Merge tag 'sound-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "The amount of changes is smaller at this round (what a surprise), but
  lots of activity is seen. Most of changes are about ASoC driver
  development, especially Intel platforms. Here are some highlights:

  General:
   - Replace all tasklet usages with other alternatives
   - Cleanup of the ASoC error unwinding code
   - Fixes for trivial issues caught by static checker
   - Spell fixes allover the places

  ALSA Core:
   - Lockdep fix for control devices
   - Fix for potential OSS sequencer mutex stalls

  HD-audio and USB-audio:
   - SoundBlaster AE-7 support
   - Changes in quirk table for the rename handling
   - Quirks for HP and ASUS machines, Pioneer DJ DJM-250MK2.

  ASoC:
   - Lots of updates for Intel SOF and SoundWire enablement
   - Replacement of the DSP driver for some older x86 systems; the new
     code was written from scratch, better maintenance expected
   - Helpers for parsing auxiluary devices from the device tree
   - New support for AllWinner A64, Cirrus Logic CS4234, Mediatek MT6359
     Microchip S/PDIF TX and RX controllers, Realtek RT1015P, and Texas
     Instruments J721E, TAS2110, TAS2564 and TAS2764"

* tag 'sound-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (498 commits)
  ALSA: hda/hdmi: fix incorrect locking in hdmi_pcm_close
  ALSA: hda: fix jack detection with Realtek codecs when in D3
  ALSA: fireworks: use semicolons rather than commas to separate statements
  ALSA: hda: use semicolons rather than commas to separate statements
  ALSA: hda/i915 - fix list corruption with concurrent probes
  ASoC: dmaengine: Document support for TX only or RX only streams
  ASoC: mchp-spdiftx: remove 'TX' from playback stream name
  ASoC: ti: davinci-mcasp: Use &pdev->dev for early dev_warn
  ASoC: tas2764: Add the driver for the TAS2764
  dt-bindings: tas2764: Add the TAS2764 binding doc
  ASoC: Intel: catpt: Add explicit DMADEVICES kconfig dependency
  ASoC: Intel: catpt: Fix compilation when CONFIG_MODULES is disabled
  ASoC: stm32: dfsdm: add actual resolution trace
  ASoC: stm32: dfsdm: change rate limits
  ASoC: qcom: sc7180: Add support for audio over DP
  Asoc: qcom: lpass-platform : Increase buffer size
  ASoC: qcom: Add support for lpass hdmi driver
  Asoc: qcom: lpass:Update lpaif_dmactl members order
  Asoc:qcom:lpass-cpu:Update dts property read API
  ASoC: dt-bindings: Add dt binding for lpass hdmi
  ...

39 files changed, 979 insertions, 225 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-pci-devices-catpt b/Documentation/ABI/testing/sysfs-bus-pci-devices-catpt
new file mode 100644
index 000000000000..8a200f4eefbd
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-pci-devices-catpt
@@ -0,0 +1,16 @@
+What:		/sys/devices/pci0000:00/<dev>/fw_version
+Date:		September 2020
+Contact:	Cezary Rojewski <cezary.rojewski@intel.com>
+Description:
+		Version of AudioDSP firmware ASoC catpt driver is
+		communicating with.
+		Format: %d.%d.%d.%d, type:major:minor:build.
+
+What:		/sys/devices/pci0000:00/<dev>/fw_info
+Date:		September 2020
+Contact:	Cezary Rojewski <cezary.rojewski@intel.com>
+Description:
+		Detailed AudioDSP firmware build information including
+		build hash and log-providers hash. This information is
+		obtained during initial handshake with firmware.
+		Format: %s.
diff --git a/Documentation/devicetree/bindings/sound/ak4458.txt b/Documentation/devicetree/bindings/sound/ak4458.txt
index e5820235e0d5..0416c14895d6 100644
--- a/Documentation/devicetree/bindings/sound/ak4458.txt
+++ b/Documentation/devicetree/bindings/sound/ak4458.txt
@@ -10,6 +10,11 @@ Required properties:
 Optional properties:
 - reset-gpios: A GPIO specifier for the power down & reset pin
 - mute-gpios: A GPIO specifier for the soft mute pin
+- AVDD-supply: Analog power supply
+- DVDD-supply: Digital power supply
+- dsd-path: Select DSD input pins for ak4497
+            0: select #16, #17, #19 pins
+            1: select #3, #4, #5 pins
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/sound/ak5558.txt b/Documentation/devicetree/bindings/sound/ak5558.txt
index 7d67ca6ced80..36934098170c 100644
--- a/Documentation/devicetree/bindings/sound/ak5558.txt
+++ b/Documentation/devicetree/bindings/sound/ak5558.txt
@@ -10,6 +10,8 @@ Required properties:
 Optional properties:
 
 - reset-gpios: A GPIO specifier for the power down & reset pin.
+- AVDD-supply: Analog power supply
+- DVDD-supply: Digital power supply
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun8i-a33-codec.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun8i-a33-codec.yaml
index 55d28268d2f4..67405e6d8168 100644
--- a/Documentation/devicetree/bindings/sound/allwinner,sun8i-a33-codec.yaml
+++ b/Documentation/devicetree/bindings/sound/allwinner,sun8i-a33-codec.yaml
@@ -15,7 +15,11 @@ properties:
     const: 0
 
