm";
+
+		ti,jack-detection;
+		ti,mclk-freq = <19200000>;
+
+		ti,mcpdm = <&mcpdm>;
+
+		ti,twl6040 = <&twl6040>;
+
+		/* Audio routing */
+		ti,audio-routing =
+			"Headset Stereophone", "HSOL",
+			"Headset Stereophone", "HSOR",
+			"Line Out", "AUXL",
+			"Line Out", "AUXR",
+			"HSMIC", "Headset Mic",
+			"Headset Mic", "Headset Mic Bias",
+			"AFML", "Line In",
+			"AFMR", "Line In";
+	};
+};
+
+&gpio8 {
+	/* TI trees use GPIO instead of msecure, see also muxing */
+	msecure-hog {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "gpio8_234/msecure";
+	};
+};
+
+&omap5_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&usbhost_pins
+			&led_gpio_pins
+	>;
+
+	twl6040_pins: twl6040-pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE6)	/* mcspi1_somi.gpio5_141 */
+		>;
+	};
+
+	mcpdm_pins: mcpdm-pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x182, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
+			OMAP5_IOPAD(0x19c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_ul_data.abemcpdm_ul_data */
+			OMAP5_IOPAD(0x19e, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_dl_data.abemcpdm_dl_data */
+			OMAP5_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE0)	/* abemcpdm_frame.abemcpdm_frame */
+			OMAP5_IOPAD(0x1a2, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_lb_clk.abemcpdm_lb_clk */
+		>;
+	};
+
+	mcbsp1_pins: mcbsp1-pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x18c, PIN_INPUT | MUX_MODE1)		/* abedmic_clk2.abemcbsp1_fsx */
+			OMAP5_IOPAD(0x18e, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* abedmic_clk3.abemcbsp1_dx */
+			OMAP5_IOPAD(0x190, PIN_INPUT | MUX_MODE1)		/* abeslimbus1_clock.abemcbsp1_clkx */
+			OMAP5_IOPAD(0x192, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* abeslimbus1_data.abemcbsp1_dr */
+		>;
+	};
+
+	mcbsp2_pins: mcbsp2-pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x194, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcbsp2_dr.abemcbsp2_dr */
+			OMAP5_IOPAD(0x196, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abemcbsp2_dx.abemcbsp2_dx */
+			OMAP5_IOPAD(0x198, PIN_INPUT | MUX_MODE0)		/* abemcbsp2_fsx.abemcbsp2_fsx */
+			OMAP5_IOPAD(0x19a, PIN_INPUT | MUX_MODE0)		/* abemcbsp2_clkx.abemcbsp2_clkx */
+		>;
+	};
+
+	i2c1_pins: i2c1-pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x1f2, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
+			OMAP5_IOPAD(0x1f4, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
+		>;
+	};
+
+	mcspi2_pins: mcspi2-pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0)		/*  mcspi2_clk */
+			OMAP5_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0)		/*  mcspi2_simo */
+			OMAP5_IOPAD(0x100, PIN_INPUT_PULLUP | MUX_MODE0)	/*  mcspi2_somi */
+			OMAP5_IOPAD(0x102, PIN_OUTPUT | MUX_MODE0)		/*  mcspi2_cs0 */
+		>;
+	};
+
+	mcspi3_pins: mcspi3-pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x0b8, PIN_INPUT | MUX_MODE1)		/*  mcspi3_somi */
+			OMAP5_IOPAD(0x0ba, PIN_INPUT | MUX_MODE1)		/*  mcspi3_cs0 */
+			OMAP5_IOPAD(0x0bc, PIN_INPUT | MUX_MODE1)		/*  mcspi3_simo */
+			OMAP5_IOPAD(0x0be, PIN_INPUT | MUX_MODE1)		/*  mcspi3_clk */
+		>;
+	};
+
+	mmc3_pins: mmc3-pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x01a4, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_clk */
+			OMAP5_IOPAD(0x01a6, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_cmd */
+			OMAP5_IOPAD(0x01a8, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data0 */
+			OMAP5_IOPAD(0x01aa, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data1 */
+			OMAP5_IOPAD(0x01ac, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data2 */
+			OMAP5_IOPAD(0x01ae, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data3 */
+		>;
+	};
+
+	wlan_pins: wlan-pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE6) /* mcspi1_clk.gpio5_140 */
+		>;
+	};
+
+	/* TI trees use GPIO mode; msecure mode does not work reliably? */
