Merge tag 'sound-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "It was another busy development cycle, and the majority of changes are
  found in ASoC side. Below are Some highlights.

  ASoC core:
   - Lots of core cleanups and refactorings, still on-going work by
     Morimoto-san

  ASoC drivers:
   - Continued work on cleaning up and improving the Intel SOF stuff,
     along with new platform support including SoundWire

   - Fixes to make the Marvell SSPA driver work upstream

   - Support for AMD Renoir ACP, Dialog DA7212, Freescale EASRC and
     i.MX8M, Intel Elkhard Lake, Maxim MAX98390, Nuvoton NAU8812 and
     NAU8814 and Realtek RT1016.

  USB-audio:
   - Improvement for sync and implicit feedback streams with the more
     accurate frame size calculation and full-duplex support

   - Support for RME Babyface Pro and Prioneer DJ DJM

  HD-audio:
   - Fixes for Mic mute LED on HP machines

   - Re-enable support of Intel SST driver for SKL/KBL platforms

  FireWire:
   - Lots of refactoring, add support for RME FireFace and MOTU
     UltraLite-mk3"

* tag 'sound-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (428 commits)
  ALSA: es1688: Add the missed snd_card_free()
  ALSA: hda: add sienna_cichlid audio asic id for sienna_cichlid up
  ALSA: usb-audio: Add Pioneer DJ DJM-900NXS2 support
  ASoC: qcom: q6asm-dai: kCFI fix
  ASoC: soc-card: add snd_soc_card_remove_dai_link()
  ASoC: soc-card: add snd_soc_card_add_dai_link()
  ASoC: soc-card: add snd_soc_card_set_bias_level_post()
  ASoC: soc-card: add snd_soc_card_set_bias_level()
  ASoC: soc-card: add snd_soc_card_remove()
  ASoC: soc-card: add snd_soc_card_late_probe()
  ASoC: soc-card: add snd_soc_card_probe()
  ASoC: soc-card: add probed bit field to snd_soc_card
  ASoC: soc-card: add snd_soc_card_resume_post()
  ASoC: soc-card: add snd_soc_card_resume_pre()
  ASoC: soc-card: add snd_soc_card_suspend_post()
  ASoC: soc-card: add snd_soc_card_suspend_pre()
  ASoC: soc-card: move snd_soc_card_subclass to soc-card
  ASoC: soc-card: move snd_soc_card_get_codec_dai() to soc-card
  ASoC: soc-card: move snd_soc_card_set/get_drvdata() to soc-card
  ASoC: soc-card: move snd_soc_card_jack_new() to soc-card
  ...

23 files changed, 937 insertions, 394 deletions

diff --git a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
index a5dc070d0ca7..3bbe9521c0bc 100644
--- a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
+++ b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
@@ -17,6 +17,8 @@ properties:
   compatible:
     enum:
       - fsl,imx8qxp-dsp
+      - fsl,imx8qm-dsp
+      - fsl,imx8mp-dsp
 
   reg:
     description: Should contain register location and length
diff --git a/Documentation/devicetree/bindings/sound/da7213.txt b/Documentation/devicetree/bindings/sound/da7213.txt
index 58902802d56c..94584c96c4ae 100644
--- a/Documentation/devicetree/bindings/sound/da7213.txt
+++ b/Documentation/devicetree/bindings/sound/da7213.txt
@@ -1,9 +1,9 @@
-Dialog Semiconductor DA7213 Audio Codec bindings
+Dialog Semiconductor DA7212/DA7213 Audio Codec bindings
 
 ======
 
 Required properties:
-- compatible : Should be "dlg,da7213"
+- compatible : Should be "dlg,da7212" or "dlg,da7213"
 - reg: Specifies the I2C slave address
 
 Optional properties:
@@ -21,6 +21,10 @@ Optional properties:
 - dlg,dmic-clkrate : DMIC clock frequency (Hz).
 	[<1500000>, <3000000>]
 
+ - VDDA-supply : Regulator phandle for Analogue power supply
+ - VDDMIC-supply : Regulator phandle for Mic Bias
+ - VDDIO-supply : Regulator phandle for I/O power supply
+
 ======
 
 Example:
diff --git a/Documentation/devicetree/bindings/sound/fsl,asrc.txt b/Documentation/devicetree/bindings/sound/fsl,asrc.txt
index cb9a25165503..998b4c8a7f78 100644
--- a/Documentation/devicetree/bindings/sound/fsl,asrc.txt
+++ b/Documentation/devicetree/bindings/sound/fsl,asrc.txt
@@ -51,6 +51,10 @@ Optional properties:
 			  will be in use as default. Otherwise, the big endian
 			  mode will be in use for all the device registers.
 
+   - fsl,asrc-format	: Defines a mutual sample format used by DPCM Back
+			  Ends, which can replace the fsl,asrc-width.
+			  The value is 2 (S16_LE), or 6 (S24_LE).
+
 Example:
 
 asrc: asrc@2034000 {
diff --git a/Documentation/devicetree/bindings/sound/fsl,easrc.yaml b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml
new file mode 100644
index 000000000000..73cdcf053a9c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,easrc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Asynchronous Sample Rate Converter (ASRC) Controller
+
+maintainers:
+  - Shengjiu Wang <shengjiu.wang@nxp.com>
+
+properties:
+  $nodename:
+    pattern: "^easrc@.*"
+
+  compatible:
+    const: fsl,imx8mn-easrc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Peripheral clock
+
+  clock-names:
+    items:
+      - const: mem
+
+  dmas:
+    maxItems: 8
+
+  dma-names:
+    items:
+      - const: ctx0_rx
+      - const: ctx0_tx
+      - const: ctx1_rx
+      - const: ctx1_tx
+      - const: ctx2_rx
+      - const: ctx2_tx
+      - const: ctx3_rx
+      - const: ctx3_tx
+
+  firmware-name:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/string
+      - const: imx/easrc/easrc-imx8mn.bin
+    description: The coefficient table for the filters
+
+  fsl,asrc-rate:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - minimum: 8000
+      - maximum: 192000
+    description: Defines a mutual sample rate used by DPCM Back Ends
+
+  fsl,asrc-format:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [2, 6, 10, 32, 36]
+        default: 2
+    description:
+      Defines a mutual sample format used by DPCM Back Ends
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+  - firmware-name
+  - fsl,asrc-rate
+  - fsl,asrc-format
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mn-clock.h>
+
+    easrc: easrc@300c0000 {
+           compatible = "fsl,imx8mn-easrc";
+           reg = <0x0 0x300c0000 0x0 0x10000>;
+           interrupts = <0x0 122 0x4>;
+           clocks = <&clk IMX8MN_CLK_ASRC_ROOT>;
+           clock-names = "mem";
+           dmas = <&sdma2 16 23 0> , <&sdma2 17 23 0>,
+                  <&sdma2 18 23 0> , <&sdma2 19 23 0>,
+                  <&sdma2 20 23 0> , <&sdma2 21 23 0>,
+                  <&sdma2 22 23 0> , <&sdma2 23 23 0>;
+           dma-names = "ctx0_rx", "ctx0_tx",
+                       "ctx1_rx", "ctx1_tx",
+                       "ctx2_rx", "ctx2_tx",
+                       "ctx3_rx", "ctx3_tx";
+           firmware-name = "imx/easrc/easrc-imx8mn.bin";
+           fsl,asrc-rate  = <8000>;
+           fsl,asrc-format = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/fsl,esai.txt b/Documentation/devicetree/bindings/sound/fsl,esai.txt
index 0e6e2166f76c..0a2480aeecf0 100644
--- a/Documentation/devicetree/bindings/sound/fsl,esai.txt
+++ b/Documentation/devicetree/bindings/sound/fsl,esai.txt
@@ -12,6 +12,7 @@ Required properties:
 			  "fsl,imx35-esai",
 			  "fsl,vf610-esai",
 			  "fsl,imx6ull-esai",
+			  "fsl,imx8qm-esai",
 
