Merge tag 'docs-6.0' of git://git.lwn.net/linux

Pull documentation updates from Jonathan Corbet:
 "This was a moderately busy cycle for documentation, but nothing
  all that earth-shaking:

   - More Chinese translations, and an update to the Italian
     translations.

     The Japanese, Korean, and traditional Chinese translations
     are more-or-less unmaintained at this point, instead.

   - Some build-system performance improvements.

   - The removal of the archaic submitting-drivers.rst document,
     with the movement of what useful material that remained into
     other docs.

   - Improvements to sphinx-pre-install to, hopefully, give more
     useful suggestions.

   - A number of build-warning fixes

  Plus the usual collection of typo fixes, updates, and more"

* tag 'docs-6.0' of git://git.lwn.net/linux: (92 commits)
  docs: efi-stub: Fix paths for x86 / arm stubs
  Docs/zh_CN: Update the translation of sched-stats to 5.19-rc8
  Docs/zh_CN: Update the translation of pci to 5.19-rc8
  Docs/zh_CN: Update the translation of pci-iov-howto to 5.19-rc8
  Docs/zh_CN: Update the translation of usage to 5.19-rc8
  Docs/zh_CN: Update the translation of testing-overview to 5.19-rc8
  Docs/zh_CN: Update the translation of sparse to 5.19-rc8
  Docs/zh_CN: Update the translation of kasan to 5.19-rc8
  Docs/zh_CN: Update the translation of iio_configfs to 5.19-rc8
  doc:it_IT: align Italian documentation
  docs: Remove spurious tag from admin-guide/mm/overcommit-accounting.rst
  Documentation: process: Update email client instructions for Thunderbird
  docs: ABI: correct QEMU fw_cfg spec path
  doc/zh_CN: remove submitting-driver reference from docs
  docs: zh_TW: align to submitting-drivers removal
  docs: zh_CN: align to submitting-drivers removal
  docs: ko_KR: howto: remove reference to removed submitting-drivers
  docs: ja_JP: howto: remove reference to removed submitting-drivers
  docs: it_IT: align to submitting-drivers removal
  docs: process: remove outdated submitting-drivers.rst
  ...

