usb: gadget: Remove File-backed Storage Gadget (g_file_storage).

The File-backed Storage Gadget (g_file_storage) gadget has been replaced
with Mass Storage Gadget (g_mass_storage) which uses the composite
framework.  This commit removes g_file_storage (and most references to it).

Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Felipe Balbi <balbi@ti.com>

7 files changed, 12 insertions, 3696 deletions

diff --git a/Documentation/DocBook/gadget.tmpl b/Documentation/DocBook/gadget.tmpl
index 6ef2f0073e5a..4017f147ba2f 100644
--- a/Documentation/DocBook/gadget.tmpl
+++ b/Documentation/DocBook/gadget.tmpl
@@ -671,7 +671,7 @@ than a kernel driver.
 <para>There's a USB Mass Storage class driver, which provides
 a different solution for interoperability with systems such
 as MS-Windows and MacOS.
-That <emphasis>File-backed Storage</emphasis> driver uses a
+That <emphasis>Mass Storage</emphasis> driver uses a
 file or block device as backing store for a drive,
 like the <filename>loop</filename> driver.
 The USB host uses the BBB, CB, or CBI versions of the mass
diff --git a/Documentation/usb/mass-storage.txt b/Documentation/usb/mass-storage.txt
index e9b9334627bf..59063ad7a60d 100644
--- a/Documentation/usb/mass-storage.txt
+++ b/Documentation/usb/mass-storage.txt
@@ -20,9 +20,9 @@
 
   This document describes how to use the gadget from user space, its
   relation to mass storage function (or MSF) and different gadgets
-  using it, and how it differs from File Storage Gadget (or FSG).  It
-  will talk only briefly about how to use MSF within composite
-  gadgets.
+  using it, and how it differs from File Storage Gadget (or FSG)
+  (which is no longer included in Linux).  It will talk only briefly
+  about how to use MSF within composite gadgets.
 
 * Module parameters
 
@@ -198,16 +198,15 @@
   The Mass Storage Function and thus the Mass Storage Gadget has been
   based on the File Storage Gadget.  The difference between the two is
   that MSG is a composite gadget (ie. uses the composite framework)
-  while file storage gadget is a traditional gadget.  From userspace
+  while file storage gadget was a traditional gadget.  From userspace
   point of view this distinction does not really matter, but from
   kernel hacker's point of view, this means that (i) MSG does not
   duplicate code needed for handling basic USB protocol commands and
   (ii) MSF can be used in any other composite gadget.
 
-  Because of that, File Storage Gadget has been deprecated and
-  scheduled to be removed in Linux 3.8.  All users need to transition
-  to the Mass Storage Gadget by that time.  The two gadgets behave
-  mostly the same from the outside except:
+  Because of that, File Storage Gadget has been removed in Linux 3.8.
+  All users need to transition to the Mass Storage Gadget.  The two
+  gadgets behave mostly the same from the outside except:
 
   1. In FSG the “removable” and “cdrom” module parameters set the flag
      for all logical units whereas in MSG they accept a list of y/n
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index dfb51a45496c..63b5869e0940 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -721,31 +721,6 @@ config USB_FUNCTIONFS_GENERIC
 	  Include a configuration with the Function Filesystem alone with
 	  no Ethernet interface.
 
-config USB_FILE_STORAGE
-	tristate "File-backed Storage Gadget (DEPRECATED)"
-	depends on BLOCK
-	help
-	  The File-backed Storage Gadget acts as a USB Mass Storage
-	  disk drive.  As its storage repository it can use a regular
-	  file or a block device (in much the same way as the "loop"
-	  device driver), specified as a module parameter.
-
-	  Say "y" to link the driver statically, or "m" to build a
-	  dynamically linked module called "g_file_storage".
-
-	  NOTE: This driver is deprecated.  Its replacement is the
-	  Mass Storage Gadget.
-
-config USB_FILE_STORAGE_TEST
-	bool "File-backed Storage Gadget testing version"
-	depends on USB_FILE_STORAGE
-	default n
-	help
-	  Say "y" to generate the larger testing version of the
-	  File-backed Storage Gadget, useful for probing the
-	  behavior of USB Mass Storage hosts.  Not needed for
-	  normal operation.
-
 config USB_MASS_STORAGE
 	tristate "Mass Storage Gadget"
 	depends on BLOCK
@@ -756,8 +731,8 @@ config USB_MASS_STORAGE
 	  device (in much the same way as the "loop" device driver),
 	  specified as a module parameter or sysfs option.
 
-	  This driver is an updated replacement for the deprecated
-	  File-backed Storage Gadget (g_file_storage).
+	  This driver is a replacement for now removed File-backed
+	  Storage Gadget (g_file_storage).
 
 	  Say "y" to link the driver statically, or "m" to build
 	  a dynamically linked module called "g_mass_storage".