   - reg			: Offset and length of the register set for the device.
 
diff --git a/Documentation/devicetree/bindings/sound/marvell,mmp-sspa.yaml b/Documentation/devicetree/bindings/sound/marvell,mmp-sspa.yaml
new file mode 100644
index 000000000000..6d20a24a2ae9
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/marvell,mmp-sspa.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/marvell,mmp-sspa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvel SSPA Digital Audio Interface Bindings
+
+maintainers:
+  - Lubomir Rintel <lkundrak@v3.sk>
+
+properties:
+  $nodename:
+    pattern: "^audio-controller(@.*)?$"
+
+  compatible:
+    const: marvell,mmp-sspa
+
+  reg:
+    items:
+      - description: RX block
+      - description: TX block
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Clock for the Audio block
+      - description: I2S bit clock
+
+  clock-names:
+    items:
+      - const: audio
+      - const: bitclk
+
+  power-domains:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 0
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  port:
+    type: object
+
+    properties:
+      endpoint:
+        type: object
+
+        properties:
+          remote-endpoint: true
+
+          frame-master:
+            type: boolean
+            description: SoC generates the frame clock
+
+          bitclock-master:
+            type: boolean
+            description: SoC generates the bit clock
+
+          dai-format:
+            $ref: /schemas/types.yaml#/definitions/string
+            description: The digital audio format
+            const: i2s
+
+        required:
+          - remote-endpoint
+
+    required:
+      - endpoint
+
+    additionalProperties: false
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/marvell,mmp2.h>
+
+    audio-controller@d42a0c00 {
+      compatible = "marvell,mmp-sspa";
+      reg = <0xd42a0c00 0x30>,
+            <0xd42a0c80 0x30>;
+      interrupts = <2>;
+      clock-names = "audio", "bitclk";
+      clocks = <&soc_clocks 127>,
+               <&audio_clk 1>;
+      #sound-dai-cells = <0>;
+      dmas = <&adma0 0>, <&adma0 1>;
+      dma-names = "tx", "rx";
+      port {
+        endpoint {
+          remote-endpoint = <&rt5631_0>;
+          frame-master;
+          bitclock-master;
+          dai-format = "i2s";
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nau8810.txt b/Documentation/devicetree/bindings/sound/nau8810.txt
index 05830e477acd..7deaa452b200 100644
--- a/Documentation/devicetree/bindings/sound/nau8810.txt
+++ b/Documentation/devicetree/bindings/sound/nau8810.txt
@@ -1,10 +1,11 @@
-NAU8810 audio CODEC
+NAU8810/NAU8812/NAU8814 audio CODEC
 
 This device supports I2C only.
 
 Required properties:
 
-  - compatible : "nuvoton,nau8810"
+  - compatible : One of "nuvoton,nau8810" or "nuvoton,nau8812" or
+	"nuvoton,nau8814"
 
   - reg : the I2C address of the device.
 
diff --git a/Documentation/devicetree/bindings/sound/nau8825.txt b/Documentation/devicetree/bindings/sound/nau8825.txt
index d16d96839bcb..388a7bc60b1f 100644
--- a/Documentation/devicetree/bindings/sound/nau8825.txt
+++ b/Documentation/devicetree/bindings/sound/nau8825.txt
@@ -101,5 +101,5 @@ Example:
       nuvoton,crosstalk-enable;
 
       clock-names = "mclk";
-      clocks = <&tegra_car TEGRA210_CLK_CLK_OUT_2>;
+      clocks = <&tegra_pmc TEGRA_PMC_CLK_OUT_2>;
   };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt
index a8f2b0c56c79..bbd581a8c5bc 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt
@@ -29,6 +29,7 @@ Optional properties:
 - nvidia,hp-det-gpios : The GPIO that detect headphones are plugged in
 - nvidia,int-mic-en-gpios : The GPIO that enables the internal microphone
 - nvidia,ext-mic-en-gpios : The GPIO that enables the external microphone
+- nvidia,headset : The Mic Jack represents state of the headset microphone pin
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
index 21c648328be9..32c2cdb3d32f 100644
--- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
@@ -30,6 +30,8 @@ Required properties:
 - reg			: Must contain an address for each entry in reg-names.
 - reg-names		: A list which must include the following entries:
 				* "lpass-lpaif"
+- #address-cells	: Must be 1
+- #size-cells		: Must be 0
 
 
 
@@ -37,6 +39,20 @@ Optional properties:
 
 - qcom,adsp		: Phandle for the audio DSP node
 
+By default, the driver uses up to 4 MI2S SD lines, for a total of 8 channels.
+The SD lines to use can be configured by adding subnodes for each of the DAIs.
+
+Required properties for each DAI (represented by a subnode):
+- reg			: Must be one of the DAI IDs
+			  (usually part of dt-bindings header)
+- qcom,playback-sd-lines: List of serial data lines to use for playback
+			  Each SD line should be represented by a number from 0-3.
+- qcom,capture-sd-lines	: List of serial data lines to use for capture
+			  Each SD line should be represented by a number from 0-3.
+
+Note that adding a subnode changes the default to "no lines configured",
+so both playback and capture lines should be configured when a subnode is added.
+
 Example:
 
 lpass@28100000 {
@@ -51,4 +67,13 @@ lpass@28100000 {
 	reg = <0x28100000 0x10000>;
 	reg-names = "lpass-lpaif";
 	qcom,adsp = <&adsp>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* Optional to set different MI2S SD lines */
+	dai@3 {
+		reg = <MI2S_QUATERNARY>;
+		qcom,playback-sd-lines = <0 1>;
+	};
 };
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6adm.txt b/Documentation/devicetree/bindings/sound/qcom,q6adm.txt
index bbae426cdfb1..15c353a20de8 100644
--- a/Documentation/devicetree/bindings/sound/qcom,q6adm.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,q6adm.txt
@@ -29,7 +29,7 @@ used by the apr service device.
 	Definition: Must be 0
 
