ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 741 deletions

diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
deleted file mode 100644
index 511113f2e399..000000000000
--- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
+++ /dev/null
@@ -1,741 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
- * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/mfd/st,stpmic1.h>
-
-/ {
-	aliases {
-		serial0 = &uart4;
-		serial1 = &usart3;
-		serial2 = &uart7;
-	};
-
-	memory@c0000000 {
-		device_type = "memory";
-		reg = <0xc0000000 0x20000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		mcuram2: mcuram2@10000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x10000000 0x40000>;
-			no-map;
-		};
-
-		vdev0vring0: vdev0vring0@10040000 {
-			compatible = "shared-dma-pool";
-			reg = <0x10040000 0x1000>;
-			no-map;
-		};
-
-		vdev0vring1: vdev0vring1@10041000 {
-			compatible = "shared-dma-pool";
-			reg = <0x10041000 0x1000>;
-			no-map;
-		};
-
-		vdev0buffer: vdev0buffer@10042000 {
-			compatible = "shared-dma-pool";
-			reg = <0x10042000 0x4000>;
-			no-map;
-		};
-
-		mcuram: mcuram@30000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x30000000 0x40000>;
-			no-map;
-		};
-
-		retram: retram@38000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x38000000 0x10000>;
-			no-map;
-		};
-	};
-
-	led {
-		compatible = "gpio-leds";
-		led-blue {
-			label = "heartbeat";
-			gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-	};
-
-	sound {
-		compatible = "audio-graph-card";
-		label = "STM32MP15-DK";
-		routing =
-			"Playback" , "MCLK",
-			"Capture" , "MCLK",
-			"MICL" , "Mic Bias";
-		dais = <&sai2a_port &sai2b_port &i2s2_port>;
-		status = "okay";
-	};
-
-	vin: vin {
-		compatible = "regulator-fixed";
-		regulator-name = "vin";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-};
-
-&adc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&adc12_usb_cc_pins_a>;
-	vdd-supply = <&vdd>;
-	vdda-supply = <&vdd>;
-	vref-supply = <&vrefbuf>;
-	status = "okay";
-	adc1: adc@0 {
-		status = "okay";
-		/*
-		 * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19.
-		 * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C:
-		 * 5 * (56 + 47kOhms) * 5pF => 2.5us.
-		 * Use arbitrary margin here (e.g. 5us).
-		 */
-		channel@18 {
-			reg = <18>;
-			st,min-sample-time-ns = <5000>;
-		};
-		channel@19 {
-			reg = <19>;
-			st,min-sample-time-ns = <5000>;
-		};
-	};
-	adc2: adc@100 {
-		status = "okay";
-		/* USB Type-C CC1 & CC2 */
-		channel@18 {
-			reg = <18>;
-			st,min-sample-time-ns = <5000>;
-		};
-		channel@19 {
-			reg = <19>;
-			st,min-sample-time-ns = <5000>;
-		};
-	};
-};
-
-&cec {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cec_pins_b>;
-	pinctrl-1 = <&cec_sleep_pins_b>;
-	status = "okay";
-};
-
-&crc1 {
-	status = "okay";
-};
-
-&dts {
-	status = "okay";
-};
-
-&ethernet0 {
-	status = "okay";
-	pinctrl-0 = <&ethernet0_rgmii_pins_a>;
-	pinctrl-1 = <&ethernet0_rgmii_sleep_pins_a>;
-	pinctrl-names = "default", "sleep";
-	phy-mode = "rgmii-id";
-	max-speed = <1000>;