   compatible:
-    const: allwinner,sun8i-a33-codec
+    oneOf:
+      - items:
+          - const: allwinner,sun50i-a64-codec
+          - const: allwinner,sun8i-a33-codec
+      - const: allwinner,sun8i-a33-codec
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs4234.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs4234.yaml
new file mode 100644
index 000000000000..156560b2a980
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cirrus,cs4234.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/cirrus,cs4234.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic cs4234 audio CODEC
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description:
+  The CS4234 is a highly versatile CODEC that combines 4 channels of
+  high performance analog to digital conversion, 4 channels of high
+  performance digital to analog conversion for audio, and 1 channel of
+  digital to analog conversion to provide a nondelayed audio reference
+  signal to an external Class H tracking power supply. If not used to
+  drive a tracking power supply, the 5th DAC can instead be used as a
+  standard audio grade DAC, with performance specifications identical
+  to that of the 4 DACs in the audio path. Additionally, the CS4234
+  includes tunable group delay for each of the 4 audio DAC paths to
+  provide lead time for the external switch-mode power supply, and a
+  nondelayed path into the DAC outputs for input signals requiring a
+  low-latency path to the outputs.
+
+properties:
+  compatible:
+    enum:
+      - cirrus,cs4234
+
+  reg:
+    description:
+      The 7-bit I2C address depends on the state of the ADx pins, in
+      binary given by [0 0 1 0 AD2 AD1 AD0 0].
+    items:
+      minimum: 0x10
+      maximum: 0x17
+
+  VA-supply:
+    description:
+      Analogue power supply.
+
+  VL-supply:
+    description:
+      Interface power supply.
+
+  reset-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - VA-supply
+  - VL-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c@e0004000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0xe0004000 0x1000>;
+
+        cs4234: codec@11 {
+            compatible = "cirrus,cs4234";
+            reg = <0x11>;
+
+            VA-supply = <&vdd3v3>;
+            VL-supply = <&vdd3v3>;
+
+            reset-gpios = <&gpio 0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.txt b/Documentation/devicetree/bindings/sound/fsl,spdif.txt
deleted file mode 100644
index e1365b0ee1e9..000000000000
--- a/Documentation/devicetree/bindings/sound/fsl,spdif.txt
+++ /dev/null
@@ -1,68 +0,0 @@
-Freescale Sony/Philips Digital Interface Format (S/PDIF) Controller
-
-The Freescale S/PDIF audio block is a stereo transceiver that allows the
-processor to receive and transmit digital audio via an coaxial cable or
-a fibre cable.
-
-Required properties:
-
-  - compatible		: Compatible list, should contain one of the following
-			  compatibles:
-			  "fsl,imx35-spdif",
-			  "fsl,vf610-spdif",
-			  "fsl,imx6sx-spdif",
-
-  - reg			: Offset and length of the register set for the device.
-
-  - interrupts		: Contains the spdif interrupt.
-
-  - dmas		: Generic dma devicetree binding as described in
-			  Documentation/devicetree/bindings/dma/dma.txt.
-
-  - dma-names		: Two dmas have to be defined, "tx" and "rx".
-
-  - clocks		: Contains an entry for each entry in clock-names.
-
-  - clock-names		: Includes the following entries:
-	"core"		  The core clock of spdif controller.
-	"rxtx<0-7>"	  Clock source list for tx and rx clock.
-			  This clock list should be identical to the source
-			  list connecting to the spdif clock mux in "SPDIF
-			  Transceiver Clock Diagram" of SoC reference manual.
-			  It can also be referred to TxClk_Source bit of
-			  register SPDIF_STC.
-	"spba"		  The spba clock is required when SPDIF is placed as a
-			  bus slave of the Shared Peripheral Bus and when two
-			  or more bus masters (CPU, DMA or DSP) try to access
-			  it. This property is optional depending on the SoC
-			  design.
-
-Optional properties:
-
-   - big-endian		: If this property is absent, the native endian mode
-			  will be in use as default, or the big endian mode
-			  will be in use for all the device registers.
-
-Example:
-
-spdif: spdif@2004000 {
-	compatible = "fsl,imx35-spdif";
-	reg = <0x02004000 0x4000>;
-	interrupts = <0 52 0x04>;
-	dmas = <&sdma 14 18 0>,
-	       <&sdma 15 18 0>;
-	dma-names = "rx", "tx";
-
-	clocks = <&clks 197>, <&clks 3>,
-	       <&clks 197>, <&clks 107>,
-	       <&clks 0>, <&clks 118>,
-	       <&clks 62>, <&clks 139>,
-	       <&clks 0>;
-	clock-names = "core", "rxtx0",
-		"rxtx1", "rxtx2",
-		"rxtx3", "rxtx4",
-		"rxtx5", "rxtx6",
-		"rxtx7";
-
-	big-endian;
-};
diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.yaml b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml
new file mode 100644
index 000000000000..2ac671f5cb9b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,spdif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Sony/Philips Digital Interface Format (S/PDIF) Controller
+
+maintainers:
+  - Shengjiu Wang <shengjiu.wang@nxp.com>
+
+description: |
+  The Freescale S/PDIF audio block is a stereo transceiver that allows the
+  processor to receive and transmit digital audio via an coaxial cable or
+  a fibre cable.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx35-spdif
+      - fsl,vf610-spdif
+      - fsl,imx6sx-spdif
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for RX
+      - description: DMA controller phandle and request line for TX
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  clocks:
+    items:
+      - description: The core clock of spdif controller.
+      - description: Clock for tx0 and rx0.
+      - description: Clock for tx1 and rx1.
+      - description: Clock for tx2 and rx2.
+      - description: Clock for tx3 and rx3.
+      - description: Clock for tx4 and rx4.
+      - description: Clock for tx5 and rx5.
+      - description: Clock for tx6 and rx6.
+      - description: Clock for tx7 and rx7.
+      - description: The spba clock is required when SPDIF is placed as a bus
+          slave of the Shared Peripheral Bus and when two or more bus masters
+          (CPU, DMA or DSP) try to access it. This property is optional depending
+          on the SoC design.
+    minItems: 9
+
+  clock-names:
+    items:
+      - const: core
+      - const: rxtx0
+      - const: rxtx1
+      - const: rxtx2
+      - const: rxtx3
+      - const: rxtx4
+      - const: rxtx5
+      - const: rxtx6
+      - const: rxtx7
+      - const: spba
+    minItems: 9
+
+  big-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      If this property is absent, the native endian mode will be in use
+      as default, or the big endian mode will be in use for all the device
+      registers. Set this flag for HCDs with big endian descriptors and big
+      endian registers.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dmas
+  - dma-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    spdif@2004000 {
+        compatible = "fsl,imx35-spdif";
+        reg = <0x02004000 0x4000>;
+        interrupts = <0 52 0x04>;
+        dmas = <&sdma 14 18 0>,
+               <&sdma 15 18 0>;
+        dma-names = "rx", "tx";
+        clocks = <&clks 197>, <&clks 3>,
+                 <&clks 197>, <&clks 107>,
+                 <&clks 0>, <&clks 118>,
+                 <&clks 62>, <&clks 139>,
+                 <&clks 0>;
+        clock-names = "core", "rxtx0",
+                      "rxtx1", "rxtx2",
+                      "rxtx3", "rxtx4",
+                      "rxtx5", "rxtx6",
+                      "rxtx7";
+        big-endian;
+    };
diff --git a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt
index 63ebf52b43e8..f339be62e7e4 100644
--- a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt
+++ b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt
@@ -38,6 +38,8 @@ The compatible list for this generic sound card currently:
 
  "fsl,imx-audio-wm8524"
 
+ "fsl,imx-audio-tlv320aic32x4"
+
 Required properties:
 
   - compatible		: Contains one of entries in the compatible list.
diff --git a/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml b/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml
index 6cbdd8857ea2..d346e61ab708 100644
--- a/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml
+++ b/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml
@@ -17,6 +17,7 @@ properties:
   compatible:
     enum:
       - intel,keembay-i2s
+      - intel,keembay-tdm
 