 = EXAMPLE
-q6adm@8 {
+apr-service@8 {
 	compatible = "qcom,q6adm";
 	reg = <APR_SVC_ADM>;
 	q6routing: routing {
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
index d74888b9f1bb..4916dd6a0896 100644
--- a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
@@ -100,7 +100,7 @@ configuration of each dai. Must contain the following properties.
 
 = EXAMPLE
 
-q6afe@4 {
+apr-service@4 {
 	compatible = "qcom,q6afe";
 	reg = <APR_SVC_AFE>;
 
@@ -110,12 +110,12 @@ q6afe@4 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		hdmi@1 {
-			reg = <1>;
+		dai@1 {
+			reg = <HDMI_RX>;
 		};
 
-		tdm@24 {
-			reg = <24>;
+		dai@24 {
+			reg = <PRIMARY_TDM_RX_0>;
 			qcom,tdm-sync-mode = <1>:
 			qcom,tdm-sync-src = <1>;
 			qcom,tdm-data-out = <0>;
@@ -125,8 +125,8 @@ q6afe@4 {
 
 		};
 
-		tdm@25 {
-			reg = <25>;
+		dai@25 {
+			reg = <PRIMARY_TDM_TX_0>;
 			qcom,tdm-sync-mode = <1>:
 			qcom,tdm-sync-src = <1>;
 			qcom,tdm-data-out = <0>;
@@ -135,43 +135,43 @@ q6afe@4 {
 			qcom,tdm-data-align = <0>;
 		};
 
-		prim-mi2s-rx@16 {
-			reg = <16>;
+		dai@16 {
+			reg = <PRIMARY_MI2S_RX>;
 			qcom,sd-lines = <0 2>;
 		};
 
-		prim-mi2s-tx@17 {
-			reg = <17>;
+		dai@17 {
+			reg = <PRIMARY_MI2S_TX>;
 			qcom,sd-lines = <1>;
 		};
 
-		sec-mi2s-rx@18 {
-			reg = <18>;
+		dai@18 {
+			reg = <SECONDARY_MI2S_RX>;
 			qcom,sd-lines = <0 3>;
 		};
 
-		sec-mi2s-tx@19 {
-			reg = <19>;
+		dai@19 {
+			reg = <SECONDARY_MI2S_TX>;
 			qcom,sd-lines = <1>;
 		};
 
-		tert-mi2s-rx@20 {
-			reg = <20>;
+		dai@20 {
+			reg = <TERTIARY_MI2S_RX>;
 			qcom,sd-lines = <1 3>;
 		};
 
-		tert-mi2s-tx@21 {
-			reg = <21>;
+		dai@21 {
+			reg = <TERTIARY_MI2S_TX>;
 			qcom,sd-lines = <0>;
 		};
 
-		quat-mi2s-rx@22 {
-			reg = <22>;
+		dai@22 {
+			reg = <QUATERNARY_MI2S_RX>;
 			qcom,sd-lines = <0>;
 		};
 
-		quat-mi2s-tx@23 {
-			reg = <23>;
+		dai@23 {
+			reg = <QUATERNARY_MI2S_TX>;
 			qcom,sd-lines = <1>;
 		};
 	};
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6asm.txt b/Documentation/devicetree/bindings/sound/qcom,q6asm.txt
index 9f5378c51686..6b9a88d0ea3f 100644
--- a/Documentation/devicetree/bindings/sound/qcom,q6asm.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,q6asm.txt
@@ -51,13 +51,16 @@ configuration of each dai. Must contain the following properties.
 
 = EXAMPLE
 
-q6asm@7 {
+apr-service@7 {
 	compatible = "qcom,q6asm";
 	reg = <APR_SVC_ASM>;
 	q6asmdai: dais {
 		compatible = "qcom,q6asm-dais";
+		#address-cells = <1>;
+		#size-cells = <0>;
 		#sound-dai-cells = <1>;
-		mm@0 {
+
+		dai@0 {
 			reg = <0>;
 			direction = <2>;
 			is-compress-dai;
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6core.txt b/Documentation/devicetree/bindings/sound/qcom,q6core.txt
index 7f36ff8bec18..5cd4cc9b1fde 100644
--- a/Documentation/devicetree/bindings/sound/qcom,q6core.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,q6core.txt
@@ -15,7 +15,7 @@ used by the apr service device.
 		   example "qcom,q6core-v2.0"
 
 = EXAMPLE
-q6core@3 {
+apr-service@3 {
 	compatible = "qcom,q6core";
 	reg = <APR_SVC_ADSP_CORE>;
 };
diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
index 797fd035434c..1596f0d1e2fe 100644
--- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
+++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
@@ -263,6 +263,7 @@ Required properties:
 				  "renesas,rcar_sound-gen2" if generation2 (or RZ/G1)
 				  "renesas,rcar_sound-gen3" if generation3 (or RZ/G2)
 				  Examples with soctypes are:
+				    - "renesas,rcar_sound-r8a7742" (RZ/G1H)
 				    - "renesas,rcar_sound-r8a7743" (RZ/G1M)
 				    - "renesas,rcar_sound-r8a7744" (RZ/G1N)
 				    - "renesas,rcar_sound-r8a7745" (RZ/G1E)
diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml b/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml
index a3ba2186d6a1..10f9d3ad0d48 100644
--- a/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml
+++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml
@@ -24,6 +24,7 @@ properties:
             - rockchip,rk3188-i2s
             - rockchip,rk3228-i2s
             - rockchip,rk3288-i2s
+            - rockchip,rk3308-i2s
             - rockchip,rk3328-i2s
             - rockchip,rk3366-i2s
             - rockchip,rk3368-i2s
@@ -47,14 +48,15 @@ properties:
       - const: i2s_hclk
 
   dmas:
-    items:
-      - description: TX DMA Channel
-      - description: RX DMA Channel
+    minItems: 1
+    maxItems: 2
 
