Merge branch master from git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git

Pick up the spectre documentation so the Grand Schemozzle can be added.

22 files changed, 1014 insertions, 155 deletions

diff --git a/Documentation/media/conf.py b/Documentation/media/conf.py
deleted file mode 100644
index 1f194fcd2cae..000000000000
--- a/Documentation/media/conf.py
+++ /dev/null
@@ -1,12 +0,0 @@
-# -*- coding: utf-8; mode: python -*-
-
-# SPDX-License-Identifier: GPL-2.0
-
-project = 'Linux Media Subsystem Documentation'
-
-tags.add("subproject")
-
-latex_documents = [
-    ('index', 'media.tex', 'Linux Media Subsystem Documentation',
-     'The kernel development community', 'manual'),
-]
diff --git a/Documentation/media/kapi/dtv-core.rst b/Documentation/media/kapi/dtv-core.rst
index ac005b46f23e..82c5b85ed9b1 100644
--- a/Documentation/media/kapi/dtv-core.rst
+++ b/Documentation/media/kapi/dtv-core.rst
@@ -11,12 +11,12 @@ Digital TV devices are implemented by several different drivers:
 
 - Frontend drivers that are usually implemented as two separate drivers:
 
-  - A tuner driver that implements the logic with commands the part of the
-    hardware with is responsible to tune into a digital TV transponder or
+  - A tuner driver that implements the logic which commands the part of
+    the hardware responsible for tuning into a digital TV transponder or
     physical channel. The output of a tuner is usually a baseband or
     Intermediate Frequency (IF) signal;
 
-  - A demodulator driver (a.k.a "demod") that implements the logic with
+  - A demodulator driver (a.k.a "demod") that implements the logic which
     commands the digital TV decoding hardware. The output of a demod is
     a digital stream, with multiple audio, video and data channels typically
     multiplexed using MPEG Transport Stream [#f1]_.
diff --git a/Documentation/media/kapi/v4l2-controls.rst b/Documentation/media/kapi/v4l2-controls.rst
index 64ab99abf0b6..ebe2a55908be 100644
--- a/Documentation/media/kapi/v4l2-controls.rst
+++ b/Documentation/media/kapi/v4l2-controls.rst
@@ -26,8 +26,9 @@ The control framework was created in order to implement all the rules of the
 V4L2 specification with respect to controls in a central place. And to make
 life as easy as possible for the driver developer.
 
-Note that the control framework relies on the presence of a struct v4l2_device
-for V4L2 drivers and struct v4l2_subdev for sub-device drivers.
+Note that the control framework relies on the presence of a struct
+:c:type:`v4l2_device` for V4L2 drivers and struct :c:type:`v4l2_subdev` for
+sub-device drivers.
 
 
 Objects in the framework
@@ -35,12 +36,13 @@ Objects in the framework
 
 There are two main objects:
 
-The v4l2_ctrl object describes the control properties and keeps track of the
-control's value (both the current value and the proposed new value).
+The :c:type:`v4l2_ctrl` object describes the control properties and keeps
+track of the control's value (both the current value and the proposed new
+value).
 
-v4l2_ctrl_handler is the object that keeps track of controls. It maintains a
-list of v4l2_ctrl objects that it owns and another list of references to
-controls, possibly to controls owned by other handlers.
+:c:type:`v4l2_ctrl_handler` is the object that keeps track of controls. It
+maintains a list of v4l2_ctrl objects that it owns and another list of
+references to controls, possibly to controls owned by other handlers.
 
 
 Basic usage for V4L2 and sub-device drivers
@@ -48,21 +50,39 @@ Basic usage for V4L2 and sub-device drivers
 
 1) Prepare the driver:
 
+.. code-block:: c
+
+	#include <media/v4l2-ctrls.h>
+
 1.1) Add the handler to your driver's top-level struct:
 
-.. code-block:: none
+For V4L2 drivers:
+
+.. code-block:: c
 
 	struct foo_dev {
 		...
+		struct v4l2_device v4l2_dev;
+		...
 		struct v4l2_ctrl_handler ctrl_handler;
 		...
 	};
 
-	struct foo_dev *foo;
+For sub-device drivers:
+
+.. code-block:: c
+
+	struct foo_dev {
+		...
+		struct v4l2_subdev sd;
+		...
+		struct v4l2_ctrl_handler ctrl_handler;
+		...
+	};
 
 1.2) Initialize the handler:
 
-.. code-block:: none
+.. code-block:: c
 
 	v4l2_ctrl_handler_init(&foo->ctrl_handler, nr_of_controls);
 
@@ -72,72 +92,48 @@ information. It is a hint only.
 
 1.3) Hook the control handler into the driver:
 
-1.3.1) For V4L2 drivers do this:
+For V4L2 drivers:
 
-.. code-block:: none
-
-	struct foo_dev {
-		...
-		struct v4l2_device v4l2_dev;
-		...
-		struct v4l2_ctrl_handler ctrl_handler;
-		...
-	};
+.. code-block:: c
 
 	foo->v4l2_dev.ctrl_handler = &foo->ctrl_handler;
 
-Where foo->v4l2_dev is of type struct v4l2_device.
-
-Finally, remove all control functions from your v4l2_ioctl_ops (if any):
-vidioc_queryctrl, vidioc_query_ext_ctrl, vidioc_querymenu, vidioc_g_ctrl,
-vidioc_s_ctrl, vidioc_g_ext_ctrls, vidioc_try_ext_ctrls and vidioc_s_ext_ctrls.
-Those are now no longer needed.
-
-1.3.2) For sub-device drivers do this:
-
-.. code-block:: none
+For sub-device drivers:
 
-	struct foo_dev {
-		...
-		struct v4l2_subdev sd;
-		...
-		struct v4l2_ctrl_handler ctrl_handler;
-		...
-	};
+.. code-block:: c
 
 	foo->sd.ctrl_handler = &foo->ctrl_handler;
 
-Where foo->sd is of type struct v4l2_subdev.
-
 1.4) Clean up the handler at the end:
 
-.. code-block:: none
+.. code-block:: c
 
 	v4l2_ctrl_handler_free(&foo->ctrl_handler);
 
 
 2) Add controls:
 
-You add non-menu controls by calling v4l2_ctrl_new_std:
+You add non-menu controls by calling :c:func:`v4l2_ctrl_new_std`:
 
-.. code-block:: none
+.. code-block:: c
 
 	struct v4l2_ctrl *v4l2_ctrl_new_std(struct v4l2_ctrl_handler *hdl,
 			const struct v4l2_ctrl_ops *ops,
 			u32 id, s32 min, s32 max, u32 step, s32 def);
 
-Menu and integer menu controls are added by calling v4l2_ctrl_new_std_menu:
+Menu and integer menu controls are added by calling
+:c:func:`v4l2_ctrl_new_std_menu`:
 
-.. code-block:: none
+.. code-block:: c
 
 	struct v4l2_ctrl *v4l2_ctrl_new_std_menu(struct v4l2_ctrl_handler *hdl,
 			const struct v4l2_ctrl_ops *ops,
 			u32 id, s32 max, s32 skip_mask, s32 def);
 
 Menu controls with a driver specific menu are added by calling
-v4l2_ctrl_new_std_menu_items:
+:c:func:`v4l2_ctrl_new_std_menu_items`:
 
-.. code-block:: none
+.. code-block:: c
 
        struct v4l2_ctrl *v4l2_ctrl_new_std_menu_items(
                        struct v4l2_ctrl_handler *hdl,
@@ -145,17 +141,18 @@ v4l2_ctrl_new_std_menu_items:
                        s32 skip_mask, s32 def, const char * const *qmenu);
 
 Integer menu controls with a driver specific menu can be added by calling
-v4l2_ctrl_new_int_menu:
+:c:func:`v4l2_ctrl_new_int_menu`:
 
-.. code-block:: none
+.. code-block:: c
 
 	struct v4l2_ctrl *v4l2_ctrl_new_int_menu(struct v4l2_ctrl_handler *hdl,
 			const struct v4l2_ctrl_ops *ops,
 			u32 id, s32 max, s32 def, const s64 *qmenu_int);
 
-These functions are typically called right after the v4l2_ctrl_handler_init:
+These functions are typically called right after the
+:c:func:`v4l2_ctrl_handler_init`:
 
-.. code-block:: none
+.. code-block:: c
 
 	static const s64 exp_bias_qmenu[] = {
 	       -2, -1, 0, 1, 2
@@ -192,33 +189,34 @@ These functions are typically called right after the v4l2_ctrl_handler_init:
 		return err;
 	}
 
