Merge branch 'next' into for-linus

Prepare input updates for 6.1 merge window.

19 files changed, 600 insertions, 134 deletions

diff --git a/Documentation/devicetree/bindings/input/adc-joystick.yaml b/Documentation/devicetree/bindings/input/adc-joystick.yaml
index 64d961458ac7..da0f8dfca8bf 100644
--- a/Documentation/devicetree/bindings/input/adc-joystick.yaml
+++ b/Documentation/devicetree/bindings/input/adc-joystick.yaml
@@ -14,6 +14,9 @@ description: >
   Bindings for joystick devices connected to ADC controllers supporting
   the Industrial I/O subsystem.
 
+allOf:
+  - $ref: input.yaml#
+
 properties:
   compatible:
     const: adc-joystick
@@ -28,6 +31,8 @@ properties:
       https://github.com/devicetree-org/dt-schema/blob/master/schemas/iio/iio-consumer.yaml
       for details.
 
+  poll-interval: true
+
   '#address-cells':
     const: 1
 
diff --git a/Documentation/devicetree/bindings/input/adi,adp5588.yaml b/Documentation/devicetree/bindings/input/adi,adp5588.yaml
new file mode 100644
index 000000000000..26ea66834ae2
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/adi,adp5588.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/adi,adp5588.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADP5588 Keypad Controller
+
+maintainers:
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+  Analog Devices Mobile I/O Expander and QWERTY Keypad Controller
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADP5588.pdf
+
+allOf:
+  - $ref: matrix-keymap.yaml#
+  - $ref: input.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,adp5587
+      - adi,adp5588
+
+  reg:
+    maxItems: 1
+
+  vcc-supply:
+    description: Supply Voltage Input
+
+  reset-gpios:
+    description:
+      If specified, it will be asserted during driver probe. As the line is
+      active low, it should be marked GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  gpio-controller:
+    description:
+      This property applies if either keypad,num-rows lower than 8 or
+      keypad,num-columns lower than 10.
+
+  '#gpio-cells':
+    const: 2
+
+  interrupt-controller:
+    description:
+      This property applies if either keypad,num-rows lower than 8 or
+      keypad,num-columns lower than 10.
+
+  '#interrupt-cells':
+    const: 2
+
+  adi,unlock-keys:
+    description:
+      Specifies a maximum of 2 keys that can be used to unlock the keypad.
+      If this property is set, the keyboard will be locked and only unlocked
+      after these keys are pressed. If only one key is set, a double click is
+      needed to unlock the keypad. The value of this property cannot be bigger
+      or equal than keypad,num-rows * keypad,num-columns.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - keypad,num-rows
+  - keypad,num-columns
+  - linux,keymap
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        keys@34 {
+            compatible = "adi,adp5588";
+            reg = <0x34>;
+
+            vcc-supply = <&vcc>;
+            interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio>;
+            reset-gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+
+            keypad,num-rows = <1>;
+            keypad,num-columns = <9>;
+            linux,keymap = <
+                MATRIX_KEY(0x00, 0x00, KEY_1)
+                MATRIX_KEY(0x00, 0x01, KEY_2)
+                MATRIX_KEY(0x00, 0x02, KEY_3)
+                MATRIX_KEY(0x00, 0x03, KEY_4)
+                MATRIX_KEY(0x00, 0x04, KEY_5)
+                MATRIX_KEY(0x00, 0x05, KEY_6)
+                MATRIX_KEY(0x00, 0x06, KEY_7)
+                MATRIX_KEY(0x00, 0x07, KEY_8)
+                MATRIX_KEY(0x00, 0x08, KEY_9)
+            >;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/input/da9062-onkey.txt b/Documentation/devicetree/bindings/input/da9062-onkey.txt
index 5f9fbc68e58a..e5eef59a93dc 100644
--- a/Documentation/devicetree/bindings/input/da9062-onkey.txt
+++ b/Documentation/devicetree/bindings/input/da9062-onkey.txt
@@ -2,7 +2,7 @@
 
 This module is part of the DA9061/DA9062/DA9063. For more details about entire
 DA9062 and DA9061 chips see Documentation/devicetree/bindings/mfd/da9062.txt
-For DA9063 see Documentation/devicetree/bindings/mfd/da9063.txt
+For DA9063 see Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
 
 This module provides the KEY_POWER event.
 
