dt-bindings: Cleanup standard unit properties

Properties with standard unit suffixes already have a type and don't need
type definitions. They also default to a single entry, so 'maxItems: 1'
can be dropped.

adi,ad5758 is an oddball which defined an enum of arrays. While a valid
schema, it is simpler as a whole to only define scalar constraints.

Cc: Jean Delvare <jdelvare@suse.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: linux-hwmon@vger.kernel.org
Cc: linux-i2c@vger.kernel.org
Cc: linux-iio@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-input@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: linux-serial@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Cc: linux-watchdog@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sebastian Reichel <sre@kernel.org> # for power-supply
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio
Acked-by: Alexandre TORGUE <alexandre.torgue@foss.st.com>
Link: https://lore.kernel.org/r/20210128194515.743252-1-robh@kernel.org

25 files changed, 29 insertions, 56 deletions

diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
index 14cd727d3c4b..f02fd10de604 100644
--- a/Documentation/devicetree/bindings/arm/cpus.yaml
+++ b/Documentation/devicetree/bindings/arm/cpus.yaml
@@ -232,7 +232,6 @@ properties:
       by this cpu (see ./idle-states.yaml).
 
   capacity-dmips-mhz:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
     description:
       u32 value representing CPU capacity (see ./cpu-capacity.txt) in
       DMIPS/MHz, relative to highest capacity-dmips-mhz
diff --git a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml
index 5fe784f487c5..efdf59abb2e1 100644
--- a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml
+++ b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml
@@ -85,7 +85,6 @@ properties:
   wlf,micd-timeout-ms:
     description:
       Timeout for microphone detection, specified in milliseconds.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
 
   wlf,micd-force-micbias:
     description:
diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
index eef614962b10..bf04151b63d2 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
@@ -49,7 +49,6 @@ properties:
     description:
       This property controls the Accumulation Dead band which allows to set the
       level of current below which no accumulation takes place.
-    $ref: /schemas/types.yaml#/definitions/uint32
     maximum: 255
     default: 0
 
diff --git a/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml b/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml
index 00a6511354e6..5d3ce641fcde 100644
--- a/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml
+++ b/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml
@@ -73,11 +73,9 @@ properties:
     description: |
       Temperature sensor trimming factor. It can be used to manually adjust the
       temperature measurements within 7.130 degrees Celsius.
-    maxItems: 1
-    items:
-      default: 0
-      minimum: 0
-      maximum: 7130
+    default: 0
+    minimum: 0
+    maximum: 7130
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
index 8020d739a078..1502b22c77cc 100644
--- a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
+++ b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
@@ -52,7 +52,6 @@ properties:
   ti,bus-range-microvolt:
     description: |
       This is the operating range of the bus voltage in microvolt
-    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [16000000, 32000000]
     default: 32000000
 
diff --git a/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml b/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml
index cc3aa2a5e70b..ff99344788ab 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml
@@ -39,11 +39,9 @@ properties:
 
   i2c-gpio,delay-us:
     description: delay between GPIO operations (may depend on each platform)
-    $ref: /schemas/types.yaml#/definitions/uint32
 
   i2c-gpio,timeout-ms:
     description: timeout to get data
-    $ref: /schemas/types.yaml#/definitions/uint32
 
   # Deprecated properties, do not use in new device tree sources:
   gpios:
diff --git a/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml
index c22b66b6219e..d9293c57f573 100644
--- a/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml
@@ -66,21 +66,18 @@ properties:
     default: 400000
 
   i2c-sda-hold-time-ns:
-    maxItems: 1
     description: |
       The property should contain the SDA hold time in nanoseconds. This option
       is only supported in hardware blocks version 1.11a or newer or on
       Microsemi SoCs.
 