   "#sound-dai-cells":
     const: 0
diff --git a/Documentation/devicetree/bindings/sound/max98090.txt b/Documentation/devicetree/bindings/sound/max98090.txt
index 7e1bbd5c27fd..39d640294c62 100644
--- a/Documentation/devicetree/bindings/sound/max98090.txt
+++ b/Documentation/devicetree/bindings/sound/max98090.txt
@@ -55,5 +55,5 @@ audio-codec@10 {
 	compatible = "maxim,max98090";
 	reg = <0x10>;
 	interrupt-parent = <&gpio>;
-	interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+	interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_LEVEL_HIGH>;
 };
diff --git a/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml b/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml
new file mode 100644
index 000000000000..7d8bd4e14434
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mchp,spdifrx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip S/PDIF Rx Controller Device Tree Bindings
+
+maintainers:
+  - Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
+
+description:
+        The Microchip Sony/Philips Digital Interface Receiver is a
+        serial port compliant with the IEC-60958 standard.
+
+properties:
+  "#sound-dai-cells":
+    const: 0
+
+  compatible:
+    const: microchip,sama7g5-spdifrx
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Peripheral Bus Clock
+      - description: Generic Clock
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: gclk
+
+  dmas:
+    description: RX DMA Channel
+    maxItems: 1
+
+  dma-names:
+    const: rx
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    spdifrx: spdifrx@e1614000 {
+        #sound-dai-cells = <0>;
+        compatible = "microchip,sama7g5-spdifrx";
+        reg = <0xe1614000 0x4000>;
+        interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&dma0 AT91_XDMAC_DT_PERID(49)>;
+        dma-names = "rx";
+        clocks = <&pmc PMC_TYPE_PERIPHERAL 84>, <&pmc PMC_TYPE_GCK 84>;
+        clock-names = "pclk", "gclk";
+    };
diff --git a/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml b/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml
new file mode 100644
index 000000000000..a03b0b871fc9
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mchp,spdiftx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip S/PDIF Tx Controller Device Tree Bindings
+
+maintainers:
+  - Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
+
+description:
+        The Microchip Sony/Philips Digital Interface Transmitter is a
+        serial port compliant with the IEC-60958 standard.
+
+properties:
+  "#sound-dai-cells":
+    const: 0
+
+  compatible:
+    const: microchip,sama7g5-spdiftx
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Peripheral Bus Clock
+      - description: Generic Clock
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: gclk
+
+  dmas:
+    description: TX DMA Channel
+    maxItems: 1
+
+  dma-names:
+    const: tx
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    spdiftx@e1618000 {
+        #sound-dai-cells = <0>;
+        compatible = "microchip,sama7g5-spdiftx";
+        reg = <0xe1618000 0x4000>;
+        interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&dma0 AT91_XDMAC_DT_PERID(50)>;
+        dma-names = "tx";
+        clocks = <&pmc PMC_TYPE_PERIPHERAL 85>, <&pmc PMC_TYPE_GCK 85>;
+        clock-names = "pclk", "gclk";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_spdiftx_default>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/mt6359.yaml b/Documentation/devicetree/bindings/sound/mt6359.yaml
new file mode 100644
index 000000000000..a54f466f769d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mt6359.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mt6359.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT6359 Codec Device Tree Bindings
+
+maintainers:
+  - Eason Yen <eason.yen@mediatek.com>
+  - Jiaxin Yu <jiaxin.yu@mediatek.com>
+  - Shane Chien <shane.chien@mediatek.com>
+
+description: |
+  The communication between MT6359 and SoC is through Mediatek PMIC wrapper.
+  For more detail, please visit Mediatek PMIC wrapper documentation.
+  Must be a child node of PMIC wrapper.
+
+properties:
+  mediatek,dmic-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Indicates how many data pins are used to transmit two channels of PDM
+      signal. 0 means two wires, 1 means one wire. Default value is 0.
+    enum:
+      - 0 # one wire
+      - 1 # two wires
+
+  mediatek,mic-type-0:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Specifies the type of mic type connected to adc0
+
+    enum:
+      - 0 # IDLE - mic in turn-off status
+      - 1 # ACC - analog mic with alternating coupling
+      - 2 # DMIC - digital mic
+      - 3 # DCC - analog mic with direct couping
+      - 4 # DCC_ECM_DIFF - analog electret condenser mic with differential mode
+      - 5 # DCC_ECM_SINGLE - analog electret condenser mic with single mode
+
+  mediatek,mic-type-1:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Specifies the type of mic type connected to adc1
+
+  mediatek,mic-type-2:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Specifies the type of mic type connected to adc2
+
+additionalProperties: false
+
+examples:
+  - |
+    mt6359codec: mt6359codec {
+      mediatek,dmic-mode = <0>;
+      mediatek,mic-type-0 = <2>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/mt8183-da7219-max98357.txt b/Documentation/devicetree/bindings/sound/mt8183-da7219-max98357.txt
index 6787ce8789dd..f276dfc74b46 100644
--- a/Documentation/devicetree/bindings/sound/mt8183-da7219-max98357.txt
+++ b/Documentation/devicetree/bindings/sound/mt8183-da7219-max98357.txt
@@ -3,6 +3,7 @@ MT8183 with MT6358, DA7219, MAX98357, and RT1015 CODECS
 Required properties:
 - compatible : "mediatek,mt8183_da7219_max98357" for MAX98357A codec
                "mediatek,mt8183_da7219_rt1015" for RT1015 codec
+               "mediatek,mt8183_da7219_rt1015p" for RT1015P codec
 - mediatek,headset-codec: the phandles of da7219 codecs
 - mediatek,platform: the phandle of MT8183 ASoC platform
 
diff --git a/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt b/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt
index 84b28dbe9f15..23998262a0a7 100644
--- a/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt
@@ -34,6 +34,13 @@ Required properties:
 			  * DMIC
 			  * Ext Spk
 
+Optional properties:
+
+- aux-devs		: A list of phandles for auxiliary devices (e.g. analog
+			  amplifiers) that do not appear directly within the DAI
+			  links. Should be connected to another audio component
+			  using "qcom,audio-routing".
+
 Dai-link subnode properties and subnodes:
 
 Required dai-link subnodes:
diff --git a/Documentation/devicetree/bindings/sound/qcom,apq8096.txt b/Documentation/devicetree/bindings/sound/qcom,apq8096.txt
index c814e867850f..e1b9fa8a5bf8 100644
--- a/Documentation/devicetree/bindings/sound/qcom,apq8096.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,apq8096.txt
@@ -55,6 +55,14 @@ This binding describes the APQ8096 sound card, which uses qdsp for audio.
 	Value type: <stringlist>
 	Definition: The user-visible name of this sound card.
 
