diff options
| author | Hans de Goede <hdegoede@redhat.com> | 2014-11-13 12:31:48 +0300 |
|---|---|---|
| committer | Maxime Ripard <maxime.ripard@free-electrons.com> | 2014-11-13 19:47:06 +0300 |
| commit | 5070ac3ee2e987a9704d8d908731f11ed07399f4 (patch) | |
| tree | 333643e7b65bbe71b1269770a164fcc2adb633bc /arch/arm/boot/dts/sun6i-a31-m9.dts | |
| parent | 0d716ea960e55bacbcd1ae93e4c6186dfe4b65a8 (diff) | |
| download | linux-5070ac3ee2e987a9704d8d908731f11ed07399f4.tar.xz | |
ARM: dts: sun6i: Add EHCI support for the M9 board
The Mele M9 / A1000G quad uses both usb-ports, one goes to an internal
usb wifi card, the other to a build-in usb-hub, so neither need their
OHCI companion controller to be enabled since the are always connected at
USB-2 speeds.
The controller which is attached to the wifi also does not need a vbus
regulator.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Diffstat (limited to 'arch/arm/boot/dts/sun6i-a31-m9.dts')
| -rw-r--r-- | arch/arm/boot/dts/sun6i-a31-m9.dts | 27 |
1 files changed, 27 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts index c887be6cea3d..e81eed328c82 100644 --- a/arch/arm/boot/dts/sun6i-a31-m9.dts +++ b/arch/arm/boot/dts/sun6i-a31-m9.dts @@ -68,6 +68,19 @@ status = "okay"; }; + usbphy: phy@01c19400 { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; + }; + + ehci0: usb@01c1a000 { + status = "okay"; + }; + + ehci1: usb@01c1b000 { + status = "okay"; + }; + pio: pinctrl@01c20800 { mmc0_cd_pin_m9: mmc0_cd_pin@0 { allwinner,pins = "PH22"; @@ -75,6 +88,13 @@ allwinner,drive = <0>; allwinner,pull = <1>; }; + + usb1_vbus_pin_m9: usb1_vbus_pin@0 { + allwinner,pins = "PC27"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; }; uart0: serial@01c28000 { @@ -83,4 +103,11 @@ status = "okay"; }; }; + + reg_usb1_vbus: usb1-vbus { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_vbus_pin_m9>; + gpio = <&pio 2 27 0>; + status = "okay"; + }; }; |