   i2c-scl-falling-time-ns:
-    maxItems: 1
     description: |
       The property should contain the SCL falling time in nanoseconds.
       This value is used to compute the tLOW period.
     default: 300
 
   i2c-sda-falling-time-ns:
-    maxItems: 1
     description: |
       The property should contain the SDA falling time in nanoseconds.
       This value is used to compute the tHIGH period.
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max9611.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max9611.yaml
index 9475a9e6e920..95774a55629d 100644
--- a/Documentation/devicetree/bindings/iio/adc/maxim,max9611.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max9611.yaml
@@ -23,7 +23,6 @@ properties:
     maxItems: 1
 
   shunt-resistor-micro-ohms:
-    $ref: /schemas/types.yaml#/definitions/uint32
     description: |
       Value in micro Ohms of the shunt resistor connected between the RS+ and
       RS- inputs, across which the current is measured.  Value needed to compute
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
index 28417b31b558..517e32976c30 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
@@ -246,7 +246,6 @@ patternProperties:
           Resolution (bits) to use for conversions:
             - can be 6, 8, 10 or 12 on stm32f4
             - can be 8, 10, 12, 14 or 16 on stm32h7 and stm32mp1
-        $ref: /schemas/types.yaml#/definitions/uint32
 
       st,adc-channels:
         description: |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml b/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml
index 692dacd0fee5..7b895784e008 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml
@@ -42,7 +42,6 @@ properties:
     const: 1
 
   ti,channel0-current-microamp:
-    $ref: /schemas/types.yaml#/definitions/uint32
     description: Channel 0 current in uA.
     enum:
       - 0
@@ -51,7 +50,6 @@ properties:
       - 20
 
   ti,channel3-current-microamp:
-    $ref: /schemas/types.yaml#/definitions/uint32
     description: Channel 3 current in uA.
     enum:
       - 0
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml
index 626ccb6fe21e..fd4edca34a28 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml
@@ -46,31 +46,42 @@ properties:
       two properties must be present:
 
   adi,range-microvolt:
-    $ref: /schemas/types.yaml#/definitions/int32-array
     description: |
       Voltage output range specified as <minimum, maximum>
-    enum:
-      - [[0, 5000000]]
-      - [[0, 10000000]]
-      - [[-5000000, 5000000]]
-      - [[-10000000, 10000000]]
+    oneOf:
+      - items:
+          - const: 0
+          - enum: [5000000, 10000000]
+      - items:
+          - const: -5000000
+          - const: 5000000
+      - items:
+          - const: -10000000
+          - const: 10000000
 
   adi,range-microamp:
-    $ref: /schemas/types.yaml#/definitions/int32-array
     description: |
       Current output range specified as <minimum, maximum>
-    enum:
-      - [[0, 20000]]
-      - [[0, 24000]]
-      - [[4, 24000]]
-      - [[-20000, 20000]]
-      - [[-24000, 24000]]
-      - [[-1000, 22000]]
+    oneOf:
+      - items:
+          - const: 0
+          - enum: [20000, 24000]
+      - items:
+          - const: 4
+          - const: 24000
+      - items:
+          - const: -20000
+          - const: 20000
+      - items:
+          - const: -24000
+          - const: 24000
+      - items:
+          - const: -1000
+          - const: 22000
 
   reset-gpios: true
 
   adi,dc-dc-ilim-microamp:
-    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [150000, 200000, 250000, 300000, 350000, 400000]
     description: |
       The dc-to-dc converter current limit.
diff --git a/Documentation/devicetree/bindings/iio/health/maxim,max30100.yaml b/Documentation/devicetree/bindings/iio/health/maxim,max30100.yaml
index 64b862637039..967778fb0ce8 100644
--- a/Documentation/devicetree/bindings/iio/health/maxim,max30100.yaml
+++ b/Documentation/devicetree/bindings/iio/health/maxim,max30100.yaml
@@ -21,7 +21,6 @@ properties:
     description: Connected to ADC_RDY pin.
 