-The v4l2_ctrl_new_std function returns the v4l2_ctrl pointer to the new
-control, but if you do not need to access the pointer outside the control ops,
-then there is no need to store it.
-
-The v4l2_ctrl_new_std function will fill in most fields based on the control
-ID except for the min, max, step and default values. These are passed in the
-last four arguments. These values are driver specific while control attributes
-like type, name, flags are all global. The control's current value will be set
-to the default value.
-
-The v4l2_ctrl_new_std_menu function is very similar but it is used for menu
-controls. There is no min argument since that is always 0 for menu controls,
-and instead of a step there is a skip_mask argument: if bit X is 1, then menu
-item X is skipped.
-
-The v4l2_ctrl_new_int_menu function creates a new standard integer menu
-control with driver-specific items in the menu. It differs from
-v4l2_ctrl_new_std_menu in that it doesn't have the mask argument and takes
-as the last argument an array of signed 64-bit integers that form an exact
-menu item list.
-
-The v4l2_ctrl_new_std_menu_items function is very similar to
-v4l2_ctrl_new_std_menu but takes an extra parameter qmenu, which is the driver
-specific menu for an otherwise standard menu control. A good example for this
-control is the test pattern control for capture/display/sensors devices that
-have the capability to generate test patterns. These test patterns are hardware
-specific, so the contents of the menu will vary from device to device.
+The :c:func:`v4l2_ctrl_new_std` function returns the v4l2_ctrl pointer to
+the new control, but if you do not need to access the pointer outside the
+control ops, then there is no need to store it.
+
+The :c:func:`v4l2_ctrl_new_std` function will fill in most fields based on
+the control ID except for the min, max, step and default values. These are
+passed in the last four arguments. These values are driver specific while
+control attributes like type, name, flags are all global. The control's
+current value will be set to the default value.
+
+The :c:func:`v4l2_ctrl_new_std_menu` function is very similar but it is
+used for menu controls. There is no min argument since that is always 0 for
+menu controls, and instead of a step there is a skip_mask argument: if bit
+X is 1, then menu item X is skipped.
+
+The :c:func:`v4l2_ctrl_new_int_menu` function creates a new standard
+integer menu control with driver-specific items in the menu. It differs
+from v4l2_ctrl_new_std_menu in that it doesn't have the mask argument and
+takes as the last argument an array of signed 64-bit integers that form an
+exact menu item list.
+
+The :c:func:`v4l2_ctrl_new_std_menu_items` function is very similar to
+v4l2_ctrl_new_std_menu but takes an extra parameter qmenu, which is the
+driver specific menu for an otherwise standard menu control. A good example
+for this control is the test pattern control for capture/display/sensors
+devices that have the capability to generate test patterns. These test
+patterns are hardware specific, so the contents of the menu will vary from
+device to device.
 
 Note that if something fails, the function will return NULL or an error and
 set ctrl_handler->error to the error code. If ctrl_handler->error was already
@@ -233,7 +231,7 @@ a bit faster that way.
 
 3) Optionally force initial control setup:
 
-.. code-block:: none
+.. code-block:: c
 
 	v4l2_ctrl_handler_setup(&foo->ctrl_handler);
 
@@ -242,9 +240,9 @@ initializes the hardware to the default control values. It is recommended
 that you do this as this ensures that both the internal data structures and
 the hardware are in sync.
 
-4) Finally: implement the v4l2_ctrl_ops
+4) Finally: implement the :c:type:`v4l2_ctrl_ops`
 
-.. code-block:: none
+.. code-block:: c
 
 	static const struct v4l2_ctrl_ops foo_ctrl_ops = {
 		.s_ctrl = foo_s_ctrl,
@@ -252,7 +250,7 @@ the hardware are in sync.
 
 Usually all you need is s_ctrl:
 
-.. code-block:: none
+.. code-block:: c
 
 	static int foo_s_ctrl(struct v4l2_ctrl *ctrl)
 	{
@@ -305,7 +303,7 @@ Accessing Control Values
 The following union is used inside the control framework to access control
 values:
 
-.. code-block:: none
+.. code-block:: c
 
 	union v4l2_ctrl_ptr {
 		s32 *p_s32;
@@ -317,7 +315,7 @@ values:
 The v4l2_ctrl struct contains these fields that can be used to access both
 current and new values:
 
-.. code-block:: none
+.. code-block:: c
 
 	s32 val;
 	struct {
@@ -330,7 +328,7 @@ current and new values:
 
 If the control has a simple s32 type type, then:
 
-.. code-block:: none
+.. code-block:: c
 
 	&ctrl->val == ctrl->p_new.p_s32
 	&ctrl->cur.val == ctrl->p_cur.p_s32
@@ -354,7 +352,7 @@ exception is for controls that return a volatile register such as a signal
 strength read-out that changes continuously. In that case you will need to
 implement g_volatile_ctrl like this:
 
-.. code-block:: none
+.. code-block:: c
 
 	static int foo_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
 	{
@@ -372,7 +370,7 @@ changes.
 
 To mark a control as volatile you have to set V4L2_CTRL_FLAG_VOLATILE:
 
-.. code-block:: none
+.. code-block:: c
 
 	ctrl = v4l2_ctrl_new_std(&sd->ctrl_handler, ...);
 	if (ctrl)
@@ -393,7 +391,7 @@ not to introduce deadlocks.
 Outside of the control ops you have to go through to helper functions to get
 or set a single control value safely in your driver:
 
-.. code-block:: none
+.. code-block:: c
 
 	s32 v4l2_ctrl_g_ctrl(struct v4l2_ctrl *ctrl);
 	int v4l2_ctrl_s_ctrl(struct v4l2_ctrl *ctrl, s32 val);
@@ -404,7 +402,7 @@ will result in a deadlock since these helpers lock the handler as well.
 
 You can also take the handler lock yourself:
 
-.. code-block:: none
+.. code-block:: c
 
 	mutex_lock(&state->ctrl_handler.lock);
 	pr_info("String value is '%s'\n", ctrl1->p_cur.p_char);
@@ -417,7 +415,7 @@ Menu Controls
 
 The v4l2_ctrl struct contains this union:
 
-.. code-block:: none
+.. code-block:: c
 
 	union {
 		u32 step;
@@ -445,7 +443,7 @@ Custom Controls
 
 Driver specific controls can be created using v4l2_ctrl_new_custom():
 
-.. code-block:: none
+.. code-block:: c
 
 	static const struct v4l2_ctrl_config ctrl_filter = {
 		.ops = &ctrl_custom_ops,
@@ -499,7 +497,7 @@ By default all controls are independent from the others. But in more
 complex scenarios you can get dependencies from one control to another.
 In that case you need to 'cluster' them:
 
-.. code-block:: none
+.. code-block:: c
 
 	struct foo {
 		struct v4l2_ctrl_handler ctrl_handler;
@@ -523,7 +521,7 @@ composite control. Similar to how a 'struct' works in C.
 So when s_ctrl is called with V4L2_CID_AUDIO_VOLUME as argument, you should set
 all two controls belonging to the audio_cluster:
 
-.. code-block:: none
+.. code-block:: c
 
 	static int foo_s_ctrl(struct v4l2_ctrl *ctrl)
 	{
@@ -545,7 +543,7 @@ all two controls belonging to the audio_cluster:
 
 In the example above the following are equivalent for the VOLUME case:
 
-.. code-block:: none
+.. code-block:: c
 
 	ctrl == ctrl->cluster[AUDIO_CL_VOLUME] == state->audio_cluster[AUDIO_CL_VOLUME]
 	ctrl->cluster[AUDIO_CL_MUTE] == state->audio_cluster[AUDIO_CL_MUTE]
@@ -553,7 +551,7 @@ In the example above the following are equivalent for the VOLUME case:
 In practice using cluster arrays like this becomes very tiresome. So instead
 the following equivalent method is used:
 
-.. code-block:: none
+.. code-block:: c
 
 	struct {
 		/* audio cluster */
@@ -565,7 +563,7 @@ The anonymous struct is used to clearly 'cluster' these two control pointers,
 but it serves no other purpose. The effect is the same as creating an
 array with two control pointers. So you can just do:
 
-.. code-block:: none
+.. code-block:: c
 
 	state->volume = v4l2_ctrl_new_std(&state->ctrl_handler, ...);
 	state->mute = v4l2_ctrl_new_std(&state->ctrl_handler, ...);
@@ -621,7 +619,7 @@ changing that control affects the control flags of the manual controls.
 In order to simplify this a special variation of v4l2_ctrl_cluster was
 introduced:
 
-.. code-block:: none
+.. code-block:: c
 
 	void v4l2_ctrl_auto_cluster(unsigned ncontrols, struct v4l2_ctrl **controls,
 				    u8 manual_val, bool set_volatile);
@@ -676,7 +674,7 @@ of another handler (e.g. for a video device node), then you should first add
 the controls to the first handler, add the other controls to the second
 handler and finally add the first handler to the second. For example:
 
-.. code-block:: none
+.. code-block:: c
 
 	v4l2_ctrl_new_std(&radio_ctrl_handler, &radio_ops, V4L2_CID_AUDIO_VOLUME, ...);
 	v4l2_ctrl_new_std(&radio_ctrl_handler, &radio_ops, V4L2_CID_AUDIO_MUTE, ...);
@@ -690,7 +688,7 @@ all controls.
 