-	phy-handle = <&phy0>;
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "snps,dwmac-mdio";
-		phy0: ethernet-phy@0 {
-			reg = <0>;
-		};
-	};
-};
-
-&hash1 {
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&i2c1_pins_a>;
-	pinctrl-1 = <&i2c1_sleep_pins_a>;
-	i2c-scl-rising-time-ns = <100>;
-	i2c-scl-falling-time-ns = <7>;
-	status = "okay";
-	/delete-property/dmas;
-	/delete-property/dma-names;
-
-	hdmi-transmitter@39 {
-		compatible = "sil,sii9022";
-		reg = <0x39>;
-		iovcc-supply = <&v3v3_hdmi>;
-		cvcc12-supply = <&v1v2_hdmi>;
-		reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>;
-		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
-		interrupt-parent = <&gpiog>;
-		#sound-dai-cells = <0>;
-		status = "okay";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				sii9022_in: endpoint {
-					remote-endpoint = <&ltdc_ep0_out>;
-				};
-			};
-
-			port@3 {
-				reg = <3>;
-				sii9022_tx_endpoint: endpoint {
-					remote-endpoint = <&i2s2_endpoint>;
-				};
-			};
-		};
-	};
-
-	cs42l51: cs42l51@4a {
-		compatible = "cirrus,cs42l51";
-		reg = <0x4a>;
-		#sound-dai-cells = <0>;
-		VL-supply = <&v3v3>;
-		VD-supply = <&v1v8_audio>;
-		VA-supply = <&v1v8_audio>;
-		VAHP-supply = <&v1v8_audio>;
-		reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>;
-		clocks = <&sai2a>;
-		clock-names = "MCLK";
-		status = "okay";
-
-		cs42l51_port: port {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cs42l51_tx_endpoint: endpoint@0 {
-				reg = <0>;
-				remote-endpoint = <&sai2a_endpoint>;
-				frame-master = <&cs42l51_tx_endpoint>;
-				bitclock-master = <&cs42l51_tx_endpoint>;
-			};
-
-			cs42l51_rx_endpoint: endpoint@1 {
-				reg = <1>;
-				remote-endpoint = <&sai2b_endpoint>;
-				frame-master = <&cs42l51_rx_endpoint>;
-				bitclock-master = <&cs42l51_rx_endpoint>;
-			};
-		};
-	};
-};
-
-&i2c4 {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&i2c4_pins_a>;
-	pinctrl-1 = <&i2c4_sleep_pins_a>;
-	i2c-scl-rising-time-ns = <185>;
-	i2c-scl-falling-time-ns = <20>;
-	clock-frequency = <400000>;
-	status = "okay";
-	/* spare dmas for other usage */
-	/delete-property/dmas;
-	/delete-property/dma-names;
-
-	stusb1600@28 {
-		compatible = "st,stusb1600";
-		reg = <0x28>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-parent = <&gpioi>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&stusb1600_pins_a>;
-		status = "okay";
-		vdd-supply = <&vin>;
-
-		connector {
-			compatible = "usb-c-connector";
-			label = "USB-C";
-			power-role = "dual";
-			typec-power-opmode = "default";
-
-			port {
-				con_usbotg_hs_ep: endpoint {
-					remote-endpoint = <&usbotg_hs_ep>;
-				};
-			};
-		};
-	};
-
-	pmic: stpmic@33 {
-		compatible = "st,stpmic1";
-		reg = <0x33>;
-		interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		status = "okay";
-
-		regulators {
-			compatible = "st,stpmic1-regulators";
-			buck1-supply = <&vin>;
-			buck2-supply = <&vin>;
-			buck3-supply = <&vin>;
-			buck4-supply = <&vin>;
-			ldo1-supply = <&v3v3>;
-			ldo2-supply = <&vin>;
-			ldo3-supply = <&vdd_ddr>;
