Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM Device-tree updates from Olof Johansson:
 "Besides new bindings and additional descriptions of hardware blocks
  for various SoCs and boards, the main new contents here is:

  SoCs:
   - Intel Agilex (SoCFPGA)
   - NXP i.MX8MM (Quad Cortex-A53 with media/graphics focus)

  New boards:
   - Allwinner:
      + RerVision H3-DVK (H3)
      + Oceanic 5205 5inMFD (H6)
      + Beelink GS2 (H6)
      + Orange Pi 3 (H6)
   - Rockchip:
      + Orange Pi RK3399
      + Nanopi NEO4
      + Veyron-Mighty Chromebook variant
   - Amlogic:
      + SEI Robotics SEI510
   - ST Micro:
      + stm32mp157a discovery1
      + stm32mp157c discovery2
   - NXP:
      + Eckelmann ci4x10 (i.MX6DL)
      + i.MX8MM EVK (i.MX8MM)
      + ZII i.MX7 RPU2 (i.MX7)
      + ZII SPB4 (VF610)
      + Zii Ultra (i.MX8M)
      + TQ TQMa7S (i.MX7Solo)
      + TQ TQMa7D (i.MX7Dual)
      + Kobo Aura (i.MX50)
      + Menlosystems M53 (i.MX53)j
   - Nvidia:
      + Jetson Nano (Tegra T210)"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (593 commits)
  arm64: dts: bitmain: Add UART pinctrl support for Sophon Edge
  arm64: dts: bitmain: Add pinctrl support for BM1880 SoC
  arm64: dts: bitmain: Add GPIO Line names for Sophon Edge board
  arm64: dts: bitmain: Add GPIO support for BM1880 SoC
  ARM: dts: gemini: Indent DIR-685 partition table
  dt-bindings: hwmon (pwm-fan) Remove dead "cooling-*-state" properties
  ARM: dts: qcom-apq8064: Set 'cxo_board' as ref clock of the DSI PHY
  arm64: dts: msm8998: thermal: Restrict thermal zone name length to under 20
  arm64: dts: msm8998: thermal: Fix number of supported sensors
  arm64: dts: msm8998-mtp: thermal: Remove skin and battery thermal zones
  arm64: dts: exynos: Move fixed-clocks out of soc
  arm64: dts: exynos: Move pmu and timer nodes out of soc
  ARM: dts: s5pv210: Fix camera clock provider on Goni board
  ARM: dts: exynos: Properly override node to use MDMA0 on Universal C210
  ARM: dts: exynos: Move fixed-clocks out of soc on Exynos3250
  ARM: dts: exynos: Remove unneeded address/size cells from fixed-clock on Exynos3250
  ARM: dts: exynos: Move pmu and timer nodes out of soc
  arm64: dts: rockchip: fix IO domain voltage setting of APIO5 on rockpro64
  arm64: dts: db820c: Add sound card support
  arm64: dts: apq8096-db820c: Add HDMI display support
  ...

1 files changed, 57 insertions, 34 deletions

diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
index 192dbc089ade..1252522392c7 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -60,12 +60,19 @@
 		pinctrl-0 = <&bt_enable_l>, <&wifi_enable_h>;
 
 		/*
-		 * On the module itself this is one of these (depending
-		 * on the actual card populated):
+		 * Depending on the actual card populated GPIO4 D4 and D5
+		 * correspond to one of these signals on the module:
+		 *
+		 * D4:
 		 * - SDIO_RESET_L_WL_REG_ON
 		 * - PDN (power down when low)
+		 *
+		 * D5:
+		 * - BT_I2S_WS_BT_RFDISABLE_L
+		 * - No connect
 		 */
-		reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>,
+			      <&gpio4 RK_PD5 GPIO_ACTIVE_LOW>;
 	};
 
 	vcc_5v: vcc-5v {
@@ -93,6 +100,23 @@
 		regulator-boot-on;
 		vin-supply = <&vcc_5v>;
 	};
+
+	vdd_logic: vdd-logic {
+		compatible = "pwm-regulator";
+		regulator-name = "vdd_logic";
+
+		pwms = <&pwm1 0 1994 0>;
+		pwm-supply = <&vcc33_sys>;
+
+		pwm-dutycycle-range = <0x7b 0>;
+		pwm-dutycycle-unit = <0x94>;
+
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-ramp-delay = <4000>;
+	};
 };
 