+- aux-devs
+	Usage: optional
+	Value type: <array of phandles>
+	Definition: A list of phandles for auxiliary devices (e.g. analog
+		    amplifiers) that do not appear directly within the DAI
+		    links. Should be connected to another audio component
+		    using "audio-routing".
+
 = dailinks
 Each subnode of sndcard represents either a dailink, and subnodes of each
 dailinks would be cpu/codec/platform dais.
diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
deleted file mode 100644
index 32c2cdb3d32f..000000000000
--- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
+++ /dev/null
@@ -1,79 +0,0 @@
-* Qualcomm Technologies LPASS CPU DAI
-
-This node models the Qualcomm Technologies Low-Power Audio SubSystem (LPASS).
-
-Required properties:
-
-- compatible		: "qcom,lpass-cpu" or "qcom,apq8016-lpass-cpu"
-- clocks		: Must contain an entry for each entry in clock-names.
-- clock-names		: A list which must include the following entries:
-				* "ahbix-clk"
-				* "mi2s-osr-clk"
-				* "mi2s-bit-clk"
-			: required clocks for "qcom,lpass-cpu-apq8016"
-				* "ahbix-clk"
-				* "mi2s-bit-clk0"
-				* "mi2s-bit-clk1"
-				* "mi2s-bit-clk2"
-				* "mi2s-bit-clk3"
-				* "pcnoc-mport-clk"
-				* "pcnoc-sway-clk"
-
-- interrupts		: Must contain an entry for each entry in
-			  interrupt-names.
-- interrupt-names	: A list which must include the following entries:
-				* "lpass-irq-lpaif"
-- pinctrl-N		: One property must exist for each entry in
-			  pinctrl-names.  See ../pinctrl/pinctrl-bindings.txt
-			  for details of the property values.
-- pinctrl-names		: Must contain a "default" entry.
-- reg			: Must contain an address for each entry in reg-names.
-- reg-names		: A list which must include the following entries:
-				* "lpass-lpaif"
-- #address-cells	: Must be 1
-- #size-cells		: Must be 0
-
-
-
-Optional properties:
-
-- qcom,adsp		: Phandle for the audio DSP node
-
-By default, the driver uses up to 4 MI2S SD lines, for a total of 8 channels.
-The SD lines to use can be configured by adding subnodes for each of the DAIs.
-
-Required properties for each DAI (represented by a subnode):
-- reg			: Must be one of the DAI IDs
-			  (usually part of dt-bindings header)
-- qcom,playback-sd-lines: List of serial data lines to use for playback
-			  Each SD line should be represented by a number from 0-3.
-- qcom,capture-sd-lines	: List of serial data lines to use for capture
-			  Each SD line should be represented by a number from 0-3.
-
-Note that adding a subnode changes the default to "no lines configured",
-so both playback and capture lines should be configured when a subnode is added.
-
-Example:
-
-lpass@28100000 {
-	compatible = "qcom,lpass-cpu";
-	clocks = <&lcc AHBIX_CLK>, <&lcc MI2S_OSR_CLK>, <&lcc MI2S_BIT_CLK>;
-	clock-names = "ahbix-clk", "mi2s-osr-clk", "mi2s-bit-clk";
-	interrupts = <0 85 1>;
-	interrupt-names = "lpass-irq-lpaif";
-	pinctrl-names = "default", "idle";
-	pinctrl-0 = <&mi2s_default>;
-	pinctrl-1 = <&mi2s_idle>;
-	reg = <0x28100000 0x10000>;
-	reg-names = "lpass-lpaif";
-	qcom,adsp = <&adsp>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	/* Optional to set different MI2S SD lines */
-	dai@3 {
-		reg = <MI2S_QUATERNARY>;
-		qcom,playback-sd-lines = <0 1>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
new file mode 100644
index 000000000000..f6f9fb49f385
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
@@ -0,0 +1,219 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,lpass-cpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies Inc. LPASS CPU dai driver bindings
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+  - Rohit kumar <rohitkr@codeaurora.org>
+
+description: |
+  Qualcomm Technologies Inc. SOC Low-Power Audio SubSystem (LPASS) that consist
+  of MI2S interface for audio data transfer on external codecs. LPASS cpu driver
+  is a module to configure Low-Power Audio Interface(LPAIF) core registers
+  across different IP versions.
+
+properties:
+  compatible:
+    enum:
+      - qcom,lpass-cpu
+      - qcom,apq8016-lpass-cpu
+      - qcom,sc7180-lpass-cpu
+
+  reg:
+    maxItems: 2
+    description: LPAIF core registers
+  reg-names:
+     maxItems: 2
+  clocks:
+    minItems: 3
+    maxItems: 6
+
+  clock-names:
+    minItems: 3
+    maxItems: 6
+
+  interrupts:
+    maxItems: 2
+    description: LPAIF DMA buffer interrupt
+  interrupt-names:
+    maxItems: 2
+  qcom,adsp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Phandle for the audio DSP node
+
+  iommus:
+    maxItems: 2
+    description: Phandle to apps_smmu node with sid mask
+
+  power-domains:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^dai-link@[0-9a-f]$":
+    type: object
+    description: |
+      LPASS CPU dai node for each I2S device. Bindings of each node
+      depends on the specific driver providing the functionality and
+      properties.
+    properties:
+      reg:
+        maxItems: 1
+        description: Must be one of the DAI ID
+
+      qcom,playback-sd-lines:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        description: list of MI2S data lines for playback
+
+      qcom,capture-sd-lines:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        description: list of MI2S data lines for capture
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - '#sound-dai-cells'
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,lpass-cpu
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: ahbix-clk
+            - const: mi2s-osr-clk
+            - const: mi2s-bit-clk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,apq8016-lpass-cpu
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: ahbix-clk
+            - const: mi2s-bit-clk0
+            - const: mi2s-bit-clk1
+            - const: mi2s-bit-clk2
+            - const: mi2s-bit-clk3
+            - const: pcnoc-mport-clk
+            - const: pcnoc-sway-clk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,sc7180-lpass-cpu
+
+    then:
+      properties:
+        clock-names:
+          oneOf:
+           - items:   #for I2S
+              - const: pcnoc-sway-clk
+              - const: audio-core
+              - const: mclk0
+              - const: pcnoc-mport-clk
+              - const: mi2s-bit-clk0
+              - const: mi2s-bit-clk1
+           - items:   #for HDMI
+              - const: pcnoc-sway-clk
+              - const: audio-core
+              - const: pcnoc-mport-clk
+        reg-names:
+          anyOf:
+            - items:   #for I2S
+              - const: lpass-lpaif
+            - items:   #for I2S and HDMI
+              - const: lpass-hdmiif
+              - const: lpass-lpaif
+        interrupt-names:
+          anyOf:
+            - items:   #for I2S
+              - const: lpass-irq-lpaif
+            - items:   #for I2S and HDMI
+              - const: lpass-irq-lpaif
+              - const: lpass-irq-hdmi
+      required:
+        - iommus
+        - power-domains
+
+examples:
+  - |
+    #include <dt-bindings/sound/sc7180-lpass.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        lpass@62d80000 {
+            compatible = "qcom,sc7180-lpass-cpu";
+
+            reg = <0 0x62d87000 0 0x68000>,
+                  <0 0x62f00000 0 0x29000>;
+            reg-names = "lpass-hdmiif",
+                        "lpass-lpaif";
+            iommus = <&apps_smmu 0x1020 0>,
+                     <&apps_smmu 0x1032 0>;
+            power-domains = <&lpass_hm 0>;
+
+            clocks = <&gcc 131>,
+                 <&lpasscorecc 6>,
+                 <&lpasscorecc 7>,
+                 <&lpasscorecc 10>,
+                 <&lpasscorecc 8>,
+                 <&lpasscorecc 9>;
+
+            clock-names = "pcnoc-sway-clk", "audio-core",
+                          "mclk0", "pcnoc-mport-clk",
+                          "mi2s-bit-clk0", "mi2s-bit-clk1";
+
+            interrupts = <0 160 1>,
+                         <0 268 1>;
+            interrupt-names = "lpass-irq-lpaif",
+                              "lpass-irq-hdmi";
+            #sound-dai-cells = <1>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+            /* Optional to set different MI2S SD lines */
+            dai-link@0 {
+                reg = <MI2S_PRIMARY>;
+                qcom,playback-sd-lines = <1>;
+                qcom,capture-sd-lines = <0>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
index 4916dd6a0896..2d6fb2ea75a0 100644
--- a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
@@ -98,6 +98,24 @@ configuration of each dai. Must contain the following properties.
 		0 - MSB
 		1 - LSB
 
