ARM: dts: stm32: use dedicated files for pinctrl on stm32f7 family

Currently, same stm32f746-pinctrl driver is used for stm32f746 and
stm32f769 MCU. As pin map is different between those 2 MCUs,
a stm32f769-pinctrl driver has been recently added.
This patch
 -allows to use stm32f769-pinctrl driver for stm32f769 boards
 -reworks stm32 devicetree files to fit with stm32f746 / stm32f769

Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

1 files changed, 0 insertions, 217 deletions

diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index 5f66d151eedb..8fe96d6d0ca2 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -42,7 +42,6 @@
 
 #include "skeleton.dtsi"
 #include "armv7-m.dtsi"
-#include <dt-bindings/pinctrl/stm32-pinfunc.h>
 #include <dt-bindings/clock/stm32fx-clock.h>
 #include <dt-bindings/mfd/stm32f7-rcc.h>
 
@@ -498,222 +497,6 @@
 			reg = <0x40007000 0x400>;
 		};
 
-		pin-controller {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "st,stm32f746-pinctrl";
-			ranges = <0 0x40020000 0x3000>;
-			interrupt-parent = <&exti>;
-			st,syscfg = <&syscfg 0x8>;
-			pins-are-numbered;
-
-			gpioa: gpio@40020000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x0 0x400>;
-				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOA)>;
-				st,bank-name = "GPIOA";
-			};
-
-			gpiob: gpio@40020400 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x400 0x400>;
-				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOB)>;
-				st,bank-name = "GPIOB";
-			};
-
-			gpioc: gpio@40020800 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x800 0x400>;
-				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOC)>;
-				st,bank-name = "GPIOC";
-			};
-
-			gpiod: gpio@40020c00 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0xc00 0x400>;
-				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOD)>;
-				st,bank-name = "GPIOD";
-			};
-
-			gpioe: gpio@40021000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x1000 0x400>;
-				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOE)>;
-				st,bank-name = "GPIOE";
-			};
-
-			gpiof: gpio@40021400 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x1400 0x400>;
-				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOF)>;
-				st,bank-name = "GPIOF";
-			};
-
-			gpiog: gpio@40021800 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x1800 0x400>;
-				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOG)>;
-				st,bank-name = "GPIOG";
-			};
-
-			gpioh: gpio@40021c00 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x1c00 0x400>;
-				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOH)>;
-				st,bank-name = "GPIOH";
-			};
-
-			gpioi: gpio@40022000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x2000 0x400>;
-				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOI)>;
-				st,bank-name = "GPIOI";
-			};
-
-			gpioj: gpio@40022400 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x2400 0x400>;
-				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOJ)>;
-				st,bank-name = "GPIOJ";
-			};
-
-			gpiok: gpio@40022800 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x2800 0x400>;
-				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOK)>;
-				st,bank-name = "GPIOK";
-			};
-
-			cec_pins_a: cec@0 {
-				pins {
-					pinmux = <STM32_PINMUX('A', 15, AF4)>; /* HDMI CEC */
-					slew-rate = <0>;
-					drive-open-drain;
-					bias-disable;
-				};
-			};
-
-			usart1_pins_a: usart1@0 {
-				pins1 {
-					pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <0>;
-				};
-				pins2 {
-					pinmux = <STM32_PINMUX('A', 10, AF7)>; /* USART1_RX */
-					bias-disable;
-				};
-			};
-
-			usart1_pins_b: usart1@1 {
-				pins1 {
-					pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <0>;
-				};
-				pins2 {
-					pinmux = <STM32_PINMUX('B', 7, AF7)>; /* USART1_RX */
-					bias-disable;
-				};
-			};
-
-			i2c1_pins_b: i2c1@0 {
-				pins {
-					pinmux = <STM32_PINMUX('B', 9, AF4)>, /* I2C1 SDA */
-						 <STM32_PINMUX('B', 8, AF4)>; /* I2C1 SCL */
-					bias-disable;
-					drive-open-drain;
-					slew-rate = <0>;
-				};
-			};
-
-			usbotg_hs_pins_a: usbotg-hs@0 {
-				pins {
-					pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT */
-						 <STM32_PINMUX('I', 11, AF10)>, /* OTG_HS_ULPI_DIR */
-						 <STM32_PINMUX('C', 0, AF10)>, /* OTG_HS_ULPI_STP */
-						 <STM32_PINMUX('A', 5, AF10)>, /* OTG_HS_ULPI_CK */
-						 <STM32_PINMUX('A', 3, AF10)>, /* OTG_HS_ULPI_D0 */
-						 <STM32_PINMUX('B', 0, AF10)>, /* OTG_HS_ULPI_D1 */
-						 <STM32_PINMUX('B', 1, AF10)>, /* OTG_HS_ULPI_D2 */
-						 <STM32_PINMUX('B', 10, AF10)>, /* OTG_HS_ULPI_D3 */
-						 <STM32_PINMUX('B', 11, AF10)>, /* OTG_HS_ULPI_D4 */
-						 <STM32_PINMUX('B', 12, AF10)>, /* OTG_HS_ULPI_D5 */
-						 <STM32_PINMUX('B', 13, AF10)>, /* OTG_HS_ULPI_D6 */
-						 <STM32_PINMUX('B', 5, AF10)>; /* OTG_HS_ULPI_D7 */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <2>;
-				};
-			};
-
-			usbotg_hs_pins_b: usbotg-hs@1 {
-				pins {
-					pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT */
-						 <STM32_PINMUX('C', 2, AF10)>, /* OTG_HS_ULPI_DIR */
-						 <STM32_PINMUX('C', 0, AF10)>, /* OTG_HS_ULPI_STP */
-						 <STM32_PINMUX('A', 5, AF10)>, /* OTG_HS_ULPI_CK */
-						 <STM32_PINMUX('A', 3, AF10)>, /* OTG_HS_ULPI_D0 */
-						 <STM32_PINMUX('B', 0, AF10)>, /* OTG_HS_ULPI_D1 */
-						 <STM32_PINMUX('B', 1, AF10)>, /* OTG_HS_ULPI_D2 */
-						 <STM32_PINMUX('B', 10, AF10)>, /* OTG_HS_ULPI_D3 */
-						 <STM32_PINMUX('B', 11, AF10)>, /* OTG_HS_ULPI_D4 */
-						 <STM32_PINMUX('B', 12, AF10)>, /* OTG_HS_ULPI_D5 */
-						 <STM32_PINMUX('B', 13, AF10)>, /* OTG_HS_ULPI_D6 */
-						 <STM32_PINMUX('B', 5, AF10)>; /* OTG_HS_ULPI_D7 */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <2>;
-				};
-			};
-
-			usbotg_fs_pins_a: usbotg-fs@0 {
-				pins {
-					pinmux = <STM32_PINMUX('A', 10, AF10)>, /* OTG_FS_ID */
-						 <STM32_PINMUX('A', 11, AF10)>, /* OTG_FS_DM */
-						 <STM32_PINMUX('A', 12, AF10)>; /* OTG_FS_DP */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <2>;
-				};
-			};
-		};
-
 		crc: crc@40023000 {
 			compatible = "st,stm32f7-crc";
 			reg = <0x40023000 0x400>;