 Or you can add specific controls to a handler:
 
-.. code-block:: none
+.. code-block:: c
 
 	volume = v4l2_ctrl_new_std(&video_ctrl_handler, &ops, V4L2_CID_AUDIO_VOLUME, ...);
 	v4l2_ctrl_new_std(&video_ctrl_handler, &ops, V4L2_CID_BRIGHTNESS, ...);
@@ -699,7 +697,7 @@ Or you can add specific controls to a handler:
 What you should not do is make two identical controls for two handlers.
 For example:
 
-.. code-block:: none
+.. code-block:: c
 
 	v4l2_ctrl_new_std(&radio_ctrl_handler, &radio_ops, V4L2_CID_AUDIO_MUTE, ...);
 	v4l2_ctrl_new_std(&video_ctrl_handler, &video_ops, V4L2_CID_AUDIO_MUTE, ...);
@@ -720,7 +718,7 @@ not own. For example, if you have to find a volume control from a subdev.
 
 You can do that by calling v4l2_ctrl_find:
 
-.. code-block:: none
+.. code-block:: c
 
 	struct v4l2_ctrl *volume;
 
@@ -729,7 +727,7 @@ You can do that by calling v4l2_ctrl_find:
 Since v4l2_ctrl_find will lock the handler you have to be careful where you
 use it. For example, this is not a good idea:
 
-.. code-block:: none
+.. code-block:: c
 
 	struct v4l2_ctrl_handler ctrl_handler;
 
@@ -738,7 +736,7 @@ use it. For example, this is not a good idea:
 
 ...and in video_ops.s_ctrl:
 
-.. code-block:: none
+.. code-block:: c
 
 	case V4L2_CID_BRIGHTNESS:
 		contrast = v4l2_find_ctrl(&ctrl_handler, V4L2_CID_CONTRAST);
@@ -760,7 +758,7 @@ not when it is used in consumer-level hardware. In that case you want to keep
 those low-level controls local to the subdev. You can do this by simply
 setting the 'is_private' flag of the control to 1:
 
-.. code-block:: none
+.. code-block:: c
 
 	static const struct v4l2_ctrl_config ctrl_private = {
 		.ops = &ctrl_custom_ops,
@@ -797,7 +795,7 @@ Sometimes the platform or bridge driver needs to be notified when a control
 from a sub-device driver changes. You can set a notify callback by calling
 this function:
 
-.. code-block:: none
+.. code-block:: c
 
 	void v4l2_ctrl_notify(struct v4l2_ctrl *ctrl,
 		void (*notify)(struct v4l2_ctrl *ctrl, void *priv), void *priv);
diff --git a/Documentation/media/uapi/cec/cec-api.rst b/Documentation/media/uapi/cec/cec-api.rst
index b614bf81aa20..0780ba07995a 100644
--- a/Documentation/media/uapi/cec/cec-api.rst
+++ b/Documentation/media/uapi/cec/cec-api.rst
@@ -39,7 +39,7 @@ Revision and Copyright
 **********************
 Authors:
 
-- Verkuil, Hans <hans.verkuil@cisco.com>
+- Verkuil, Hans <hverkuil-cisco@xs4all.nl>
 
  - Initial version.
 
diff --git a/Documentation/media/uapi/cec/cec-ioc-g-mode.rst b/Documentation/media/uapi/cec/cec-ioc-g-mode.rst
index c53bb5f73f0d..d0902f356d65 100644
--- a/Documentation/media/uapi/cec/cec-ioc-g-mode.rst
+++ b/Documentation/media/uapi/cec/cec-ioc-g-mode.rst
@@ -294,7 +294,8 @@ EINVAL
     The requested mode is invalid.
 
 EPERM
-    Monitor mode is requested without having root permissions
+    Monitor mode is requested, but the process does have the ``CAP_NET_ADMIN``
+    capability.
 
 EBUSY
     Someone else is already an exclusive follower or initiator.
diff --git a/Documentation/media/uapi/cec/cec-ioc-receive.rst b/Documentation/media/uapi/cec/cec-ioc-receive.rst
index c3a685ff05cb..4137903d672e 100644
--- a/Documentation/media/uapi/cec/cec-ioc-receive.rst
+++ b/Documentation/media/uapi/cec/cec-ioc-receive.rst
@@ -223,6 +223,18 @@ View On' messages from initiator 0xf ('Unregistered') to destination 0 ('TV').
 	result of the :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>`, and once via
 	:ref:`ioctl CEC_RECEIVE <CEC_RECEIVE>`.
 
+    * .. _`CEC-MSG-FL-RAW`:
+
+      - ``CEC_MSG_FL_RAW``
+      - 2
+      - Normally CEC messages are validated before transmitting them. If this
+        flag is set when :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>` is called,
+	then no validation takes place and the message is transmitted as-is.
+	This is useful when debugging CEC issues.
+	This flag is only allowed if the process has the ``CAP_SYS_RAWIO``
+	capability. If that is not set, then the ``EPERM`` error code is
+	returned.
+
 
 .. tabularcolumns:: |p{5.6cm}|p{0.9cm}|p{11.0cm}|
 
@@ -358,7 +370,8 @@ ENOTTY
 
 EPERM
     The CEC adapter is not configured, i.e. :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`
-    has never been called.
+    has never been called, or ``CEC_MSG_FL_RAW`` was used from a process that
+    did not have the ``CAP_SYS_RAWIO`` capability.
 
 ENONET
     The CEC adapter is not configured, i.e. :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`
diff --git a/Documentation/media/uapi/mediactl/media-ioc-enum-links.rst b/Documentation/media/uapi/mediactl/media-ioc-enum-links.rst
index a982f16e55a4..b827ebc398f8 100644
--- a/Documentation/media/uapi/mediactl/media-ioc-enum-links.rst
+++ b/Documentation/media/uapi/mediactl/media-ioc-enum-links.rst
@@ -84,6 +84,11 @@ returned during the enumeration process.
        -  Pointer to a links array allocated by the application. Ignored if
 	  NULL.
 
+    *  -  __u32
+       -  ``reserved[4]``
+       -  Reserved for future extensions. Drivers and applications must set
+          the array to zero.
+
 
 .. c:type:: media_pad_desc
 
@@ -135,7 +140,7 @@ returned during the enumeration process.
        -  Link flags, see :ref:`media-link-flag` for more details.
 
     *  -  __u32
-       -  ``reserved[4]``
+       -  ``reserved[2]``
        -  Reserved for future extensions. Drivers and applications must set
           the array to zero.
 
diff --git a/Documentation/media/uapi/rc/rc-tables.rst b/Documentation/media/uapi/rc/rc-tables.rst
index 177ac44fa0fa..20d7c686922b 100644
--- a/Documentation/media/uapi/rc/rc-tables.rst
+++ b/Documentation/media/uapi/rc/rc-tables.rst
@@ -54,7 +54,7 @@ the remote via /dev/input/event devices.
 
     -  .. row 3
 
-       -  ``KEY_0``
+       -  ``KEY_NUMERIC_0``
 
        -  Keyboard digit 0
 
@@ -62,7 +62,7 @@ the remote via /dev/input/event devices.
 
     -  .. row 4
 
-       -  ``KEY_1``
+       -  ``KEY_NUMERIC_1``
 
        -  Keyboard digit 1
 
@@ -70,7 +70,7 @@ the remote via /dev/input/event devices.
 
     -  .. row 5
 
-       -  ``KEY_2``
+       -  ``KEY_NUMERIC_2``
 
        -  Keyboard digit 2
 
@@ -78,7 +78,7 @@ the remote via /dev/input/event devices.
 