   maxim,led-current-microamp:
-    $ref: /schemas/types.yaml#/definitions/uint32-array
     minItems: 2
     maxItems: 2
     description: |
diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
index a771a15f053f..046ace461cc9 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
@@ -70,11 +70,9 @@ properties:
 
   touchscreen-x-mm:
     description: horizontal length in mm of the touchscreen
-    $ref: /schemas/types.yaml#/definitions/uint32
 
   touchscreen-y-mm:
     description: vertical length in mm of the touchscreen
-    $ref: /schemas/types.yaml#/definitions/uint32
 
 dependencies:
   touchscreen-size-x: [ touchscreen-size-y ]
diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
index 186f04ba9357..e674bba52ee9 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
+++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
@@ -259,7 +259,6 @@ properties:
       waiting for I/O signalling and card power supply to be stable,
       regardless of whether pwrseq-simple is used. Default to 10ms if
       no available.
-    $ref: /schemas/types.yaml#/definitions/uint32
     default: 10
 
   supports-cqe:
diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml
index 6cd57863c1db..226fb191913d 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml
+++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml
@@ -41,13 +41,11 @@ properties:
     description:
       Delay in ms after powering the card and de-asserting the
       reset-gpios (if any).
-    $ref: /schemas/types.yaml#/definitions/uint32
 
   power-off-delay-us:
     description:
       Delay in us after asserting the reset-gpios (if any)
       during power off of the card.
-    $ref: /schemas/types.yaml#/definitions/uint32
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
index 0965f6515f9e..dac4aadb6e2e 100644
--- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
@@ -122,7 +122,6 @@ properties:
       such as flow control thresholds.
 
   rx-internal-delay-ps:
-    $ref: /schemas/types.yaml#/definitions/uint32
     description: |
       RGMII Receive Clock Delay defined in pico seconds.
       This is used for controllers that have configurable RX internal delays.
@@ -140,7 +139,6 @@ properties:
       is used for components that can have configurable fifo sizes.
 
   tx-internal-delay-ps:
-    $ref: /schemas/types.yaml#/definitions/uint32
     description: |
       RGMII Transmit Clock Delay defined in pico seconds.
       This is used for controllers that have configurable TX internal delays.
diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index b2f6083f556a..9ac77b8cb767 100644
--- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -208,7 +208,6 @@ properties:
       Triplet of delays. The 1st cell is reset pre-delay in micro
       seconds. The 2nd cell is reset pulse in micro seconds. The 3rd
       cell is reset post-delay in micro seconds.
-    $ref: /schemas/types.yaml#/definitions/uint32-array
     minItems: 3
     maxItems: 3
 
diff --git a/Documentation/devicetree/bindings/power/supply/battery.yaml b/Documentation/devicetree/bindings/power/supply/battery.yaml
index 0c7e2e44793b..c3b4b7543591 100644
--- a/Documentation/devicetree/bindings/power/supply/battery.yaml
+++ b/Documentation/devicetree/bindings/power/supply/battery.yaml
@@ -83,21 +83,18 @@ properties:
       for each of the battery capacity lookup table.
 
   operating-range-celsius:
-    $ref: /schemas/types.yaml#/definitions/uint32-array
     description: operating temperature range of a battery
     items:
       - description: minimum temperature at which battery can operate
       - description: maximum temperature at which battery can operate
 
   ambient-celsius:
-    $ref: /schemas/types.yaml#/definitions/uint32-array
     description: safe range of ambient temperature
     items:
       - description: alert when ambient temperature is lower than this value
       - description: alert when ambient temperature is higher than this value
 
   alert-celsius:
-    $ref: /schemas/types.yaml#/definitions/uint32-array
     description: safe range of battery temperature
     items:
       - description: alert when battery temperature is lower than this value
diff --git a/Documentation/devicetree/bindings/power/supply/bq2515x.yaml b/Documentation/devicetree/bindings/power/supply/bq2515x.yaml
index 75a56773be4a..813d6afde606 100644
--- a/Documentation/devicetree/bindings/power/supply/bq2515x.yaml
+++ b/Documentation/devicetree/bindings/power/supply/bq2515x.yaml
@@ -50,7 +50,6 @@ properties:
     maxItems: 1
 
   input-current-limit-microamp:
-    $ref: /schemas/types.yaml#/definitions/uint32
     description: Maximum input current in micro Amps.
     minimum: 50000
     maximum: 500000
diff --git a/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml b/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml
index 6f2164f7bc57..228018c87bea 100644
--- a/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml
+++ b/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml
@@ -62,7 +62,6 @@ properties:
     description: IRQ line information.
 