 &cpu0 {
@@ -193,8 +217,7 @@
 				regulator-max-microvolt = <1250000>;
 				regulator-ramp-delay = <6001>;
 				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1000000>;
+					regulator-off-in-suspend;
 				};
 			};
 
@@ -376,10 +399,6 @@
 &uart0 {
 	status = "okay";
 
-	/* We need to go faster than 24MHz, so adjust clock parents / rates */
-	assigned-clocks = <&cru SCLK_UART0>;
-	assigned-clock-rates = <48000000>;
-
 	/* Pins don't include flow control by default; add that in */
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
@@ -431,10 +450,14 @@
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <
 		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
 		&global_pwroff
 	>;
 	pinctrl-1 = <
 		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
 		&global_pwroff
 	>;
 
@@ -458,13 +481,13 @@
 
 	buttons {
 		pwr_key_l: pwr-key-l {
-			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	emmc {
 		emmc_reset: emmc-reset {
-			rockchip,pins = <2 9 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
 		/*
@@ -472,51 +495,51 @@
 		 * We also have external pulls, so disable the internal ones.
 		 */
 		emmc_clk: emmc-clk {
-			rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
+			rockchip,pins = <3 RK_PC2 2 &pcfg_pull_none_drv_8ma>;
 		};
 
 		emmc_cmd: emmc-cmd {
-			rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
+			rockchip,pins = <3 RK_PC0 2 &pcfg_pull_none_drv_8ma>;
 		};
 
 		emmc_bus8: emmc-bus8 {
-			rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
-					<3 1 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
-					<3 2 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
-					<3 3 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
-					<3 4 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
-					<3 5 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
-					<3 6 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
-					<3 7 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
+			rockchip,pins = <3 RK_PA0 2 &pcfg_pull_none_drv_8ma>,
+					<3 RK_PA1 2 &pcfg_pull_none_drv_8ma>,
+					<3 RK_PA2 2 &pcfg_pull_none_drv_8ma>,
+					<3 RK_PA3 2 &pcfg_pull_none_drv_8ma>,
+					<3 RK_PA4 2 &pcfg_pull_none_drv_8ma>,
+					<3 RK_PA5 2 &pcfg_pull_none_drv_8ma>,
+					<3 RK_PA6 2 &pcfg_pull_none_drv_8ma>,
+					<3 RK_PA7 2 &pcfg_pull_none_drv_8ma>;
 		};
 	};
 
 	pmic {
 		pmic_int_l: pmic-int-l {
-			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	reboot {
 		ap_warm_reset_h: ap-warm-reset-h {
-			rockchip,pins = <RK_GPIO0 13 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	recovery-switch {
 		rec_mode_l: rec-mode-l {
-			rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	sdio0 {
 		wifi_enable_h: wifienable-h {
-			rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
 		/* NOTE: mislabelled on schematic; should be bt_enable_h */
 		bt_enable_l: bt-enable-l {
-			rockchip,pins = <4 29 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
 		/*
@@ -524,30 +547,30 @@
 		 * We also have external pulls, so disable the internal ones.
 		 */
 		sdio0_bus4: sdio0-bus4 {
-			rockchip,pins = <4 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
-					<4 21 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
-					<4 22 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
-					<4 23 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+			rockchip,pins = <4 RK_PC4 1 &pcfg_pull_none_drv_8ma>,
+					<4 RK_PC5 1 &pcfg_pull_none_drv_8ma>,
+					<4 RK_PC6 1 &pcfg_pull_none_drv_8ma>,
+					<4 RK_PC7 1 &pcfg_pull_none_drv_8ma>;
 		};
 
 		sdio0_cmd: sdio0-cmd {
-			rockchip,pins = <4 24 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+			rockchip,pins = <4 RK_PD0 1 &pcfg_pull_none_drv_8ma>;
 		};
 
 		sdio0_clk: sdio0-clk {
-			rockchip,pins = <4 25 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+			rockchip,pins = <4 RK_PD1 1 &pcfg_pull_none_drv_8ma>;
 		};
 	};
 
 	tpm {
 		tpm_int_h: tpm-int-h {
-			rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <7 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	write-protect {
 		fw_wp_ap: fw-wp-ap {
-			rockchip,pins = <7 6 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <7 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 };