9 files changed, 601 insertions, 5 deletions

diff --git a/Documentation/virt/hyperv/clocks.rst b/Documentation/virt/hyperv/clocks.rst
new file mode 100644
index 000000000000..2da2879fad52
--- /dev/null
+++ b/Documentation/virt/hyperv/clocks.rst
@@ -0,0 +1,73 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Clocks and Timers
+=================
+
+arm64
+-----
+On arm64, Hyper-V virtualizes the ARMv8 architectural system counter
+and timer. Guest VMs use this virtualized hardware as the Linux
+clocksource and clockevents via the standard arm_arch_timer.c
+driver, just as they would on bare metal. Linux vDSO support for the
+architectural system counter is functional in guest VMs on Hyper-V.
+While Hyper-V also provides a synthetic system clock and four synthetic
+per-CPU timers as described in the TLFS, they are not used by the
+Linux kernel in a Hyper-V guest on arm64.  However, older versions
+of Hyper-V for arm64 only partially virtualize the ARMv8
+architectural timer, such that the timer does not generate
+interrupts in the VM. Because of this limitation, running current
+Linux kernel versions on these older Hyper-V versions requires an
+out-of-tree patch to use the Hyper-V synthetic clocks/timers instead.
+
+x86/x64
+-------
+On x86/x64, Hyper-V provides guest VMs with a synthetic system clock
+and four synthetic per-CPU timers as described in the TLFS. Hyper-V
+also provides access to the virtualized TSC via the RDTSC and
+related instructions. These TSC instructions do not trap to
+the hypervisor and so provide excellent performance in a VM.
+Hyper-V performs TSC calibration, and provides the TSC frequency
+to the guest VM via a synthetic MSR.  Hyper-V initialization code
+in Linux reads this MSR to get the frequency, so it skips TSC
+calibration and sets tsc_reliable. Hyper-V provides virtualized
+versions of the PIT (in Hyper-V  Generation 1 VMs only), local
+APIC timer, and RTC. Hyper-V does not provide a virtualized HPET in
+guest VMs.
+
+The Hyper-V synthetic system clock can be read via a synthetic MSR,
+but this access traps to the hypervisor. As a faster alternative,
+the guest can configure a memory page to be shared between the guest
+and the hypervisor.  Hyper-V populates this memory page with a
+64-bit scale value and offset value. To read the synthetic clock
+value, the guest reads the TSC and then applies the scale and offset
+as described in the Hyper-V TLFS. The resulting value advances
+at a constant 10 MHz frequency. In the case of a live migration
+to a host with a different TSC frequency, Hyper-V adjusts the
+scale and offset values in the shared page so that the 10 MHz
+frequency is maintained.
+
+Starting with Windows Server 2022 Hyper-V, Hyper-V uses hardware
+support for TSC frequency scaling to enable live migration of VMs
+across Hyper-V hosts where the TSC frequency may be different.
+When a Linux guest detects that this Hyper-V functionality is
+available, it prefers to use Linux's standard TSC-based clocksource.
+Otherwise, it uses the clocksource for the Hyper-V synthetic system
+clock implemented via the shared page (identified as
+"hyperv_clocksource_tsc_page").
+
+The Hyper-V synthetic system clock is available to user space via
+vDSO, and gettimeofday() and related system calls can execute
+entirely in user space.  The vDSO is implemented by mapping the
+shared page with scale and offset values into user space.  User
+space code performs the same algorithm of reading the TSC and
+appying the scale and offset to get the constant 10 MHz clock.
+
+Linux clockevents are based on Hyper-V synthetic timer 0. While
+Hyper-V offers 4 synthetic timers for each CPU, Linux only uses
+timer 0. Interrupts from stimer0 are recorded on the "HVS" line in
+/proc/interrupts.  Clockevents based on the virtualized PIT and
+local APIC timer also work, but the Hyper-V synthetic timer is
+preferred.
+
+The driver for the Hyper-V synthetic system clock and timers is
+drivers/clocksource/hyperv_timer.c.
diff --git a/Documentation/virt/hyperv/index.rst b/Documentation/virt/hyperv/index.rst
new file mode 100644
index 000000000000..4a7a1b738bbe
--- /dev/null
+++ b/Documentation/virt/hyperv/index.rst
@@ -0,0 +1,12 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======================
+Hyper-V Enlightenments
+======================
+
+.. toctree::
+   :maxdepth: 1
+
+   overview
+   vmbus
+   clocks
diff --git a/Documentation/virt/hyperv/overview.rst b/Documentation/virt/hyperv/overview.rst
new file mode 100644
index 000000000000..cd493332c88a
--- /dev/null
+++ b/Documentation/virt/hyperv/overview.rst
@@ -0,0 +1,207 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Overview
+========
+The Linux kernel contains a variety of code for running as a fully
+enlightened guest on Microsoft's Hyper-V hypervisor.  Hyper-V
+consists primarily of a bare-metal hypervisor plus a virtual machine
+management service running in the parent partition (roughly
+equivalent to KVM and QEMU, for example).  Guest VMs run in child
+partitions.  In this documentation, references to Hyper-V usually