     -  .. row 6
 
-       -  ``KEY_3``
+       -  ``KEY_NUMERIC_3``
 
        -  Keyboard digit 3
 
@@ -86,7 +86,7 @@ the remote via /dev/input/event devices.
 
     -  .. row 7
 
-       -  ``KEY_4``
+       -  ``KEY_NUMERIC_4``
 
        -  Keyboard digit 4
 
@@ -94,7 +94,7 @@ the remote via /dev/input/event devices.
 
     -  .. row 8
 
-       -  ``KEY_5``
+       -  ``KEY_NUMERIC_5``
 
        -  Keyboard digit 5
 
@@ -102,7 +102,7 @@ the remote via /dev/input/event devices.
 
     -  .. row 9
 
-       -  ``KEY_6``
+       -  ``KEY_NUMERIC_6``
 
        -  Keyboard digit 6
 
@@ -110,7 +110,7 @@ the remote via /dev/input/event devices.
 
     -  .. row 10
 
-       -  ``KEY_7``
+       -  ``KEY_NUMERIC_7``
 
        -  Keyboard digit 7
 
@@ -118,7 +118,7 @@ the remote via /dev/input/event devices.
 
     -  .. row 11
 
-       -  ``KEY_8``
+       -  ``KEY_NUMERIC_8``
 
        -  Keyboard digit 8
 
@@ -126,7 +126,7 @@ the remote via /dev/input/event devices.
 
     -  .. row 12
 
-       -  ``KEY_9``
+       -  ``KEY_NUMERIC_9``
 
        -  Keyboard digit 9
 
@@ -196,7 +196,7 @@ the remote via /dev/input/event devices.
 
        -  ``KEY_PAUSE``
 
-       -  Pause sroweam
+       -  Pause stream
 
        -  PAUSE / FREEZE
 
@@ -220,7 +220,7 @@ the remote via /dev/input/event devices.
 
        -  ``KEY_STOP``
 
-       -  Stop sroweam
+       -  Stop stream
 
        -  STOP
 
@@ -228,7 +228,7 @@ the remote via /dev/input/event devices.
 
        -  ``KEY_RECORD``
 
-       -  Start/stop recording sroweam
+       -  Start/stop recording stream
 
        -  CAPTURE / REC / RECORD/PAUSE
 
@@ -577,7 +577,7 @@ the remote via /dev/input/event devices.
 
        -  ``KEY_CLEAR``
 
-       -  Stop sroweam and return to default input video/audio
+       -  Stop stream and return to default input video/audio
 
        -  CLEAR / RESET / BOSS KEY
 
@@ -593,7 +593,7 @@ the remote via /dev/input/event devices.
 
        -  ``KEY_FAVORITES``
 
-       -  Open the favorites sroweam window
+       -  Open the favorites stream window
 
        -  TV WALL / Favorites
 
diff --git a/Documentation/media/uapi/v4l/biblio.rst b/Documentation/media/uapi/v4l/biblio.rst
index ec33768c055e..8f4eb8823d82 100644
--- a/Documentation/media/uapi/v4l/biblio.rst
+++ b/Documentation/media/uapi/v4l/biblio.rst
@@ -122,6 +122,15 @@ ITU BT.1119
 
 :author:    International Telecommunication Union (http://www.itu.ch)
 
+.. _h264:
+
+ITU-T Rec. H.264 Specification (04/2017 Edition)
+================================================
+
+:title:     ITU-T Recommendation H.264 "Advanced Video Coding for Generic Audiovisual Services"
+
+:author:    International Telecommunication Union (http://www.itu.ch)
+
 .. _jfif:
 
 JFIF
diff --git a/Documentation/media/uapi/v4l/ext-ctrls-codec.rst b/Documentation/media/uapi/v4l/ext-ctrls-codec.rst
index 4a8446203085..d6ea2ffd65c5 100644
--- a/Documentation/media/uapi/v4l/ext-ctrls-codec.rst
+++ b/Documentation/media/uapi/v4l/ext-ctrls-codec.rst
@@ -759,6 +759,32 @@ enum v4l2_mpeg_video_h264_level -
 
 
 
+.. _v4l2-mpeg-video-mpeg2-level:
+
+``V4L2_CID_MPEG_VIDEO_MPEG2_LEVEL``
+    (enum)
+
+enum v4l2_mpeg_video_mpeg2_level -
+    The level information for the MPEG2 elementary stream. Applicable to
+    MPEG2 codecs. Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_MPEG2_LEVEL_LOW``
+      - Low Level (LL)
+    * - ``V4L2_MPEG_VIDEO_MPEG2_LEVEL_MAIN``
+      - Main Level (ML)
+    * - ``V4L2_MPEG_VIDEO_MPEG2_LEVEL_HIGH_1440``
+      - High-1440 Level (H-14)
+    * - ``V4L2_MPEG_VIDEO_MPEG2_LEVEL_HIGH``
+      - High Level (HL)
+
+
+
 .. _v4l2-mpeg-video-mpeg4-level:
 
 ``V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL``
@@ -845,6 +871,36 @@ enum v4l2_mpeg_video_h264_profile -
 
 
 
+.. _v4l2-mpeg-video-mpeg2-profile:
+
+``V4L2_CID_MPEG_VIDEO_MPEG2_PROFILE``
+    (enum)
+
+enum v4l2_mpeg_video_mpeg2_profile -
+    The profile information for MPEG2. Applicable to MPEG2 codecs.
+    Possible values are:
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+    * - ``V4L2_MPEG_VIDEO_MPEG2_PROFILE_SIMPLE``
+      - Simple profile (SP)
+    * - ``V4L2_MPEG_VIDEO_MPEG2_PROFILE_MAIN``
+      - Main profile (MP)
+    * - ``V4L2_MPEG_VIDEO_MPEG2_PROFILE_SNR_SCALABLE``
+      - SNR Scalable profile (SNR)
+    * - ``V4L2_MPEG_VIDEO_MPEG2_PROFILE_SPATIALLY_SCALABLE``
+      - Spatially Scalable profile (Spt)
+    * - ``V4L2_MPEG_VIDEO_MPEG2_PROFILE_HIGH``
+      - High profile (HP)
+    * - ``V4L2_MPEG_VIDEO_MPEG2_PROFILE_MULTIVIEW``
+      - Multi-view profile (MVP)
+
+
+
 .. _v4l2-mpeg-video-mpeg4-profile:
 
 ``V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE``
@@ -1395,6 +1451,575 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
       - Layer number
 
