arm64: dts: qcom: msm8996-*: Clean up QUP and UART names

QUP and UART names start from 1. There are 6 QUPs and 2 UARTs
per BLSP. Let's not further confuse programmers by stating
otherwise.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210228130831.203765-2-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

4 files changed, 29 insertions, 29 deletions

diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index 4212f5c6e8b6..6b3b6a4c0613 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -41,14 +41,14 @@
 
 / {
 	aliases {
-		serial0 = &blsp2_uart1;
-		serial1 = &blsp2_uart2;
-		serial2 = &blsp1_uart1;
-		i2c0	= &blsp1_i2c2;
+		serial0 = &blsp2_uart2;
+		serial1 = &blsp2_uart3;
+		serial2 = &blsp1_uart2;
+		i2c0	= &blsp1_i2c3;
 		i2c1	= &blsp2_i2c1;
-		i2c2	= &blsp2_i2c0;
-		spi0	= &blsp1_spi0;
-		spi1	= &blsp2_spi5;
+		i2c2	= &blsp2_i2c1;
+		spi0	= &blsp1_spi1;
+		spi1	= &blsp2_spi6;
 	};
 
 	chosen {
@@ -133,24 +133,24 @@
 	};
 };
 
-&blsp1_i2c2 {
+&blsp1_i2c3 {
 	/* On Low speed expansion */
 	label = "LS-I2C0";
 	status = "okay";
 };
 
-&blsp1_spi0 {
+&blsp1_spi1 {
 	/* On Low speed expansion */
 	label = "LS-SPI0";
 	status = "okay";
 };
 
-&blsp1_uart1 {
+&blsp1_uart2 {
 	label = "BT-UART";
 	status = "okay";
 	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&blsp1_uart1_default>;
-	pinctrl-1 = <&blsp1_uart1_sleep>;
+	pinctrl-0 = <&blsp1_uart2_default>;
+	pinctrl-1 = <&blsp1_uart2_sleep>;
 
 	bluetooth {
 		compatible = "qcom,qca6174-bt";
@@ -166,7 +166,7 @@
 	status = "okay";
 };
 
-&blsp2_i2c0 {
+&blsp2_i2c1 {
 	/* On High speed expansion */
 	label = "HS-I2C2";
 	status = "okay";
@@ -178,13 +178,13 @@
 	status = "okay";
 };
 
-&blsp2_spi5 {
+&blsp2_spi6 {
 	/* On High speed expansion */
 	label = "HS-SPI1";
 	status = "okay";
 };
 
-&blsp2_uart1 {
+&blsp2_uart2 {
 	label = "LS-UART1";
 	status = "okay";
 	pinctrl-names = "default", "sleep";
@@ -192,7 +192,7 @@
 	pinctrl-1 = <&blsp2_uart2_2pins_sleep>;
 };
 
-&blsp2_uart2 {
+&blsp2_uart3 {
 	label = "LS-UART0";
 	status = "disabled";
 	pinctrl-names = "default", "sleep";
@@ -428,7 +428,7 @@
 		};
 	};
 
-	blsp1_uart1_default: blsp1_uart1_default {
+	blsp1_uart2_default: blsp1_uart2_default {
 		mux {
 			pins = "gpio41", "gpio42", "gpio43", "gpio44";
 			function = "blsp_uart2";
@@ -441,7 +441,7 @@
 		};
 	};
 
-	blsp1_uart1_sleep: blsp1_uart1_sleep {
+	blsp1_uart2_sleep: blsp1_uart2_sleep {
 		mux {
 			pins = "gpio41", "gpio42", "gpio43", "gpio44";
 			function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts
index 9b55eae39e3e..4f67aa48633b 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts
+++ b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts
@@ -17,7 +17,7 @@
 	qcom,board-id = <0x00010018 0>;
 
 	aliases {
-		serial0 = &blsp2_uart1;
+		serial0 = &blsp2_uart2;
 	};
 
 	chosen {
@@ -81,7 +81,7 @@
 	};
 };
 
-&blsp2_uart1 {
+&blsp2_uart2 {
 	status = "okay";
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&blsp2_uart2_2pins_default>;
diff --git a/arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi
index 5f46a1427f1f..1e1514e9158c 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi
@@ -7,7 +7,7 @@
 
 / {
 	aliases {
-		serial0 = &blsp2_uart1;
+		serial0 = &blsp2_uart2;
 	};
 
 	chosen {
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 2f13d8e5d521..0e564f88d179 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -2326,7 +2326,7 @@
 			 bus-width = <4>;
 		 };
 
-		blsp1_uart1: serial@7570000 {
+		blsp1_uart2: serial@7570000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x07570000 0x1000>;
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
@@ -2336,7 +2336,7 @@
 			status = "disabled";
 		};
 
-		blsp1_spi0: spi@7575000 {
+		blsp1_spi1: spi@7575000 {
 			compatible = "qcom,spi-qup-v2.2.1";
 			reg = <0x07575000 0x600>;
 			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
@@ -2351,7 +2351,7 @@
 			status = "disabled";
 		};
 
-		blsp1_i2c2: i2c@7577000 {
+		blsp1_i2c3: i2c@7577000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x07577000 0x1000>;
 			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
@@ -2366,7 +2366,7 @@
 			status = "disabled";
 		};
 
-		blsp2_uart1: serial@75b0000 {
+		blsp2_uart2: serial@75b0000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x075b0000 0x1000>;
 			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
@@ -2376,7 +2376,7 @@
 			status = "disabled";
 		};
 
-		blsp2_uart2: serial@75b1000 {
+		blsp2_uart3: serial@75b1000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x075b1000 0x1000>;
 			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
@@ -2386,7 +2386,7 @@
 			status = "disabled";
 		};
 
-		blsp2_i2c0: i2c@75b5000 {
+		blsp2_i2c1: i2c@75b5000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x075b5000 0x1000>;
 			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
@@ -2401,7 +2401,7 @@
 			status = "disabled";
 		};
 
-		blsp2_i2c1: i2c@75b6000 {
+		blsp2_i2c2: i2c@75b6000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x075b6000 0x1000>;
 			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
@@ -2416,7 +2416,7 @@
 			status = "disabled";
 		};
 
-		blsp2_spi5: spi@75ba000{
+		blsp2_spi6: spi@75ba000{
 			compatible = "qcom,spi-qup-v2.2.1";
 			reg = <0x075ba000 0x600>;
 			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;