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 307be5fa824c..8b4acfd92aa3 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -44,7 +44,6 @@ g_ether-y			:= ether.o
 g_serial-y			:= serial.o
 g_midi-y			:= gmidi.o
 gadgetfs-y			:= inode.o
-g_file_storage-y		:= file_storage.o
 g_mass_storage-y		:= mass_storage.o
 g_printer-y			:= printer.o
 g_cdc-y				:= cdc2.o
@@ -62,7 +61,6 @@ obj-$(CONFIG_USB_AUDIO)		+= g_audio.o
 obj-$(CONFIG_USB_ETH)		+= g_ether.o
 obj-$(CONFIG_USB_GADGETFS)	+= gadgetfs.o
 obj-$(CONFIG_USB_FUNCTIONFS)	+= g_ffs.o
-obj-$(CONFIG_USB_FILE_STORAGE)	+= g_file_storage.o
 obj-$(CONFIG_USB_MASS_STORAGE)	+= g_mass_storage.o
 obj-$(CONFIG_USB_G_SERIAL)	+= g_serial.o
 obj-$(CONFIG_USB_G_PRINTER)	+= g_printer.o
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
deleted file mode 100644
index 3f7d640b6758..000000000000
--- a/drivers/usb/gadget/file_storage.c
+++ /dev/null
@@ -1,3656 +0,0 @@
-/*
- * file_storage.c -- File-backed USB Storage Gadget, for USB development
- *
- * Copyright (C) 2003-2008 Alan Stern
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions, and the following disclaimer,
- *    without modification.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. The names of the above-listed copyright holders may not be used
- *    to endorse or promote products derived from this software without
- *    specific prior written permission.
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
- * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
- * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-
-/*
- * The File-backed Storage Gadget acts as a USB Mass Storage device,
- * appearing to the host as a disk drive or as a CD-ROM drive.  In addition
- * to providing an example of a genuinely useful gadget driver for a USB
- * device, it also illustrates a technique of double-buffering for increased
- * throughput.  Last but not least, it gives an easy way to probe the
- * behavior of the Mass Storage drivers in a USB host.
- *
- * Backing storage is provided by a regular file or a block device, specified
- * by the "file" module parameter.  Access can be limited to read-only by
- * setting the optional "ro" module parameter.  (For CD-ROM emulation,
- * access is always read-only.)  The gadget will indicate that it has
- * removable media if the optional "removable" module parameter is set.
- *
- * The gadget supports the Control-Bulk (CB), Control-Bulk-Interrupt (CBI),
- * and Bulk-Only (also known as Bulk-Bulk-Bulk or BBB) transports, selected
- * by the optional "transport" module parameter.  It also supports the
- * following protocols: RBC (0x01), ATAPI or SFF-8020i (0x02), QIC-157 (0c03),
- * UFI (0x04), SFF-8070i (0x05), and transparent SCSI (0x06), selected by
- * the optional "protocol" module parameter.  In addition, the default
- * Vendor ID, Product ID, release number and serial number can be overridden.
- *
- * There is support for multiple logical units (LUNs), each of which has
- * its own backing file.  The number of LUNs can be set using the optional
- * "luns" module parameter (anywhere from 1 to 8), and the corresponding
- * files are specified using comma-separated lists for "file" and "ro".
- * The default number of LUNs is taken from the number of "file" elements;
- * it is 1 if "file" is not given.  If "removable" is not set then a backing
- * file must be specified for each LUN.  If it is set, then an unspecified
- * or empty backing filename means the LUN's medium is not loaded.  Ideally
- * each LUN would be settable independently as a disk drive or a CD-ROM
- * drive, but currently all LUNs have to be the same type.  The CD-ROM
- * emulation includes a single data track and no audio tracks; hence there
- * need be only one backing file per LUN.
- *
- * Requirements are modest; only a bulk-in and a bulk-out endpoint are
- * needed (an interrupt-out endpoint is also needed for CBI).  The memory
- * requirement amounts to two 16K buffers, size configurable by a parameter.
- * Support is included for both full-speed and high-speed operation.
- *
- * Note that the driver is slightly non-portable in that it assumes a
- * single memory/DMA buffer will be useable for bulk-in, bulk-out, and
- * interrupt-in endpoints.  With most device controllers this isn't an
- * issue, but there may be some with hardware restrictions that prevent
- * a buffer from being used by more than one endpoint.
- *
- * Module options:
- *
- *	file=filename[,filename...]