diff --git a/Documentation/devicetree/bindings/input/elan,ekth6915.yaml b/Documentation/devicetree/bindings/input/elan,ekth6915.yaml
new file mode 100644
index 000000000000..05e6f2df604c
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/elan,ekth6915.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/elan,ekth6915.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Elan eKTH6915 touchscreen controller
+
+maintainers:
+  - Douglas Anderson <dianders@chromium.org>
+
+description:
+  Supports the Elan eKTH6915 touchscreen controller.
+  This touchscreen controller uses the i2c-hid protocol with a reset GPIO.
+
+properties:
+  compatible:
+    items:
+      - const: elan,ekth6915
+
+  reg:
+    const: 0x10
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    description: Reset GPIO; not all touchscreens using eKTH6915 hook this up.
+
+  vcc33-supply:
+    description: The 3.3V supply to the touchscreen.
+
+  vccio-supply:
+    description:
+      The IO supply to the touchscreen. Need not be specified if this is the
+      same as the 3.3V supply.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - vcc33-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      ap_ts: touchscreen@10 {
+        compatible = "elan,ekth6915";
+        reg = <0x10>;
+
+        interrupt-parent = <&tlmm>;
+        interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+        reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+        vcc33-supply = <&pp3300_ts>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/input/fsl,scu-key.yaml b/Documentation/devicetree/bindings/input/fsl,scu-key.yaml
new file mode 100644
index 000000000000..e6266d188266
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/fsl,scu-key.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/fsl,scu-key.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX SCU Client Device Node - SCU key bindings based on SCU Message Protocol
+
+maintainers:
+  - Dong Aisheng <aisheng.dong@nxp.com>
+
+description: i.MX SCU Client Device Node
+  Client nodes are maintained as children of the relevant IMX-SCU device node.
+
+allOf:
+  - $ref: input.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx8qxp-sc-key
+      - const: fsl,imx-sc-key
+
+  linux,keycodes:
+    maxItems: 1
+
+required:
+  - compatible
+  - linux,keycodes
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+
+    keys {
+        compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key";
+        linux,keycodes = <KEY_POWER>;
+    };
diff --git a/Documentation/devicetree/bindings/input/hid-over-i2c.txt b/Documentation/devicetree/bindings/input/hid-over-i2c.txt
deleted file mode 100644
index 34c43d3bddfd..000000000000
--- a/Documentation/devicetree/bindings/input/hid-over-i2c.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-* HID over I2C Device-Tree bindings
-
-HID over I2C provides support for various Human Interface Devices over the
-I2C bus. These devices can be for example touchpads, keyboards, touch screens
-or sensors.
-
-The specification has been written by Microsoft and is currently available here:
-http://msdn.microsoft.com/en-us/library/windows/hardware/hh852380.aspx
-
-If this binding is used, the kernel module i2c-hid will handle the communication
-with the device and the generic hid core layer will handle the protocol.
-
-Required properties:
-- compatible: must be "hid-over-i2c"
-- reg: i2c slave address
-- hid-descr-addr: HID descriptor address
-- interrupts: interrupt line
-
-Additional optional properties:
-
-Some devices may support additional optional properties to help with, e.g.,
-power sequencing. The following properties can be supported by one or more
-device-specific compatible properties, which should be used in addition to the
-"hid-over-i2c" string.
-
-- compatible:
-  * "wacom,w9013" (Wacom W9013 digitizer). Supports:
-    - vdd-supply (3.3V)
-    - vddl-supply (1.8V)
-    - post-power-on-delay-ms
-
-- vdd-supply: phandle of the regulator that provides the supply voltage.
