ARM: dts: socfpga: update missing reset property peripherals

Add reset property for gpio, i2c, sdmmc, nand, qspi, spi, uart, and
watchdog on base socfpga and socfpga_arria10.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>

1 files changed, 12 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index dcb8fba3d709..f365003f0102 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -585,6 +585,7 @@
 			compatible = "snps,dw-apb-gpio";
 			reg = <0xff708000 0x1000>;
 			clocks = <&l4_mp_clk>;
+			resets = <&rst GPIO0_RESET>;
 			status = "disabled";
 
 			porta: gpio-controller@0 {
@@ -605,6 +606,7 @@
 			compatible = "snps,dw-apb-gpio";
 			reg = <0xff709000 0x1000>;
 			clocks = <&l4_mp_clk>;
+			resets = <&rst GPIO1_RESET>;
 			status = "disabled";
 
 			portb: gpio-controller@0 {
@@ -625,6 +627,7 @@
 			compatible = "snps,dw-apb-gpio";
 			reg = <0xff70a000 0x1000>;
 			clocks = <&l4_mp_clk>;
+			resets = <&rst GPIO2_RESET>;
 			status = "disabled";
 
 			portc: gpio-controller@0 {
@@ -735,6 +738,7 @@
 			#size-cells = <0>;
 			clocks = <&l4_mp_clk>, <&sdmmc_clk_divided>;
 			clock-names = "biu", "ciu";
+			resets = <&rst SDMMC_RESET>;
 			status = "disabled";
 		};
 
@@ -748,6 +752,7 @@
 			interrupts = <0x0 0x90 0x4>;
 			clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>;
 			clock-names = "nand", "nand_x", "ecc";
+			resets = <&rst NAND_RESET>;
 			status = "disabled";
 		};
 
@@ -767,6 +772,7 @@
 			cdns,fifo-width = <4>;
 			cdns,trigger-address = <0x00000000>;
 			clocks = <&qspi_clk>;
+			resets = <&rst QSPI_RESET>;
 			status = "disabled";
 		};
 
@@ -801,6 +807,7 @@
 			interrupts = <0 154 4>;
 			num-cs = <4>;
 			clocks = <&spi_m_clk>;
+			resets = <&rst SPIM0_RESET>;
 			status = "disabled";
 		};
 
@@ -812,6 +819,7 @@
 			interrupts = <0 155 4>;
 			num-cs = <4>;
 			clocks = <&spi_m_clk>;
+			resets = <&rst SPIM1_RESET>;
 			status = "disabled";
 		};
 
@@ -878,6 +886,7 @@
 			dmas = <&pdma 28>,
 			       <&pdma 29>;
 			dma-names = "tx", "rx";
+			resets = <&rst UART0_RESET>;
 		};
 
 		uart1: serial1@ffc03000 {
@@ -890,6 +899,7 @@
 			dmas = <&pdma 30>,
 			       <&pdma 31>;
 			dma-names = "tx", "rx";
+			resets = <&rst UART1_RESET>;
 		};
 
 		usbphy0: usbphy {
@@ -929,6 +939,7 @@
 			reg = <0xffd02000 0x1000>;
 			interrupts = <0 171 4>;
 			clocks = <&osc1>;
+			resets = <&rst L4WD0_RESET>;
 			status = "disabled";
 		};
 
@@ -937,6 +948,7 @@
 			reg = <0xffd03000 0x1000>;
 			interrupts = <0 172 4>;
 			clocks = <&osc1>;
+			resets = <&rst L4WD1_RESET>;
 			status = "disabled";
 		};
 	};