- *				Required if "removable" is not set, names of
- *					the files or block devices used for
- *					backing storage
- *	serial=HHHH...		Required serial number (string of hex chars)
- *	ro=b[,b...]		Default false, booleans for read-only access
- *	removable		Default false, boolean for removable media
- *	luns=N			Default N = number of filenames, number of
- *					LUNs to support
- *	nofua=b[,b...]		Default false, booleans for ignore FUA flag
- *					in SCSI WRITE(10,12) commands
- *	stall			Default determined according to the type of
- *					USB device controller (usually true),
- *					boolean to permit the driver to halt
- *					bulk endpoints
- *	cdrom			Default false, boolean for whether to emulate
- *					a CD-ROM drive
- *	transport=XXX		Default BBB, transport name (CB, CBI, or BBB)
- *	protocol=YYY		Default SCSI, protocol name (RBC, 8020 or
- *					ATAPI, QIC, UFI, 8070, or SCSI;
- *					also 1 - 6)
- *	vendor=0xVVVV		Default 0x0525 (NetChip), USB Vendor ID
- *	product=0xPPPP		Default 0xa4a5 (FSG), USB Product ID
- *	release=0xRRRR		Override the USB release number (bcdDevice)
- *	buflen=N		Default N=16384, buffer size used (will be
- *					rounded down to a multiple of
- *					PAGE_CACHE_SIZE)
- *
- * If CONFIG_USB_FILE_STORAGE_TEST is not set, only the "file", "serial", "ro",
- * "removable", "luns", "nofua", "stall", and "cdrom" options are available;
- * default values are used for everything else.
- *
- * The pathnames of the backing files and the ro settings are available in
- * the attribute files "file", "nofua", and "ro" in the lun<n> subdirectory of
- * the gadget's sysfs directory.  If the "removable" option is set, writing to
- * these files will simulate ejecting/loading the medium (writing an empty
- * line means eject) and adjusting a write-enable tab.  Changes to the ro
- * setting are not allowed when the medium is loaded or if CD-ROM emulation
- * is being used.
- *
- * This gadget driver is heavily based on "Gadget Zero" by David Brownell.
- * The driver's SCSI command interface was based on the "Information
- * technology - Small Computer System Interface - 2" document from
- * X3T9.2 Project 375D, Revision 10L, 7-SEP-93, available at
- * <http://www.t10.org/ftp/t10/drafts/s2/s2-r10l.pdf>.  The single exception
- * is opcode 0x23 (READ FORMAT CAPACITIES), which was based on the
- * "Universal Serial Bus Mass Storage Class UFI Command Specification"
- * document, Revision 1.0, December 14, 1998, available at
- * <http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf>.
- */
-
-
-/*
- *				Driver Design
- *
- * The FSG driver is fairly straightforward.  There is a main kernel
- * thread that handles most of the work.  Interrupt routines field
- * callbacks from the controller driver: bulk- and interrupt-request
- * completion notifications, endpoint-0 events, and disconnect events.
- * Completion events are passed to the main thread by wakeup calls.  Many
- * ep0 requests are handled at interrupt time, but SetInterface,
- * SetConfiguration, and device reset requests are forwarded to the
- * thread in the form of "exceptions" using SIGUSR1 signals (since they
- * should interrupt any ongoing file I/O operations).
- *
- * The thread's main routine implements the standard command/data/status
- * parts of a SCSI interaction.  It and its subroutines are full of tests
- * for pending signals/exceptions -- all this polling is necessary since
- * the kernel has no setjmp/longjmp equivalents.  (Maybe this is an
- * indication that the driver really wants to be running in userspace.)
- * An important point is that so long as the thread is alive it keeps an
- * open reference to the backing file.  This will prevent unmounting
- * the backing file's underlying filesystem and could cause problems
- * during system shutdown, for example.  To prevent such problems, the
- * thread catches INT, TERM, and KILL signals and converts them into
- * an EXIT exception.
- *
- * In normal operation the main thread is started during the gadget's
- * fsg_bind() callback and stopped during fsg_unbind().  But it can also
- * exit when it receives a signal, and there's no point leaving the
- * gadget running when the thread is dead.  So just before the thread
- * exits, it deregisters the gadget driver.  This makes things a little
- * tricky: The driver is deregistered at two places, and the exiting
- * thread can indirectly call fsg_unbind() which in turn can tell the
- * thread to exit.  The first problem is resolved through the use of the
- * REGISTERED atomic bitflag; the driver will only be deregistered once.
- * The second problem is resolved by having fsg_unbind() check
- * fsg->state; it won't try to stop the thread if the state is already
- * FSG_STATE_TERMINATED.
- *
- * To provide maximum throughput, the driver uses a circular pipeline of
- * buffer heads (struct fsg_buffhd).  In principle the pipeline can be
- * arbitrarily long; in practice the benefits don't justify having more
- * than 2 stages (i.e., double buffering).  But it helps to think of the
- * pipeline as being a long one.  Each buffer head contains a bulk-in and
- * a bulk-out request pointer (since the buffer can be used for both
- * output and input -- directions always are given from the host's
- * point of view) as well as a pointer to the buffer and various state
- * variables.
- *
- * Use of the pipeline follows a simple protocol.  There is a variable
- * (fsg->next_buffhd_to_fill) that points to the next buffer head to use.