-- post-power-on-delay-ms: time required by the device after enabling its regulators
-  or powering it on, before it is ready for communication.
-- touchscreen-inverted-x: See touchscreen.txt
-- touchscreen-inverted-y: See touchscreen.txt
-
-Example:
-
-	i2c-hid-dev@2c {
-		compatible = "hid-over-i2c";
-		reg = <0x2c>;
-		hid-descr-addr = <0x0020>;
-		interrupt-parent = <&gpx3>;
-		interrupts = <3 2>;
-	};
diff --git a/Documentation/devicetree/bindings/input/hid-over-i2c.yaml b/Documentation/devicetree/bindings/input/hid-over-i2c.yaml
new file mode 100644
index 000000000000..7156b08f7645
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/hid-over-i2c.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/hid-over-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HID over I2C Devices
+
+maintainers:
+  - Benjamin Tissoires <benjamin.tissoires@redhat.com>
+  - Jiri Kosina <jkosina@suse.cz>
+
+description: |+
+  HID over I2C provides support for various Human Interface Devices over the
+  I2C bus. These devices can be for example touchpads, keyboards, touch screens
+  or sensors.
+
+  The specification has been written by Microsoft and is currently available here:
+  https://msdn.microsoft.com/en-us/library/windows/hardware/hh852380.aspx
+
+  If this binding is used, the kernel module i2c-hid will handle the communication
+  with the device and the generic hid core layer will handle the protocol.
+
+allOf:
+  - $ref: /schemas/input/touchscreen/touchscreen.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - wacom,w9013
+          - const: hid-over-i2c
+      - description: Just "hid-over-i2c" alone is allowed, but not recommended.
+        const: hid-over-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  hid-descr-addr:
+    description: HID descriptor address
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  post-power-on-delay-ms:
+    description: Time required by the device after enabling its regulators
+      or powering it on, before it is ready for communication.
+
+  touchscreen-inverted-x: true
+
+  touchscreen-inverted-y: true
+
+  vdd-supply:
+    description: 3.3V supply
+
+  vddl-supply:
+    description: 1.8V supply
+
+  wakeup-source: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hid@2c {
+            compatible = "hid-over-i2c";
+            reg = <0x2c>;
+            hid-descr-addr = <0x0020>;
+            interrupts = <3 2>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/input/ibm,op-panel.yaml b/Documentation/devicetree/bindings/input/ibm,op-panel.yaml
new file mode 100644
index 000000000000..29a1879e356d
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ibm,op-panel.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/ibm,op-panel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM Operation Panel
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+allOf:
+  - $ref: input.yaml#
+
+description: |
+  The IBM Operation Panel provides a simple interface to control the connected
+  server. It has a display and three buttons: two directional arrows and one
+  'Enter' button.
+
+properties:
+  compatible:
+    const: ibm,op-panel
+
+  reg:
+    maxItems: 1
+
+  linux,keycodes:
+    minItems: 1
+    maxItems: 3
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/i2c/i2c.h>
+    #include <dt-bindings/input/input.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ibm-op-panel@62 {
+            compatible = "ibm,op-panel";
+            reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+            linux,keycodes = <KEY_UP>, <KEY_DOWN>, <KEY_ENTER>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/mediatek,mt6779-keypad.yaml b/Documentation/devicetree/bindings/input/mediatek,mt6779-keypad.yaml
index 03ebd2665d07..387d0448ff77 100644
--- a/Documentation/devicetree/bindings/input/mediatek,mt6779-keypad.yaml
+++ b/Documentation/devicetree/bindings/input/mediatek,mt6779-keypad.yaml
@@ -49,6 +49,12 @@ properties:
     maximum: 256
     default: 16
 