+= AFE CLOCKSS
+"clocks" subnode of the AFE node. It represents q6afe clocks
+"clocks" node should have following properties.
+- compatible:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be "qcom,q6afe-clocks"
+
+- #clock-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: Must be 2. Clock Id followed by
+		below valid clock coupling attributes.
+		1 - for no coupled clock
+		2 - for dividend of the coupled clock
+		3 - for divisor of the coupled clock
+		4 - for inverted and no couple clock
+
 = EXAMPLE
 
 apr-service@4 {
@@ -175,4 +193,9 @@ apr-service@4 {
 			qcom,sd-lines = <1>;
 		};
 	};
+
+	clocks {
+		compatible = "qcom,q6afe-clocks";
+		#clock-cells = <2>;
+	};
 };
diff --git a/Documentation/devicetree/bindings/sound/qcom,sdm845.txt b/Documentation/devicetree/bindings/sound/qcom,sdm845.txt
index ca8c89e88bfa..de4c604641da 100644
--- a/Documentation/devicetree/bindings/sound/qcom,sdm845.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,sdm845.txt
@@ -24,6 +24,14 @@ This binding describes the SDM845 sound card, which uses qdsp for audio.
 	Value type: <stringlist>
 	Definition: The user-visible name of this sound card.
 
+- aux-devs
+	Usage: optional
+	Value type: <array of phandles>
+	Definition: A list of phandles for auxiliary devices (e.g. analog
+		    amplifiers) that do not appear directly within the DAI
+		    links. Should be connected to another audio component
+		    using "audio-routing".
+
 = dailinks
 Each subnode of sndcard represents either a dailink, and subnodes of each
 dailinks would be cpu/codec/platform dais.
diff --git a/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml b/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml
new file mode 100644
index 000000000000..def1db298eac
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/realtek,rt1015p.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek rt1015p codec devicetree bindings
+
+maintainers:
+  - Tzung-Bi Shih <tzungbi@google.com>
+
+description: |
+  Rt1015p is a rt1015 variant which does not support I2C and
+  only supports S24, 48kHz, 64FS.
+
+properties:
+  compatible:
+    const: realtek,rt1015p
+
+  sdb-gpios:
+    description:
+      GPIO used for shutdown control.
+      0 means shut down; 1 means power on.
+    maxItems: 1
+
+required:
+  - compatible
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    rt1015p: rt1015p {
+        compatible = "realtek,rt1015p";
+        sdb-gpios = <&pio 175 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml b/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml
index 7bad6f16fe60..62a61b68dfef 100644
--- a/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml
+++ b/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml
@@ -27,6 +27,7 @@ properties:
           - enum:
               - rockchip,rk3188-spdif
               - rockchip,rk3288-spdif
+              - rockchip,rk3308-spdif
           - const: rockchip,rk3066-spdif
 