   dma-names:
-    items:
-      - const: tx
+    oneOf:
       - const: rx
+      - items:
+        - const: tx
+        - const: rx
 
   power-domains:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/sound/rt1016.txt b/Documentation/devicetree/bindings/sound/rt1016.txt
new file mode 100644
index 000000000000..2310f8ff259b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rt1016.txt
@@ -0,0 +1,17 @@
+RT1016 Stereo Class D Audio Amplifier
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : "realtek,rt1016".
+
+- reg : The I2C address of the device.
+
+
+Example:
+
+rt1016: codec@1a {
+	compatible = "realtek,rt1016";
+	reg = <0x1a>;
+};
diff --git a/Documentation/devicetree/bindings/sound/rt1308.txt b/Documentation/devicetree/bindings/sound/rt1308.txt
index 2d46084afce4..2d46084afce4 100755..100644
--- a/Documentation/devicetree/bindings/sound/rt1308.txt
+++ b/Documentation/devicetree/bindings/sound/rt1308.txt
diff --git a/Documentation/devicetree/bindings/sound/simple-card.txt b/Documentation/devicetree/bindings/sound/simple-card.txt
deleted file mode 100644
index 79954cd6e37b..000000000000
--- a/Documentation/devicetree/bindings/sound/simple-card.txt
+++ /dev/null
@@ -1,351 +0,0 @@
-Simple-Card:
-
-Simple-Card specifies audio DAI connections of SoC <-> codec.
-
-Required properties:
-
-- compatible				: "simple-audio-card"
-
-Optional properties:
-
-- simple-audio-card,name		: User specified audio sound card name, one string
-					  property.
-- simple-audio-card,widgets		: Please refer to widgets.txt.
-- simple-audio-card,routing		: A list of the connections between audio components.
-					  Each entry is a pair of strings, the first being the
-					  connection's sink, the second being the connection's
-					  source.
-- simple-audio-card,mclk-fs             : Multiplication factor between stream rate and codec
-					  mclk. When defined, mclk-fs property defined in
-					  dai-link sub nodes are ignored.
-- simple-audio-card,hp-det-gpio		: Reference to GPIO that signals when
-					  headphones are attached.
-- simple-audio-card,mic-det-gpio	: Reference to GPIO that signals when
-					  a microphone is attached.
-- simple-audio-card,aux-devs		: List of phandles pointing to auxiliary devices, such
-					  as amplifiers, to be added to the sound card.
-- simple-audio-card,pin-switches	: List of strings containing the widget names for
-					  which pin switches must be created.
-
-Optional subnodes:
-
-- simple-audio-card,dai-link		: Container for dai-link level
-					  properties and the CPU and CODEC
-					  sub-nodes. This container may be
-					  omitted when the card has only one
-					  DAI link. See the examples and the
-					  section below.
-
-Dai-link subnode properties and subnodes:
-
-If dai-link subnode is omitted and the subnode properties are directly
-under "sound"-node the subnode property and subnode names have to be
-prefixed with "simple-audio-card,"-prefix.
-
-Required dai-link subnodes:
-
-- cpu					: CPU   sub-node
-- codec					: CODEC sub-node
-
-Optional dai-link subnode properties:
-
-- format				: CPU/CODEC common audio format.
-					  "i2s", "right_j", "left_j" , "dsp_a"
-					  "dsp_b", "ac97", "pdm", "msb", "lsb"
-- frame-master				: Indicates dai-link frame master.
-					  phandle to a cpu or codec subnode.
-- bitclock-master			: Indicates dai-link bit clock master.
-					  phandle to a cpu or codec subnode.
-- bitclock-inversion			: bool property. Add this if the
-					  dai-link uses bit clock inversion.
-- frame-inversion			: bool property. Add this if the
-					  dai-link uses frame clock inversion.
-- mclk-fs             			: Multiplication factor between stream
-					  rate and codec mclk, applied only for
-					  the dai-link.
-
-For backward compatibility the frame-master and bitclock-master
-properties can be used as booleans in codec subnode to indicate if the
-codec is the dai-link frame or bit clock master. In this case there
-should be no dai-link node, the same properties should not be present
-at sound-node level, and the bitclock-inversion and frame-inversion
-properties should also be placed in the codec node if needed.
-
-Required CPU/CODEC subnodes properties:
-
-- sound-dai				: phandle and port of CPU/CODEC
-
-Optional CPU/CODEC subnodes properties:
-
-- dai-tdm-slot-num			: Please refer to tdm-slot.txt.
-- dai-tdm-slot-width			: Please refer to tdm-slot.txt.
-- clocks / system-clock-frequency	: specify subnode's clock if needed.
-					  it can be specified via "clocks" if system has
-					  clock node (= common clock), or "system-clock-frequency"
-					  (if system doens't support common clock)
-					  If a clock is specified, it is
-					  enabled with clk_prepare_enable()
-					  in dai startup() and disabled with
-					  clk_disable_unprepare() in dai
-					  shutdown().
-					  If a clock is specified and a
-					  multiplication factor is given with
-					  mclk-fs, the clock will be set to the
-					  calculated mclk frequency when the
-					  stream starts.
-- system-clock-direction-out		: specifies clock direction as 'out' on
-					  initialization. It is useful for some aCPUs with
-					  fixed clocks.
-
--------------------------------------------
-Example 1 - single DAI link:
--------------------------------------------
-
-sound {
-	compatible = "simple-audio-card";
-	simple-audio-card,name = "VF610-Tower-Sound-Card";
-	simple-audio-card,format = "left_j";
-	simple-audio-card,bitclock-master = <&dailink0_master>;
-	simple-audio-card,frame-master = <&dailink0_master>;
-	simple-audio-card,widgets =
-		"Microphone", "Microphone Jack",
-		"Headphone", "Headphone Jack",
-		"Speaker", "External Speaker";
-	simple-audio-card,routing =
-		"MIC_IN", "Microphone Jack",
-		"Headphone Jack", "HP_OUT",
-		"External Speaker", "LINE_OUT";
-
-	simple-audio-card,cpu {
-		sound-dai = <&sh_fsi2 0>;
-	};
-
-	dailink0_master: simple-audio-card,codec {
-		sound-dai = <&ak4648>;
-		clocks = <&osc>;
-	};
-};
-
-&i2c0 {
-	ak4648: ak4648@12 {
-		#sound-dai-cells = <0>;
-		compatible = "asahi-kasei,ak4648";
-		reg = <0x12>;
-	};
-};
-
-sh_fsi2: sh_fsi2@ec230000 {
-	#sound-dai-cells = <1>;
-	compatible = "renesas,sh_fsi2";
-	reg = <0xec230000 0x400>;
-	interrupt-parent = <&gic>;
-	interrupts = <0 146 0x4>;
-};
-
--------------------------------------------
-Example 2 - many DAI links:
--------------------------------------------
-
-sound {
-	compatible = "simple-audio-card";
-	simple-audio-card,name = "Cubox Audio";
-
-	simple-audio-card,dai-link@0 {		/* I2S - HDMI */
-		reg = <0>;
-		format = "i2s";
-		cpu {
-			sound-dai = <&audio1 0>;
-		};
-		codec {
-			sound-dai = <&tda998x 0>;
-		};
-	};
-
-	simple-audio-card,dai-link@1 {		/* S/PDIF - HDMI */
-		reg = <1>;
-		cpu {
-			sound-dai = <&audio1 1>;
-		};
-		codec {
-			sound-dai = <&tda998x 1>;
-		};
-	};
-
-	simple-audio-card,dai-link@2 {		/* S/PDIF - S/PDIF */
-		reg = <2>;
-		cpu {
-			sound-dai = <&audio1 1>;
-		};
-		codec {
-			sound-dai = <&spdif_codec>;
-		};
-	};
-};
-
--------------------------------------------
-Example 3 - route audio from IMX6 SSI2 through TLV320DAC3100 codec
-through TPA6130A2 amplifier to headphones:
--------------------------------------------
-
-&i2c0 {
-	codec: tlv320dac3100@18 {
-		compatible = "ti,tlv320dac3100";
-		...
-	}
-
-	amp: tpa6130a2@60 {
-		compatible = "ti,tpa6130a2";
-		...
-	}
-}
-
-sound {
-	compatible = "simple-audio-card";
-	...
-	simple-audio-card,widgets =
-		"Headphone", "Headphone Jack";
-	simple-audio-card,routing =
-		"Headphone Jack", "HPLEFT",
-		"Headphone Jack", "HPRIGHT",
-		"LEFTIN", "HPL",
-		"RIGHTIN", "HPR";
-	simple-audio-card,aux-devs = <&amp>;
-	simple-audio-card,cpu {
-		sound-dai = <&ssi2>;
-	};
-	simple-audio-card,codec {
-		sound-dai = <&codec>;
-		clocks = ...
-	};
-};
-
--------------------------------------------
-Example 4. Sampling Rate Conversion
--------------------------------------------
-
-sound {
-	compatible = "simple-audio-card";
-
-	simple-audio-card,name = "rsnd-ak4643";
-	simple-audio-card,format = "left_j";
-	simple-audio-card,bitclock-master = <&sndcodec>;
-	simple-audio-card,frame-master = <&sndcodec>;
-
-	simple-audio-card,convert-rate = <48000>;
-
-	simple-audio-card,prefix = "ak4642";
-	simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback",
-			"DAI0 Capture", "ak4642 Capture";
