Merge branch 'next' into for-linus

Prepare first round of input updates for 4.9 merge window.

7 files changed, 123 insertions, 41 deletions

diff --git a/Documentation/devicetree/bindings/input/adc-keys.txt b/Documentation/devicetree/bindings/input/adc-keys.txt
new file mode 100644
index 000000000000..e551814629b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/adc-keys.txt
@@ -0,0 +1,49 @@
+ADC attached resistor ladder buttons
+------------------------------------
+
+Required properties:
+ - compatible: "adc-keys"
+ - io-channels: Phandle to an ADC channel
+ - io-channel-names = "buttons";
+ - keyup-threshold-microvolt: Voltage at which all the keys are considered up.
+
+Optional properties:
+	- poll-interval: Poll interval time in milliseconds
+	- autorepeat: Boolean, Enable auto repeat feature of Linux input
+	  subsystem.
+
+Each button (key) is represented as a sub-node of "adc-keys":
+
+Required subnode-properties:
+	- label: Descriptive name of the key.
+	- linux,code: Keycode to emit.
+	- press-threshold-microvolt: Voltage ADC input when this key is pressed.
+
+Example:
+
+#include <dt-bindings/input/input.h>
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&lradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <2000000>;
+
+		button-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			press-threshold-microvolt = <1500000>;
+		};
+
+		button-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			press-threshold-microvolt = <1000000>;
+		};
+
+		button-enter {
+			label = "Enter";
+			linux,code = <KEY_ENTER>;
+			press-threshold-microvolt = <500000>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/input/gpio-decoder.txt b/Documentation/devicetree/bindings/input/gpio-decoder.txt
new file mode 100644
index 000000000000..14a77fb96cf0
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/gpio-decoder.txt
@@ -0,0 +1,23 @@
+* GPIO Decoder DT bindings
+
+Required Properties:
+- compatible: should be "gpio-decoder"
+- gpios: a spec of gpios (at least two) to be decoded to a number with
+  first entry representing the MSB.
+
+Optional Properties:
+- decoder-max-value: Maximum possible value that can be reported by
+  the gpios.
+- linux,axis: the input subsystem axis to map to (ABS_X/ABS_Y).
+  Defaults to 0 (ABS_X).
+
+Example:
+	gpio-decoder0 {
+		compatible = "gpio-decoder";
+		gpios = <&pca9536 3 GPIO_ACTIVE_HIGH>,
+			<&pca9536 2 GPIO_ACTIVE_HIGH>,
+			<&pca9536 1 GPIO_ACTIVE_HIGH>,
+			<&pca9536 0 GPIO_ACTIVE_HIGH>;
+		linux,axis = <0>; /* ABS_X */
+		decoder-max-value = <9>;
+	};
diff --git a/Documentation/devicetree/bindings/input/gpio-keys-polled.txt b/Documentation/devicetree/bindings/input/gpio-keys-polled.txt
index 95d0fb11a787..4d9a3717eaaf 100644
--- a/Documentation/devicetree/bindings/input/gpio-keys-polled.txt
+++ b/Documentation/devicetree/bindings/input/gpio-keys-polled.txt
@@ -34,11 +34,10 @@ Example nodes:
 
 	gpio_keys_polled {
 			compatible = "gpio-keys-polled";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			poll-interval = <100>;
 			autorepeat;
-			button@21 {
+
+			button21 {
 				label = "GPIO Key UP";
 				linux,code = <103>;
 				gpios = <&gpio1 0 1>;
diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
index f99528da1b1d..6db22103e2dd 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
@@ -19,6 +19,7 @@ Required properties:
            or:  "edt,edt-ft5306"
            or:  "edt,edt-ft5406"
            or:  "edt,edt-ft5506"
+           or:  "focaltech,ft6236"
 
  - reg:         I2C slave address of the chip (0x38)
  - interrupt-parent: a phandle pointing to the interrupt controller
@@ -43,6 +44,13 @@ Optional properties:
 