- * At any time that buffer head may still be in use from an earlier
- * request, so each buffer head has a state variable indicating whether
- * it is EMPTY, FULL, or BUSY.  Typical use involves waiting for the
- * buffer head to be EMPTY, filling the buffer either by file I/O or by
- * USB I/O (during which the buffer head is BUSY), and marking the buffer
- * head FULL when the I/O is complete.  Then the buffer will be emptied
- * (again possibly by USB I/O, during which it is marked BUSY) and
- * finally marked EMPTY again (possibly by a completion routine).
- *
- * A module parameter tells the driver to avoid stalling the bulk
- * endpoints wherever the transport specification allows.  This is
- * necessary for some UDCs like the SuperH, which cannot reliably clear a
- * halt on a bulk endpoint.  However, under certain circumstances the
- * Bulk-only specification requires a stall.  In such cases the driver
- * will halt the endpoint and set a flag indicating that it should clear
- * the halt in software during the next device reset.  Hopefully this
- * will permit everything to work correctly.  Furthermore, although the
- * specification allows the bulk-out endpoint to halt when the host sends
- * too much data, implementing this would cause an unavoidable race.
- * The driver will always use the "no-stall" approach for OUT transfers.
- *
- * One subtle point concerns sending status-stage responses for ep0
- * requests.  Some of these requests, such as device reset, can involve
- * interrupting an ongoing file I/O operation, which might take an
- * arbitrarily long time.  During that delay the host might give up on
- * the original ep0 request and issue a new one.  When that happens the
- * driver should not notify the host about completion of the original
- * request, as the host will no longer be waiting for it.  So the driver
- * assigns to each ep0 request a unique tag, and it keeps track of the
- * tag value of the request associated with a long-running exception
- * (device-reset, interface-change, or configuration-change).  When the
- * exception handler is finished, the status-stage response is submitted
- * only if the current ep0 request tag is equal to the exception request
- * tag.  Thus only the most recently received ep0 request will get a
- * status-stage response.
- *
- * Warning: This driver source file is too long.  It ought to be split up
- * into a header file plus about 3 separate .c files, to handle the details
- * of the Gadget, USB Mass Storage, and SCSI protocols.
- */
-
-
-/* #define VERBOSE_DEBUG */
-/* #define DUMP_MSGS */
-
-
-#include <linux/blkdev.h>
-#include <linux/completion.h>
-#include <linux/dcache.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/fcntl.h>
-#include <linux/file.h>
-#include <linux/fs.h>
-#include <linux/kref.h>
-#include <linux/kthread.h>
-#include <linux/limits.h>
-#include <linux/module.h>
-#include <linux/rwsem.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/string.h>
-#include <linux/freezer.h>
-#include <linux/utsname.h>
-
-#include <linux/usb/composite.h>
-#include <linux/usb/ch9.h>
-#include <linux/usb/gadget.h>
-
-#include "gadget_chips.h"
-
-#define DRIVER_DESC		"File-backed Storage Gadget"
-#define DRIVER_NAME		"g_file_storage"
-#define DRIVER_VERSION		"1 September 2010"
-
-static       char fsg_string_manufacturer[64];
-static const char fsg_string_product[] = DRIVER_DESC;
-static const char fsg_string_config[] = "Self-powered";
-static const char fsg_string_interface[] = "Mass Storage";
-
-
-#include "storage_common.c"
-
-
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_AUTHOR("Alan Stern");
-MODULE_LICENSE("Dual BSD/GPL");
-
-/*
- * This driver assumes self-powered hardware and has no way for users to
- * trigger remote wakeup.  It uses autoconfiguration to select endpoints
- * and endpoint addresses.
- */
-
-
-/*-------------------------------------------------------------------------*/
-
-
-/* Encapsulate the module parameter settings */
-
-static struct {
-	char		*file[FSG_MAX_LUNS];
-	char		*serial;
-	bool		ro[FSG_MAX_LUNS];
-	bool		nofua[FSG_MAX_LUNS];
-	unsigned int	num_filenames;
-	unsigned int	num_ros;
-	unsigned int	num_nofuas;
-	unsigned int	nluns;
-
-	bool		removable;
-	bool		can_stall;