+  mediatek,keys-per-group:
+    description: each (row, column) group has multiple keys
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 1
+    maximum: 2
+
 required:
   - compatible
   - reg
@@ -56,7 +62,7 @@ required:
   - clocks
   - clock-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml b/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml
new file mode 100644
index 000000000000..2f72ec418415
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/mediatek,pmic-keys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek PMIC Keys
+
+maintainers:
+  - Chen Zhong <chen.zhong@mediatek.com>
+
+allOf:
+  - $ref: input.yaml#
+
+description: |
+  There are two key functions provided by MT6397, MT6323 and other MediaTek
+  PMICs: pwrkey and homekey.
+  The key functions are defined as the subnode of the function node provided
+  by the PMIC that is defined as a Multi-Function Device (MFD).
+
+  For MediaTek MT6323/MT6397 PMIC bindings see
+  Documentation/devicetree/bindings/mfd/mt6397.txt
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt6323-keys
+      - mediatek,mt6331-keys
+      - mediatek,mt6358-keys
+      - mediatek,mt6397-keys
+
+  power-off-time-sec: true
+
+  mediatek,long-press-mode:
+    description: |
+      Key long-press force shutdown setting
+      0 - disabled
+      1 - pwrkey
+      2 - pwrkey+homekey
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+    maximum: 2
+
+patternProperties:
+  "^((power|home)|(key-[a-z0-9-]+|[a-z0-9-]+-key))$":
+    $ref: input.yaml#
+
+    properties:
+      interrupts:
+        minItems: 1
+        items:
+          - description: Key press interrupt
+          - description: Key release interrupt
+
+      interrupt-names: true
+
+      linux-keycodes:
+        maxItems: 1
+
+      wakeup-source: true
+
+    required:
+      - linux,keycodes
+
+    if:
+      properties:
+        interrupt-names:
+          contains:
+            const: powerkey
+    then:
+      properties:
+        interrupt-names:
+          minItems: 1
+          items:
+            - const: powerkey
+            - const: powerkey_r
+    else:
+      properties:
+        interrupt-names:
+          minItems: 1
+          items:
+            - const: homekey
+            - const: homekey_r
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pmic {
+        compatible = "mediatek,mt6397";
+
+        keys {
+          compatible = "mediatek,mt6397-keys";
+          mediatek,long-press-mode = <1>;
+          power-off-time-sec = <0>;
+
+          key-power {
+            linux,keycodes = <KEY_POWER>;
+            wakeup-source;
+          };
+
+          key-home {
+            linux,keycodes = <KEY_VOLUMEDOWN>;
+          };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
deleted file mode 100644
index 9d00f2a8e13a..000000000000
--- a/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-MediaTek MT6397/MT6323 PMIC Keys Device Driver
-
-There are two key functions provided by MT6397/MT6323 PMIC, pwrkey
-and homekey. The key functions are defined as the subnode of the function
-node provided by MT6397/MT6323 PMIC that is being defined as one kind
-of Muti-Function Device (MFD)
-
-For MT6397/MT6323 MFD bindings see:
-Documentation/devicetree/bindings/mfd/mt6397.txt
-
-Required properties:
-- compatible: Should be one of:
-	- "mediatek,mt6397-keys"
-	- "mediatek,mt6323-keys"
-	- "mediatek,mt6358-keys"
-- linux,keycodes: See Documentation/devicetree/bindings/input/input.yaml
-
-Optional Properties:
-- wakeup-source: See Documentation/devicetree/bindings/power/wakeup-source.txt
-- mediatek,long-press-mode: Long press key shutdown setting, 1 for
-	pwrkey only, 2 for pwrkey/homekey together, others for disabled.
-- power-off-time-sec: See Documentation/devicetree/bindings/input/input.yaml
-
-Example:
-
-	pmic: mt6397 {
-		compatible = "mediatek,mt6397";
-
-		...
-
-		mt6397keys: mt6397keys {
-			compatible = "mediatek,mt6397-keys";
-			mediatek,long-press-mode = <1>;
-			power-off-time-sec = <0>;
-
-			power {
-				linux,keycodes = <116>;
-				wakeup-source;
-			};
-
-			home {
-				linux,keycodes = <114>;
-			};
-		};
-
-	};
diff --git a/Documentation/devicetree/bindings/input/pine64,pinephone-keyboard.yaml b/Documentation/devicetree/bindings/input/pine64,pinephone-keyboard.yaml
new file mode 100644
index 000000000000..e4a0ac0fff9a
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/pine64,pinephone-keyboard.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/pine64,pinephone-keyboard.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Pine64 PinePhone keyboard device tree bindings
+
+maintainers:
+  - Samuel Holland <samuel@sholland.org>
+
+description:
+  A keyboard accessory is available for the Pine64 PinePhone and PinePhone Pro.
+  It connects via I2C, providing a raw scan matrix, a flashing interface, and a
+  subordinate I2C bus for communication with a battery charger IC.
+
+properties:
+  compatible:
+    const: pine64,pinephone-keyboard
+
+  reg:
+    const: 0x15
+
+  interrupts:
+    maxItems: 1
+
+  vbat-supply:
+    description: Supply for the keyboard MCU
+
+  wakeup-source: true
+
+  i2c:
+    $ref: /schemas/i2c/i2c-controller.yaml#
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      keyboard@15 {
+        compatible = "pine64,pinephone-keyboard";
+        reg = <0x15>;
+        interrupt-parent = <&r_pio>;
+        interrupts = <0 12 IRQ_TYPE_EDGE_FALLING>; /* PL12 */
+
+        i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          charger@75 {
+            reg = <0x75>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.txt b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.txt
deleted file mode 100644
index 64bb990075c3..000000000000
--- a/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Qualcomm PM8xxx PMIC Vibrator
-
-PROPERTIES
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		    "qcom,pm8058-vib"
-		    "qcom,pm8916-vib"
-		    "qcom,pm8921-vib"
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: address of vibration control register
-
-EXAMPLE
-
-	vibrator@4a {
-		compatible = "qcom,pm8058-vib";
-		reg = <0x4a>;
-	};
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml
new file mode 100644
index 000000000000..c8832cd0d7da
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/qcom,pm8xxx-vib.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PM8xxx PMIC Vibrator
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm8058-vib
+      - qcom,pm8916-vib
+      - qcom,pm8921-vib
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        vibrator@4a {
+            compatible = "qcom,pm8058-vib";
+            reg = <0x4a>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/auo_pixcir_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/auo_pixcir_ts.txt
index f40f21c642b9..b8db975e9f77 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/auo_pixcir_ts.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/auo_pixcir_ts.txt
@@ -17,10 +17,10 @@ Example:
 		auo_pixcir_ts@5c {
 			compatible = "auo,auo_pixcir_ts";
 			reg = <0x5c>;
-			interrupts = <2 0>;
+			interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
 
