ARM: dts: ux500: Rename generic pin configs according to pin group

Some components (e.g. SDI, I2C) can be used with different pin assignments.
Before we can add the alternative configurations, we need to rename the
current configurations to more generic names.

Each pin configuration usually configures one specific pin group.
Therefore we rename the configurations to use the pin group as name.
Make up for the slightly longer names by removing the "_mode" suffix.

Rename all existing uses to use the new labels.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20191125122256.53482-2-stephan@gerhold.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 26 insertions, 26 deletions

diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index 566b35ac0d0c..8b80dcdf6e5b 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -156,19 +156,19 @@
 
 		msp0: msp@80123000 {
 			pinctrl-names = "default";
-			pinctrl-0 = <&msp0_default_mode>;
+			pinctrl-0 = <&msp0txrxtfstck_a_1_default>;
 			status = "okay";
 		};
 
 		msp1: msp@80124000 {
 			pinctrl-names = "default";
-			pinctrl-0 = <&msp1_default_mode>;
+			pinctrl-0 = <&msp1txrx_a_1_default>;
 			status = "okay";
 		};
 
 		msp2: msp@80117000 {
 			pinctrl-names = "default";
-			pinctrl-0 = <&msp2_default_mode>;
+			pinctrl-0 = <&msp2_a_1_default>;
 		};
 
 		msp3: msp@80125000 {
@@ -238,8 +238,8 @@
 			vmmc-supply = <&ab8500_ldo_aux3_reg>;
 			vqmmc-supply = <&vmmci>;
 			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdi0_default_mode>;
-			pinctrl-1 = <&sdi0_sleep_mode>;
+			pinctrl-0 = <&mc0_a_1_default &sdi0_default_mode>;
+			pinctrl-1 = <&mc0_a_1_sleep>;
 
 			/* GPIO218 MMC_CD */
 			cd-gpios  = <&gpio6 26 GPIO_ACTIVE_LOW>;
@@ -253,8 +253,8 @@
 			max-frequency = <100000000>;
 			bus-width = <4>;
 			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdi1_default_mode>;
-			pinctrl-1 = <&sdi1_sleep_mode>;
+			pinctrl-0 = <&mc1_a_1_default>;
+			pinctrl-1 = <&mc1_a_1_sleep>;
 
 			status = "okay";
 		};
@@ -263,7 +263,7 @@
 		sdi2_per3@80005000 {
 			arm,primecell-periphid = <0x10480180>;
 			pinctrl-names = "default";
-			pinctrl-0 = <&sdi2_sleep_mode>;
+			pinctrl-0 = <&mc2_a_1_sleep>;
 
 			status = "okay";
 		};
@@ -276,49 +276,49 @@
 			cap-mmc-highspeed;
 			vmmc-supply = <&ab8500_ldo_aux2_reg>;
 			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdi4_default_mode>;
-			pinctrl-1 = <&sdi4_sleep_mode>;
+			pinctrl-0 = <&mc4_a_1_default>;
+			pinctrl-1 = <&mc4_a_1_sleep>;
 
 			status = "okay";
 		};
 
 		uart@80120000 {
 			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&uart0_default_mode>;
-			pinctrl-1 = <&uart0_sleep_mode>;
+			pinctrl-0 = <&u0_a_1_default>;
+			pinctrl-1 = <&u0_a_1_sleep>;
 			status = "okay";
 		};
 
 		/* This UART is unused and thus left disabled */
 		uart@80121000 {
 			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&uart1_default_mode>;
-			pinctrl-1 = <&uart1_sleep_mode>;
+			pinctrl-0 = <&u1rxtx_a_1_default>;
+			pinctrl-1 = <&u1rxtx_a_1_sleep>;
 		};
 
 		uart@80007000 {
 			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&uart2_default_mode>;
-			pinctrl-1 = <&uart2_sleep_mode>;
+			pinctrl-0 = <&u2rxtx_c_1_default>;
+			pinctrl-1 = <&u2rxtx_c_1_sleep>;
 			status = "okay";
 		};
 
 		i2c@80004000 {
 			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c0_default_mode>;
-			pinctrl-1 = <&i2c0_sleep_mode>;
+			pinctrl-0 = <&i2c0_a_1_default>;
+			pinctrl-1 = <&i2c0_a_1_sleep>;
 		};
 
 		i2c@80122000 {
 			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c1_default_mode>;
-			pinctrl-1 = <&i2c1_sleep_mode>;
+			pinctrl-0 = <&i2c1_b_2_default>;
+			pinctrl-1 = <&i2c1_b_2_sleep>;
 		};
 
 		i2c@80128000 {
 			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c2_default_mode>;
-			pinctrl-1 = <&i2c2_sleep_mode>;
+			pinctrl-0 = <&i2c2_b_2_default>;
+			pinctrl-1 = <&i2c2_b_2_sleep>;
 			lsm303dlh@18 {
 				/* Accelerometer */
 				compatible = "st,lsm303dlh-accel";
@@ -367,8 +367,8 @@
 
 		i2c@80110000 {
 			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c3_default_mode>;
-			pinctrl-1 = <&i2c3_sleep_mode>;
+			pinctrl-0 = <&i2c3_c_2_default>;
+			pinctrl-1 = <&i2c3_c_2_sleep>;
 		};
 
 		spi@80002000 {
@@ -402,8 +402,8 @@
 
 				ab8500_usb {
 					pinctrl-names = "default", "sleep";
-					pinctrl-0 = <&musb_default_mode>;
-					pinctrl-1 = <&musb_sleep_mode>;
+					pinctrl-0 = <&usb_a_1_default>;
+					pinctrl-1 = <&usb_a_1_sleep>;
 				};
 
 				ext_regulators: ab8500-ext-regulators {