-	bool		cdrom;
-
-	char		*transport_parm;
-	char		*protocol_parm;
-	unsigned short	vendor;
-	unsigned short	product;
-	unsigned short	release;
-	unsigned int	buflen;
-
-	int		transport_type;
-	char		*transport_name;
-	int		protocol_type;
-	char		*protocol_name;
-
-} mod_data = {					// Default values
-	.transport_parm		= "BBB",
-	.protocol_parm		= "SCSI",
-	.removable		= 0,
-	.can_stall		= 1,
-	.cdrom			= 0,
-	.vendor			= FSG_VENDOR_ID,
-	.product		= FSG_PRODUCT_ID,
-	.release		= 0xffff,	// Use controller chip type
-	.buflen			= 16384,
-	};
-
-
-module_param_array_named(file, mod_data.file, charp, &mod_data.num_filenames,
-		S_IRUGO);
-MODULE_PARM_DESC(file, "names of backing files or devices");
-
-module_param_named(serial, mod_data.serial, charp, S_IRUGO);
-MODULE_PARM_DESC(serial, "USB serial number");
-
-module_param_array_named(ro, mod_data.ro, bool, &mod_data.num_ros, S_IRUGO);
-MODULE_PARM_DESC(ro, "true to force read-only");
-
-module_param_array_named(nofua, mod_data.nofua, bool, &mod_data.num_nofuas,
-		S_IRUGO);
-MODULE_PARM_DESC(nofua, "true to ignore SCSI WRITE(10,12) FUA bit");
-
-module_param_named(luns, mod_data.nluns, uint, S_IRUGO);
-MODULE_PARM_DESC(luns, "number of LUNs");
-
-module_param_named(removable, mod_data.removable, bool, S_IRUGO);
-MODULE_PARM_DESC(removable, "true to simulate removable media");
-
-module_param_named(stall, mod_data.can_stall, bool, S_IRUGO);
-MODULE_PARM_DESC(stall, "false to prevent bulk stalls");
-
-module_param_named(cdrom, mod_data.cdrom, bool, S_IRUGO);
-MODULE_PARM_DESC(cdrom, "true to emulate cdrom instead of disk");
-
-/* In the non-TEST version, only the module parameters listed above
- * are available. */
-#ifdef CONFIG_USB_FILE_STORAGE_TEST
-
-module_param_named(transport, mod_data.transport_parm, charp, S_IRUGO);
-MODULE_PARM_DESC(transport, "type of transport (BBB, CBI, or CB)");
-
-module_param_named(protocol, mod_data.protocol_parm, charp, S_IRUGO);
-MODULE_PARM_DESC(protocol, "type of protocol (RBC, 8020, QIC, UFI, "
-		"8070, or SCSI)");
-
-module_param_named(vendor, mod_data.vendor, ushort, S_IRUGO);
-MODULE_PARM_DESC(vendor, "USB Vendor ID");
-
-module_param_named(product, mod_data.product, ushort, S_IRUGO);
-MODULE_PARM_DESC(product, "USB Product ID");
-
-module_param_named(release, mod_data.release, ushort, S_IRUGO);
-MODULE_PARM_DESC(release, "USB release number");
-
-module_param_named(buflen, mod_data.buflen, uint, S_IRUGO);
-MODULE_PARM_DESC(buflen, "I/O buffer size");
-
-#endif /* CONFIG_USB_FILE_STORAGE_TEST */
-
-
-/*
- * These definitions will permit the compiler to avoid generating code for
- * parts of the driver that aren't used in the non-TEST version.  Even gcc
- * can recognize when a test of a constant expression yields a dead code
- * path.
- */
-
-#ifdef CONFIG_USB_FILE_STORAGE_TEST
-
-#define transport_is_bbb()	(mod_data.transport_type == USB_PR_BULK)
-#define transport_is_cbi()	(mod_data.transport_type == USB_PR_CBI)
-#define protocol_is_scsi()	(mod_data.protocol_type == USB_SC_SCSI)
-
-#else
-
-#define transport_is_bbb()	1
-#define transport_is_cbi()	0
-#define protocol_is_scsi()	1
-
-#endif /* CONFIG_USB_FILE_STORAGE_TEST */
-
-
-/*-------------------------------------------------------------------------*/
-
-
-struct fsg_dev {
-	/* lock protects: state, all the req_busy's, and cbbuf_cmnd */
-	spinlock_t		lock;
-	struct usb_gadget	*gadget;
-
-	/* filesem protects: backing files in use */
-	struct rw_semaphore	filesem;
-
-	/* reference counting: wait until all LUNs are released */
-	struct kref		ref;
-
-	struct usb_ep		*ep0;		// Handy copy of gadget->ep0
-	struct usb_request	*ep0req;	// For control responses
-	unsigned int		ep0_req_tag;
-	const char		*ep0req_name;
-
-	struct usb_request	*intreq;	// For interrupt responses
-	int			intreq_busy;
-	struct fsg_buffhd	*intr_buffhd;
-
-	unsigned int		bulk_out_maxpacket;
-	enum fsg_state		state;		// For exception handling
-	unsigned int		exception_req_tag;
-
-	u8			config, new_config;
-
-	unsigned int		running : 1;
-	unsigned int		bulk_in_enabled : 1;
-	unsigned int		bulk_out_enabled : 1;
-	unsigned int		intr_in_enabled : 1;
-	unsigned int		phase_error : 1;
-	unsigned int		short_packet_received : 1;
-	unsigned int		bad_lun_okay : 1;
-
