diff options
| author | Linus Walleij <linus.walleij@linaro.org> | 2014-09-30 14:16:25 +0400 |
|---|---|---|
| committer | Linus Walleij <linus.walleij@linaro.org> | 2014-10-20 11:08:26 +0400 |
| commit | 1637d480f873ca305f7f090e3b3bc92430b5892f (patch) | |
| tree | c254049d778fe41f11b35623561173873c6a1177 /arch/arm/boot/dts/ste-snowball.dts | |
| parent | 51d39936acba666774b596829277db3e13e5e970 (diff) | |
| download | linux-1637d480f873ca305f7f090e3b3bc92430b5892f.tar.xz | |
pinctrl: nomadik: force-convert to generic config bindings
This converts the Nomadik pin controller and all associated device
trees to use the standard, generic config bindings for pin controllers.
There are no such device trees deployed in the wild so this is
safe to do to set a good example.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'arch/arm/boot/dts/ste-snowball.dts')
| -rw-r--r-- | arch/arm/boot/dts/ste-snowball.dts | 24 |
1 files changed, 12 insertions, 12 deletions
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index d43f8b19e7dd..206826a855c0 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -409,12 +409,12 @@ }; /* LAN IRQ pin */ snowball_cfg1 { - ste,pins = "GPIO140_B11"; + pins = "GPIO140_B11"; ste,config = <&in_nopull>; }; /* LAN reset pin */ snowball_cfg2 { - ste,pins = "GPIO141_C12"; + pins = "GPIO141_C12"; ste,config = <&gpio_out_hi>; }; @@ -427,7 +427,7 @@ groups = "mc0dat31dir_a_1"; }; snowball_cfg1 { - ste,pins = "GPIO21_AB3"; /* DAT31DIR */ + pins = "GPIO21_AB3"; /* DAT31DIR */ ste,config = <&out_hi>; }; @@ -440,15 +440,15 @@ groups = "ssp0_a_1"; }; snowball_cfg1 { - ste,pins = "GPIO144_B13"; /* FRM */ + pins = "GPIO144_B13"; /* FRM */ ste,config = <&gpio_out_hi>; }; snowball_cfg2 { - ste,pins = "GPIO145_C13"; /* RXD */ + pins = "GPIO145_C13"; /* RXD */ ste,config = <&in_pd>; }; snowball_cfg3 { - ste,pins = + pins = "GPIO146_D13", /* TXD */ "GPIO143_D12"; /* CLK */ ste,config = <&out_lo>; @@ -459,7 +459,7 @@ gpio_led { gpioled_snowball_mode: gpioled_default { snowball_cfg1 { - ste,pins = "GPIO142_C11"; + pins = "GPIO142_C11"; ste,config = <&gpio_out_hi>; }; @@ -469,7 +469,7 @@ accel_snowball_mode: accel_snowball { /* Accelerometer lines */ snowball_cfg1 { - ste,pins = + pins = "GPIO163_C20", /* ACCEL_IRQ1 */ "GPIO164_B21"; /* ACCEL_IRQ2 */ ste,config = <&gpio_in_pu>; @@ -479,7 +479,7 @@ magnetometer { magneto_snowball_mode: magneto_snowball { snowball_cfg1 { - ste,pins = "GPIO165_C21"; /* MAG_DRDY */ + pins = "GPIO165_C21"; /* MAG_DRDY */ ste,config = <&gpio_in_pu>; }; }; @@ -491,7 +491,7 @@ * pull low to reset state */ snowball_cfg1 { - ste,pins = "GPIO171_D23"; /* GBF_ENA_RESET */ + pins = "GPIO171_D23"; /* GBF_ENA_RESET */ ste,config = <&gpio_out_lo>; }; }; @@ -503,13 +503,13 @@ * These are plain GPIO pins used by WLAN */ snowball_cfg1 { - ste,pins = + pins = "GPIO161_D21", /* WLAN_PMU_EN */ "GPIO215_AH13"; /* WLAN_ENA */ ste,config = <&gpio_out_lo>; }; snowball_cfg2 { - ste,pins = "GPIO216_AG12"; /* WLAN_IRQ */ + pins = "GPIO216_AG12"; /* WLAN_IRQ */ ste,config = <&gpio_in_pu>; }; }; |