+encompass both the hypervisor and the VMM service without making a
+distinction about which functionality is provided by which
+component.
+
+Hyper-V runs on x86/x64 and arm64 architectures, and Linux guests
+are supported on both.  The functionality and behavior of Hyper-V is
+generally the same on both architectures unless noted otherwise.
+
+Linux Guest Communication with Hyper-V
+--------------------------------------
+Linux guests communicate with Hyper-V in four different ways:
+
+* Implicit traps: As defined by the x86/x64 or arm64 architecture,
+  some guest actions trap to Hyper-V.  Hyper-V emulates the action and
+  returns control to the guest.  This behavior is generally invisible
+  to the Linux kernel.
+
+* Explicit hypercalls: Linux makes an explicit function call to
+  Hyper-V, passing parameters.  Hyper-V performs the requested action
+  and returns control to the caller.  Parameters are passed in
+  processor registers or in memory shared between the Linux guest and
+  Hyper-V.   On x86/x64, hypercalls use a Hyper-V specific calling
+  sequence.  On arm64, hypercalls use the ARM standard SMCCC calling
+  sequence.
+
+* Synthetic register access: Hyper-V implements a variety of
+  synthetic registers.  On x86/x64 these registers appear as MSRs in
+  the guest, and the Linux kernel can read or write these MSRs using
+  the normal mechanisms defined by the x86/x64 architecture.  On
+  arm64, these synthetic registers must be accessed using explicit
+  hypercalls.
+
+* VMbus: VMbus is a higher-level software construct that is built on
+  the other 3 mechanisms.  It is a message passing interface between
+  the Hyper-V host and the Linux guest.  It uses memory that is shared
+  between Hyper-V and the guest, along with various signaling
+  mechanisms.
+
+The first three communication mechanisms are documented in the
+`Hyper-V Top Level Functional Spec (TLFS)`_.  The TLFS describes
+general Hyper-V functionality and provides details on the hypercalls
+and synthetic registers.  The TLFS is currently written for the
+x86/x64 architecture only.
+
+.. _Hyper-V Top Level Functional Spec (TLFS): https://docs.microsoft.com/en-us/virtualization/hyper-v-on-windows/tlfs/tlfs
+
+VMbus is not documented.  This documentation provides a high-level
+overview of VMbus and how it works, but the details can be discerned
+only from the code.
+
+Sharing Memory
+--------------
+Many aspects are communication between Hyper-V and Linux are based
+on sharing memory.  Such sharing is generally accomplished as
+follows:
+
+* Linux allocates memory from its physical address space using
+  standard Linux mechanisms.
+
+* Linux tells Hyper-V the guest physical address (GPA) of the
+  allocated memory.  Many shared areas are kept to 1 page so that a
+  single GPA is sufficient.   Larger shared areas require a list of
+  GPAs, which usually do not need to be contiguous in the guest
+  physical address space.  How Hyper-V is told about the GPA or list
+  of GPAs varies.  In some cases, a single GPA is written to a
+  synthetic register.  In other cases, a GPA or list of GPAs is sent
+  in a VMbus message.
+
+* Hyper-V translates the GPAs into "real" physical memory addresses,
+  and creates a virtual mapping that it can use to access the memory.
+
+* Linux can later revoke sharing it has previously established by
+  telling Hyper-V to set the shared GPA to zero.
+
+Hyper-V operates with a page size of 4 Kbytes. GPAs communicated to
+Hyper-V may be in the form of page numbers, and always describe a
+range of 4 Kbytes.  Since the Linux guest page size on x86/x64 is
+also 4 Kbytes, the mapping from guest page to Hyper-V page is 1-to-1.
+On arm64, Hyper-V supports guests with 4/16/64 Kbyte pages as
+defined by the arm64 architecture.   If Linux is using 16 or 64
+Kbyte pages, Linux code must be careful to communicate with Hyper-V
+only in terms of 4 Kbyte pages.  HV_HYP_PAGE_SIZE and related macros
+are used in code that communicates with Hyper-V so that it works
+correctly in all configurations.
+
+As described in the TLFS, a few memory pages shared between Hyper-V
+and the Linux guest are "overlay" pages.  With overlay pages, Linux
+uses the usual approach of allocating guest memory and telling
+Hyper-V the GPA of the allocated memory.  But Hyper-V then replaces
+that physical memory page with a page it has allocated, and the
+original physical memory page is no longer accessible in the guest
+VM.  Linux may access the memory normally as if it were the memory
+that it originally allocated.  The "overlay" behavior is visible
+only because the contents of the page (as seen by Linux) change at
+the time that Linux originally establishes the sharing and the
+overlay page is inserted.  Similarly, the contents change if Linux
+revokes the sharing, in which case Hyper-V removes the overlay page,
+and the guest page originally allocated by Linux becomes visible
+again.
+
+Before Linux does a kexec to a kdump kernel or any other kernel,
+memory shared with Hyper-V should be revoked.  Hyper-V could modify
