diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2015-02-17 20:36:52 +0300 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2015-02-17 20:36:52 +0300 |
commit | a233bb742aed62fc6164073d9835135f639b8828 (patch) | |
tree | 4cec22b707a29a52f9946da6393c9580221d0a6e /arch/arm/boot/dts/sun6i-a31.dtsi | |
parent | 878ba61aa98cbb97a513757800e77613f856a029 (diff) | |
parent | 880c0d140deb12d5be39a96375fcc42ad357f17d (diff) | |
download | linux-a233bb742aed62fc6164073d9835135f639b8828.tar.xz |
Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC DT updates from Olof Johansson:
"DT changes continue to be the bulk of our merge window contents.
We continue to have a large set of changes across the board as new
platforms and drivers are added.
Some of the new platforms are:
- Alphascale ASM9260
- Marvell Armada 388
- CSR Atlas7
- TI Davinci DM816x
- Hisilicon HiP01
- ST STiH418
There have also been some sweeping changes, including relicensing of
DTS contents from GPL to GPLv2+/X11 so that the same files can be
reused in other non-GPL projects more easily. There's also been
changes to the DT Makefile to make it a little less conflict-ridden
and churny down the road"
* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (330 commits)
ARM: dts: Add PPMU node for exynos4412-trats2
ARM: dts: Add PPMU node for exynos3250-monk and exynos3250-rinato
ARM: dts: Add PPMU dt node for exynos4 and exynos4210
ARM: dts: Add PPMU dt node for exynos3250
ARM: dts: add mipi dsi device node for exynos4415
ARM: dts: add fimd device node for exynos4415
ARM: dts: Add syscon phandle to the video-phy node for Exynos4
ARM: dts: Add sound nodes for exynos4412-trats2
ARM: dts: Fix CLK_MOUT_CAMn parent clocks assignment for exynos4412-trats2
ARM: dts: Fix CLK_UART_ISP_SCLK clock assignment in exynos4x12.dtsi
ARM: dts: Add max77693 charger node for exynos4412-trats2
ARM: dts: Switch max77686 regulators to GPIO control for exynos4412-trats2
ARM: dts: Add suspend configuration for max77686 regulators for exynos4412-trats2
ARM: dts: Add Maxim 77693 fuel gauge node for exynos4412-trats2
ARM: dts: am57xx-beagle-x15: Fix USB2 mode
ARM: dts: am57xx-beagle-x15: Add extcon nodes for USB
ARM: dts: dra72-evm: Add extcon nodes for USB
ARM: dts: dra7-evm: Add extcon nodes for USB
ARM: dts: rockchip: move the hdmi ddc-i2c-bus property to the actual boards
ARM: dts: rockchip: enable vops and hdmi output on rk3288-firefly and -evb
...
Diffstat (limited to 'arch/arm/boot/dts/sun6i-a31.dtsi')
-rw-r--r-- | arch/arm/boot/dts/sun6i-a31.dtsi | 182 |
1 files changed, 118 insertions, 64 deletions
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 1e7e7bcf8307..47e557656993 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -47,7 +47,11 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +#include <dt-bindings/pinctrl/sun4i-a10.h> / { interrupt-parent = <&gic>; @@ -67,6 +71,24 @@ clocks = <&pll6 0>; status = "disabled"; }; + + framebuffer@1 { + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; + allwinner,pipeline = "de_be0-lcd0"; + clocks = <&pll6 0>; + status = "disabled"; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <24000000>; + arm,cpu-registers-not-fw-configured; }; cpus { @@ -105,10 +127,10 @@ pmu { compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu"; - interrupts = <0 120 4>, - <0 121 4>, - <0 122 4>, - <0 123 4>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; }; clocks { @@ -355,7 +377,7 @@ dma: dma-controller@01c02000 { compatible = "allwinner,sun6i-a31-dma"; reg = <0x01c02000 0x1000>; - interrupts = <0 50 4>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb1_gates 6>; resets = <&ahb1_rst 6>; #dma-cells = <1>; @@ -372,7 +394,7 @@ clock-names = "ahb", "mmc"; resets = <&ahb1_rst 8>; reset-names = "ahb"; - interrupts = <0 60 4>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -383,7 +405,7 @@ clock-names = "ahb", "mmc"; resets = <&ahb1_rst 9>; reset-names = "ahb"; - interrupts = <0 61 4>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -394,7 +416,7 @@ clock-names = "ahb", "mmc"; resets = <&ahb1_rst 10>; reset-names = "ahb"; - interrupts = <0 62 4>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -405,7 +427,7 @@ clock-names = "ahb", "mmc"; resets = <&ahb1_rst 11>; reset-names = "ahb"; - interrupts = <0 63 4>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -436,7 +458,7 @@ ehci0: usb@01c1a000 { compatible = "allwinner,sun6i-a31-ehci", "generic-ehci"; reg = <0x01c1a000 0x100>; - interrupts = <0 72 4>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb1_gates 26>; resets = <&ahb1_rst 26>; phys = <&usbphy 1>; @@ -447,7 +469,7 @@ ohci0: usb@01c1a400 { compatible = "allwinner,sun6i-a31-ohci", "generic-ohci"; reg = <0x01c1a400 0x100>; - interrupts = <0 73 4>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb1_gates 29>, <&usb_clk 16>; resets = <&ahb1_rst 29>; phys = <&usbphy 1>; @@ -458,7 +480,7 @@ ehci1: usb@01c1b000 { compatible = "allwinner,sun6i-a31-ehci", "generic-ehci"; reg = <0x01c1b000 0x100>; - interrupts = <0 74 4>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb1_gates 27>; resets = <&ahb1_rst 27>; phys = <&usbphy 2>; @@ -469,7 +491,7 @@ ohci1: usb@01c1b400 { compatible = "allwinner,sun6i-a31-ohci", "generic-ohci"; reg = <0x01c1b400 0x100>; - interrupts = <0 75 4>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb1_gates 30>, <&usb_clk 17>; resets = <&ahb1_rst 30>; phys = <&usbphy 2>; @@ -480,7 +502,7 @@ ohci2: usb@01c1c400 { compatible = "allwinner,sun6i-a31-ohci", "generic-ohci"; reg = <0x01c1c400 0x100>; - interrupts = <0 77 4>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb1_gates 31>, <&usb_clk 18>; resets = <&ahb1_rst 31>; status = "disabled"; @@ -489,10 +511,10 @@ pio: pinctrl@01c20800 { compatible = "allwinner,sun6i-a31-pinctrl"; reg = <0x01c20800 0x400>; - interrupts = <0 11 4>, - <0 15 4>, - <0 16 4>, - <0 17 4>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb1_gates 5>; gpio-controller; interrupt-controller; @@ -503,36 +525,36 @@ uart0_pins_a: uart0@0 { allwinner,pins = "PH20", "PH21"; allwinner,function = "uart0"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; i2c0_pins_a: i2c0@0 { allwinner,pins = "PH14", "PH15"; allwinner,function = "i2c0"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; i2c1_pins_a: i2c1@0 { allwinner,pins = "PH16", "PH17"; allwinner,function = "i2c1"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; i2c2_pins_a: i2c2@0 { allwinner,pins = "PH18", "PH19"; allwinner,function = "i2c2"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; mmc0_pins_a: mmc0@0 { allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; allwinner,function = "mmc0"; - allwinner,drive = <2>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; gmac_pins_mii_a: gmac_mii@0 { @@ -542,8 +564,8 @@ "PA20", "PA21", "PA22", "PA23", "PA24", "PA26", "PA27"; allwinner,function = "gmac"; - allwinner,drive = <0>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; gmac_pins_gmii_a: gmac_gmii@0 { @@ -559,8 +581,8 @@ * data lines in GMII mode run at 125MHz and * might need a higher signal drive strength */ - allwinner,drive = <2>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; gmac_pins_rgmii_a: gmac_rgmii@0 { @@ -573,8 +595,8 @@ * data lines in RGMII mode use DDR mode * and need a higher signal drive strength */ - allwinner,drive = <3>; - allwinner,pull = <0>; + allwinner,drive = <SUN4I_PINCTRL_40_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -599,11 +621,11 @@ timer@01c20c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x01c20c00 0xa0>; - interrupts = <0 18 4>, - <0 19 4>, - <0 20 4>, - <0 21 4>, - <0 22 4>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; clocks = <&osc24M>; }; @@ -612,10 +634,17 @@ reg = <0x01c20ca0 0x20>; }; + rtp: rtp@01c25000 { + compatible = "allwinner,sun6i-a31-ts"; + reg = <0x01c25000 0x100>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + #thermal-sensor-cells = <0>; + }; + uart0: serial@01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; - interrupts = <0 0 4>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 16>; @@ -628,7 +657,7 @@ uart1: serial@01c28400 { compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; - interrupts = <0 1 4>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 17>; @@ -641,7 +670,7 @@ uart2: serial@01c28800 { compatible = "snps,dw-apb-uart"; reg = <0x01c28800 0x400>; - interrupts = <0 2 4>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 18>; @@ -654,7 +683,7 @@ uart3: serial@01c28c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c28c00 0x400>; - interrupts = <0 3 4>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 19>; @@ -667,7 +696,7 @@ uart4: serial@01c29000 { compatible = "snps,dw-apb-uart"; reg = <0x01c29000 0x400>; - interrupts = <0 4 4>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 