-
-	sndcpu: simple-audio-card,cpu {
-		sound-dai = <&rcar_sound>;
-	};
-
-	sndcodec: simple-audio-card,codec {
-		sound-dai = <&ak4643>;
-		system-clock-frequency = <11289600>;
-	};
-};
-
--------------------------------------------
-Example 5. 2 CPU 1 Codec (Mixing)
--------------------------------------------
-sound {
-	compatible = "simple-audio-card";
-
-	simple-audio-card,name = "rsnd-ak4643";
-	simple-audio-card,format = "left_j";
-	simple-audio-card,bitclock-master = <&dpcmcpu>;
-	simple-audio-card,frame-master = <&dpcmcpu>;
-
-	simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback",
-			"ak4642 Playback", "DAI1 Playback";
-
-	dpcmcpu: cpu@0 {
-		sound-dai = <&rcar_sound 0>;
-	};
-
-	cpu@1 {
-		sound-dai = <&rcar_sound 1>;
-	};
-
-	codec {
-		prefix = "ak4642";
-		sound-dai = <&ak4643>;
-		clocks = <&audio_clock>;
-	};
-};
-
--------------------------------------------
-Example 6 - many DAI links with DPCM:
--------------------------------------------
-
-CPU0 ------ ak4613
-CPU1 ------ PCM3168A-p  /* DPCM 1ch/2ch */
-CPU2 --/                /* DPCM 3ch/4ch */
-CPU3 --/                /* DPCM 5ch/6ch */
-CPU4 --/                /* DPCM 7ch/8ch */
-CPU5 ------ PCM3168A-c
-
-sound {
-	compatible = "simple-audio-card";
-
-	simple-audio-card,routing =
-		  "pcm3168a Playback", "DAI1 Playback",
-		  "pcm3168a Playback", "DAI2 Playback",
-		  "pcm3168a Playback", "DAI3 Playback",
-		  "pcm3168a Playback", "DAI4 Playback";
-
-	simple-audio-card,dai-link@0 {
-		format = "left_j";
-		bitclock-master = <&sndcpu0>;
-		frame-master = <&sndcpu0>;
-
-		sndcpu0: cpu {
-			sound-dai = <&rcar_sound 0>;
-		};
-		codec {
-			sound-dai = <&ak4613>;
-		};
-	};
-	simple-audio-card,dai-link@1 {
-		format = "i2s";
-		bitclock-master = <&sndcpu1>;
-		frame-master = <&sndcpu1>;
-
-		convert-channels = <8>; /* TDM Split */
-
-		sndcpu1: cpu@0 {
-			sound-dai = <&rcar_sound 1>;
-		};
-		cpu@1 {
-			sound-dai = <&rcar_sound 2>;
-		};
-		cpu@2 {
-			sound-dai = <&rcar_sound 3>;
-		};
-		cpu@3 {
-			sound-dai = <&rcar_sound 4>;
-		};
-		codec {
-			mclk-fs = <512>;
-			prefix = "pcm3168a";
-			dai-tdm-slot-num = <8>;
-			sound-dai = <&pcm3168a 0>;
-		};
-	};
-	simple-audio-card,dai-link@2 {
-		format = "i2s";
-		bitclock-master = <&sndcpu2>;
-		frame-master = <&sndcpu2>;
-
-		sndcpu2: cpu {
-			sound-dai = <&rcar_sound 5>;
-		};
-		codec {
-			mclk-fs = <512>;
-			prefix = "pcm3168a";
-			sound-dai = <&pcm3168a 1>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/sound/simple-card.yaml b/Documentation/devicetree/bindings/sound/simple-card.yaml
new file mode 100644
index 000000000000..cb2bb5fac0e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/simple-card.yaml
@@ -0,0 +1,484 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/simple-card.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple Audio Card Driver Device Tree Bindings
+
+maintainers:
+  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+definitions:
+
+  frame-master:
+    description: Indicates dai-link frame master.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/phandle-array
+      - maxItems: 1
+
+  bitclock-master:
+    description: Indicates dai-link bit clock master
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/phandle-array
+      - maxItems: 1
+
+  frame-inversion:
+    description: dai-link uses frame clock inversion
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  bitclock-inversion:
+    description: dai-link uses bit clock inversion
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  dai-tdm-slot-num:
+    description: see tdm-slot.txt.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  dai-tdm-slot-width:
+    description: see tdm-slot.txt.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  system-clock-frequency:
+    description: |
+      If a clock is specified and a multiplication factor is given with
+      mclk-fs, the clock will be set to the calculated mclk frequency
+      when the stream starts.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  system-clock-direction-out:
+    description: |
+      specifies clock direction as 'out' on initialization.
+      It is useful for some aCPUs with fixed clocks.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  mclk-fs:
+    description: |
+      Multiplication factor between stream rate and codec mclk.
+      When defined, mclk-fs property defined in dai-link sub nodes are ignored.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  aux-devs:
+    description: |
+      List of phandles pointing to auxiliary devices, such
+      as amplifiers, to be added to the sound card.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+
+  convert-rate:
+    description: CPU to Codec rate convert.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  convert-channels:
+    description: CPU to Codec rate channels.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  prefix:
+    description: "device name prefix"
+    $ref: /schemas/types.yaml#/definitions/string
+
+  label:
+    maxItems: 1
+
+  routing:
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the
+      connection's sink, the second being the connection's source.
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+
+  widgets:
+    description: User specified audio sound widgets.
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+
+  pin-switches:
+    description: the widget names for which pin switches must be created.
+    $ref: /schemas/types.yaml#/definitions/string-array
+
+  format:
+    description: audio format.
+    items:
+      enum:
+        - i2s
+        - right_j
+        - left_j
+        - dsp_a
+        - dsp_b
+        - ac97
+        - pdm
+        - msb
+        - lsb
+
+  dai:
+    type: object
+    properties:
+      sound-dai:
+        maxItems: 1
+
+      # common properties
+      mclk-fs:
+        $ref: "#/definitions/mclk-fs"
+      prefix:
+        $ref: "#/definitions/prefix"
+      frame-inversion:
+        $ref: "#/definitions/frame-inversion"
+      bitclock-inversion:
+        $ref: "#/definitions/bitclock-inversion"
+      frame-master:
+        $ref: /schemas/types.yaml#/definitions/flag
+      bitclock-master:
+        $ref: /schemas/types.yaml#/definitions/flag
+
+      dai-tdm-slot-num:
+        $ref: "#/definitions/dai-tdm-slot-num"
+      dai-tdm-slot-width:
+        $ref: "#/definitions/dai-tdm-slot-width"
+      clocks:
+        maxItems: 1
+      system-clock-frequency:
+        $ref: "#/definitions/system-clock-frequency"
+      system-clock-direction-out:
+        $ref: "#/definitions/system-clock-direction-out"
+    required:
+      - sound-dai
+
+properties:
+  compatible:
+    contains:
+      enum:
+        - simple-audio-card
+        - simple-scu-audio-card
+
+  "#address-cells":
+    const: 1
+  "#size-cells":
+    const: 0
+
+  label:
+    $ref: "#/definitions/label"
+
+  simple-audio-card,name:
+    description: User specified audio sound card name.
+    $ref: /schemas/types.yaml#/definitions/string
+
+# use patternProperties to avoid naming "xxx,yyy" issue
+patternProperties:
+  "^simple-audio-card,widgets$":
+    $ref: "#/definitions/widgets"
+  "^simple-audio-card,routing$":
+    $ref: "#/definitions/routing"
+  "^simple-audio-card,cpu(@[0-9a-f]+)?":
+    $ref: "#/definitions/dai"
+  "^simple-audio-card,codec(@[0-9a-f]+)?":
+    $ref: "#/definitions/dai"
+
+  # common properties
+  "^simple-audio-card,frame-master$":
+    $ref: "#/definitions/frame-master"
+  "^simple-audio-card,bitclock-master$":
+    $ref: "#/definitions/bitclock-master"
+  "^simple-audio-card,frame-inversion$":
+    $ref: "#/definitions/frame-inversion"
+  "^simple-audio-card,bitclock-inversion$":
+    $ref: "#/definitions/bitclock-inversion"
+  "^simple-audio-card,format$":
+    $ref: "#/definitions/format"
+  "^simple-audio-card,mclk-fs$":
+    $ref: "#/definitions/mclk-fs"
+  "^simple-audio-card,aux-devs$":
+    $ref: "#/definitions/aux-devs"
+  "^simple-audio-card,convert-rate$":
+    $ref: "#/definitions/convert-rate"
+  "^simple-audio-card,convert-channels$":
+    $ref: "#/definitions/convert-channels"
+  "^simple-audio-card,prefix$":
+    $ref: "#/definitions/prefix"
+  "^simple-audio-card,pin-switches$":
+    $ref: "#/definitions/pin-switches"
+  "^simple-audio-card,hp-det-gpio$":
+    maxItems: 1