  - offset:      allows setting the edge compensation in the range from
                 0 to 31.
+ - touchscreen-size-x	   : See touchscreen.txt
+ - touchscreen-size-y	   : See touchscreen.txt
+ - touchscreen-fuzz-x      : See touchscreen.txt
+ - touchscreen-fuzz-y      : See touchscreen.txt
+ - touchscreen-inverted-x  : See touchscreen.txt
+ - touchscreen-inverted-y  : See touchscreen.txt
+ - touchscreen-swapped-x-y : See touchscreen.txt
 
 Example:
 	polytouch: edt-ft5x06@38 {
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt b/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt
new file mode 100644
index 000000000000..5a19f4c3e9d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt
@@ -0,0 +1,27 @@
+* Elan eKTF2127 I2C touchscreen controller
+
+Required properties:
+ - compatible		  : "elan,ektf2127"
+ - reg			  : I2C slave address of the chip (0x40)
+ - interrupt-parent	  : a phandle pointing to the interrupt controller
+			    serving the interrupt for this chip
+ - interrupts		  : interrupt specification for the ektf2127 interrupt
+ - power-gpios		  : GPIO specification for the pin connected to the
+			    ektf2127's wake input. This needs to be driven high
+			    to take ektf2127 out of it's low power state
+
+For additional optional properties see: touchscreen.txt
+
+Example:
+
+i2c@00000000 {
+	ektf2127: touchscreen@15 {
+		compatible = "elan,ektf2127";
+		reg = <0x15>;
+		interrupt-parent = <&pio>;
+		interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>
+		power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>;
+		touchscreen-inverted-x;
+		touchscreen-swapped-x-y;
+	};
+};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/focaltech-ft6236.txt b/Documentation/devicetree/bindings/input/touchscreen/focaltech-ft6236.txt
deleted file mode 100644
index 777521da3da5..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/focaltech-ft6236.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-* FocalTech FT6236 I2C touchscreen controller
-
-Required properties:
- - compatible		  : "focaltech,ft6236"
- - reg			  : I2C slave address of the chip (0x38)
- - interrupt-parent	  : a phandle pointing to the interrupt controller
-			    serving the interrupt for this chip
- - interrupts		  : interrupt specification for the touch controller
-			    interrupt
- - reset-gpios		  : GPIO specification for the RSTN input
- - touchscreen-size-x	  : horizontal resolution of touchscreen (in pixels)
- - touchscreen-size-y	  : vertical resolution of touchscreen (in pixels)
-
-Optional properties:
- - touchscreen-fuzz-x	  : horizontal noise value of the absolute input
-			    device (in pixels)
- - touchscreen-fuzz-y	  : vertical noise value of the absolute input
-			    device (in pixels)
- - touchscreen-inverted-x : X axis is inverted (boolean)
- - touchscreen-inverted-y : Y axis is inverted (boolean)
- - touchscreen-swapped-x-y: X and Y axis are swapped (boolean)
-			    Swapping is done after inverting the axis
-
-Example:
-
-	ft6x06@38 {
-		compatible = "focaltech,ft6236";
-		reg = <0x38>;
-		interrupt-parent = <&gpio>;
-		interrupts = <23 2>;
-		touchscreen-size-x = <320>;
-		touchscreen-size-y = <480>;
-		touchscreen-inverted-x;
-		touchscreen-swapped-x-y;
-	};
diff --git a/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt b/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt
index e30e0b93f2b3..3e5b9793341f 100644
--- a/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt
+++ b/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt
@@ -1,13 +1,24 @@
-Texas Instruments TPS65218 power button
+Texas Instruments TPS65217 and TPS65218 power button
+
+This module is part of the TPS65217/TPS65218. For more details about the whole
+TPS65217 chip see Documentation/devicetree/bindings/regulator/tps65217.txt.
 
 This driver provides a simple power button event via an Interrupt.
 
 Required properties:
-- compatible: should be "ti,tps65218-pwrbutton"
+- compatible: should be "ti,tps65217-pwrbutton" or "ti,tps65218-pwrbutton"
+
+Required properties for TPS65218:
 - interrupts: should be one of the following
    - <3 IRQ_TYPE_EDGE_BOTH>: For controllers compatible with tps65218
 
-Example:
+Examples:
+
+&tps {
+	tps65217-pwrbutton {
+		compatible = "ti,tps65217-pwrbutton";
+	};
+};
 
 &tps {
 	power-button {