Merge tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc and other driver updates from Greg KH:
 "Here is the large set of char/misc and other small driver subsystem
  changes for 6.1-rc1. Loads of different things in here:

   - IIO driver updates, additions, and changes. Probably the largest
     part of the diffstat

   - habanalabs driver update with support for new hardware and
     features, the second largest part of the diff.

   - fpga subsystem driver updates and additions

   - mhi subsystem updates

   - Coresight driver updates

   - gnss subsystem updates

   - extcon driver updates

   - icc subsystem updates

   - fsi subsystem updates

   - nvmem subsystem and driver updates

   - misc driver updates

   - speakup driver additions for new features

   - lots of tiny driver updates and cleanups

  All of these have been in the linux-next tree for a while with no
  reported issues"

* tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits)
  w1: Split memcpy() of struct cn_msg flexible array
  spmi: pmic-arb: increase SPMI transaction timeout delay
  spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes
  spmi: pmic-arb: correct duplicate APID to PPID mapping logic
  spmi: pmic-arb: add support to dispatch interrupt based on IRQ status
  spmi: pmic-arb: check apid against limits before calling irq handler
  spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq
  spmi: pmic-arb: handle spurious interrupt
  spmi: pmic-arb: add a print in cleanup_irq
  drivers: spmi: Directly use ida_alloc()/free()
  MAINTAINERS: add TI ECAP driver info
  counter: ti-ecap-capture: capture driver support for ECAP
  Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items
  dt-bindings: counter: add ti,am62-ecap-capture.yaml
  counter: Introduce the COUNTER_COMP_ARRAY component type
  counter: Consolidate Counter extension sysfs attribute creation
  counter: Introduce the Count capture component
  counter: 104-quad-8: Add Signal polarity component
  counter: Introduce the Signal polarity component
  counter: interrupt-cnt: Implement watch_validate callback
  ...

1 files changed, 125 insertions, 1 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index e81ba6f5e1c8..6ba34c0d9789 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -196,7 +196,7 @@ Description:
 		Raw capacitance measurement from channel Y. Units after
 		application of scale and offset are nanofarads.
 
-What:		/sys/.../iio:deviceX/in_capacitanceY-in_capacitanceZ_raw
+What:		/sys/.../iio:deviceX/in_capacitanceY-capacitanceZ_raw
 KernelVersion:	3.2
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -207,6 +207,25 @@ Description:
 		is required is a consistent labeling.  Units after application
 		of scale and offset are nanofarads.
 
+What:		/sys/.../iio:deviceX/in_capacitanceY-capacitanceZ_zeropoint
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		For differential channels, this an offset that is applied
+		equally to both inputs. As the reading is of the difference
+		between the two inputs, this should not be applied to the _raw
+		reading by userspace (unlike _offset) and unlike calibbias
+		it does not affect the differential value measured because
+		the effect of _zeropoint cancels out across the two inputs
+		that make up the differential pair. It's purpose is to bring
+		the individual signals, before the differential is measured,
+		within the measurement range of the device. The naming is
+		chosen because if the separate inputs that make the
+		differential pair are drawn on a graph in their
+		_raw  units, this is the value that the zero point on the
+		measurement axis represents. It is expressed with the
+		same scaling as _raw.
+
 What:		/sys/bus/iio/devices/iio:deviceX/in_temp_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_tempX_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_temp_x_raw
@@ -241,6 +260,15 @@ Description:
 		Has all of the equivalent parameters as per voltageY. Units
 		after application of scale and offset are m/s^2.
 
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_linear_x_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_linear_y_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_linear_z_raw
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		As per in_accel_X_raw attributes, but minus the
+		acceleration due to gravity.
+
 What:		/sys/bus/iio/devices/iio:deviceX/in_gravity_x_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_gravity_y_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_gravity_z_raw
@@ -2038,3 +2066,99 @@ Description:
 		Available range for the forced calibration value, expressed as:
 
 		- a range specified as "[min step max]"
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageX_sampling_frequency
+What:		/sys/bus/iio/devices/iio:deviceX/in_powerY_sampling_frequency
+What:		/sys/bus/iio/devices/iio:deviceX/in_currentZ_sampling_frequency
+KernelVersion:	5.20
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Some devices have separate controls of sampling frequency for
+		individual channels. If multiple channels are enabled in a scan,
+		then the sampling_frequency of the scan may be computed from the
+		per channel sampling frequencies.
+
+What:		/sys/.../events/in_accel_gesture_singletap_en
+What:		/sys/.../events/in_accel_gesture_doubletap_en
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Device generates an event on a single or double tap.
+
+What:		/sys/.../events/in_accel_gesture_singletap_value
+What:		/sys/.../events/in_accel_gesture_doubletap_value
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Specifies the threshold value that the device is comparing
+		against to generate the tap gesture event. The lower
+		threshold value increases the sensitivity of tap detection.
+		Units and the exact meaning of value are device-specific.
+
+What:		/sys/.../events/in_accel_gesture_tap_value_available
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Lists all available threshold values which can be used to
+		modify the sensitivity of the tap detection.
+
+What:		/sys/.../events/in_accel_gesture_singletap_reset_timeout
+What:		/sys/.../events/in_accel_gesture_doubletap_reset_timeout
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Specifies the timeout value in seconds for the tap detector
+		to not to look for another tap event after the event as
+		occurred. Basically the minimum quiet time between the two
+		single-tap's or two double-tap's.
+
+What:		/sys/.../events/in_accel_gesture_tap_reset_timeout_available
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Lists all available tap reset timeout values. Units in seconds.
+
+What:		/sys/.../events/in_accel_gesture_doubletap_tap2_min_delay
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Specifies the minimum quiet time in seconds between the two
+		taps of a double tap.
+
+What:		/sys/.../events/in_accel_gesture_doubletap_tap2_min_delay_available
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Lists all available delay values between two taps in the double
+		tap. Units in seconds.
+
+What:		/sys/.../events/in_accel_gesture_tap_maxtomin_time
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Specifies the maximum time difference allowed between upper
+		and lower peak of tap to consider it as the valid tap event.
+		Units in seconds.
+
+What:		/sys/.../events/in_accel_gesture_tap_maxtomin_time_available
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Lists all available time values between upper peak to lower
+		peak. Units in seconds.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_rot_yaw_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_rot_pitch_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_rot_roll_raw
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Raw (unscaled) euler angles readings. Units after
+		application of scale are deg.
+
+What:		/sys/bus/iio/devices/iio:deviceX/serialnumber
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		An example format is 16-bytes, 2-digits-per-byte, HEX-string
+		representing the sensor unique ID number.