-	unsigned long		atomic_bitflags;
-#define REGISTERED		0
-#define IGNORE_BULK_OUT		1
-#define SUSPENDED		2
-
-	struct usb_ep		*bulk_in;
-	struct usb_ep		*bulk_out;
-	struct usb_ep		*intr_in;
-
-	struct fsg_buffhd	*next_buffhd_to_fill;
-	struct fsg_buffhd	*next_buffhd_to_drain;
-
-	int			thread_wakeup_needed;
-	struct completion	thread_notifier;
-	struct task_struct	*thread_task;
-
-	int			cmnd_size;
-	u8			cmnd[MAX_COMMAND_SIZE];
-	enum data_direction	data_dir;
-	u32			data_size;
-	u32			data_size_from_cmnd;
-	u32			tag;
-	unsigned int		lun;
-	u32			residue;
-	u32			usb_amount_left;
-
-	/* The CB protocol offers no way for a host to know when a command
-	 * has completed.  As a result the next command may arrive early,
-	 * and we will still have to handle it.  For that reason we need
-	 * a buffer to store new commands when using CB (or CBI, which
-	 * does not oblige a host to wait for command completion either). */
-	int			cbbuf_cmnd_size;
-	u8			cbbuf_cmnd[MAX_COMMAND_SIZE];
-
-	unsigned int		nluns;
-	struct fsg_lun		*luns;
-	struct fsg_lun		*curlun;
-	/* Must be the last entry */
-	struct fsg_buffhd	buffhds[];
-};
-
-typedef void (*fsg_routine_t)(struct fsg_dev *);
-
-static int exception_in_progress(struct fsg_dev *fsg)
-{
-	return (fsg->state > FSG_STATE_IDLE);
-}
-
-/* Make bulk-out requests be divisible by the maxpacket size */
-static void set_bulk_out_req_length(struct fsg_dev *fsg,
-		struct fsg_buffhd *bh, unsigned int length)
-{
-	unsigned int	rem;
-
-	bh->bulk_out_intended_length = length;
-	rem = length % fsg->bulk_out_maxpacket;
-	if (rem > 0)
-		length += fsg->bulk_out_maxpacket - rem;
-	bh->outreq->length = length;
-}
-
-static struct fsg_dev			*the_fsg;
-static struct usb_gadget_driver		fsg_driver;
-
-
-/*-------------------------------------------------------------------------*/
-
-static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep)
-{
-	const char	*name;
-
-	if (ep == fsg->bulk_in)
-		name = "bulk-in";
-	else if (ep == fsg->bulk_out)
-		name = "bulk-out";
-	else
-		name = ep->name;
-	DBG(fsg, "%s set halt\n", name);
-	return usb_ep_set_halt(ep);
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * DESCRIPTORS ... most are static, but strings and (full) configuration
- * descriptors are built on demand.  Also the (static) config and interface
- * descriptors are adjusted during fsg_bind().
- */
-
-/* There is only one configuration. */
-#define	CONFIG_VALUE		1
-
-static struct usb_device_descriptor
-device_desc = {
-	.bLength =		sizeof device_desc,
-	.bDescriptorType =	USB_DT_DEVICE,
-
-	.bcdUSB =		cpu_to_le16(0x0200),
-	.bDeviceClass =		USB_CLASS_PER_INTERFACE,
-
-	/* The next three values can be overridden by module parameters */
-	.idVendor =		cpu_to_le16(FSG_VENDOR_ID),
-	.idProduct =		cpu_to_le16(FSG_PRODUCT_ID),
-	.bcdDevice =		cpu_to_le16(0xffff),
-
-	.iManufacturer =	FSG_STRING_MANUFACTURER,
-	.iProduct =		FSG_STRING_PRODUCT,
-	.iSerialNumber =	FSG_STRING_SERIAL,
-	.bNumConfigurations =	1,
-};
-
-static struct usb_config_descriptor
-config_desc = {
-	.bLength =		sizeof config_desc,
-	.bDescriptorType =	USB_DT_CONFIG,
-
-	/* wTotalLength computed by usb_gadget_config_buf() */
-	.bNumInterfaces =	1,
-	.bConfigurationValue =	CONFIG_VALUE,
-	.iConfiguration =	FSG_STRING_CONFIG,
-	.bmAttributes =		USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
-	.bMaxPower =		CONFIG_USB_GADGET_VBUS_DRAW / 2,
-};
-
-
-static struct usb_qualifier_descriptor
-dev_qualifier = {
-	.bLength =		sizeof dev_qualifier,
-	.bDescriptorType =	USB_DT_DEVICE_QUALIFIER,
-
-	.bcdUSB =		cpu_to_le16(0x0200),
-	.bDeviceClass =		USB_CLASS_PER_INTERFACE,
-
-	.bNumConfigurations =	1,
-};
-
-static int populate_bos(struct fsg_dev *fsg, u8 *buf)
-{
-	memcpy(buf, &fsg_bos_desc, USB_DT_BOS_SIZE);
-	buf += USB_DT_BOS_SIZE;
-
-	memcpy(buf, &fsg_ext_cap_desc, USB_DT_USB_EXT_CAP_SIZE);
-	buf += USB_DT_USB_EXT_CAP_SIZE;
-
-	memcpy(buf, &fsg_ss_cap_desc, USB_DT_USB_SS_CAP_SIZE);
-
-	return USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE
-		+ USB_DT_USB_EXT_CAP_SIZE;
-}
-
-/*
- * Config descriptors must agree with the code that sets configurations
- * and with code managing interfaces and their altsettings.  They must
- * also handle different speeds and other-speed requests.