-			gpios = <&gpf 2 0 2>, /* INT */
-				<&gpf 5 1 0>; /* RST */
+			gpios = <&gpf 2 0 GPIO_LEVEL_HIGH>, /* INT */
+				<&gpf 5 1 GPIO_LEVEL_LOW>; /* RST */
 
 			x-size = <800>;
 			y-size = <600>;
diff --git a/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
index 2e1490a8fe74..ca304357c374 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
@@ -3,15 +3,16 @@
 Required Properties:
 - compatible must be toradex,vf50-touchscreen
 - io-channels: adc channels being used by the Colibri VF50 module
+    IIO ADC for Y-, X-, Y+, X+ connections
 - xp-gpios: FET gate driver for input of X+
 - xm-gpios: FET gate driver for input of X-
 - yp-gpios: FET gate driver for input of Y+
 - ym-gpios: FET gate driver for input of Y-
-- interrupts: pen irq interrupt for touch detection
-- pinctrl-names: "idle", "default", "gpios"
-- pinctrl-0: pinctrl node for pen/touch detection state pinmux
+- interrupts: pen irq interrupt for touch detection, signal from X plate
+- pinctrl-names: "idle", "default"
+- pinctrl-0: pinctrl node for pen/touch detection, pinctrl must provide
+    pull-up resistor on X+, X-.
 - pinctrl-1: pinctrl node for X/Y and pressure measurement (ADC) state pinmux
-- pinctrl-2: pinctrl node for gpios functioning as FET gate drivers
 - vf50-ts-min-pressure: pressure level at which to stop measuring X/Y values
 
 Example:
@@ -26,9 +27,8 @@ Example:
 		ym-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
 		interrupt-parent = <&gpio0>;
 		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "idle","default","gpios";
-		pinctrl-0 = <&pinctrl_touchctrl_idle>;
-		pinctrl-1 = <&pinctrl_touchctrl_default>;
-		pinctrl-2 = <&pinctrl_touchctrl_gpios>;
+		pinctrl-names = "idle","default";
+		pinctrl-0 = <&pinctrl_touchctrl_idle>, <&pinctrl_touchctrl_gpios>;
+		pinctrl-1 = <&pinctrl_touchctrl_default>, <&pinctrl_touchctrl_gpios>;
 		vf50-ts-min-pressure = <200>;
 	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt b/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt
index 5eef5e7d6aae..c9f2c9f578e3 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt
@@ -6,7 +6,7 @@ Required properties:
  - interrupts		  : interrupt specification for the ektf2127 interrupt
  - power-gpios		  : GPIO specification for the pin connected to the
 			    ektf2127's wake input. This needs to be driven high
-			    to take ektf2127 out of it's low power state
+			    to take ektf2127 out of its low power state
 
 For additional optional properties see: touchscreen.txt
 
diff --git a/Documentation/devicetree/bindings/input/touchscreen/elan,elants_i2c.yaml b/Documentation/devicetree/bindings/input/touchscreen/elan,elants_i2c.yaml
index a9b53c2e6f0a..f9053e5e9b24 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/elan,elants_i2c.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/elan,elants_i2c.yaml
@@ -14,9 +14,13 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - elan,ektf3624
-      - elan,ekth3500
+    oneOf:
+      - enum:
+          - elan,ektf3624
+          - elan,ekth3500
+      - items:
+          - const: elan,ekth3915
+          - const: elan,ekth3500
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
index c549924603d2..238b51555c04 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
@@ -54,8 +54,7 @@ Optional properties common with MFD (deprecated):
 				1 -> 3.25 MHz
 				2 || 3 -> 6.5 MHz
 
-Node name must be stmpe_touchscreen and should be child node of stmpe node to
-which it belongs.
+Node should be child node of stmpe node to which it belongs.
 
 Note that common ADC settings of stmpe_touchscreen (child) will take precedence
 over the settings done in MFD.