+a shared page or remove an overlay page after the new kernel is
+using the page for a different purpose, corrupting the new kernel.
+Hyper-V does not provide a single "set everything" operation to
+guest VMs, so Linux code must individually revoke all sharing before
+doing kexec.   See hv_kexec_handler() and hv_crash_handler().  But
+the crash/panic path still has holes in cleanup because some shared
+pages are set using per-CPU synthetic registers and there's no
+mechanism to revoke the shared pages for CPUs other than the CPU
+running the panic path.
+
+CPU Management
+--------------
+Hyper-V does not have a ability to hot-add or hot-remove a CPU
+from a running VM.  However, Windows Server 2019 Hyper-V and
+earlier versions may provide guests with ACPI tables that indicate
+more CPUs than are actually present in the VM.  As is normal, Linux
+treats these additional CPUs as potential hot-add CPUs, and reports
+them as such even though Hyper-V will never actually hot-add them.
+Starting in Windows Server 2022 Hyper-V, the ACPI tables reflect
+only the CPUs actually present in the VM, so Linux does not report
+any hot-add CPUs.
+
+A Linux guest CPU may be taken offline using the normal Linux
+mechanisms, provided no VMbus channel interrupts are assigned to
+the CPU.  See the section on VMbus Interrupts for more details
+on how VMbus channel interrupts can be re-assigned to permit
+taking a CPU offline.
+
+32-bit and 64-bit
+-----------------
+On x86/x64, Hyper-V supports 32-bit and 64-bit guests, and Linux
+will build and run in either version. While the 32-bit version is
+expected to work, it is used rarely and may suffer from undetected
+regressions.
+
+On arm64, Hyper-V supports only 64-bit guests.
+
+Endian-ness
+-----------
+All communication between Hyper-V and guest VMs uses Little-Endian
+format on both x86/x64 and arm64.  Big-endian format on arm64 is not
+supported by Hyper-V, and Linux code does not use endian-ness macros
+when accessing data shared with Hyper-V.
+
+Versioning
+----------
+Current Linux kernels operate correctly with older versions of
+Hyper-V back to Windows Server 2012 Hyper-V. Support for running
+on the original Hyper-V release in Windows Server 2008/2008 R2
+has been removed.
+
+A Linux guest on Hyper-V outputs in dmesg the version of Hyper-V
+it is running on.  This version is in the form of a Windows build
+number and is for display purposes only. Linux code does not
+test this version number at runtime to determine available features
+and functionality. Hyper-V indicates feature/function availability
+via flags in synthetic MSRs that Hyper-V provides to the guest,
+and the guest code tests these flags.
+
+VMbus has its own protocol version that is negotiated during the
+initial VMbus connection from the guest to Hyper-V. This version
+number is also output to dmesg during boot.  This version number
+is checked in a few places in the code to determine if specific
+functionality is present.
+
+Furthermore, each synthetic device on VMbus also has a protocol
+version that is separate from the VMbus protocol version. Device
+drivers for these synthetic devices typically negotiate the device
+protocol version, and may test that protocol version to determine
+if specific device functionality is present.
+
+Code Packaging
+--------------
+Hyper-V related code appears in the Linux kernel code tree in three
+main areas:
+
+1. drivers/hv
+
+2. arch/x86/hyperv and arch/arm64/hyperv
+
+3. individual device driver areas such as drivers/scsi, drivers/net,
+   drivers/clocksource, etc.
+
+A few miscellaneous files appear elsewhere. See the full list under
+"Hyper-V/Azure CORE AND DRIVERS" and "DRM DRIVER FOR HYPERV
+SYNTHETIC VIDEO DEVICE" in the MAINTAINERS file.
+
+The code in #1 and #2 is built only when CONFIG_HYPERV is set.
+Similarly, the code for most Hyper-V related drivers is built only
+when CONFIG_HYPERV is set.
+
+Most Hyper-V related code in #1 and #3 can be built as a module.
+The architecture specific code in #2 must be built-in.  Also,
+drivers/hv/hv_common.c is low-level code that is common across
+architectures and must be built-in.
diff --git a/Documentation/virt/hyperv/vmbus.rst b/Documentation/virt/hyperv/vmbus.rst
new file mode 100644
index 000000000000..d2012d9022c5
--- /dev/null
+++ b/Documentation/virt/hyperv/vmbus.rst
@@ -0,0 +1,303 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+VMbus
+=====
+VMbus is a software construct provided by Hyper-V to guest VMs.  It
+consists of a control path and common facilities used by synthetic
+devices that Hyper-V presents to guest VMs.   The control path is
+used to offer synthetic devices to the guest VM and, in some cases,
+to rescind those devices.   The common facilities include software
+channels for communicating between the device driver in the guest VM
+and the synthetic device implementation that is part of Hyper-V, and
+signaling primitives to allow Hyper-V and the guest to interrupt
+each other.
+
+VMbus is modeled in Linux as a bus, with the expected /sys/bus/vmbus