- */
-static int populate_config_buf(struct usb_gadget *gadget,
-		u8 *buf, u8 type, unsigned index)
-{
-	enum usb_device_speed			speed = gadget->speed;
-	int					len;
-	const struct usb_descriptor_header	**function;
-
-	if (index > 0)
-		return -EINVAL;
-
-	if (gadget_is_dualspeed(gadget) && type == USB_DT_OTHER_SPEED_CONFIG)
-		speed = (USB_SPEED_FULL + USB_SPEED_HIGH) - speed;
-	function = gadget_is_dualspeed(gadget) && speed == USB_SPEED_HIGH
-		? (const struct usb_descriptor_header **)fsg_hs_function
-		: (const struct usb_descriptor_header **)fsg_fs_function;
-
-	/* for now, don't advertise srp-only devices */
-	if (!gadget_is_otg(gadget))
-		function++;
-
-	len = usb_gadget_config_buf(&config_desc, buf, EP0_BUFSIZE, function);
-	((struct usb_config_descriptor *) buf)->bDescriptorType = type;
-	return len;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* These routines may be called in process context or in_irq */
-
-/* Caller must hold fsg->lock */
-static void wakeup_thread(struct fsg_dev *fsg)
-{
-	/* Tell the main thread that something has happened */
-	fsg->thread_wakeup_needed = 1;
-	if (fsg->thread_task)
-		wake_up_process(fsg->thread_task);
-}
-
-
-static void raise_exception(struct fsg_dev *fsg, enum fsg_state new_state)
-{
-	unsigned long		flags;
-
-	/* Do nothing if a higher-priority exception is already in progress.
-	 * If a lower-or-equal priority exception is in progress, preempt it
-	 * and notify the main thread by sending it a signal. */
-	spin_lock_irqsave(&fsg->lock, flags);
-	if (fsg->state <= new_state) {
-		fsg->exception_req_tag = fsg->ep0_req_tag;
-		fsg->state = new_state;
-		if (fsg->thread_task)
-			send_sig_info(SIGUSR1, SEND_SIG_FORCED,
-					fsg->thread_task);
-	}
-	spin_unlock_irqrestore(&fsg->lock, flags);
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* The disconnect callback and ep0 routines.  These always run in_irq,
- * except that ep0_queue() is called in the main thread to acknowledge
- * completion of various requests: set config, set interface, and
- * Bulk-only device reset. */
-
-static void fsg_disconnect(struct usb_gadget *gadget)
-{
-	struct fsg_dev		*fsg = get_gadget_data(gadget);
-
-	DBG(fsg, "disconnect or port reset\n");
-	raise_exception(fsg, FSG_STATE_DISCONNECT);
-}
-
-
-static int ep0_queue(struct fsg_dev *fsg)
-{
-	int	rc;
-
-	rc = usb_ep_queue(fsg->ep0, fsg->ep0req, GFP_ATOMIC);
-	if (rc != 0 && rc != -ESHUTDOWN) {
-
-		/* We can't do much more than wait for a reset */
-		WARNING(fsg, "error in submission: %s --> %d\n",
-				fsg->ep0->name, rc);
-	}
-	return rc;
-}
-
-static void ep0_complete(struct usb_ep *ep, struct usb_request *req)
-{
-	struct fsg_dev		*fsg = ep->driver_data;
-
-	if (req->actual > 0)
-		dump_msg(fsg, fsg->ep0req_name, req->buf, req->actual);
-	if (req->status || req->actual != req->length)
-		DBG(fsg, "%s --> %d, %u/%u\n", __func__,
-				req->status, req->actual, req->length);
-	if (req->status == -ECONNRESET)		// Request was cancelled
-		usb_ep_fifo_flush(ep);
-
-	if (req->status == 0 && req->context)
-		((fsg_routine_t) (req->context))(fsg);
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* Bulk and interrupt endpoint completion handlers.
