ARM: dts: imx: use nodes label in board dts

Following omap3-evm.dts way, it changes all imx dts files to use label
in board dts to refer to nodes defined by soc dtsi.  Thus, the board
dts files become easier to read and edit with the least indentation
levels.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

1 files changed, 93 insertions, 101 deletions

diff --git a/arch/arm/boot/dts/imx53-evk.dts b/arch/arm/boot/dts/imx53-evk.dts
index a124d1e25258..85a89b52f9b8 100644
--- a/arch/arm/boot/dts/imx53-evk.dts
+++ b/arch/arm/boot/dts/imx53-evk.dts
@@ -21,107 +21,6 @@
 		reg = <0x70000000 0x80000000>;
 	};
 
-	soc {
-		aips@50000000 { /* AIPS1 */
-			spba@50000000 {
-				esdhc@50004000 { /* ESDHC1 */
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_esdhc1_1>;
-					cd-gpios = <&gpio3 13 0>;
-					wp-gpios = <&gpio3 14 0>;
-					status = "okay";
-				};
-
-				ecspi@50010000 { /* ECSPI1 */
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_ecspi1_1>;
-					fsl,spi-num-chipselects = <2>;
-					cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
-					status = "okay";
-
-					flash: at45db321d@1 {
-						#address-cells = <1>;
-						#size-cells = <1>;
-						compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
-						spi-max-frequency = <25000000>;
-						reg = <1>;
-
-						partition@0 {
-							label = "U-Boot";
-							reg = <0x0 0x40000>;
-							read-only;
-						};
-
-						partition@40000 {
-							label = "Kernel";
-							reg = <0x40000 0x3c0000>;
-						};
-					};
-				};
-
-				esdhc@50020000 { /* ESDHC3 */
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_esdhc3_1>;
-					cd-gpios = <&gpio3 11 0>;
-					wp-gpios = <&gpio3 12 0>;
-					status = "okay";
-				};
-			};
-
-			iomuxc@53fa8000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_hog>;
-
-				hog {
-					pinctrl_hog: hoggrp {
-						fsl,pins = <
-							424  0x80000000	/* MX53_PAD_EIM_EB2__GPIO2_30 */
-							449  0x80000000	/* MX53_PAD_EIM_D19__GPIO3_19 */
-							693  0x80000000	/* MX53_PAD_EIM_DA11__GPIO3_11 */
-							697  0x80000000	/* MX53_PAD_EIM_DA12__GPIO3_12 */
-							701  0x80000000	/* MX53_PAD_EIM_DA13__GPIO3_13 */
-							705  0x80000000	/* MX53_PAD_EIM_DA14__GPIO3_14 */
-							868  0x80000000	/* MX53_PAD_PATA_DA_0__GPIO7_6 */
-							873  0x80000000	/* MX53_PAD_PATA_DA_1__GPIO7_7 */
-						>;
-					};
-				};
-			};
-
-			uart1: serial@53fbc000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_uart1_1>;
-				status = "okay";
-			};
-		};
-
-		aips@60000000 {	/* AIPS2 */
-			i2c@63fc4000 { /* I2C2 */
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_i2c2_1>;
-				status = "okay";
-
-				pmic: mc13892@08 {
-					compatible = "fsl,mc13892", "fsl,mc13xxx";
-					reg = <0x08>;
-				};
-
-				codec: sgtl5000@0a {
-					compatible = "fsl,sgtl5000";
-					reg = <0x0a>;
-				};
-			};
-
-			ethernet@63fec000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_fec_1>;
-				phy-mode = "rmii";
-				phy-reset-gpios = <&gpio7 6 0>;
-				status = "okay";
-			};
-		};
-	};
-
 	leds {
 		compatible = "gpio-leds";
 
@@ -132,3 +31,96 @@
 		};
 	};
 };
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1_1>;
+	cd-gpios = <&gpio3 13 0>;
+	wp-gpios = <&gpio3 14 0>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1_1>;
+	fsl,spi-num-chipselects = <2>;
+	cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
+	status = "okay";
+
+	flash: at45db321d@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
+		spi-max-frequency = <25000000>;
+		reg = <1>;
+
+		partition@0 {
+			label = "U-Boot";
+			reg = <0x0 0x40000>;
+			read-only;
+		};
+
+		partition@40000 {
+			label = "Kernel";
+			reg = <0x40000 0x3c0000>;
+		};
+	};
+};
+
+&esdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc3_1>;
+	cd-gpios = <&gpio3 11 0>;
+	wp-gpios = <&gpio3 12 0>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	hog {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				424  0x80000000	/* MX53_PAD_EIM_EB2__GPIO2_30 */
+				449  0x80000000	/* MX53_PAD_EIM_D19__GPIO3_19 */
+				693  0x80000000	/* MX53_PAD_EIM_DA11__GPIO3_11 */
+				697  0x80000000	/* MX53_PAD_EIM_DA12__GPIO3_12 */
+				701  0x80000000	/* MX53_PAD_EIM_DA13__GPIO3_13 */
+				705  0x80000000	/* MX53_PAD_EIM_DA14__GPIO3_14 */
+				868  0x80000000	/* MX53_PAD_PATA_DA_0__GPIO7_6 */
+				873  0x80000000	/* MX53_PAD_PATA_DA_1__GPIO7_7 */
+			>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2_1>;
+	status = "okay";
+
+	pmic: mc13892@08 {
+		compatible = "fsl,mc13892", "fsl,mc13xxx";
+		reg = <0x08>;
+	};
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec_1>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio7 6 0>;
+	status = "okay";
+};