+entry in a running Linux guest.  The VMbus driver (drivers/hv/vmbus_drv.c)
+establishes the VMbus control path with the Hyper-V host, then
+registers itself as a Linux bus driver.  It implements the standard
+bus functions for adding and removing devices to/from the bus.
+
+Most synthetic devices offered by Hyper-V have a corresponding Linux
+device driver.  These devices include:
+
+* SCSI controller
+* NIC
+* Graphics frame buffer
+* Keyboard
+* Mouse
+* PCI device pass-thru
+* Heartbeat
+* Time Sync
+* Shutdown
+* Memory balloon
+* Key/Value Pair (KVP) exchange with Hyper-V
+* Hyper-V online backup (a.k.a. VSS)
+
+Guest VMs may have multiple instances of the synthetic SCSI
+controller, synthetic NIC, and PCI pass-thru devices.  Other
+synthetic devices are limited to a single instance per VM.  Not
+listed above are a small number of synthetic devices offered by
+Hyper-V that are used only by Windows guests and for which Linux
+does not have a driver.
+
+Hyper-V uses the terms "VSP" and "VSC" in describing synthetic
+devices.  "VSP" refers to the Hyper-V code that implements a
+particular synthetic device, while "VSC" refers to the driver for
+the device in the guest VM.  For example, the Linux driver for the
+synthetic NIC is referred to as "netvsc" and the Linux driver for
+the synthetic SCSI controller is "storvsc".  These drivers contain
+functions with names like "storvsc_connect_to_vsp".
+
+VMbus channels
+--------------
+An instance of a synthetic device uses VMbus channels to communicate
+between the VSP and the VSC.  Channels are bi-directional and used
+for passing messages.   Most synthetic devices use a single channel,
+but the synthetic SCSI controller and synthetic NIC may use multiple
+channels to achieve higher performance and greater parallelism.
+
+Each channel consists of two ring buffers.  These are classic ring
+buffers from a university data structures textbook.  If the read
+and writes pointers are equal, the ring buffer is considered to be
+empty, so a full ring buffer always has at least one byte unused.
+The "in" ring buffer is for messages from the Hyper-V host to the
+guest, and the "out" ring buffer is for messages from the guest to
+the Hyper-V host.  In Linux, the "in" and "out" designations are as
+viewed by the guest side.  The ring buffers are memory that is
+shared between the guest and the host, and they follow the standard
+paradigm where the memory is allocated by the guest, with the list
+of GPAs that make up the ring buffer communicated to the host.  Each
+ring buffer consists of a header page (4 Kbytes) with the read and
+write indices and some control flags, followed by the memory for the
+actual ring.  The size of the ring is determined by the VSC in the
+guest and is specific to each synthetic device.   The list of GPAs
+making up the ring is communicated to the Hyper-V host over the
+VMbus control path as a GPA Descriptor List (GPADL).  See function
+vmbus_establish_gpadl().
+
+Each ring buffer is mapped into contiguous Linux kernel virtual
+space in three parts:  1) the 4 Kbyte header page, 2) the memory
+that makes up the ring itself, and 3) a second mapping of the memory
+that makes up the ring itself.  Because (2) and (3) are contiguous
+in kernel virtual space, the code that copies data to and from the
+ring buffer need not be concerned with ring buffer wrap-around.
+Once a copy operation has completed, the read or write index may
+need to be reset to point back into the first mapping, but the
+actual data copy does not need to be broken into two parts.  This
+approach also allows complex data structures to be easily accessed
+directly in the ring without handling wrap-around.
+
+On arm64 with page sizes > 4 Kbytes, the header page must still be
+passed to Hyper-V as a 4 Kbyte area.  But the memory for the actual
+ring must be aligned to PAGE_SIZE and have a size that is a multiple
+of PAGE_SIZE so that the duplicate mapping trick can be done.  Hence
+a portion of the header page is unused and not communicated to
+Hyper-V.  This case is handled by vmbus_establish_gpadl().
+
+Hyper-V enforces a limit on the aggregate amount of guest memory
+that can be shared with the host via GPADLs.  This limit ensures
+that a rogue guest can't force the consumption of excessive host
+resources.  For Windows Server 2019 and later, this limit is
+approximately 1280 Mbytes.  For versions prior to Windows Server
+2019, the limit is approximately 384 Mbytes.
+
+VMbus messages
+--------------
+All VMbus messages have a standard header that includes the message
+length, the offset of the message payload, some flags, and a
+transactionID.  The portion of the message after the header is
+unique to each VSP/VSC pair.
+
+Messages follow one of two patterns:
+
+* Unidirectional:  Either side sends a message and does not
+  expect a response message
+* Request/response:  One side (usually the guest) sends a message
+  and expects a response
+
+The transactionID (a.k.a. "requestID") is for matching requests &