+  "^simple-audio-card,mic-det-gpio$":
+    maxItems: 1
+
+  "^simple-audio-card,dai-link(@[0-9a-f]+)?$":
+    description: |
+      Container for dai-link level properties and the CPU and CODEC sub-nodes.
+      This container may be omitted when the card has only one DAI link.
+    type: object
+    properties:
+      reg:
+        maxItems: 1
+
+      # common properties
+      frame-master:
+        $ref: "#/definitions/frame-master"
+      bitclock-master:
+        $ref: "#/definitions/bitclock-master"
+      frame-inversion:
+        $ref: "#/definitions/frame-inversion"
+      bitclock-inversion:
+        $ref: "#/definitions/bitclock-inversion"
+      format:
+        $ref: "#/definitions/format"
+      mclk-fs:
+        $ref: "#/definitions/mclk-fs"
+      aux-devs:
+        $ref: "#/definitions/aux-devs"
+      convert-rate:
+        $ref: "#/definitions/convert-rate"
+      convert-channels:
+        $ref: "#/definitions/convert-channels"
+      prefix:
+        $ref: "#/definitions/prefix"
+      pin-switches:
+        $ref: "#/definitions/pin-switches"
+      hp-det-gpio:
+        maxItems: 1
+      mic-det-gpio:
+        maxItems: 1
+
+    patternProperties:
+      "^cpu(@[0-9a-f]+)?":
+        $ref: "#/definitions/dai"
+      "^codec(@[0-9a-f]+)?":
+        $ref: "#/definitions/dai"
+    additionalProperties: false
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+#--------------------
+# single DAI link
+#--------------------
+  - |
+    sound {
+        compatible = "simple-audio-card";
+        simple-audio-card,name = "VF610-Tower-Sound-Card";
+        simple-audio-card,format = "left_j";
+        simple-audio-card,bitclock-master = <&dailink0_master>;
+        simple-audio-card,frame-master = <&dailink0_master>;
+        simple-audio-card,widgets =
+                "Microphone", "Microphone Jack",
+                "Headphone", "Headphone Jack",
+                "Speaker", "External Speaker";
+        simple-audio-card,routing =
+                "MIC_IN", "Microphone Jack",
+                "Headphone Jack", "HP_OUT",
+                "External Speaker", "LINE_OUT";
+
+        simple-audio-card,cpu {
+            sound-dai = <&sh_fsi2 0>;
+        };
+
+        dailink0_master: simple-audio-card,codec {
+            sound-dai = <&ak4648>;
+            clocks = <&osc>;
+        };
+    };
+
+#--------------------
+# Multi DAI links
+#--------------------
+  - |
+    sound {
+        compatible = "simple-audio-card";
+        simple-audio-card,name = "Cubox Audio";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        simple-audio-card,dai-link@0 {		/* I2S - HDMI */
+            reg = <0>;
+            format = "i2s";
+            cpu {
+                sound-dai = <&audio0>;
+            };
+            codec {
+                sound-dai = <&tda998x0>;
+            };
+        };
+
+        simple-audio-card,dai-link@1 {		/* S/PDIF - HDMI */
+            reg = <1>;
+            cpu {
+                sound-dai = <&audio1>;
+            };
+            codec {
+                sound-dai = <&tda998x1>;
+            };
+        };
+
+        simple-audio-card,dai-link@2 {		/* S/PDIF - S/PDIF */
+            reg = <2>;
+            cpu {
+                sound-dai = <&audio2>;
+            };
+            codec {
+                sound-dai = <&spdif_codec>;
+            };
+        };
+    };
+
+#--------------------
+# route audio from IMX6 SSI2 through TLV320DAC3100 codec
+# through TPA6130A2 amplifier to headphones:
+#--------------------
+  - |
+    sound {
+        compatible = "simple-audio-card";
+
+        simple-audio-card,widgets =
+            "Headphone", "Headphone Jack";
+        simple-audio-card,routing =
+            "Headphone Jack", "HPLEFT",
+            "Headphone Jack", "HPRIGHT",
+            "LEFTIN", "HPL",
+            "RIGHTIN", "HPR";
+        simple-audio-card,aux-devs = <&amp>;
+        simple-audio-card,cpu {
+            sound-dai = <&ssi2>;
+        };
+        simple-audio-card,codec {
+            sound-dai = <&codec>;
+            clocks = <&clocks>;
+        };
+    };
+
+#--------------------
+# Sampling Rate Conversion
+#--------------------
+  - |
+    sound {
+        compatible = "simple-audio-card";
+
+        simple-audio-card,name = "rsnd-ak4643";
+        simple-audio-card,format = "left_j";
+        simple-audio-card,bitclock-master = <&sndcodec>;
+        simple-audio-card,frame-master = <&sndcodec>;
+
+        simple-audio-card,convert-rate = <48000>;
+
+        simple-audio-card,prefix = "ak4642";
+        simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback",
+                                    "DAI0 Capture", "ak4642 Capture";
+
+        sndcpu: simple-audio-card,cpu {
+            sound-dai = <&rcar_sound>;
+        };
+
+        sndcodec: simple-audio-card,codec {
+            sound-dai = <&ak4643>;
+            system-clock-frequency = <11289600>;
+        };
+    };
+
+#--------------------
+# 2 CPU 1 Codec (Mixing)
+#--------------------
+  - |
+    sound {
+        compatible = "simple-audio-card";
+
+        simple-audio-card,name = "rsnd-ak4643";
+        simple-audio-card,format = "left_j";
+        simple-audio-card,bitclock-master = <&dpcmcpu>;
+        simple-audio-card,frame-master = <&dpcmcpu>;
+
+        simple-audio-card,convert-rate = <48000>;
+        simple-audio-card,convert-channels = <2>;
+
+        simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback",
+                                    "ak4642 Playback", "DAI1 Playback";
+
+        dpcmcpu: simple-audio-card,cpu@0 {
+            sound-dai = <&rcar_sound 0>;
+        };
+
+        simple-audio-card,cpu@1 {
+            sound-dai = <&rcar_sound 1>;
+        };
+
+        simple-audio-card,codec {
+            prefix = "ak4642";
+            sound-dai = <&ak4643>;
+            clocks = <&audio_clock>;
+        };
+    };
+
+#--------------------
+# Multi DAI links with DPCM:
+#
+# CPU0 ------ ak4613
+# CPU1 ------ PCM3168A-p  /* DPCM 1ch/2ch */
+# CPU2 --/                /* DPCM 3ch/4ch */
+# CPU3 --/                /* DPCM 5ch/6ch */
+# CPU4 --/                /* DPCM 7ch/8ch */
+# CPU5 ------ PCM3168A-c
+#--------------------
+  - |
+    sound {
+        compatible = "simple-audio-card";
+
+        simple-audio-card,routing =
+            "pcm3168a Playback", "DAI1 Playback",
+            "pcm3168a Playback", "DAI2 Playback",
+            "pcm3168a Playback", "DAI3 Playback",
+            "pcm3168a Playback", "DAI4 Playback";
+
+        simple-audio-card,dai-link@0 {
+            format = "left_j";
+            bitclock-master = <&sndcpu0>;
+            frame-master = <&sndcpu0>;
+
+            sndcpu0: cpu {
+                sound-dai = <&rcar_sound 0>;
+            };
+            codec {
+                sound-dai = <&ak4613>;
+            };
+        };
+
+        simple-audio-card,dai-link@1 {
+            format = "i2s";
+            bitclock-master = <&sndcpu1>;
+            frame-master = <&sndcpu1>;
+
+            convert-channels = <8>; /* TDM Split */
+
+            sndcpu1: cpu@0 {
+                sound-dai = <&rcar_sound 1>;
+            };
+            cpu@1 {
+                sound-dai = <&rcar_sound 2>;
+            };
+            cpu@2 {
+                sound-dai = <&rcar_sound 3>;
+            };
+            cpu@3 {
+                sound-dai = <&rcar_sound 4>;
+            };
+            codec {
+                mclk-fs = <512>;
+                prefix = "pcm3168a";
+                dai-tdm-slot-num = <8>;
+                sound-dai = <&pcm3168a 0>;
+            };
+        };
+
+        simple-audio-card,dai-link@2 {
+            format = "i2s";
+            bitclock-master = <&sndcpu2>;
+            frame-master = <&sndcpu2>;
+
+            sndcpu2: cpu {
+                sound-dai = <&rcar_sound 5>;
+            };
+            codec {
+                mclk-fs = <512>;
+                prefix = "pcm3168a";
+                sound-dai = <&pcm3168a 1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
index ab2268c0ee67..306ac3d006dc 100644
--- a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
+++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
@@ -63,6 +63,55 @@ properties:
       - $ref: /schemas/types.yaml#/definitions/uint32
       - enum: [0, 1, 2]
 
