ARM: dts: Introduce STM32F429 MCU

The STMicrolectornics's STM32F429 MCU has the following main features:
 - Cortex-M4 core running up to @180MHz
 - 2MB internal flash, 256KBytes internal RAM
 - FMC controller to connect SDRAM, NOR and NAND memories
 - SD/MMC/SDIO support
 - Ethernet controller
 - USB OTFG FS & HS controllers
 - I2C, SPI, CAN busses support
 - Several 16 & 32 bits general purpose timers
 - Serial Audio interface
 - LCD controller

Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>

1 files changed, 214 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
new file mode 100644
index 000000000000..aa73b4f4172c
--- /dev/null
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -0,0 +1,214 @@
+/*
+ * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "armv7-m.dtsi"
+
+/ {
+	clocks {
+		clk_sysclk: clk-sysclk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <180000000>;
+		};
+
+		clk_hclk: clk-hclk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <180000000>;
+		};
+
+		clk_pclk1: clk-pclk1 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <45000000>;
+		};
+
+		clk_pclk2: clk-pclk2 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <90000000>;
+		};
+
+		clk_pmtr1: clk-pmtr1 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <90000000>;
+		};
+
+		clk_pmtr2: clk-pmtr2 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <180000000>;
+		};
+
+		clk_systick: clk-systick {
+			compatible = "fixed-factor-clock";
+			clocks = <&clk_hclk>;
+			#clock-cells = <0>;
+			clock-div = <8>;
+			clock-mult = <1>;
+		};
+	};
+
+	soc {
+		timer2: timer@40000000 {
+			compatible = "st,stm32-timer";
+			reg = <0x40000000 0x400>;
+			interrupts = <28>;
+			clocks = <&clk_pmtr1>;
+			status = "disabled";
+		};
+
+		timer3: timer@40000400 {
+			compatible = "st,stm32-timer";
+			reg = <0x40000400 0x400>;
+			interrupts = <29>;
+			clocks = <&clk_pmtr1>;
+			status = "disabled";
+		};
+
+		timer4: timer@40000800 {
+			compatible = "st,stm32-timer";
+			reg = <0x40000800 0x400>;
+			interrupts = <30>;
+			clocks = <&clk_pmtr1>;
+			status = "disabled";
+		};
+
+		timer5: timer@40000c00 {
+			compatible = "st,stm32-timer";
+			reg = <0x40000c00 0x400>;
+			interrupts = <50>;
+			clocks = <&clk_pmtr1>;
+		};
+
+		timer6: timer@40001000 {
+			compatible = "st,stm32-timer";
+			reg = <0x40001000 0x400>;
+			interrupts = <54>;
+			clocks = <&clk_pmtr1>;
+			status = "disabled";
+		};
+
+		timer7: timer@40001400 {
+			compatible = "st,stm32-timer";
+			reg = <0x40001400 0x400>;
+			interrupts = <55>;
+			clocks = <&clk_pmtr1>;
+			status = "disabled";
+		};
+
+		usart2: serial@40004400 {
+			compatible = "st,stm32-usart", "st,stm32-uart";
+			reg = <0x40004400 0x400>;
+			interrupts = <38>;
+			clocks = <&clk_pclk1>;
+			status = "disabled";
+		};
+
+		usart3: serial@40004800 {
+			compatible = "st,stm32-usart", "st,stm32-uart";
+			reg = <0x40004800 0x400>;
+			interrupts = <39>;
+			clocks = <&clk_pclk1>;
+			status = "disabled";
+		};
+
+		usart4: serial@40004c00 {
+			compatible = "st,stm32-uart";
+			reg = <0x40004c00 0x400>;
+			interrupts = <52>;
+			clocks = <&clk_pclk1>;
+			status = "disabled";
+		};
+
+		usart5: serial@40005000 {
+			compatible = "st,stm32-uart";
+			reg = <0x40005000 0x400>;
+			interrupts = <53>;
+			clocks = <&clk_pclk1>;
+			status = "disabled";
+		};
+
+		usart7: serial@40007800 {
+			compatible = "st,stm32-usart", "st,stm32-uart";
+			reg = <0x40007800 0x400>;
+			interrupts = <82>;
+			clocks = <&clk_pclk1>;
+			status = "disabled";
+		};
+
+		usart8: serial@40007c00 {
+			compatible = "st,stm32-usart", "st,stm32-uart";
+			reg = <0x40007c00 0x400>;
+			interrupts = <83>;
+			clocks = <&clk_pclk1>;
+			status = "disabled";
+		};
+
+		usart1: serial@40011000 {
+			compatible = "st,stm32-usart", "st,stm32-uart";
+			reg = <0x40011000 0x400>;
+			interrupts = <37>;
+			clocks = <&clk_pclk2>;
+			status = "disabled";
+		};
+
+		usart6: serial@40011400 {
+			compatible = "st,stm32-usart", "st,stm32-uart";
+			reg = <0x40011400 0x400>;
+			interrupts = <71>;
+			clocks = <&clk_pclk2>;
+			status = "disabled";
+		};
+	};
+};
+
+&systick {
+	clocks = <&clk_systick>;
+	status = "okay";
+};