+	palmas_msecure_pins: palmas-msecure-pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x180, PIN_OUTPUT | MUX_MODE6) /* gpio8_234 */
+		>;
+	};
+
+	usbhost_pins: usbhost-pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x0c4, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
+			OMAP5_IOPAD(0x0c6, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */
+
+			OMAP5_IOPAD(0x1de, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */
+			OMAP5_IOPAD(0x1e0, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */
+
+			OMAP5_IOPAD(0x0b0, PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */
+			OMAP5_IOPAD(0x0ae, PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */
+		>;
+	};
+
+	led_gpio_pins: led-gpio-pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x1d6, PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */
+		>;
+	};
+
+	uart1_pins: uart1-pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x0a0, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */
+			OMAP5_IOPAD(0x0a2, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */
+			OMAP5_IOPAD(0x0a4, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */
+			OMAP5_IOPAD(0x0a6, PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */
+		>;
+	};
+
+	uart3_pins: uart3-pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x1da, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */
+			OMAP5_IOPAD(0x1dc, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */
+		>;
+	};
+
+	uart5_pins: uart5-pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x1b0, PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */
+			OMAP5_IOPAD(0x1b2, PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */
+			OMAP5_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */
+			OMAP5_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */
+		>;
+	};
+
+	dss_hdmi_pins: dss-hdmi-pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x13c, PIN_INPUT | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+			OMAP5_IOPAD(0x140, PIN_INPUT | MUX_MODE0)	/* hdmi_ddc_scl.hdmi_ddc_scl */
+			OMAP5_IOPAD(0x142, PIN_INPUT | MUX_MODE0)	/* hdmi_ddc_sda.hdmi_ddc_sda */
+		>;
+	};
+
+	tpd12s015_pins: tpd12s015-pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x13e, PIN_INPUT_PULLDOWN | MUX_MODE6)	/* hdmi_hpd.gpio7_193 */
+		>;
+	};
+};
+
+&omap5_pmx_wkup {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&usbhost_wkup_pins
+	>;
+
+	palmas_sys_nirq_pins: palmas-sys-nirq-pins {
+		pinctrl-single,pins = <
+			/* sys_nirq1 is pulled down as the SoC is inverting it for GIC */
+			OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0)
+		>;
+	};
+
+	usbhost_wkup_pins: usbhost-wkup-pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */
+		>;
+	};
+
+	wlcore_irq_pin: wlcore-irq-pin-pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x40, PIN_INPUT | MUX_MODE6)	/* llia_wakereqin.gpio1_wk14 */
+		>;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&ldo9_reg>;
+	bus-width = <4>;
+};
+
+&mmc2 {
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <8>;
+	ti,non-removable;
+};
+
+&mmc3 {
+	vmmc-supply = <&vmmcsdio_fixed>;
+	mmc-pwrseq = <&mmc3_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	cap-power-off-card;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins>;
+	interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
+			       &omap5_pmx_core 0x16a>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlcore_irq_pin>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;	/* gpio 14 */
+		ref-clock-frequency = <26000000>;
+	};
+};
+
+&mmc4 {
+	status = "disabled";
+};
+
+&mmc5 {
+	status = "disabled";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	clock-frequency = <400000>;
+
+	palmas: palmas@48 {
+		compatible = "ti,palmas";
+		/* sys_nirq/ext_sys_irq pins get inverted at mpuss wakeupgen */