 
+.. _v4l2-mpeg-h264:
+
+``V4L2_CID_MPEG_VIDEO_H264_SPS (struct)``
+    Specifies the sequence parameter set (as extracted from the
+    bitstream) for the associated H264 slice data. This includes the
+    necessary parameters for configuring a stateless hardware decoding
+    pipeline for H264. The bitstream parameters are defined according
+    to :ref:`h264`, section 7.4.2.1.1 "Sequence Parameter Set Data
+    Semantics". For further documentation, refer to the above
+    specification, unless there is an explicit comment stating
+    otherwise.
+
+    .. note::
+
+       This compound control is not yet part of the public kernel API and
+       it is expected to change.
+
+.. c:type:: v4l2_ctrl_h264_sps
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_ctrl_h264_sps
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u8
+      - ``profile_idc``
+      -
+    * - __u8
+      - ``constraint_set_flags``
+      - See :ref:`Sequence Parameter Set Constraints Set Flags <h264_sps_constraints_set_flags>`
+    * - __u8
+      - ``level_idc``
+      -
+    * - __u8
+      - ``seq_parameter_set_id``
+      -
+    * - __u8
+      - ``chroma_format_idc``
+      -
+    * - __u8
+      - ``bit_depth_luma_minus8``
+      -
+    * - __u8
+      - ``bit_depth_chroma_minus8``
+      -
+    * - __u8
+      - ``log2_max_frame_num_minus4``
+      -
+    * - __u8
+      - ``pic_order_cnt_type``
+      -
+    * - __u8
+      - ``log2_max_pic_order_cnt_lsb_minus4``
+      -
+    * - __u8
+      - ``max_num_ref_frames``
+      -
+    * - __u8
+      - ``num_ref_frames_in_pic_order_cnt_cycle``
+      -
+    * - __s32
+      - ``offset_for_ref_frame[255]``
+      -
+    * - __s32
+      - ``offset_for_non_ref_pic``
+      -
+    * - __s32
+      - ``offset_for_top_to_bottom_field``
+      -
+    * - __u16
+      - ``pic_width_in_mbs_minus1``
+      -
+    * - __u16
+      - ``pic_height_in_map_units_minus1``
+      -
+    * - __u32
+      - ``flags``
+      - See :ref:`Sequence Parameter Set Flags <h264_sps_flags>`
+
+.. _h264_sps_constraints_set_flags:
+
+``Sequence Parameter Set Constraints Set Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_H264_SPS_CONSTRAINT_SET0_FLAG``
+      - 0x00000001
+      -
+    * - ``V4L2_H264_SPS_CONSTRAINT_SET1_FLAG``
+      - 0x00000002
+      -
+    * - ``V4L2_H264_SPS_CONSTRAINT_SET2_FLAG``
+      - 0x00000004
+      -
+    * - ``V4L2_H264_SPS_CONSTRAINT_SET3_FLAG``
+      - 0x00000008
+      -
+    * - ``V4L2_H264_SPS_CONSTRAINT_SET4_FLAG``
+      - 0x00000010
+      -
+    * - ``V4L2_H264_SPS_CONSTRAINT_SET5_FLAG``
+      - 0x00000020
+      -
+
+.. _h264_sps_flags:
+
+``Sequence Parameter Set Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_H264_SPS_FLAG_SEPARATE_COLOUR_PLANE``
+      - 0x00000001
+      -
+    * - ``V4L2_H264_SPS_FLAG_QPPRIME_Y_ZERO_TRANSFORM_BYPASS``
+      - 0x00000002
+      -
+    * - ``V4L2_H264_SPS_FLAG_DELTA_PIC_ORDER_ALWAYS_ZERO``
+      - 0x00000004
+      -
+    * - ``V4L2_H264_SPS_FLAG_GAPS_IN_FRAME_NUM_VALUE_ALLOWED``
+      - 0x00000008
+      -
+    * - ``V4L2_H264_SPS_FLAG_FRAME_MBS_ONLY``
+      - 0x00000010
+      -
+    * - ``V4L2_H264_SPS_FLAG_MB_ADAPTIVE_FRAME_FIELD``
+      - 0x00000020
+      -
+    * - ``V4L2_H264_SPS_FLAG_DIRECT_8X8_INFERENCE``
+      - 0x00000040
+      -
+
+``V4L2_CID_MPEG_VIDEO_H264_PPS (struct)``
+    Specifies the picture parameter set (as extracted from the
+    bitstream) for the associated H264 slice data. This includes the
+    necessary parameters for configuring a stateless hardware decoding
+    pipeline for H264.  The bitstream parameters are defined according
+    to :ref:`h264`, section 7.4.2.2 "Picture Parameter Set RBSP
+    Semantics". For further documentation, refer to the above
+    specification, unless there is an explicit comment stating
+    otherwise.
+
+    .. note::
+
+       This compound control is not yet part of the public kernel API and
+       it is expected to change.
+
+.. c:type:: v4l2_ctrl_h264_pps
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_ctrl_h264_pps
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u8
+      - ``pic_parameter_set_id``
+      -
+    * - __u8
+      - ``seq_parameter_set_id``
+      -
+    * - __u8
+      - ``num_slice_groups_minus1``
+      -
+    * - __u8
+      - ``num_ref_idx_l0_default_active_minus1``
+      -
+    * - __u8
+      - ``num_ref_idx_l1_default_active_minus1``
+      -
+    * - __u8
+      - ``weighted_bipred_idc``
+      -
+    * - __s8
+      - ``pic_init_qp_minus26``
+      -
+    * - __s8
+      - ``pic_init_qs_minus26``
+      -
+    * - __s8
+      - ``chroma_qp_index_offset``
+      -
+    * - __s8
+      - ``second_chroma_qp_index_offset``
+      -
+    * - __u16
+      - ``flags``
+      - See :ref:`Picture Parameter Set Flags <h264_pps_flags>`
+
+.. _h264_pps_flags:
+
+``Picture Parameter Set Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_H264_PPS_FLAG_ENTROPY_CODING_MODE``
+      - 0x00000001
+      -
+    * - ``V4L2_H264_PPS_FLAG_BOTTOM_FIELD_PIC_ORDER_IN_FRAME_PRESENT``
+      - 0x00000002
+      -
+    * - ``V4L2_H264_PPS_FLAG_WEIGHTED_PRED``
+      - 0x00000004
+      -
+    * - ``V4L2_H264_PPS_FLAG_DEBLOCKING_FILTER_CONTROL_PRESENT``
+      - 0x00000008
+      -
+    * - ``V4L2_H264_PPS_FLAG_CONSTRAINED_INTRA_PRED``
+      - 0x00000010
+      -
+    * - ``V4L2_H264_PPS_FLAG_REDUNDANT_PIC_CNT_PRESENT``
+      - 0x00000020
+      -
+    * - ``V4L2_H264_PPS_FLAG_TRANSFORM_8X8_MODE``
+      - 0x00000040
+      -
+    * - ``V4L2_H264_PPS_FLAG_PIC_SCALING_MATRIX_PRESENT``
+      - 0x00000080
+      -
+
+``V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX (struct)``
+    Specifies the scaling matrix (as extracted from the bitstream) for
+    the associated H264 slice data. The bitstream parameters are
+    defined according to :ref:`h264`, section 7.4.2.1.1.1 "Scaling
+    List Semantics". For further documentation, refer to the above
+    specification, unless there is an explicit comment stating
+    otherwise.
+
+    .. note::
+
+       This compound control is not yet part of the public kernel API and
+       it is expected to change.
+
+.. c:type:: v4l2_ctrl_h264_scaling_matrix
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_ctrl_h264_scaling_matrix
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u8
+      - ``scaling_list_4x4[6][16]``
+      -
+    * - __u8
+      - ``scaling_list_8x8[6][64]``
+      -
+
+``V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAMS (struct)``
+    Specifies the slice parameters (as extracted from the bitstream)
+    for the associated H264 slice data. This includes the necessary
+    parameters for configuring a stateless hardware decoding pipeline
+    for H264.  The bitstream parameters are defined according to
+    :ref:`h264`, section 7.4.3 "Slice Header Semantics". For further
+    documentation, refer to the above specification, unless there is
+    an explicit comment stating otherwise.
+
+    .. note::
+
+       This compound control is not yet part of the public kernel API
+       and it is expected to change.
+
+       This structure is expected to be passed as an array, with one
+       entry for each slice included in the bitstream buffer.
+
+.. c:type:: v4l2_ctrl_h264_slice_params
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_ctrl_h264_slice_params
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``size``
+      -
+    * - __u32
+      - ``header_bit_size``
+      -
+    * - __u16
+      - ``first_mb_in_slice``
+      -
+    * - __u8
+      - ``slice_type``
+      -
+    * - __u8
+      - ``pic_parameter_set_id``
+      -
+    * - __u8
+      - ``colour_plane_id``
+      -
+    * - __u8
+      - ``redundant_pic_cnt``
+      -
+    * - __u16
+      - ``frame_num``
+      -
+    * - __u16
+      - ``idr_pic_id``
+      -
+    * - __u16
+      - ``pic_order_cnt_lsb``
+      -
+    * - __s32
+      - ``delta_pic_order_cnt_bottom``
+      -
+    * - __s32
+      - ``delta_pic_order_cnt0``
+      -
+    * - __s32
+      - ``delta_pic_order_cnt1``
+      -
+    * - struct :c:type:`v4l2_h264_pred_weight_table`
+      - ``pred_weight_table``
+      -
+    * - __u32
+      - ``dec_ref_pic_marking_bit_size``
+      -
+    * - __u32
+      - ``pic_order_cnt_bit_size``
+      -
+    * - __u8
+      - ``cabac_init_idc``
+      -
+    * - __s8
+      - ``slice_qp_delta``
+      -
+    * - __s8
+      - ``slice_qs_delta``
+      -
+    * - __u8
+      - ``disable_deblocking_filter_idc``
+      -
+    * - __s8
+      - ``slice_alpha_c0_offset_div2``
+      -
+    * - __s8
+      - ``slice_beta_offset_div2``
+      -
+    * - __u8
+      - ``num_ref_idx_l0_active_minus1``
+      -
+    * - __u8
+      - ``num_ref_idx_l1_active_minus1``
+      -
+    * - __u32
+      - ``slice_group_change_cycle``
+      -
+    * - __u8
+      - ``ref_pic_list0[32]``
+      - Reference picture list after applying the per-slice modifications
+    * - __u8
+      - ``ref_pic_list1[32]``
+      - Reference picture list after applying the per-slice modifications
+    * - __u32
+      - ``flags``
+      - See :ref:`Slice Parameter Flags <h264_slice_flags>`
+
+.. _h264_slice_flags:
+
+``Slice Parameter Set Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_H264_SLICE_FLAG_FIELD_PIC``
+      - 0x00000001
+      -
+    * - ``V4L2_H264_SLICE_FLAG_BOTTOM_FIELD``
+      - 0x00000002
+      -
+    * - ``V4L2_H264_SLICE_FLAG_DIRECT_SPATIAL_MV_PRED``
+      - 0x00000004
+      -
+    * - ``V4L2_H264_SLICE_FLAG_SP_FOR_SWITCH``
+      - 0x00000008
+      -
+
+``Prediction Weight Table``
+
+    The bitstream parameters are defined according to :ref:`h264`,
+    section 7.4.3.2 "Prediction Weight Table Semantics". For further
+    documentation, refer to the above specification, unless there is
+    an explicit comment stating otherwise.
+
+.. c:type:: v4l2_h264_pred_weight_table
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_h264_pred_weight_table
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u16
+      - ``luma_log2_weight_denom``
+      -
+    * - __u16
+      - ``chroma_log2_weight_denom``
+      -
+    * - struct :c:type:`v4l2_h264_weight_factors`
+      - ``weight_factors[2]``
+      - The weight factors at index 0 are the weight factors for the reference
+        list 0, the one at index 1 for the reference list 1.
+
+.. c:type:: v4l2_h264_weight_factors
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_h264_weight_factors
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __s16
+      - ``luma_weight[32]``
+      -
+    * - __s16
+      - ``luma_offset[32]``
+      -
+    * - __s16
+      - ``chroma_weight[32][2]``
+      -
+    * - __s16
+      - ``chroma_offset[32][2]``
+      -
+
+``V4L2_CID_MPEG_VIDEO_H264_DECODE_PARAMS (struct)``
+    Specifies the decode parameters (as extracted from the bitstream)
+    for the associated H264 slice data. This includes the necessary
+    parameters for configuring a stateless hardware decoding pipeline
+    for H264. The bitstream parameters are defined according to
+    :ref:`h264`. For further documentation, refer to the above
+    specification, unless there is an explicit comment stating
+    otherwise.
+
+    .. note::
+
+       This compound control is not yet part of the public kernel API and
+       it is expected to change.
+
+.. c:type:: v4l2_ctrl_h264_decode_params
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_ctrl_h264_decode_params
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - struct :c:type:`v4l2_h264_dpb_entry`
+      - ``dpb[16]``
+      -
+    * - __u16
+      - ``num_slices``
+      - Number of slices needed to decode the current frame
+    * - __u16
+      - ``nal_ref_idc``
+      - NAL reference ID value coming from the NAL Unit header
+    * - __u8
+      - ``ref_pic_list_p0[32]``
+      - Backward reference list used by P-frames in the original bitstream order
+    * - __u8
+      - ``ref_pic_list_b0[32]``
+      - Backward reference list used by B-frames in the original bitstream order
+    * - __u8
+      - ``ref_pic_list_b1[32]``
+      - Forward reference list used by B-frames in the original bitstream order
+    * - __s32
+      - ``top_field_order_cnt``
+      - Picture Order Count for the coded top field
+    * - __s32
+      - ``bottom_field_order_cnt``
+      - Picture Order Count for the coded bottom field
+    * - __u32
+      - ``flags``
+      - See :ref:`Decode Parameters Flags <h264_decode_params_flags>`
+
+.. _h264_decode_params_flags:
+
+``Decode Parameters Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_H264_DECODE_PARAM_FLAG_IDR_PIC``
+      - 0x00000001
+      - That picture is an IDR picture
+
+.. c:type:: v4l2_h264_dpb_entry
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_h264_dpb_entry
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u64
+      - ``reference_ts``
+      - Timestamp of the V4L2 capture buffer to use as reference, used
+        with B-coded and P-coded frames. The timestamp refers to the
+	``timestamp`` field in struct :c:type:`v4l2_buffer`. Use the
+	:c:func:`v4l2_timeval_to_ns()` function to convert the struct
+	:c:type:`timeval` in struct :c:type:`v4l2_buffer` to a __u64.
+    * - __u16
+      - ``frame_num``
+      -
+    * - __u16
+      - ``pic_num``
+      -
+    * - __s32
+      - ``top_field_order_cnt``
+      -
+    * - __s32
+      - ``bottom_field_order_cnt``
+      -
+    * - __u32
+      - ``flags``
+      - See :ref:`DPB Entry Flags <h264_dpb_flags>`
+
+.. _h264_dpb_flags:
+
+``DPB Entries Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_H264_DPB_ENTRY_FLAG_VALID``
+      - 0x00000001
+      - The DPB entry is valid and should be considered
+    * - ``V4L2_H264_DPB_ENTRY_FLAG_ACTIVE``
+      - 0x00000002
+      - The DPB entry is currently being used as a reference frame
+    * - ``V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM``
+      - 0x00000004
+      - The DPB entry is a long term reference frame
 