   reg:
diff --git a/Documentation/devicetree/bindings/sound/rt5640.txt b/Documentation/devicetree/bindings/sound/rt5640.txt
index e40e4893eed8..ff1228713f7e 100644
--- a/Documentation/devicetree/bindings/sound/rt5640.txt
+++ b/Documentation/devicetree/bindings/sound/rt5640.txt
@@ -88,7 +88,7 @@ rt5640 {
 	compatible = "realtek,rt5640";
 	reg = <0x1c>;
 	interrupt-parent = <&gpio>;
-	interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
+	interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
 	realtek,ldo1-en-gpios =
 		<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
 };
diff --git a/Documentation/devicetree/bindings/sound/rt5659.txt b/Documentation/devicetree/bindings/sound/rt5659.txt
index 1766e0543fc5..56788f50b6cf 100644
--- a/Documentation/devicetree/bindings/sound/rt5659.txt
+++ b/Documentation/devicetree/bindings/sound/rt5659.txt
@@ -72,7 +72,7 @@ rt5659 {
 	compatible = "realtek,rt5659";
 	reg = <0x1b>;
 	interrupt-parent = <&gpio>;
-	interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
+	interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
 	realtek,ldo1-en-gpios =
 		<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
 };
diff --git a/Documentation/devicetree/bindings/sound/rt5665.txt b/Documentation/devicetree/bindings/sound/rt5665.txt
index 8df170506986..f6ca96b4ce98 100644
--- a/Documentation/devicetree/bindings/sound/rt5665.txt
+++ b/Documentation/devicetree/bindings/sound/rt5665.txt
@@ -62,7 +62,7 @@ rt5659 {
 	compatible = "realtek,rt5665";
 	reg = <0x1b>;
 	interrupt-parent = <&gpio>;
-	interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
+	interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
 	realtek,ldo1-en-gpios =
 		<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
 };
diff --git a/Documentation/devicetree/bindings/sound/rt5668.txt b/Documentation/devicetree/bindings/sound/rt5668.txt
index c88b96e7764b..a2b7e9a2f2f3 100644
--- a/Documentation/devicetree/bindings/sound/rt5668.txt
+++ b/Documentation/devicetree/bindings/sound/rt5668.txt
@@ -41,7 +41,7 @@ rt5668 {
 	compatible = "realtek,rt5668b";
 	reg = <0x1a>;
 	interrupt-parent = <&gpio>;
-	interrupts = <TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>;
+	interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_LEVEL_HIGH>;
 	realtek,ldo1-en-gpios =
 		<&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
 	realtek,dmic1-data-pin = <1>;
diff --git a/Documentation/devicetree/bindings/sound/rt5677.txt b/Documentation/devicetree/bindings/sound/rt5677.txt
index 1b3c13d206ff..da2430099181 100644
--- a/Documentation/devicetree/bindings/sound/rt5677.txt
+++ b/Documentation/devicetree/bindings/sound/rt5677.txt
@@ -64,7 +64,7 @@ rt5677 {
 	compatible = "realtek,rt5677";
 	reg = <0x2c>;
 	interrupt-parent = <&gpio>;
-	interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
+	interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
 
 	gpio-controller;
 	#gpio-cells = <2>;
diff --git a/Documentation/devicetree/bindings/sound/rt5682.txt b/Documentation/devicetree/bindings/sound/rt5682.txt
index ade1ece8b45f..707fa98d1310 100644
--- a/Documentation/devicetree/bindings/sound/rt5682.txt
+++ b/Documentation/devicetree/bindings/sound/rt5682.txt
@@ -58,7 +58,7 @@ rt5682 {
 	compatible = "realtek,rt5682i";
 	reg = <0x1a>;
 	interrupt-parent = <&gpio>;
-	interrupts = <TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>;
+	interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_LEVEL_HIGH>;
 	realtek,ldo1-en-gpios =
 		<&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
 	realtek,dmic1-data-pin = <1>;
diff --git a/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml b/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml
index 902a0b66628e..1c6947294825 100644
--- a/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml
+++ b/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml
@@ -11,12 +11,11 @@ maintainers:
 
 properties:
   compatible:
-    oneOf:
-      - const: samsung,aries-wm8994
-        description: With FM radio and modem master
-
-      - const: samsung,fascinate4g-wm8994
-        description: Without FM radio and modem slave
+    enum:
+      # With FM radio and modem master
+      - samsung,aries-wm8994
+      # Without FM radio and modem slave
+      - samsung,fascinate4g-wm8994
 
   model:
     $ref: /schemas/types.yaml#/definitions/string
diff --git a/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml b/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml
index 1c755de686f7..578928e67e5c 100644
--- a/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml
+++ b/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml
@@ -21,7 +21,8 @@ properties:
     type: object
     properties:
       sound-dai:
-        $ref: /schemas/types.yaml#/definitions/phandle
+        $ref: /schemas/types.yaml#/definitions/phandle-array
+        maxItems: 1
         description: phandle to the I2S controller
     required:
       - sound-dai
@@ -30,7 +31,8 @@ properties:
     type: object
     properties:
       sound-dai:
-        $ref: /schemas/types.yaml#/definitions/phandle
+        $ref: /schemas/types.yaml#/definitions/phandle-array
+        maxItems: 1
         description: phandle to the WM1811 CODEC
     required:
       - sound-dai
diff --git a/Documentation/devicetree/bindings/sound/samsung,odroid.yaml b/Documentation/devicetree/bindings/sound/samsung,odroid.yaml
index 8ff2d39e7d17..e8122bc87362 100644
--- a/Documentation/devicetree/bindings/sound/samsung,odroid.yaml
+++ b/Documentation/devicetree/bindings/sound/samsung,odroid.yaml
@@ -28,6 +28,11 @@ properties:
     $ref: /schemas/types.yaml#/definitions/string
     description: The user-visible name of this sound complex.
 
+  assigned-clock-parents: true
+  assigned-clock-rates: true
+  assigned-clocks: true
+  clocks: true
+
   cpu:
     type: object
     properties:
diff --git a/Documentation/devicetree/bindings/sound/samsung-i2s.yaml b/Documentation/devicetree/bindings/sound/samsung-i2s.yaml
index b2ad093d94df..2e3628ef48df 100644
--- a/Documentation/devicetree/bindings/sound/samsung-i2s.yaml
+++ b/Documentation/devicetree/bindings/sound/samsung-i2s.yaml
@@ -41,6 +41,12 @@ properties:
       - samsung,exynos7-i2s
       - samsung,exynos7-i2s1
 
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
   reg:
     maxItems: 1
 
@@ -58,6 +64,9 @@ properties:
           - const: rx
           - const: tx-sec
 
+  assigned-clock-parents: true
+  assigned-clocks: true
+
   clocks:
     minItems: 1
     maxItems: 3
@@ -92,6 +101,9 @@ properties:
           - const: i2s_cdclk2
     description: Names of the CDCLK I2S output clocks.
 
+  interrupts:
+    maxItems: 1
+
   samsung,idma-addr:
     $ref: /schemas/types.yaml#/definitions/uint32
     description: |
@@ -104,6 +116,9 @@ properties:
   pinctrl-names:
     const: default
 
+  power-domains:
+    maxItems: 1
+
   "#sound-dai-cells":
     const: 1
 
diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.yaml b/Documentation/devicetree/bindings/sound/sgtl5000.yaml
index 4f29b63c54d3..d116c174b545 100644
--- a/Documentation/devicetree/bindings/sound/sgtl5000.yaml
+++ b/Documentation/devicetree/bindings/sound/sgtl5000.yaml
@@ -19,6 +19,10 @@ properties:
   "#sound-dai-cells":
     const: 0
 