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x48>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,system-power-controller;
+		ti,mux-pad1 = <0xa1>;
+		ti,mux-pad2 = <0x1b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&palmas_sys_nirq_pins &palmas_msecure_pins>;
+
+		palmas_gpio: gpio {
+			compatible = "ti,palmas-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		extcon_usb3: palmas_usb {
+			compatible = "ti,palmas-usb-vid";
+			ti,enable-vbus-detection;
+			ti,enable-id-detection;
+			ti,wakeup;
+			id-gpios = <&palmas_gpio 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		clk32kgaudio: palmas_clk32k@1 {
+			compatible = "ti,palmas-clk32kgaudio";
+			#clock-cells = <0>;
+		};
+
+		rtc {
+			compatible = "ti,palmas-rtc";
+			interrupt-parent = <&palmas>;
+			interrupts = <8 IRQ_TYPE_NONE>;
+			ti,backup-battery-chargeable;
+			ti,backup-battery-charge-high-current;
+		};
+
+		gpadc: gpadc {
+			compatible = "ti,palmas-gpadc";
+			interrupts = <18 0
+				      16 0
+				      17 0>;
+			#io-channel-cells = <1>;
+			ti,channel0-current-microamp = <5>;
+			ti,channel3-current-microamp = <10>;
+		};
+
+		palmas_pmic {
+			compatible = "ti,palmas-pmic";
+			interrupt-parent = <&palmas>;
+			interrupts = <14 IRQ_TYPE_NONE>;
+			interrupt-names = "short-irq";
+
+			ti,ldo6-vibrator;
+
+			smps123-in-supply = <&vsys_cobra>;
+			smps45-in-supply = <&vsys_cobra>;
+			smps6-in-supply = <&vsys_cobra>;
+			smps7-in-supply = <&vsys_cobra>;
+			smps8-in-supply = <&vsys_cobra>;
+			smps9-in-supply = <&vsys_cobra>;
+			smps10_out2-in-supply = <&vsys_cobra>;
+			smps10_out1-in-supply = <&vsys_cobra>;
+			ldo1-in-supply = <&vsys_cobra>;
+			ldo2-in-supply = <&vsys_cobra>;
+			ldo3-in-supply = <&vdds_1v8_main>;
+			ldo4-in-supply = <&vdds_1v8_main>;
+			ldo5-in-supply = <&vsys_cobra>;
+			ldo6-in-supply = <&vdds_1v8_main>;
+			ldo7-in-supply = <&vsys_cobra>;
+			ldo8-in-supply = <&vsys_cobra>;
+			ldo9-in-supply = <&vmmcsd_fixed>;
+			ldoln-in-supply = <&vsys_cobra>;
+			ldousb-in-supply = <&vsys_cobra>;
+
+			regulators {
+				smps123_reg: smps123 {
+					/* VDD_OPP_MPU */
+					regulator-name = "smps123";
+					regulator-min-microvolt = < 600000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps45_reg: smps45 {
+					/* VDD_OPP_MM */
+					regulator-name = "smps45";
+					regulator-min-microvolt = < 600000>;
+					regulator-max-microvolt = <1310000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps6_reg: smps6 {
+					/* VDD_DDR3 - over VDD_SMPS6 */
+					regulator-name = "smps6";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdds_1v8_main:
+				smps7_reg: smps7 {
+					/* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
+					regulator-name = "smps7";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps8_reg: smps8 {
+					/* VDD_OPP_CORE */
+					regulator-name = "smps8";
+					regulator-min-microvolt = < 600000>;
+					regulator-max-microvolt = <1310000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps9_reg: smps9 {
+					/* VDDA_2v1_AUD over VDD_2v1 */
+					regulator-name = "smps9";
+					regulator-min-microvolt = <2100000>;
+					regulator-max-microvolt = <2100000>;
+					ti,smps-range = <0x80>;
+				};
+
+				smps10_out2_reg: smps10_out2 {
+					/* VBUS_5V_OTG */
+					regulator-name = "smps10_out2";
+					regulator-min-microvolt = <5000000>;
+					regulator-max-microvolt = <5000000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps10_out1_reg: smps10_out1 {
+					/* VBUS_5V_OTG */
+					regulator-name = "smps10_out1";
+					regulator-min-microvolt = <5000000>;
+					regulator-max-microvolt = <5000000>;
+				};
+
+				ldo1_reg: ldo1 {
+					/* VDDAPHY_CAM: vdda_csiport */
+					regulator-name = "ldo1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo2_reg: ldo2 {
+					/* VCC_2V8_DISP: Does not go anywhere */
+					regulator-name = "ldo2";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					/* Unused */
