Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM Devicetree updates from Olof Johansson:
 "As usual, most of the changes are to devicetrees.

  Besides smaller fixes, some refactorings and cleanups, some of the new
  platforms and chips (or significant features) supported are below:

  Broadcom boards:
   - Cisco Meraki MR32 (BCM53016-based)
   - BCM2711 (RPi4) display pipeline support

  Actions Semi boards:
   - Caninos Loucos Labrador SBC (S500-based)
   - RoseapplePi SBC (S500-based)

  Allwinner SoCs/boards:
   - A100 SoC with Perf1 board
   - Mali, DMA, Cetrus and IR support for R40 SoC

  Amlogic boards:
   - Libretch S905x CC V2 board
   - Hardkernel ODROID-N2+ board

  Aspeed boards/platforms:
   - Wistron Mowgli (AST2500-based, Power9 OpenPower server)
   - Facebook Wedge400 (AST2500-based, ToR switch)

  Hisilicon SoC:
   - SD5203 SoC

  Nvidia boards:
   - Tegra234 VDK, for pre-silicon Orin SoC

  NXP i.MX boards:
   - Librem 5 phone
   - i.MX8MM DDR4 EVK
   - Variscite VAR-SOM-MX8MN SoM
   - Symphony board
   - Tolino Shine 2 HD
   - TQMa6 SoM
   - Y Soft IOTA Orion

  Rockchip boards:
   - NanoPi R2S board
   - A95X-Z2 board
   - more Rock-Pi4 variants

  STM32 boards:
   - Odyssey SOM board (STM32MP157CAC-based)
   - DH DRC02 board

  Toshiba SoCs/boards:
   - Visconti SoC and TPMV7708 board"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (638 commits)
  ARM: dts: nspire: Fix SP804 users
  arm64: dts: lg: Fix SP804 users
  arm64: dts: lg: Fix SP805 clocks
  ARM: mstar: Fix up the fallout from moving the dts/dtsi files
  ARM: mstar: Add mstar prefix to all of the dtsi/dts files
  ARM: mstar: Add interrupt to pm_uart
  ARM: mstar: Add interrupt controller to base dtsi
  ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
  arm64: dts: ti: k3-j7200-common-proc-board: Add USB support
  arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function
  arm64: dts: ti: k3-j7200-main: Add USB controller
  arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX
  arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux
  dt-bindings: ti-serdes-mux: Add defines for J7200 SoC
  ARM: dts: hisilicon: add SD5203 dts
  ARM: dts: hisilicon: fix the system controller compatible nodes
  arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1
  arm64: dts: zynqmp: Remove undocumented u-boot properties
  arm64: dts: zynqmp: Remove additional compatible string for i2c IPs
  arm64: dts: zynqmp: Rename buses to be align with simple-bus yaml
  ...

1 files changed, 40 insertions, 37 deletions

diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi
index 8a67bb29e3b7..c220dc3c4e0f 100644
--- a/arch/arm/boot/dts/am437x-l4.dtsi
+++ b/arch/arm/boot/dts/am437x-l4.dtsi
@@ -520,54 +520,57 @@
 			#size-cells = <1>;
 			ranges = <0x0 0x100000 0x8000>;
 
-			mac: ethernet@0 {
-				compatible = "ti,am4372-cpsw","ti,cpsw";
-				reg = <0x0 0x800
-				       0x1200 0x100>;
+			mac_sw: switch@0 {
+				compatible = "ti,am4372-cpsw","ti,cpsw-switch";
+				reg = <0x0 0x4000>;
+				ranges = <0 0 0x4000>;
+				clocks = <&cpsw_125mhz_gclk>, <&dpll_clksel_mac_clk>;
+				clock-names = "fck", "50mclk";
+				assigned-clocks = <&dpll_clksel_mac_clk>;
+				assigned-clock-rates = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				syscon = <&scm_conf>;
+				status = "disabled";
+
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH
 					      GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH
 					      GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH
 					      GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>,
-					 <&dpll_clksel_mac_clk>;
-				clock-names = "fck", "cpts", "50mclk";
-				assigned-clocks = <&dpll_clksel_mac_clk>;
-				assigned-clock-rates = <50000000>;
-				status = "disabled";
-				cpdma_channels = <8>;
-				ale_entries = <1024>;
-				bd_ram_size = <0x2000>;
-				mac_control = <0x20>;
-				slaves = <2>;
-				active_slave = <0>;
-				cpts_clock_mult = <0x80000000>;
-				cpts_clock_shift = <29>;
-				ranges = <0 0 0x8000>;
-				syscon = <&scm_conf>;
+				interrupt-names = "rx_thresh", "rx", "tx", "misc";
 
-				davinci_mdio: mdio@1000 {
-					compatible = "ti,am4372-mdio","ti,cpsw-mdio","ti,davinci_mdio";
-					reg = <0x1000 0x100>;
-					clocks = <&cpsw_125mhz_clkctrl AM4_CPSW_125MHZ_CPGMAC0_CLKCTRL 0>;
-					clock-names = "fck";
+				ethernet-ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
-					bus_freq = <1000000>;
-					status = "disabled";
+
+					cpsw_port1: port@1 {
+						reg = <1>;
+						label = "port1";
+						mac-address = [ 00 00 00 00 00 00 ];
+						phys = <&phy_gmii_sel 1 0>;
+					};
+
+					cpsw_port2: port@2 {
+						reg = <2>;
+						label = "port2";
+						mac-address = [ 00 00 00 00 00 00 ];
+						phys = <&phy_gmii_sel 2 0>;
+					};
 				};
 
-				cpsw_emac0: slave@200 {
-					/* Filled in by U-Boot */
-					mac-address = [ 00 00 00 00 00 00 ];
-					phys = <&phy_gmii_sel 1 0>;
+				davinci_mdio_sw: mdio@1000 {
+					compatible = "ti,am4372-mdio", "ti,cpsw-mdio","ti,davinci_mdio";
+					clocks = <&cpsw_125mhz_gclk>;
+					clock-names = "fck";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					bus_freq = <1000000>;
+					reg = <0x1000 0x100>;
 				};
 
-				cpsw_emac1: slave@300 {
-					/* Filled in by U-Boot */
-					mac-address = [ 00 00 00 00 00 00 ];
-					phys = <&phy_gmii_sel 2 0>;
+				cpts {
+					clocks = <&cpsw_cpts_rft_clk>;
+					clock-names = "cpts";
 				};
 			};
 		};