-			ldo4-supply = <&vin>;
-			ldo5-supply = <&vin>;
-			ldo6-supply = <&v3v3>;
-			vref_ddr-supply = <&vin>;
-			boost-supply = <&vin>;
-			pwr_sw1-supply = <&bst_out>;
-			pwr_sw2-supply = <&bst_out>;
-
-			vddcore: buck1 {
-				regulator-name = "vddcore";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-initial-mode = <0>;
-				regulator-over-current-protection;
-			};
-
-			vdd_ddr: buck2 {
-				regulator-name = "vdd_ddr";
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-initial-mode = <0>;
-				regulator-over-current-protection;
-			};
-
-			vdd: buck3 {
-				regulator-name = "vdd";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				st,mask-reset;
-				regulator-initial-mode = <0>;
-				regulator-over-current-protection;
-			};
-
-			v3v3: buck4 {
-				regulator-name = "v3v3";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-over-current-protection;
-				regulator-initial-mode = <0>;
-			};
-
-			v1v8_audio: ldo1 {
-				regulator-name = "v1v8_audio";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				interrupts = <IT_CURLIM_LDO1 0>;
-			};
-
-			v3v3_hdmi: ldo2 {
-				regulator-name = "v3v3_hdmi";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				interrupts = <IT_CURLIM_LDO2 0>;
-			};
-
-			vtt_ddr: ldo3 {
-				regulator-name = "vtt_ddr";
-				regulator-min-microvolt = <500000>;
-				regulator-max-microvolt = <750000>;
-				regulator-always-on;
-				regulator-over-current-protection;
-			};
-
-			vdd_usb: ldo4 {
-				regulator-name = "vdd_usb";
-				interrupts = <IT_CURLIM_LDO4 0>;
-			};
-
-			vdda: ldo5 {
-				regulator-name = "vdda";
-				regulator-min-microvolt = <2900000>;
-				regulator-max-microvolt = <2900000>;
-				interrupts = <IT_CURLIM_LDO5 0>;
-				regulator-boot-on;
-			};
-
-			v1v2_hdmi: ldo6 {
-				regulator-name = "v1v2_hdmi";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				interrupts = <IT_CURLIM_LDO6 0>;
-			};
-
-			vref_ddr: vref_ddr {
-				regulator-name = "vref_ddr";
-				regulator-always-on;
-			};
-
-			bst_out: boost {
-				regulator-name = "bst_out";
-				interrupts = <IT_OCP_BOOST 0>;
-			};
-
-			vbus_otg: pwr_sw1 {
-				regulator-name = "vbus_otg";
-				interrupts = <IT_OCP_OTG 0>;
-			};
-
-			vbus_sw: pwr_sw2 {
-				regulator-name = "vbus_sw";
-				interrupts = <IT_OCP_SWOUT 0>;
-				regulator-active-discharge = <1>;
-			};
-		};
-
-		onkey {
-			compatible = "st,stpmic1-onkey";
-			interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
-			interrupt-names = "onkey-falling", "onkey-rising";
-			power-off-time-sec = <10>;
-			status = "okay";
-		};
-
-		watchdog {
-			compatible = "st,stpmic1-wdt";
-			status = "disabled";
-		};
-	};
-};
-
-&i2c5 {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&i2c5_pins_a>;
-	pinctrl-1 = <&i2c5_sleep_pins_a>;
-	i2c-scl-rising-time-ns = <185>;
-	i2c-scl-falling-time-ns = <20>;
-	clock-frequency = <400000>;
-	/* spare dmas for other usage */
-	/delete-property/dmas;
-	/delete-property/dma-names;
-	status = "disabled";
-};
-
-&i2s2 {
-	clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