+					status = "disabled";
+				};
+
+				ldo3_reg: ldo3 {
+					/* VDDAPHY_MDM: vdda_lli */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-boot-on;
+					/* Only if Modem is used */
+					status = "disabled";
+				};
+
+				ldo4_reg: ldo4 {
+					/* VDDAPHY_DISP: vdda_dsiport/hdmi */
+					regulator-name = "ldo4";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo5_reg: ldo5 {
+					/* VDDA_1V8_PHY: usb/sata/hdmi.. */
+					regulator-name = "ldo5";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo6_reg: ldo6 {
+					/* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */
+					regulator-name = "ldo6";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo7_reg: ldo7 {
+					/* VDD_VPP: vpp1 */
+					regulator-name = "ldo7";
+					regulator-min-microvolt = <2000000>;
+					regulator-max-microvolt = <2000000>;
+					/* Only for efuse reprograming! */
+					status = "disabled";
+				};
+
+				ldo8_reg: ldo8 {
+					/* VDD_3v0: Does not go anywhere */
+					regulator-name = "ldo8";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-boot-on;
+					/* Unused */
+					status = "disabled";
+				};
+
+				ldo9_reg: ldo9 {
+					/* VCC_DV_SDIO: vdds_sdcard */
+					regulator-name = "ldo9";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-boot-on;
+				};
+
+				ldoln_reg: ldoln {
+					/* VDDA_1v8_REF: vdds_osc/mm_l4per.. */
+					regulator-name = "ldoln";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldousb_reg: ldousb {
+					/* VDDA_3V_USB: VDDA_USBHS33 */
+					regulator-name = "ldousb";
+					regulator-min-microvolt = <3250000>;
+					regulator-max-microvolt = <3250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				regen3_reg: regen3 {
+					/* REGEN3 controls LDO9 supply to card */
+					regulator-name = "regen3";
+					regulator-always-on;
+					regulator-boot-on;
+				};
+			};
+		};
+
+		palmas_power_button: palmas_power_button {
+			compatible = "ti,palmas-pwrbutton";
+			interrupt-parent = <&palmas>;
+			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+		};
+	};
+
+	twl6040: twl@4b {
+		compatible = "ti,twl6040";
+		#clock-cells = <0>;
+		reg = <0x4b>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&twl6040_pins>;
+
+		/* sys_nirq/ext_sys_irq pins get inverted at mpuss wakeupgen */
+		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_LOW>;
+
+		/* audpwron gpio defined in the board specific dts */
+
+		vio-supply = <&smps7_reg>;
+		v2v1-supply = <&smps9_reg>;
+		enable-active-high;
+
+		clocks = <&clk32kgaudio>, <&fref_xtal_ck>;
+		clock-names = "clk32k", "mclk";
+	};
+};
+
+&mcpdm_module {
+	/* Module on the SoC needs external clock from the PMIC */
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcpdm_pins>;
+	status = "okay";
+};
+
+&mcpdm {
+	clocks = <&twl6040>;
+	clock-names = "pdmclk";
+};
+
+&mcbsp1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp1_pins>;
+	status = "okay";
+};
+
+&mcbsp2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp2_pins>;
+	status = "okay";
+};
+
+&usbhshost {
+	port2-mode = "ehci-hsic";
+	port3-mode = "ehci-hsic";
+};
+
+&usbhsehci {
+	phys = <0 &hsusb2_phy &hsusb3_phy>;
+};
+
+&usb3 {
+	extcon = <&extcon_usb3>;
+	vbus-supply = <&smps10_out1_reg>;
+};
+
+&dwc3 {
+	extcon = <&extcon_usb3>;
+	dr_mode = "otg";
+};
+
+&mcspi1 {
+
+};
+
+&mcspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi2_pins>;
+};
+
+&mcspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi3_pins>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+			      <&omap5_pmx_core 0x19c>;
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart5_pins>;
+};
+
+&cpu0 {
+	cpu0-supply = <&smps123_reg>;
+};
+
+&dss {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+
+	/* vdda-supply populated in board specific dts file */
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_hdmi_pins>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};