 .. _v4l2-mpeg-mpeg2:
 
diff --git a/Documentation/media/uapi/v4l/extended-controls.rst b/Documentation/media/uapi/v4l/extended-controls.rst
index 24274b398e63..655362483730 100644
--- a/Documentation/media/uapi/v4l/extended-controls.rst
+++ b/Documentation/media/uapi/v4l/extended-controls.rst
@@ -85,20 +85,17 @@ be able to see such compound controls. In other words, these controls
 with compound types should only be used programmatically.
 
 Since such compound controls need to expose more information about
-themselves than is possible with
-:ref:`VIDIOC_QUERYCTRL` the
-:ref:`VIDIOC_QUERY_EXT_CTRL <VIDIOC_QUERYCTRL>` ioctl was added. In
-particular, this ioctl gives the dimensions of the N-dimensional array
-if this control consists of more than one element.
+themselves than is possible with :ref:`VIDIOC_QUERYCTRL <VIDIOC_QUERYCTRL>`
+the :ref:`VIDIOC_QUERY_EXT_CTRL <VIDIOC_QUERYCTRL>` ioctl was added. In
+particular, this ioctl gives the dimensions of the N-dimensional array if
+this control consists of more than one element.
 
 .. note::
 
    #. It is important to realize that due to the flexibility of controls it is
       necessary to check whether the control you want to set actually is
       supported in the driver and what the valid range of values is. So use
-      the :ref:`VIDIOC_QUERYCTRL` (or :ref:`VIDIOC_QUERY_EXT_CTRL
-      <VIDIOC_QUERYCTRL>`) and :ref:`VIDIOC_QUERYMENU <VIDIOC_QUERYCTRL>`
-      ioctls to check this.
+      :ref:`VIDIOC_QUERYCTRL` to check this.
 
    #. It is possible that some of the menu indices in a control of
       type ``V4L2_CTRL_TYPE_MENU`` may not be supported (``VIDIOC_QUERYMENU``
@@ -144,7 +141,7 @@ control class is found:
     while (0 == ioctl(fd, VIDIOC_QUERYCTRL, &qctrl)) {
 	if (V4L2_CTRL_ID2CLASS(qctrl.id) != V4L2_CTRL_CLASS_MPEG)
 	    break;
-	    /* ... */
+	/* ... */
 	qctrl.id |= V4L2_CTRL_FLAG_NEXT_CTRL;
     }
 
diff --git a/Documentation/media/uapi/v4l/field-order.rst b/Documentation/media/uapi/v4l/field-order.rst
index d640e922a974..c422bebe4314 100644
--- a/Documentation/media/uapi/v4l/field-order.rst
+++ b/Documentation/media/uapi/v4l/field-order.rst
@@ -51,6 +51,11 @@ determined by the video standard. Hence the distinction between temporal
 and spatial order of fields. The diagrams below should make this
 clearer.
 