+  assigned-clock-parents: true
+  assigned-clock-rates: true
+  assigned-clocks: true
+
   clocks:
     items:
       - description: the clock provider of SYS_MCLK
diff --git a/Documentation/devicetree/bindings/sound/tas2562.txt b/Documentation/devicetree/bindings/sound/tas2562.txt
deleted file mode 100644
index dc6d7362ded7..000000000000
--- a/Documentation/devicetree/bindings/sound/tas2562.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Texas Instruments TAS2562 Smart PA
-
-The TAS2562 is a mono, digital input Class-D audio amplifier optimized for
-efficiently driving high peak power into small loudspeakers.
-Integrated speaker voltage and current sense provides for
-real time monitoring of loudspeaker behavior.
-
-Required properties:
- - #address-cells  - Should be <1>.
- - #size-cells     - Should be <0>.
- - compatible:	   - Should contain "ti,tas2562", "ti,tas2563".
- - reg:		   - The i2c address. Should be 0x4c, 0x4d, 0x4e or 0x4f.
- - ti,imon-slot-no:- TDM TX current sense time slot.
- - ti,vmon-slot-no:- TDM TX voltage sense time slot. This slot must always be
-		     greater then ti,imon-slot-no.
-
-Optional properties:
-- interrupt-parent: phandle to the interrupt controller which provides
-                    the interrupt.
-- interrupts: (GPIO) interrupt to which the chip is connected.
-- shut-down-gpio: GPIO used to control the state of the device.
-
-Examples:
-tas2562@4c {
-        #address-cells = <1>;
-        #size-cells = <0>;
-        compatible = "ti,tas2562";
-        reg = <0x4c>;
-
-        interrupt-parent = <&gpio1>;
-        interrupts = <14>;
-
-	shut-down-gpio = <&gpio1 15 0>;
-        ti,imon-slot-no = <0>;
-        ti,vmon-slot-no = <1>;
-};
-
diff --git a/Documentation/devicetree/bindings/sound/tas2562.yaml b/Documentation/devicetree/bindings/sound/tas2562.yaml
index 8d75a798740b..27f7132ba2ef 100644
--- a/Documentation/devicetree/bindings/sound/tas2562.yaml
+++ b/Documentation/devicetree/bindings/sound/tas2562.yaml
@@ -16,11 +16,19 @@ description: |
   Integrated speaker voltage and current sense provides for
   real time monitoring of loudspeaker behavior.
 
+  Specifications about the audio amplifier can be found at:
+    https://www.ti.com/lit/gpn/tas2562
+    https://www.ti.com/lit/gpn/tas2563
+    https://www.ti.com/lit/gpn/tas2564
+    https://www.ti.com/lit/gpn/tas2110
+
 properties:
   compatible:
     enum:
       - ti,tas2562
       - ti,tas2563
+      - ti,tas2564
+      - ti,tas2110
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/sound/tas2764.yaml b/Documentation/devicetree/bindings/sound/tas2764.yaml
new file mode 100644
index 000000000000..5bf8c76ecda1
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/tas2764.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/sound/tas2764.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Texas Instruments TAS2764 Smart PA
+
+maintainers:
+  - Dan Murphy <dmurphy@ti.com>
+
+description: |
+  The TAS2764 is a mono, digital input Class-D audio amplifier optimized for
+  efficiently driving high peak power into small loudspeakers.
+  Integrated speaker voltage and current sense provides for
+  real time monitoring of loudspeaker behavior.
+
+properties:
+  compatible:
+    enum:
+      - ti,tas2764
+
+  reg:
+    maxItems: 1
+    description: |
+       I2C address of the device can be between 0x38 to 0x45.
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO used to reset the device.
+
+  shutdown-gpios:
+    maxItems: 1
+    description: GPIO used to control the state of the device.
+
+  interrupts:
+    maxItems: 1
+
+  ti,imon-slot-no:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: TDM TX current sense time slot.
+
+  ti,vmon-slot-no:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: TDM TX voltage sense time slot.
+
+  '#sound-dai-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+   #include <dt-bindings/gpio/gpio.h>
+   i2c0 {
+     #address-cells = <1>;
+     #size-cells = <0>;
+     codec: codec@38 {
+       compatible = "ti,tas2764";
+       reg = <0x38>;
+       #sound-dai-cells = <1>;
+       interrupt-parent = <&gpio1>;
+       interrupts = <14>;
+       reset-gpios = <&gpio1 15 0>;
+       shutdown-gpios = <&gpio1 15 0>;
+       ti,imon-slot-no = <0>;
+       ti,vmon-slot-no = <2>;
+     };
+   };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/tas2770.yaml b/Documentation/devicetree/bindings/sound/tas2770.yaml
index 33a90f829c80..07e7f9951d2e 100644
--- a/Documentation/devicetree/bindings/sound/tas2770.yaml
+++ b/Documentation/devicetree/bindings/sound/tas2770.yaml
@@ -24,11 +24,14 @@ properties:
   reg:
     maxItems: 1
     description: |
-       I2C address of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f
+       I2C address of the device can be between 0x41 to 0x48.
 
   reset-gpio:
     description: GPIO used to reset the device.
 
+  shutdown-gpios:
+    description: GPIO used to control the state of the device.
+
   interrupts:
     maxItems: 1
 
@@ -41,6 +44,7 @@ properties:
     description: TDM TX voltage sense time slot.
 
   ti,asi-format:
+    deprecated: true
     $ref: /schemas/types.yaml#/definitions/uint32
     description: Sets TDM RX capture edge.
     enum:
@@ -62,13 +66,14 @@ examples:
    i2c0 {
      #address-cells = <1>;
      #size-cells = <0>;
-     codec: codec@4c {
+     codec: codec@41 {
        compatible = "ti,tas2770";
-       reg = <0x4c>;
+       reg = <0x41>;
        #sound-dai-cells = <1>;
        interrupt-parent = <&gpio1>;
        interrupts = <14>;
        reset-gpio = <&gpio1 15 0>;
+       shutdown-gpios = <&gpio1 14 0>;
        ti,imon-slot-no = <0>;
        ti,vmon-slot-no = <2>;
      };
diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
index d52cfbeb2d07..805da4d6a88e 100644
--- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
+++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
@@ -18,18 +18,25 @@ description: |
   PLL15 (for 44.1KHz). The same PLLs are used for McASP10's AUXCLK clock via
   different HSDIVIDER.
 