+  ti,pdm-edge-select:
+    description: |
+       Defines the PDMCLK sampling edge configuration for the PDM inputs.  This
+       array is defined as <PDMIN1 PDMIN2 PDMIN3 PDMIN4>.
+
+       0 - (default) Odd channel is latched on the negative edge and even
+       channel is latched on the the positive edge.
+       1 - Odd channel is latched on the positive edge and even channel is
+       latched on the the negative edge.
+
+       PDMIN1 - PDMCLK latching edge used for channel 1 and 2 data
+       PDMIN2 - PDMCLK latching edge used for channel 3 and 4 data
+       PDMIN3 - PDMCLK latching edge used for channel 5 and 6 data
+       PDMIN4 - PDMCLK latching edge used for channel 7 and 8 data
+
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+      - minItems: 1
+        maxItems: 4
+        items:
+          maximum: 1
+        default: [0, 0, 0, 0]
+
+  ti,gpi-config:
+    description: |
+       Defines the configuration for the general purpose input pins (GPI).
+       The array is defined as <GPI1 GPI2 GPI3 GPI4>.
+
+       0 - (default) disabled
+       1 - GPIX is configured as a general-purpose input (GPI)
+       2 - GPIX is configured as a master clock input (MCLK)
+       3 - GPIX is configured as an ASI input for daisy-chain (SDIN)
+       4 - GPIX is configured as a PDM data input for channel 1 and channel
+            (PDMDIN1)
+       5 - GPIX is configured as a PDM data input for channel 3 and channel
+            (PDMDIN2)
+       6 - GPIX is configured as a PDM data input for channel 5 and channel
+            (PDMDIN3)
+       7 - GPIX is configured as a PDM data input for channel 7 and channel
+            (PDMDIN4)
+
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+      - minItems: 1
+        maxItems: 4
+        items:
+          maximum: 7
+        default: [0, 0, 0, 0]
+
 required:
   - compatible
   - reg
@@ -77,6 +126,8 @@ examples:
         compatible = "ti,tlv320adc5140";
         reg = <0x4c>;
         ti,mic-bias-source = <6>;
+        ti,pdm-edge-select = <0 1 0 1>;
+        ti,gpi-config = <4 5 6 7>;
         reset-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
       };
     };
diff --git a/Documentation/devicetree/bindings/sound/wm8994.txt b/Documentation/devicetree/bindings/sound/wm8994.txt
index 68cccc4653ba..367b58ce1bb9 100644
--- a/Documentation/devicetree/bindings/sound/wm8994.txt
+++ b/Documentation/devicetree/bindings/sound/wm8994.txt
@@ -14,9 +14,15 @@ Required properties:
   - #gpio-cells : Must be 2. The first cell is the pin number and the
     second cell is used to specify optional parameters (currently unused).
 