+In V4L it is assumed that all video cameras transmit fields on the media
+bus in the same order they were captured, so if the top field was
+captured first (is the older field), the top field is also transmitted
+first on the bus.
+
 All video capture and output devices must report the current field
 order. Some drivers may permit the selection of a different order, to
 this end applications initialize the ``field`` field of struct
@@ -101,10 +106,10 @@ enum v4l2_field
     * - ``V4L2_FIELD_INTERLACED``
       - 4
       - Images contain both fields, interleaved line by line. The temporal
-	order of the fields (whether the top or bottom field is first
-	transmitted) depends on the current video standard. M/NTSC
-	transmits the bottom field first, all other standards the top
-	field first.
+	order of the fields (whether the top or bottom field is older)
+	depends on the current video standard. In M/NTSC the bottom
+	field is the older field. In all other standards the top field
+	is the older field.
     * - ``V4L2_FIELD_SEQ_TB``
       - 5
       - Images contain both fields, the top field lines are stored first
@@ -135,11 +140,11 @@ enum v4l2_field
     * - ``V4L2_FIELD_INTERLACED_TB``
       - 8
       - Images contain both fields, interleaved line by line, top field
-	first. The top field is transmitted first.
+	first. The top field is the older field.
     * - ``V4L2_FIELD_INTERLACED_BT``
       - 9
       - Images contain both fields, interleaved line by line, top field
-	first. The bottom field is transmitted first.
+	first. The bottom field is the older field.
 
 
 
diff --git a/Documentation/media/uapi/v4l/pixfmt-compressed.rst b/Documentation/media/uapi/v4l/pixfmt-compressed.rst
index 6c961cfb74da..4b701fc7653e 100644
--- a/Documentation/media/uapi/v4l/pixfmt-compressed.rst
+++ b/Documentation/media/uapi/v4l/pixfmt-compressed.rst
@@ -52,6 +52,31 @@ Compressed Formats
       - ``V4L2_PIX_FMT_H264_MVC``
       - 'M264'
       - H264 MVC video elementary stream.
+    * .. _V4L2-PIX-FMT-H264-SLICE-RAW:
+
+      - ``V4L2_PIX_FMT_H264_SLICE_RAW``
+      - 'S264'
+      - H264 parsed slice data, without the start code and as
+	extracted from the H264 bitstream.  This format is adapted for
+	stateless video decoders that implement an H264 pipeline
+	(using the :ref:`mem2mem` and :ref:`media-request-api`).
+	Metadata associated with the frame to decode are required to
+	be passed through the ``V4L2_CID_MPEG_VIDEO_H264_SPS``,
+	``V4L2_CID_MPEG_VIDEO_H264_PPS``,
+	``V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX``,
+	``V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAMS`` and
+	``V4L2_CID_MPEG_VIDEO_H264_DECODE_PARAMS`` controls.  See the
+	:ref:`associated Codec Control IDs <v4l2-mpeg-h264>`.  Exactly
+	one output and one capture buffer must be provided for use
+	with this pixel format. The output buffer must contain the
+	appropriate number of macroblocks to decode a full
+	corresponding frame to the matching capture buffer.
+
+	.. note::
+
+	   This format is not yet part of the public kernel API and it
+	   is expected to change.
+
     * .. _V4L2-PIX-FMT-H263:
 
       - ``V4L2_PIX_FMT_H263``
diff --git a/Documentation/media/uapi/v4l/pixfmt-v4l2-mplane.rst b/Documentation/media/uapi/v4l/pixfmt-v4l2-mplane.rst
index 5688c816e334..db43dda5aafb 100644
--- a/Documentation/media/uapi/v4l/pixfmt-v4l2-mplane.rst
+++ b/Documentation/media/uapi/v4l/pixfmt-v4l2-mplane.rst
@@ -31,7 +31,20 @@ describing all planes of that format.
 
     * - __u32
       - ``sizeimage``
-      - Maximum size in bytes required for image data in this plane.
+      - Maximum size in bytes required for image data in this plane,
+	set by the driver. When the image consists of variable length
+	compressed data this is the number of bytes required by the
+	codec to support the worst-case compression scenario.
+
+	The driver will set the value for uncompressed images.
+
+	Clients are allowed to set the sizeimage field for variable length
+	compressed data flagged with ``V4L2_FMT_FLAG_COMPRESSED`` at
+	:ref:`VIDIOC_ENUM_FMT`, but the driver may ignore it and set the
+	value itself, or it may modify the provided value based on
+	alignment requirements or minimum/maximum size requirements.
+	If the client wants to leave this to the driver, then it should
+	set sizeimage to 0.
     * - __u32
       - ``bytesperline``
       - Distance in bytes between the leftmost pixels in two adjacent
diff --git a/Documentation/media/uapi/v4l/pixfmt-v4l2.rst b/Documentation/media/uapi/v4l/pixfmt-v4l2.rst
index 71eebfc6d853..da6da2ef139a 100644
--- a/Documentation/media/uapi/v4l/pixfmt-v4l2.rst
+++ b/Documentation/media/uapi/v4l/pixfmt-v4l2.rst
@@ -89,7 +89,18 @@ Single-planar format structure
       - Size in bytes of the buffer to hold a complete image, set by the
 	driver. Usually this is ``bytesperline`` times ``height``. When
 	the image consists of variable length compressed data this is the
-	maximum number of bytes required to hold an image.
+	number of bytes required by the codec to support the worst-case
+	compression scenario.
+
+	The driver will set the value for uncompressed images.
+
+	Clients are allowed to set the sizeimage field for variable length
+	compressed data flagged with ``V4L2_FMT_FLAG_COMPRESSED`` at
+	:ref:`VIDIOC_ENUM_FMT`, but the driver may ignore it and set the
+	value itself, or it may modify the provided value based on
+	alignment requirements or minimum/maximum size requirements.
+	If the client wants to leave this to the driver, then it should
+	set sizeimage to 0.
     * - __u32
       - ``colorspace``
       - Image colorspace, from enum :c:type:`v4l2_colorspace`.
diff --git a/Documentation/media/uapi/v4l/vidioc-qbuf.rst b/Documentation/media/uapi/v4l/vidioc-qbuf.rst
index dbf7b445a27b..407302d80684 100644
--- a/Documentation/media/uapi/v4l/vidioc-qbuf.rst
+++ b/Documentation/media/uapi/v4l/vidioc-qbuf.rst
@@ -139,6 +139,14 @@ may continue as normal, but should be aware that data in the dequeued
 buffer might be corrupted. When using the multi-planar API, the planes
 array must be passed in as well.
 
+If the application sets the ``memory`` field to ``V4L2_MEMORY_DMABUF`` to
+dequeue a :ref:`DMABUF <dmabuf>` buffer, the driver fills the ``m.fd`` field
+with a file descriptor numerically the same as the one given to ``VIDIOC_QBUF``
+when the buffer was enqueued. No new file descriptor is created at dequeue time
+and the value is only for the application convenience. When the multi-planar
+API is used the ``m.fd`` fields of the passed array of struct
+:c:type:`v4l2_plane` are filled instead.
+
 By default ``VIDIOC_DQBUF`` blocks when no buffer is in the outgoing
 queue. When the ``O_NONBLOCK`` flag was given to the
 :ref:`open() <func-open>` function, ``VIDIOC_DQBUF`` returns
diff --git a/Documentation/media/uapi/v4l/vidioc-queryctrl.rst b/Documentation/media/uapi/v4l/vidioc-queryctrl.rst
index f824162d0ea9..dc500632095d 100644
--- a/Documentation/media/uapi/v4l/vidioc-queryctrl.rst
+++ b/Documentation/media/uapi/v4l/vidioc-queryctrl.rst
@@ -443,6 +443,36 @@ See also the examples in :ref:`control`.
       - n/a
       - A struct :c:type:`v4l2_ctrl_mpeg2_quantization`, containing MPEG-2
 	quantization matrices for stateless video decoders.
+    * - ``V4L2_CTRL_TYPE_H264_SPS``
+      - n/a
+      - n/a
+      - n/a
+      - A struct :c:type:`v4l2_ctrl_h264_sps`, containing H264
+	sequence parameters for stateless video decoders.
+    * - ``V4L2_CTRL_TYPE_H264_PPS``
+      - n/a
+      - n/a
+      - n/a
+      - A struct :c:type:`v4l2_ctrl_h264_pps`, containing H264
+	picture parameters for stateless video decoders.
+    * - ``V4L2_CTRL_TYPE_H264_SCALING_MATRIX``
+      - n/a
+      - n/a
+      - n/a
+      - A struct :c:type:`v4l2_ctrl_h264_scaling_matrix`, containing H264
+	scaling matrices for stateless video decoders.
+    * - ``V4L2_CTRL_TYPE_H264_SLICE_PARAMS``
+      - n/a
+      - n/a
+      - n/a
+      - A struct :c:type:`v4l2_ctrl_h264_slice_params`, containing H264
+	slice parameters for stateless video decoders.
+    * - ``V4L2_CTRL_TYPE_H264_DECODE_PARAMS``
+      - n/a
+      - n/a
+      - n/a
+      - A struct :c:type:`v4l2_ctrl_h264_decode_params`, containing H264
+	decode parameters for stateless video decoders.
 