20>; @@ -680,7 +709,7 @@ uart5: serial@01c29400 { compatible = "snps,dw-apb-uart"; reg = <0x01c29400 0x400>; - interrupts = <0 5 4>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 21>; @@ -693,7 +722,7 @@ i2c0: i2c@01c2ac00 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2ac00 0x400>; - interrupts = <0 6 4>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb2_gates 0>; resets = <&apb2_rst 0>; status = "disabled"; @@ -704,7 +733,7 @@ i2c1: i2c@01c2b000 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2b000 0x400>; - interrupts = <0 7 4>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb2_gates 1>; resets = <&apb2_rst 1>; status = "disabled"; @@ -715,7 +744,7 @@ i2c2: i2c@01c2b400 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2b400 0x400>; - interrupts = <0 8 4>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb2_gates 2>; resets = <&apb2_rst 2>; status = "disabled"; @@ -726,7 +755,7 @@ i2c3: i2c@01c2b800 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2b800 0x400>; - interrupts = <0 9 4>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb2_gates 3>; resets = <&apb2_rst 3>; status = "disabled"; @@ -737,7 +766,7 @@ gmac: ethernet@01c30000 { compatible = "allwinner,sun7i-a20-gmac"; reg = <0x01c30000 0x1054>; - interrupts = <0 82 4>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; clocks = <&ahb1_gates 17>, <&gmac_tx_clk>; clock-names = "stmmaceth", "allwinner_gmac_tx"; @@ -754,10 +783,10 @@ timer@01c60000 { compatible = "allwinner,sun6i-a31-hstimer", "allwinner,sun7i-a20-hstimer"; reg = <0x01c60000 0x1000>; - interrupts = <0 51 4>, - <0 52 4>, - <0 53 4>, - <0 54 4>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb1_gates 19>; resets = <&ahb1_rst 19>; }; @@ -765,7 +794,7 @@ spi0: spi@01c68000 { compatible = "allwinner,sun6i-a31-spi"; reg = <0x01c68000 0x1000>; - interrupts = <0 65 4>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb1_gates 20>, <&spi0_clk>; clock-names = "ahb", "mod"; dmas = <&dma 23>, <&dma 23>; @@ -777,7 +806,7 @@ spi1: spi@01c69000 { compatible = "allwinner,sun6i-a31-spi"; reg = <0x01c69000 0x1000>; - interrupts = <0 66 4>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb1_gates 21>, <&spi1_clk>; clock-names = "ahb", "mod"; dmas = <&dma 24>, <&dma 24>; @@ -789,7 +818,7 @@ spi2: spi@01c6a000 { compatible = "allwinner,sun6i-a31-spi"; reg = <0x01c6a000 0x1000>; - interrupts = <0 67 4>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb1_gates 22>, <&spi2_clk>; clock-names = "ahb", "mod"; dmas = <&dma 25>, <&dma 25>; @@ -801,7 +830,7 @@ spi3: spi@01c6b000 { compatible = "allwinner,sun6i-a31-spi"; reg = <0x01c6b000 0x1000>; - interrupts = <0 68 4>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb1_gates 23>, <&spi3_clk>; clock-names = "ahb", "mod"; dmas = <&dma 26>, <&dma 26>; @@ -818,13 +847,14 @@ <0x01c86000 0x2000>; interrupt-controller; #interrupt-cells = <3>; - interrupts = <1 9 0xf04>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; rtc: rtc@01f00000 { compatible = "allwinner,sun6i-a31-rtc"; reg = <0x01f00000 0x54>; - interrupts = <0 40 4>, <0 41 4>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; }; nmi_intc: interrupt-controller@01f00c0c { @@ -832,7 +862,7 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x01f00c0c 0x38>; - interrupts = <0 32 4>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; }; prcm@01f01400 { @@ -872,6 +902,13 @@ "apb0_i2c"; }; + ir_clk: ir_clk { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + clocks = <&osc32k>, <&osc24M>; + clock-output-names = "ir"; + }; + apb0_rst: apb0_rst { compatible = "allwinner,sun6i-a31-clock-reset"; #reset-cells = <1>; @@ -883,11 +920,21 @@ reg = <0x01f01c00 0x300>; }; + ir: ir@01f02000 { + compatible = "allwinner,sun5i-a13-ir"; + clocks = <&apb0_gates 1>, <&ir_clk>; + clock-names = "apb", "ir"; + resets = <&apb0_rst 1>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x01f02000 0x40>; + status = "disabled"; + }; + r_pio: pinctrl@01f02c00 { compatible = "allwinner,sun6i-a31-r-pinctrl"; reg = <0x01f02c00 0x400>; - interrupts = <0 45 4>, - <0 46 4>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb0_gates 0>; resets = <&apb0_rst 0>; gpio-controller; @@ -895,6 +942,13 @@ #interrupt-cells = <2>; #size-cells = <0>; #gpio-cells = <3>; + + ir_pins_a: ir@0 { + allwinner,pins = "PL4"; + allwinner,function = "s_ir"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; }; }; }; |