-	clock-names = "pclk", "i2sclk", "x8k", "x11k";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&i2s2_pins_a>;
-	pinctrl-1 = <&i2s2_sleep_pins_a>;
-	status = "okay";
-
-	i2s2_port: port {
-		i2s2_endpoint: endpoint {
-			remote-endpoint = <&sii9022_tx_endpoint>;
-			dai-format = "i2s";
-			mclk-fs = <256>;
-		};
-	};
-};
-
-&ipcc {
-	status = "okay";
-};
-
-&iwdg2 {
-	timeout-sec = <32>;
-	status = "okay";
-};
-
-&ltdc {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&ltdc_pins_a>;
-	pinctrl-1 = <&ltdc_sleep_pins_a>;
-	status = "okay";
-
-	port {
-		ltdc_ep0_out: endpoint {
-			remote-endpoint = <&sii9022_in>;
-		};
-	};
-};
-
-&m4_rproc {
-	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
-			<&vdev0vring1>, <&vdev0buffer>;
-	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>;
-	mbox-names = "vq0", "vq1", "shutdown", "detach";
-	interrupt-parent = <&exti>;
-	interrupts = <68 1>;
-	status = "okay";
-};
-
-&pwr_regulators {
-	vdd-supply = <&vdd>;
-	vdd_3v3_usbfs-supply = <&vdd_usb>;
-};
-
-&rng1 {
-	status = "okay";
-};
-
-&rtc {
-	status = "okay";
-};
-
-&sai2 {
-	clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
-	clock-names = "pclk", "x8k", "x11k";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>;
-	pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>;
-	status = "okay";
-
-	sai2a: audio-controller@4400b004 {
-		#clock-cells = <0>;
-		dma-names = "tx";
-		status = "okay";
-
-		sai2a_port: port {
-			sai2a_endpoint: endpoint {
-				remote-endpoint = <&cs42l51_tx_endpoint>;
-				dai-format = "i2s";
-				mclk-fs = <256>;
-				dai-tdm-slot-num = <2>;
-				dai-tdm-slot-width = <32>;
-			};
-		};
-	};
-
-	sai2b: audio-controller@4400b024 {
-		dma-names = "rx";
-		st,sync = <&sai2a 2>;
-		clocks = <&rcc SAI2_K>, <&sai2a>;
-		clock-names = "sai_ck", "MCLK";
-		status = "okay";
-
-		sai2b_port: port {
-			sai2b_endpoint: endpoint {
-				remote-endpoint = <&cs42l51_rx_endpoint>;
-				dai-format = "i2s";
-				mclk-fs = <256>;
-				dai-tdm-slot-num = <2>;
-				dai-tdm-slot-width = <32>;
-			};
-		};
-	};
-};
-
-&sdmmc1 {
-	pinctrl-names = "default", "opendrain", "sleep";
-	pinctrl-0 = <&sdmmc1_b4_pins_a>;
-	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
-	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
-	cd-gpios = <&gpiob 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
-	disable-wp;
-	st,neg-edge;
-	bus-width = <4>;
-	vmmc-supply = <&v3v3>;
-	status = "okay";
-};
-
-&sdmmc3 {
-	pinctrl-names = "default", "opendrain", "sleep";
-	pinctrl-0 = <&sdmmc3_b4_pins_a>;
-	pinctrl-1 = <&sdmmc3_b4_od_pins_a>;
-	pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>;
-	broken-cd;
-	st,neg-edge;
-	bus-width = <4>;
-	vmmc-supply = <&v3v3>;
-	status = "disabled";
-};
-
-&timers1 {
-	/* spare dmas for other usage */
-	/delete-property/dmas;
-	/delete-property/dma-names;
-	status = "disabled";
-	pwm {
-		pinctrl-0 = <&pwm1_pins_a>;
-		pinctrl-1 = <&pwm1_sleep_pins_a>;
-		pinctrl-names = "default", "sleep";
-		status = "okay";
-	};
-	timer@0 {
-		status = "okay";
-	};
-};
-
-&timers3 {
-	/delete-property/dmas;