-  - AVDD2-supply, DBVDD1-supply, DBVDD2-supply, DBVDD3-supply, CPVDD-supply,
-    SPKVDD1-supply, SPKVDD2-supply : power supplies for the device, as covered
-    in Documentation/devicetree/bindings/regulator/regulator.txt
+  - power supplies for the device, as covered in
+    Documentation/devicetree/bindings/regulator/regulator.txt, depending
+    on compatible:
+    - for wlf,wm1811 and wlf,wm8958:
+      AVDD1-supply, AVDD2-supply, DBVDD1-supply, DBVDD2-supply, DBVDD3-supply,
+      DCVDD-supply, CPVDD-supply, SPKVDD1-supply, SPKVDD2-supply
+    - for wlf,wm8994:
+      AVDD1-supply, AVDD2-supply, DBVDD-supply, DCVDD-supply, CPVDD-supply,
+      SPKVDD1-supply, SPKVDD2-supply
 
 Optional properties:
 
@@ -73,11 +79,11 @@ wm8994: codec@1a {
 
 	lineout1-se;
 
+	AVDD1-supply = <&regulator>;
 	AVDD2-supply = <&regulator>;
 	CPVDD-supply = <&regulator>;
-	DBVDD1-supply = <&regulator>;
-	DBVDD2-supply = <&regulator>;
-	DBVDD3-supply = <&regulator>;
+	DBVDD-supply = <&regulator>;
+	DCVDD-supply = <&regulator>;
 	SPKVDD1-supply = <&regulator>;
 	SPKVDD2-supply = <&regulator>;
 };
diff --git a/Documentation/devicetree/bindings/sound/zl38060.yaml b/Documentation/devicetree/bindings/sound/zl38060.yaml
new file mode 100644
index 000000000000..338e2a13c775
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/zl38060.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/zl38060.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ZL38060 Connected Home Audio Processor from Microsemi.
+
+description: |
+  The ZL38060 is a "Connected Home Audio Processor" from Microsemi,
+  which consists of a Digital Signal Processor (DSP), several Digital
+  Audio Interfaces (DAIs), analog outputs, and a block of 14 GPIOs.
+
+maintainers:
+  - Jaroslav Kysela <perex@perex.cz>
+  - Takashi Iwai <tiwai@suse.com>
+
+properties:
+  compatible:
+    const: mscc,zl38060
+
+  reg:
+    description:
+      SPI device address.
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 24000000
+
+  reset-gpios:
+    description:
+      A GPIO line handling reset of the chip. As the line is active low,
+      it should be marked GPIO_ACTIVE_LOW (see ../gpio/gpio.txt)
+    maxItems: 1
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-controller: true
+
+  '#sound-dai-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - '#gpio-cells'
+  - gpio-controller
+  - '#sound-dai-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        codec: zl38060@0 {
+            gpio-controller;
+            #gpio-cells = <2>;
+            #sound-dai-cells = <0>;
+            compatible = "mscc,zl38060";
+            reg = <0>;
+            spi-max-frequency = <12000000>;
+            reset-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+        };
+    };