+responses.  Some synthetic devices allow multiple requests to be in-
+flight simultaneously, so the guest specifies a transactionID when
+sending a request.  Hyper-V sends back the same transactionID in the
+matching response.
+
+Messages passed between the VSP and VSC are control messages.  For
+example, a message sent from the storvsc driver might be "execute
+this SCSI command".   If a message also implies some data transfer
+between the guest and the Hyper-V host, the actual data to be
+transferred may be embedded with the control message, or it may be
+specified as a separate data buffer that the Hyper-V host will
+access as a DMA operation.  The former case is used when the size of
+the data is small and the cost of copying the data to and from the
+ring buffer is minimal.  For example, time sync messages from the
+Hyper-V host to the guest contain the actual time value.  When the
+data is larger, a separate data buffer is used.  In this case, the
+control message contains a list of GPAs that describe the data
+buffer.  For example, the storvsc driver uses this approach to
+specify the data buffers to/from which disk I/O is done.
+
+Three functions exist to send VMbus messages:
+
+1. vmbus_sendpacket():  Control-only messages and messages with
+   embedded data -- no GPAs
+2. vmbus_sendpacket_pagebuffer(): Message with list of GPAs
+   identifying data to transfer.  An offset and length is
+   associated with each GPA so that multiple discontinuous areas
+   of guest memory can be targeted.
+3. vmbus_sendpacket_mpb_desc(): Message with list of GPAs
+   identifying data to transfer.  A single offset and length is
+   associated with a list of GPAs.  The GPAs must describe a
+   single logical area of guest memory to be targeted.
+
+Historically, Linux guests have trusted Hyper-V to send well-formed
+and valid messages, and Linux drivers for synthetic devices did not
+fully validate messages.  With the introduction of processor
+technologies that fully encrypt guest memory and that allow the
+guest to not trust the hypervisor (AMD SNP-SEV, Intel TDX), trusting
+the Hyper-V host is no longer a valid assumption.  The drivers for
+VMbus synthetic devices are being updated to fully validate any
+values read from memory that is shared with Hyper-V, which includes
+messages from VMbus devices.  To facilitate such validation,
+messages read by the guest from the "in" ring buffer are copied to a
+temporary buffer that is not shared with Hyper-V.  Validation is
+performed in this temporary buffer without the risk of Hyper-V
+maliciously modifying the message after it is validated but before
+it is used.
+
+VMbus interrupts
+----------------
+VMbus provides a mechanism for the guest to interrupt the host when
+the guest has queued new messages in a ring buffer.  The host
+expects that the guest will send an interrupt only when an "out"
+ring buffer transitions from empty to non-empty.  If the guest sends
+interrupts at other times, the host deems such interrupts to be
+unnecessary.  If a guest sends an excessive number of unnecessary
+interrupts, the host may throttle that guest by suspending its
+execution for a few seconds to prevent a denial-of-service attack.
+
+Similarly, the host will interrupt the guest when it sends a new
+message on the VMbus control path, or when a VMbus channel "in" ring
+buffer transitions from empty to non-empty.  Each CPU in the guest
+may receive VMbus interrupts, so they are best modeled as per-CPU
+interrupts in Linux.  This model works well on arm64 where a single
+per-CPU IRQ is allocated for VMbus.  Since x86/x64 lacks support for
+per-CPU IRQs, an x86 interrupt vector is statically allocated (see
+HYPERVISOR_CALLBACK_VECTOR) across all CPUs and explicitly coded to
+call the VMbus interrupt service routine.  These interrupts are
+visible in /proc/interrupts on the "HYP" line.
+
+The guest CPU that a VMbus channel will interrupt is selected by the
+guest when the channel is created, and the host is informed of that
+selection.  VMbus devices are broadly grouped into two categories:
+
+1. "Slow" devices that need only one VMbus channel.  The devices
+   (such as keyboard, mouse, heartbeat, and timesync) generate
+   relatively few interrupts.  Their VMbus channels are all
+   assigned to interrupt the VMBUS_CONNECT_CPU, which is always
+   CPU 0.
+
+2. "High speed" devices that may use multiple VMbus channels for
+   higher parallelism and performance.  These devices include the
+   synthetic SCSI controller and synthetic NIC.  Their VMbus
+   channels interrupts are assigned to CPUs that are spread out
+   among the available CPUs in the VM so that interrupts on
+   multiple channels can be processed in parallel.
+
+The assignment of VMbus channel interrupts to CPUs is done in the
+function init_vp_index().  This assignment is done outside of the
+normal Linux interrupt affinity mechanism, so the interrupts are
+neither "unmanaged" nor "managed" interrupts.
+
+The CPU that a VMbus channel will interrupt can be seen in
+/sys/bus/vmbus/devices/<deviceGUID>/ channels/<channelRelID>/cpu.