-  Clocking setup for 48KHz family:
-  PLL4 ---> PLL4_HSDIV0 ---> MCASP10_AUXCLK ---> McASP10.auxclk
-        |-> PLL4_HSDIV2 ---> AUDIO_REFCLK2  ---> pcm3168a.SCKI
+  Clocking setup for j721e:
+    48KHz family:
+    PLL4 ---> PLL4_HSDIV0 ---> MCASP10_AUXCLK ---> McASP10.auxclk
+          |-> PLL4_HSDIV2 ---> AUDIO_REFCLK2  ---> pcm3168a.SCKI
 
-  Clocking setup for 44.1KHz family:
-  PLL15 ---> PLL15_HSDIV0 ---> MCASP10_AUXCLK ---> McASP10.auxclk
-         |-> PLL15_HSDIV2 ---> AUDIO_REFCLK2  ---> pcm3168a.SCKI
+    44.1KHz family:
+    PLL15 ---> PLL15_HSDIV0 ---> MCASP10_AUXCLK ---> McASP10.auxclk
+           |-> PLL15_HSDIV2 ---> AUDIO_REFCLK2  ---> pcm3168a.SCKI
+
+  Clocking setup for j7200:
+    48KHz family:
+    PLL4 ---> PLL4_HSDIV0 ---> MCASP0_AUXCLK ---> McASP0.auxclk
+          |-> PLL4_HSDIV2 ---> AUDIO_REFCLK2  ---> pcm3168a.SCKI
 
 properties:
   compatible:
-    items:
-      - const: ti,j721e-cpb-audio
+    enum:
+      - ti,j721e-cpb-audio
+      - ti,j7200-cpb-audio
 
   model:
     $ref: /schemas/types.yaml#/definitions/string
@@ -44,22 +51,12 @@ properties:
     $ref: /schemas/types.yaml#/definitions/phandle
 
   clocks:
-    items:
-      - description: AUXCLK clock for McASP used by CPB audio
-      - description: Parent for CPB_McASP auxclk (for 48KHz)
-      - description: Parent for CPB_McASP auxclk (for 44.1KHz)
-      - description: SCKI clock for the pcm3168a codec on CPB
-      - description: Parent for CPB_SCKI clock (for 48KHz)
-      - description: Parent for CPB_SCKI clock (for 44.1KHz)
+    minItems: 4
+    maxItems: 6
 
   clock-names:
-    items:
-      - const: cpb-mcasp-auxclk
-      - const: cpb-mcasp-auxclk-48000
-      - const: cpb-mcasp-auxclk-44100
-      - const: cpb-codec-scki
-      - const: cpb-codec-scki-48000
-      - const: cpb-codec-scki-44100
+    minItems: 4
+    maxItems: 6
 
 required:
   - compatible
@@ -71,6 +68,57 @@ required:
 
 additionalProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,j721e-cpb-audio
+
+    then:
+      properties:
+        clocks:
+          minItems: 6
+          items:
+            - description: AUXCLK clock for McASP used by CPB audio
+            - description: Parent for CPB_McASP auxclk (for 48KHz)
+            - description: Parent for CPB_McASP auxclk (for 44.1KHz)
+            - description: SCKI clock for the pcm3168a codec on CPB
+            - description: Parent for CPB_SCKI clock (for 48KHz)
+            - description: Parent for CPB_SCKI clock (for 44.1KHz)
+
+        clock-names:
+          items:
+            - const: cpb-mcasp-auxclk
+            - const: cpb-mcasp-auxclk-48000
+            - const: cpb-mcasp-auxclk-44100
+            - const: cpb-codec-scki
+            - const: cpb-codec-scki-48000
+            - const: cpb-codec-scki-44100
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,j7200-cpb-audio
+
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+          items:
+            - description: AUXCLK clock for McASP used by CPB audio
+            - description: Parent for CPB_McASP auxclk (for 48KHz)
+            - description: SCKI clock for the pcm3168a codec on CPB
+            - description: Parent for CPB_SCKI clock (for 48KHz)
+
+        clock-names:
+          items:
+            - const: cpb-mcasp-auxclk
+            - const: cpb-mcasp-auxclk-48000
+            - const: cpb-codec-scki
+            - const: cpb-codec-scki-48000
+
 examples:
   - |+
     sound {
diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
index 1bff53d37118..df18be9d7b15 100644
--- a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
+++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
@@ -108,6 +108,12 @@ properties:
       maximum: 7
     default: [0, 0, 0, 0]
 
+  ti,asi-tx-drive:
+    type: boolean
+    description: |
+      When set the device will set the Tx ASI output to a Hi-Z state for unused
+      data cycles. Default is to drive the output low on unused ASI cycles.
+
 patternProperties:
   '^ti,gpo-config-[1-4]$':
     $ref: /schemas/types.yaml#/definitions/uint32-array
@@ -134,6 +140,49 @@ patternProperties:
        4d - Drive weak low and active high
        5d - Drive Hi-Z and active high
 
+  ti,gpio-config:
+    description: |
+       Defines the configuration and output drive for the General Purpose
+       Input and Output pin (GPIO1). Its value is a pair, the first value is for
+       the configuration type and the second value is for the output drive
+       type. The array is defined as <GPIO1_CFG GPIO1_DRV>
+
+       configuration for the GPIO pin can be one of the following:
+       0 - disabled
+       1 - GPIO1 is configured as a general-purpose output (GPO)
+       2 - (default) GPIO1 is configured as a device interrupt output (IRQ)
+       3 - GPIO1 is configured as a secondary ASI output (SDOUT2)
+       4 - GPIO1 is configured as a PDM clock output (PDMCLK)
+       8 - GPIO1 is configured as an input to control when MICBIAS turns on or
+           off (MICBIAS_EN)
+       9 - GPIO1 is configured as a general-purpose input (GPI)
+       10 - GPIO1 is configured as a master clock input (MCLK)
+       11 - GPIO1 is configured as an ASI input for daisy-chain (SDIN)
+       12 - GPIO1 is configured as a PDM data input for channel 1 and channel 2
+            (PDMDIN1)
+       13 - GPIO1 is configured as a PDM data input for channel 3 and channel 4
+            (PDMDIN2)
+       14 - GPIO1 is configured as a PDM data input for channel 5 and channel 6
+            (PDMDIN3)
+       15 - GPIO1 is configured as a PDM data input for channel 7 and channel 8
+            (PDMDIN4)
+
+       output drive type for the GPIO pin can be one of the following:
+       0 - Hi-Z output
+       1 - Drive active low and active high
+       2 - (default) Drive active low and weak high
+       3 - Drive active low and Hi-Z
+       4 - Drive weak low and active high
+       5 - Drive Hi-Z and active high
+
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+      - minItems: 2
+        maxItems: 2
+        items:
+          maximum: 15
+        default: [2, 2]
+
 required:
   - compatible
   - reg
@@ -152,6 +201,7 @@ examples:
         ti,mic-bias-source = <6>;
         ti,pdm-edge-select = <0 1 0 1>;
         ti,gpi-config = <4 5 6 7>;
+        ti,gpio-config = <10 2>;
         ti,gpo-config-1 = <0 0>;
         ti,gpo-config-2 = <0 0>;
         reset-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;