summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/bcm2835.dtsi
diff options
context:
space:
mode:
authorEric Anholt <eric@anholt.net>2015-09-29 00:22:05 +0300
committerEric Anholt <eric@anholt.net>2015-10-23 12:03:55 +0300
commit94cb7f76caa0b337acea7c9442a75083a0712c18 (patch)
tree121bd5a7e8343fddc81825bf3fe4bf9a780e25c3 /arch/arm/boot/dts/bcm2835.dtsi
parent83e7f6e16e796a23028a67211424189e9f14e54f (diff)
downloadlinux-94cb7f76caa0b337acea7c9442a75083a0712c18.tar.xz
ARM: bcm2835: Switch to using the new clock driver support.
This will give us the ability to set the pixel and HDMI state machine clocks for the VC4 KMS driver, change the CPU frequency, and potentially gate clocks in the future (once we also write a power domain driver). It also gives the uart an explicit clock reference, so that we don't need to change the physical addresses of the old fixed clk_bcm2835.c clocks for Raspberry Pi 2 port. Two clocks get their frequencies updated as a result of this. One is uart's apb_pclk, which was previously accidentally grabbing the fixed uart0_pclk due to the apb_pclk not having clk_register_clkdev() called. The uart doesn't seem to do anything with apb_pclk other than make sure it's on, so that appears safe (also, as far as I can see, the apb clock is actually the same as the VPU clock). The other is EMMC, which according to the docs was supposed to be in the 50-100Mhz range, but it turns out the firmware needed to change to running it at the 250Mhz core clock speed to avoid a bug in clock domain crossing. Additionally, anything using BCM2835_CLOCK_VPU will now have a correct clock rate if the user configures the boot-time core clock speed using config.txt. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Diffstat (limited to 'arch/arm/boot/dts/bcm2835.dtsi')
-rw-r--r--arch/arm/boot/dts/bcm2835.dtsi52
1 files changed, 28 insertions, 24 deletions
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index 202939486598..46804b3c4387 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -1,4 +1,5 @@
#include <dt-bindings/pinctrl/bcm2835.h>
+#include <dt-bindings/clock/bcm2835.h>
#include "skeleton.dtsi"
/ {
@@ -21,6 +22,10 @@
compatible = "brcm,bcm2835-system-timer";
reg = <0x7e003000 0x1000>;
interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
+ /* This could be a reference to BCM2835_CLOCK_TIMER,
+ * but we don't have the driver using the common clock
+ * support yet.
+ */
clock-frequency = <1000000>;
};
@@ -57,6 +62,17 @@
reg = <0x7e100000 0x28>;
};
+ clocks: cprman@7e101000 {
+ compatible = "brcm,bcm2835-cprman";
+ #clock-cells = <1>;
+ reg = <0x7e101000 0x2000>;
+
+ /* CPRMAN derives everything from the platform's
+ * oscillator.
+ */
+ clocks = <&clk_osc>;
+ };
+
rng@7e104000 {
compatible = "brcm,bcm2835-rng";
reg = <0x7e104000 0x10>;
@@ -96,7 +112,9 @@
compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
reg = <0x7e201000 0x1000>;
interrupts = <2 25>;
- clock-frequency = <3000000>;
+ clocks = <&clocks BCM2835_CLOCK_UART>,
+ <&clocks BCM2835_CLOCK_VPU>;
+ clock-names = "uartclk", "apb_pclk";
arm,primecell-periphid = <0x00241011>;
};
@@ -115,7 +133,7 @@
compatible = "brcm,bcm2835-spi";
reg = <0x7e204000 0x1000>;
interrupts = <2 22>;
- clocks = <&clk_spi>;
+ clocks = <&clocks BCM2835_CLOCK_VPU>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -125,7 +143,7 @@
compatible = "brcm,bcm2835-i2c";
reg = <0x7e205000 0x1000>;
interrupts = <2 21>;
- clocks = <&clk_i2c>;
+ clocks = <&clocks BCM2835_CLOCK_VPU>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -135,7 +153,7 @@
compatible = "brcm,bcm2835-sdhci";
reg = <0x7e300000 0x100>;
interrupts = <2 30>;
- clocks = <&clk_mmc>;
+ clocks = <&clocks BCM2835_CLOCK_EMMC>;
status = "disabled";
};
@@ -143,7 +161,7 @@
compatible = "brcm,bcm2835-i2c";
reg = <0x7e804000 0x1000>;
interrupts = <2 21>;
- clocks = <&clk_i2c>;
+ clocks = <&clocks BCM2835_CLOCK_VPU>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -165,28 +183,14 @@
#address-cells = <1>;
#size-cells = <0>;
- clk_mmc: clock@0 {
- compatible = "fixed-clock";
- reg = <0>;
- #clock-cells = <0>;
- clock-output-names = "mmc";
- clock-frequency = <100000000>;
- };
-
- clk_i2c: clock@1 {
+ /* The oscillator is the root of the clock tree. */
+ clk_osc: clock@3 {
compatible = "fixed-clock";
- reg = <1>;
+ reg = <3>;
#clock-cells = <0>;
- clock-output-names = "i2c";
- clock-frequency = <250000000>;
+ clock-output-names = "osc";
+ clock-frequency = <19200000>;
};
- clk_spi: clock@2 {
- compatible = "fixed-clock";
- reg = <2>;
- #clock-cells = <0>;
- clock-output-names = "spi";
- clock-frequency = <250000000>;
- };
};
};