+When running on later versions of Hyper-V, the CPU can be changed
+by writing a new value to this sysfs entry.  Because the interrupt
+assignment is done outside of the normal Linux affinity mechanism,
+there are no entries in /proc/irq corresponding to individual
+VMbus channel interrupts.
+
+An online CPU in a Linux guest may not be taken offline if it has
+VMbus channel interrupts assigned to it.  Any such channel
+interrupts must first be manually reassigned to another CPU as
+described above.  When no channel interrupts are assigned to the
+CPU, it can be taken offline.
+
+When a guest CPU receives a VMbus interrupt from the host, the
+function vmbus_isr() handles the interrupt.  It first checks for
+channel interrupts by calling vmbus_chan_sched(), which looks at a
+bitmap setup by the host to determine which channels have pending
+interrupts on this CPU.  If multiple channels have pending
+interrupts for this CPU, they are processed sequentially.  When all
+channel interrupts have been processed, vmbus_isr() checks for and
+processes any message received on the VMbus control path.
+
+The VMbus channel interrupt handling code is designed to work
+correctly even if an interrupt is received on a CPU other than the
+CPU assigned to the channel.  Specifically, the code does not use
+CPU-based exclusion for correctness.  In normal operation, Hyper-V
+will interrupt the assigned CPU.  But when the CPU assigned to a
+channel is being changed via sysfs, the guest doesn't know exactly
+when Hyper-V will make the transition.  The code must work correctly
+even if there is a time lag before Hyper-V starts interrupting the
+new CPU.  See comments in target_cpu_store().
+
+VMbus device creation/deletion
+------------------------------
+Hyper-V and the Linux guest have a separate message-passing path
+that is used for synthetic device creation and deletion. This
+path does not use a VMbus channel.  See vmbus_post_msg() and
+vmbus_on_msg_dpc().
+
+The first step is for the guest to connect to the generic
+Hyper-V VMbus mechanism.  As part of establishing this connection,
+the guest and Hyper-V agree on a VMbus protocol version they will
+use.  This negotiation allows newer Linux kernels to run on older
+Hyper-V versions, and vice versa.
+
+The guest then tells Hyper-V to "send offers".  Hyper-V sends an
+offer message to the guest for each synthetic device that the VM
+is configured to have. Each VMbus device type has a fixed GUID
+known as the "class ID", and each VMbus device instance is also
+identified by a GUID. The offer message from Hyper-V contains
+both GUIDs to uniquely (within the VM) identify the device.
+There is one offer message for each device instance, so a VM with
+two synthetic NICs will get two offers messages with the NIC
+class ID. The ordering of offer messages can vary from boot-to-boot
+and must not be assumed to be consistent in Linux code. Offer
+messages may also arrive long after Linux has initially booted
+because Hyper-V supports adding devices, such as synthetic NICs,
+to running VMs. A new offer message is processed by
+vmbus_process_offer(), which indirectly invokes vmbus_add_channel_work().
+
+Upon receipt of an offer message, the guest identifies the device
+type based on the class ID, and invokes the correct driver to set up
+the device.  Driver/device matching is performed using the standard
+Linux mechanism.
+
+The device driver probe function opens the primary VMbus channel to
+the corresponding VSP. It allocates guest memory for the channel
+ring buffers and shares the ring buffer with the Hyper-V host by
+giving the host a list of GPAs for the ring buffer memory.  See
+vmbus_establish_gpadl().
+
+Once the ring buffer is set up, the device driver and VSP exchange
+setup messages via the primary channel.  These messages may include
+negotiating the device protocol version to be used between the Linux
+VSC and the VSP on the Hyper-V host.  The setup messages may also
+include creating additional VMbus channels, which are somewhat
+mis-named as "sub-channels" since they are functionally
+equivalent to the primary channel once they are created.
+
+Finally, the device driver may create entries in /dev as with
+any device driver.
+
+The Hyper-V host can send a "rescind" message to the guest to
+remove a device that was previously offered. Linux drivers must
+handle such a rescind message at any time. Rescinding a device
+invokes the device driver "remove" function to cleanly shut
+down the device and remove it. Once a synthetic device is
+rescinded, neither Hyper-V nor Linux retains any state about
+its previous existence. Such a device might be re-added later,
+in which case it is treated as an entirely new device. See
+vmbus_onoffer_rescind().
diff --git a/Documentation/virt/index.rst b/Documentation/virt/index.rst
index 492f0920b988..2f1cffa87b1b 100644
--- a/Documentation/virt/index.rst
+++ b/Documentation/virt/index.rst
@@ -14,6 +14,7 @@ Linux Virtualization Support
    ne_overview
    acrn/index
    coco/sev-guest
+   hyperv/index
 