-	/delete-property/dma-names;
-	status = "disabled";
-	pwm {
-		pinctrl-0 = <&pwm3_pins_a>;
-		pinctrl-1 = <&pwm3_sleep_pins_a>;
-		pinctrl-names = "default", "sleep";
-		status = "okay";
-	};
-	timer@2 {
-		status = "okay";
-	};
-};
-
-&timers4 {
-	/delete-property/dmas;
-	/delete-property/dma-names;
-	status = "disabled";
-	pwm {
-		pinctrl-0 = <&pwm4_pins_a &pwm4_pins_b>;
-		pinctrl-1 = <&pwm4_sleep_pins_a &pwm4_sleep_pins_b>;
-		pinctrl-names = "default", "sleep";
-		status = "okay";
-	};
-	timer@3 {
-		status = "okay";
-	};
-};
-
-&timers5 {
-	/delete-property/dmas;
-	/delete-property/dma-names;
-	status = "disabled";
-	pwm {
-		pinctrl-0 = <&pwm5_pins_a>;
-		pinctrl-1 = <&pwm5_sleep_pins_a>;
-		pinctrl-names = "default", "sleep";
-		status = "okay";
-	};
-	timer@4 {
-		status = "okay";
-	};
-};
-
-&timers6 {
-	/delete-property/dmas;
-	/delete-property/dma-names;
-	status = "disabled";
-	timer@5 {
-		status = "okay";
-	};
-};
-
-&timers12 {
-	/delete-property/dmas;
-	/delete-property/dma-names;
-	status = "disabled";
-	pwm {
-		pinctrl-0 = <&pwm12_pins_a>;
-		pinctrl-1 = <&pwm12_sleep_pins_a>;
-		pinctrl-names = "default", "sleep";
-		status = "okay";
-	};
-	timer@11 {
-		status = "okay";
-	};
-};
-
-&uart4 {
-	pinctrl-names = "default", "sleep", "idle";
-	pinctrl-0 = <&uart4_pins_a>;
-	pinctrl-1 = <&uart4_sleep_pins_a>;
-	pinctrl-2 = <&uart4_idle_pins_a>;
-	/delete-property/dmas;
-	/delete-property/dma-names;
-	status = "okay";
-};
-
-&uart7 {
-	pinctrl-names = "default", "sleep", "idle";
-	pinctrl-0 = <&uart7_pins_c>;
-	pinctrl-1 = <&uart7_sleep_pins_c>;
-	pinctrl-2 = <&uart7_idle_pins_c>;
-	/delete-property/dmas;
-	/delete-property/dma-names;
-	status = "disabled";
-};
-
-&usart3 {
-	pinctrl-names = "default", "sleep", "idle";
-	pinctrl-0 = <&usart3_pins_c>;
-	pinctrl-1 = <&usart3_sleep_pins_c>;
-	pinctrl-2 = <&usart3_idle_pins_c>;
-	uart-has-rtscts;
-	status = "disabled";
-};
-
-&usbh_ehci {
-	phys = <&usbphyc_port0>;
-	status = "okay";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	/* onboard HUB */
-	hub@1 {
-		compatible = "usb424,2514";
-		reg = <1>;
-		vdd-supply = <&v3v3>;
-	};
-};
-
-&usbotg_hs {
-	phys = <&usbphyc_port1 0>;
-	phy-names = "usb2-phy";
-	usb-role-switch;
-	status = "okay";
-
-	port {
-		usbotg_hs_ep: endpoint {
-			remote-endpoint = <&con_usbotg_hs_ep>;
-		};
-	};
-};
-
-&usbphyc {
-	status = "okay";
-};
-
-&usbphyc_port0 {
-	phy-supply = <&vdd_usb>;
-	st,tune-hs-dc-level = <2>;
-	st,enable-fs-rftime-tuning;
-	st,enable-hs-rftime-reduction;
-	st,trim-hs-current = <15>;
-	st,trim-hs-impedance = <1>;
-	st,tune-squelch-level = <3>;
-	st,tune-hs-rx-offset = <2>;
-	st,no-lsfs-sc;
-};
-
-&usbphyc_port1 {
-	phy-supply = <&vdd_usb>;
-	st,tune-hs-dc-level = <2>;
-	st,enable-fs-rftime-tuning;
-	st,enable-hs-rftime-reduction;
-	st,trim-hs-current = <15>;
-	st,trim-hs-impedance = <1>;
-	st,tune-squelch-level = <3>;
-	st,tune-hs-rx-offset = <2>;
-	st,no-lsfs-sc;
-};
-
-&vrefbuf {
-	regulator-min-microvolt = <2500000>;
-	regulator-max-microvolt = <2500000>;
-	vdda-supply = <&vdd>;
-	status = "okay";
-};