   dlg,irq-polling-delay-passive-ms:
-    $ref: "/schemas/types.yaml#/definitions/uint32"
     minimum: 1000
     maximum: 10000
     description: |
diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
index d3d0dc13dd8b..8850c01bd470 100644
--- a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
@@ -72,11 +72,9 @@ properties:
 
   startup-delay-us:
     description: startup time in microseconds
-    $ref: /schemas/types.yaml#/definitions/uint32
 
   off-on-delay-us:
     description: off delay time in microseconds
-    $ref: /schemas/types.yaml#/definitions/uint32
 
   enable-active-high:
     description:
diff --git a/Documentation/devicetree/bindings/rtc/rtc.yaml b/Documentation/devicetree/bindings/rtc/rtc.yaml
index d30dc045aac6..0ec3551f12dd 100644
--- a/Documentation/devicetree/bindings/rtc/rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/rtc.yaml
@@ -27,7 +27,6 @@ properties:
       1: chargeable
 
   quartz-load-femtofarads:
-    $ref: /schemas/types.yaml#/definitions/uint32
     description:
       The capacitive load of the quartz(x-tal), expressed in femto
       Farad (fF). The default value shall be listed (if optional),
@@ -47,7 +46,6 @@ properties:
     deprecated: true
 
   trickle-resistor-ohms:
-    $ref: /schemas/types.yaml#/definitions/uint32
     description:
       Selected resistor for trickle charger. Should be given
       if trickle charger should be enabled.
diff --git a/Documentation/devicetree/bindings/serial/pl011.yaml b/Documentation/devicetree/bindings/serial/pl011.yaml
index c23c93b400f0..07fa6d26f2b4 100644
--- a/Documentation/devicetree/bindings/serial/pl011.yaml
+++ b/Documentation/devicetree/bindings/serial/pl011.yaml
@@ -88,14 +88,12 @@ properties:
     description:
       Rate at which poll occurs when auto-poll is set.
       default 100ms.
-    $ref: /schemas/types.yaml#/definitions/uint32
     default: 100
 
   poll-timeout-ms:
     description:
       Poll timeout when auto-poll is set, default
       3000ms.
-    $ref: /schemas/types.yaml#/definitions/uint32
     default: 3000
 
 required:
diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.yaml b/Documentation/devicetree/bindings/sound/sgtl5000.yaml
index d116c174b545..70b4a8831073 100644
--- a/Documentation/devicetree/bindings/sound/sgtl5000.yaml
+++ b/Documentation/devicetree/bindings/sound/sgtl5000.yaml
@@ -41,14 +41,12 @@ properties:
       values of 2k, 4k or 8k. If set to 0 it will be off. If this node is not
       mentioned or if the value is unknown, then micbias resistor is set to
       4k.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
     enum: [ 0, 2, 4, 8 ]
 
   micbias-voltage-m-volts:
     description: The bias voltage to be used in mVolts. The voltage can take
       values from 1.25V to 3V by 250mV steps. If this node is not mentioned
       or the value is unknown, then the value is set to 1.25V.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
     enum: [ 1250, 1500, 1750, 2000, 2250, 2500, 2750, 3000 ]
 
   lrclk-strength:
diff --git a/Documentation/devicetree/bindings/watchdog/watchdog.yaml b/Documentation/devicetree/bindings/watchdog/watchdog.yaml
index 4e2c26cd981d..e3dfb02f0ca5 100644
--- a/Documentation/devicetree/bindings/watchdog/watchdog.yaml
+++ b/Documentation/devicetree/bindings/watchdog/watchdog.yaml
@@ -19,7 +19,6 @@ properties:
     pattern: "^watchdog(@.*|-[0-9a-f])?$"
 
   timeout-sec:
-    $ref: /schemas/types.yaml#/definitions/uint32
     description:
       Contains the watchdog timeout in seconds.