 .. only:: html and subproject
 
diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst
index 98a283930307..dca926762f1f 100644
--- a/Documentation/virt/kvm/api.rst
+++ b/Documentation/virt/kvm/api.rst
@@ -4667,7 +4667,7 @@ encrypted VMs.
 
 Currently, this ioctl is used for issuing Secure Encrypted Virtualization
 (SEV) commands on AMD Processors. The SEV commands are defined in
-Documentation/virt/kvm/amd-memory-encryption.rst.
+Documentation/virt/kvm/x86/amd-memory-encryption.rst.
 
 4.111 KVM_MEMORY_ENCRYPT_REG_REGION
 -----------------------------------
@@ -7679,7 +7679,7 @@ architecture-specific interfaces.  This capability and the architecture-
 specific interfaces must be consistent, i.e. if one says the feature
 is supported, than the other should as well and vice versa.  For arm64
 see Documentation/virt/kvm/devices/vcpu.rst "KVM_ARM_VCPU_PVTIME_CTRL".
-For x86 see Documentation/virt/kvm/msr.rst "MSR_KVM_STEAL_TIME".
+For x86 see Documentation/virt/kvm/x86/msr.rst "MSR_KVM_STEAL_TIME".
 
 8.25 KVM_CAP_S390_DIAG318
 -------------------------
diff --git a/Documentation/virt/kvm/s390/s390-pv-boot.rst b/Documentation/virt/kvm/s390/s390-pv-boot.rst
index 73a6083cb5e7..96c48480a360 100644
--- a/Documentation/virt/kvm/s390/s390-pv-boot.rst
+++ b/Documentation/virt/kvm/s390/s390-pv-boot.rst
@@ -10,7 +10,7 @@ The memory of Protected Virtual Machines (PVMs) is not accessible to
 I/O or the hypervisor. In those cases where the hypervisor needs to
 access the memory of a PVM, that memory must be made accessible.
 Memory made accessible to the hypervisor will be encrypted. See
-Documentation/virt/kvm/s390-pv.rst for details."
+Documentation/virt/kvm/s390/s390-pv.rst for details."
 
 On IPL (boot) a small plaintext bootloader is started, which provides
 information about the encrypted components and necessary metadata to
diff --git a/Documentation/virt/kvm/x86/hypercalls.rst b/Documentation/virt/kvm/x86/hypercalls.rst
index e56fa8b9cfca..10db7924720f 100644
--- a/Documentation/virt/kvm/x86/hypercalls.rst
+++ b/Documentation/virt/kvm/x86/hypercalls.rst
@@ -22,7 +22,7 @@ S390:
   number in R1.
 
   For further information on the S390 diagnose call as supported by KVM,
-  refer to Documentation/virt/kvm/s390-diag.rst.
+  refer to Documentation/virt/kvm/s390/s390-diag.rst.
 
 PowerPC:
   It uses R3-R10 and hypercall number in R11. R4-R11 are used as output registers.
diff --git a/Documentation/virt/uml/user_mode_linux_howto_v2.rst b/Documentation/virt/uml/user_mode_linux_howto_v2.rst
index 863f67b72c05..af2a97429692 100644
--- a/Documentation/virt/uml/user_mode_linux_howto_v2.rst
+++ b/Documentation/virt/uml/user_mode_linux_howto_v2.rst
@@ -322,7 +322,7 @@ Shared Options
 * ``v6=[0,1]`` to specify if a v6 connection is desired for all
   transports which operate over IP. Additionally, for transports that
   have some differences in the way they operate over v4 and v6 (for example
-  EoL2TPv3), sets the correct mode of operation. In the absense of this
+  EoL2TPv3), sets the correct mode of operation. In the absence of this
   option, the socket type is determined based on what do the src and dst
   arguments resolve/parse to.