 .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
 
diff --git a/Documentation/media/v4l-drivers/index.rst b/Documentation/media/v4l-drivers/index.rst
index 33a055907258..c4c78a28654c 100644
--- a/Documentation/media/v4l-drivers/index.rst
+++ b/Documentation/media/v4l-drivers/index.rst
@@ -64,5 +64,6 @@ For more details see the file COPYING in the source distribution of Linux.
 	si476x
 	soc-camera
 	uvcvideo
+	vimc
 	vivid
 	zr364xx
diff --git a/Documentation/media/v4l-drivers/vimc.dot b/Documentation/media/v4l-drivers/vimc.dot
new file mode 100644
index 000000000000..57863a13fa39
--- /dev/null
+++ b/Documentation/media/v4l-drivers/vimc.dot
@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: GPL-2.0
+
+digraph board {
+	rankdir=TB
+	n00000001 [label="{{} | Sensor A\n/dev/v4l-subdev0 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000001:port0 -> n00000005:port0 [style=bold]
+	n00000001:port0 -> n0000000b [style=bold]
+	n00000003 [label="{{} | Sensor B\n/dev/v4l-subdev1 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000003:port0 -> n00000008:port0 [style=bold]
+	n00000003:port0 -> n0000000f [style=bold]
+	n00000005 [label="{{<port0> 0} | Debayer A\n/dev/v4l-subdev2 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000005:port1 -> n00000017:port0
+	n00000008 [label="{{<port0> 0} | Debayer B\n/dev/v4l-subdev3 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000008:port1 -> n00000017:port0 [style=dashed]
+	n0000000b [label="Raw Capture 0\n/dev/video0", shape=box, style=filled, fillcolor=yellow]
+	n0000000f [label="Raw Capture 1\n/dev/video1", shape=box, style=filled, fillcolor=yellow]
+	n00000013 [label="RGB/YUV Input\n/dev/video2", shape=box, style=filled, fillcolor=yellow]
+	n00000013 -> n00000017:port0 [style=dashed]
+	n00000017 [label="{{<port0> 0} | Scaler\n/dev/v4l-subdev4 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000017:port1 -> n0000001a [style=bold]
+	n0000001a [label="RGB/YUV Capture\n/dev/video3", shape=box, style=filled, fillcolor=yellow]
+}
diff --git a/Documentation/media/v4l-drivers/vimc.rst b/Documentation/media/v4l-drivers/vimc.rst
new file mode 100644
index 000000000000..4628b12d417f
--- /dev/null
+++ b/Documentation/media/v4l-drivers/vimc.rst
@@ -0,0 +1,98 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+The Virtual Media Controller Driver (vimc)
+==========================================
+
+The vimc driver emulates complex video hardware using the V4L2 API and the Media
+API. It has a capture device and three subdevices: sensor, debayer and scaler.
+
+Topology
+--------
+
+The topology is hardcoded, although you could modify it in vimc-core and
+recompile the driver to achieve your own topology. This is the default topology:
+
+.. _vimc_topology_graph:
+
+.. kernel-figure:: vimc.dot
+    :alt:   vimc.dot
+    :align: center
+
+    Media pipeline graph on vimc
+
+Configuring the topology
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+Each subdevice will come with its default configuration (pixelformat, height,
+width, ...). One needs to configure the topology in order to match the
+configuration on each linked subdevice to stream frames through the pipeline.
+If the configuration doesn't match, the stream will fail. The ``v4l-utils``
+package is a bundle of user-space applications, that comes with ``media-ctl`` and
+``v4l2-ctl`` that can be used to configure the vimc configuration. This sequence
+of commands fits for the default topology:
+
+.. code-block:: bash
+
+        media-ctl -d platform:vimc -V '"Sensor A":0[fmt:SBGGR8_1X8/640x480]'
+        media-ctl -d platform:vimc -V '"Debayer A":0[fmt:SBGGR8_1X8/640x480]'
+        media-ctl -d platform:vimc -V '"Sensor B":0[fmt:SBGGR8_1X8/640x480]'
+        media-ctl -d platform:vimc -V '"Debayer B":0[fmt:SBGGR8_1X8/640x480]'
+        v4l2-ctl -z platform:vimc -d "RGB/YUV Capture" -v width=1920,height=1440
+        v4l2-ctl -z platform:vimc -d "Raw Capture 0" -v pixelformat=BA81
+        v4l2-ctl -z platform:vimc -d "Raw Capture 1" -v pixelformat=BA81
+
+Subdevices
+----------
+
+Subdevices define the behavior of an entity in the topology. Depending on the
+subdevice, the entity can have multiple pads of type source or sink.
+
+vimc-sensor:
+	Generates images in several formats using video test pattern generator.
+	Exposes:
+
+	* 1 Pad source
+
+vimc-debayer:
+	Transforms images in bayer format into a non-bayer format.
+	Exposes:
+
+	* 1 Pad sink
+	* 1 Pad source
+
+vimc-scaler:
+	Scale up the image by a factor of 3. E.g.: a 640x480 image becomes a
+        1920x1440 image. (this value can be configured, see at
+        `Module options`_).
+	Exposes:
+
+	* 1 Pad sink
+	* 1 Pad source
+
+vimc-capture:
+	Exposes node /dev/videoX to allow userspace to capture the stream.
+	Exposes:
+
+	* 1 Pad sink
+	* 1 Pad source
+
+Module options
+---------------
+
+Vimc has a few module parameters to configure the driver. You should pass
+those arguments to each subdevice, not to the vimc module. For example::
+
+        vimc_subdevice.param=value
+
+* ``vimc_scaler.sca_mult=<unsigned int>``
+
+        Image size multiplier factor to be used to multiply both width and
+        height, so the image size will be ``sca_mult^2`` bigger than the
+        original one. Currently, only supports scaling up (the default value
+        is 3).
+
+* ``vimc_debayer.deb_mean_win_size=<unsigned int>``
+
+        Window size to calculate the mean. Note: the window size needs to be an
+        odd number, as the main pixel stays in the center of the window,
+        otherwise the next odd number is considered (the default value is 3).
diff --git a/Documentation/media/v4l-drivers/vivid.rst b/Documentation/media/v4l-drivers/vivid.rst
index edb6f33e029c..7082fec4075d 100644
--- a/Documentation/media/v4l-drivers/vivid.rst
+++ b/Documentation/media/v4l-drivers/vivid.rst
@@ -941,6 +941,11 @@ Digital Video Controls
 	affects the reported colorspace since DVI_D outputs will always use
 	sRGB.
 
+- Display Present:
+
+	sets the presence of a "display" on the HDMI output. This affects
+	the tx_edid_present, tx_hotplug and tx_rxsense controls.
+
 
 FM Radio Receiver Controls
 ~~~~~~~~~~~~~~~~~~~~~~~~~~
diff --git a/Documentation/media/videodev2.h.rst.exceptions b/Documentation/media/videodev2.h.rst.exceptions
index 64d348e67df9..55cbe324b9fc 100644
--- a/Documentation/media/videodev2.h.rst.exceptions
+++ b/Documentation/media/videodev2.h.rst.exceptions
@@ -136,6 +136,11 @@ replace symbol V4L2_CTRL_TYPE_U32 :c:type:`v4l2_ctrl_type`
 replace symbol V4L2_CTRL_TYPE_U8 :c:type:`v4l2_ctrl_type`
 replace symbol V4L2_CTRL_TYPE_MPEG2_SLICE_PARAMS :c:type:`v4l2_ctrl_type`
 replace symbol V4L2_CTRL_TYPE_MPEG2_QUANTIZATION :c:type:`v4l2_ctrl_type`
+replace symbol V4L2_CTRL_TYPE_H264_SPS :c:type:`v4l2_ctrl_type`
+replace symbol V4L2_CTRL_TYPE_H264_PPS :c:type:`v4l2_ctrl_type`
+replace symbol V4L2_CTRL_TYPE_H264_SCALING_MATRIX :c:type:`v4l2_ctrl_type`
+replace symbol V4L2_CTRL_TYPE_H264_SLICE_PARAMS :c:type:`v4l2_ctrl_type`
+replace symbol V4L2_CTRL_TYPE_H264_DECODE_PARAMS :c:type:`v4l2_ctrl_type`
 
 # V4L2 capability defines
 replace define V4L2_CAP_VIDEO_CAPTURE device-capabilities