- * These always run in_irq. */
-
-static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req)
-{
-	struct fsg_dev		*fsg = ep->driver_data;
-	struct fsg_buffhd	*bh = req->context;
-
-	if (req->status || req->actual != req->length)
-		DBG(fsg, "%s --> %d, %u/%u\n", __func__,
-				req->status, req->actual, req->length);
-	if (req->status == -ECONNRESET)		// Request was cancelled
-		usb_ep_fifo_flush(ep);
-
-	/* Hold the lock while we update the request and buffer states */
-	smp_wmb();
-	spin_lock(&fsg->lock);
-	bh->inreq_busy = 0;
-	bh->state = BUF_STATE_EMPTY;
-	wakeup_thread(fsg);
-	spin_unlock(&fsg->lock);
-}
-
-static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req)
-{
-	struct fsg_dev		*fsg = ep->driver_data;
-	struct fsg_buffhd	*bh = req->context;
-
-	dump_msg(fsg, "bulk-out", req->buf, req->actual);
-	if (req->status || req->actual != bh->bulk_out_intended_length)
-		DBG(fsg, "%s --> %d, %u/%u\n", __func__,
-				req->status, req->actual,
-				bh->bulk_out_intended_length);
-	if (req->status == -ECONNRESET)		// Request was cancelled
-		usb_ep_fifo_flush(ep);
-
-	/* Hold the lock while we update the request and buffer states */
-	smp_wmb();
-	spin_lock(&fsg->lock);
-	bh->outreq_busy = 0;
-	bh->state = BUF_STATE_FULL;
-	wakeup_thread(fsg);
-	spin_unlock(&fsg->lock);
-}
-
-
-#ifdef CONFIG_USB_FILE_STORAGE_TEST
-static void intr_in_complete(struct usb_ep *ep, struct usb_request *req)
-{
-	struct fsg_dev		*fsg = ep->driver_data;
-	struct fsg_buffhd	*bh = req->context;
-
-	if (req->status || req->actual != req->length)
-		DBG(fsg, "%s --> %d, %u/%u\n", __func__,
-				req->status, req->actual, req->length);
-	if (req->status == -ECONNRESET)		// Request was cancelled
-		usb_ep_fifo_flush(ep);
-
-	/* Hold the lock while we update the request and buffer states */
-	smp_wmb();
-	spin_lock(&fsg->lock);
-	fsg->intreq_busy = 0;
-	bh->state = BUF_STATE_EMPTY;
-	wakeup_thread(fsg);
-	spin_unlock(&fsg->lock);
-}
-
-#else
-static void intr_in_complete(struct usb_ep *ep, struct usb_request *req)
-{}
-#endif /* CONFIG_USB_FILE_STORAGE_TEST */
-
-
-/*-------------------------------------------------------------------------*/
-
-/* Ep0 class-specific handlers.  These always run in_irq. */
-
-#ifdef CONFIG_USB_FILE_STORAGE_TEST
-static void received_cbi_adsc(struct fsg_dev *fsg, struct fsg_buffhd *bh)
-{
-	struct usb_request	*req = fsg->ep0req;
-	static u8		cbi_reset_cmnd[6] = {
-			SEND_DIAGNOSTIC, 4, 0xff, 0xff, 0xff, 0xff};
-
-	/* Error in command transfer? */
-	if (req->status || req->length != req->actual ||
-			req->actual < 6 || req->actual > MAX_COMMAND_SIZE) {
-
-		/* Not all controllers allow a protocol stall after
-		 * receiving control-out data, but we'll try anyway. */
-		fsg_set_halt(fsg, fsg->ep0);
-		return;			// Wait for reset
-	}
-
-	/* Is it the special reset command? */
-	if (req->actual >= sizeof cbi_reset_cmnd &&
-			memcmp(req->buf, cbi_reset_cmnd,
-				sizeof cbi_reset_cmnd) == 0) {
-
-		/* Raise an exception to stop the current operation
-		 * and reinitialize our state. */
-		DBG(fsg, "cbi reset request\n");
-		raise_exception(fsg, FSG_STATE_RESET);
-		return;
-	}
-
-	VDBG(fsg, "CB[I] accept device-specific command\n");
-	spin_lock(&fsg->lock);
-
-	/* Save the command for later */
-	if (fsg->cbbuf_cmnd_size)
-		WARNING(fsg, "CB[I] overwriting previous command\n");
-	fsg->cbbuf_cmnd_size = req->actual;
-	memcpy(fsg->cbbuf_cmnd, req->buf, fsg->cbbuf_cmnd_size);
-
-	wakeup_thread(fsg);
-	spin_unlock(&fsg->lock);
-}
-
-#else
-static void received_cbi_adsc(struct fsg_dev *fsg, struct fsg_buffhd *bh)
-{}
-#endif /* CONFIG_USB_FILE_STORAGE_TEST */
-
-
-static int class_setup_req(struct fsg_dev *fsg,
-		const struct usb_ctrlrequest *ctrl)
-{
-	struct usb_request	*req = fsg->ep0req;
-	int			value = -EOPNOTSUPP;
-	u16			w_index = le16_to_cpu(ctrl->wIndex);
-	u16                     w_value = le16_to_cpu(ctrl->wValue);
-	u16			w_length = le16_to_cpu(ctrl->wLength);
-
-	if (!fsg->config)
-		return value;
-
-	/* Handle Bulk-only class-specific requests */
-	if (transport_is_bbb()) {
-		switch (ctrl->bRequest) {
-
-		case US_BULK_RESET_REQUEST:
-			if (ctrl->bRequestType != (USB_DIR_OUT |
-					USB_TYPE_CLASS | USB_RECIP_INTERFACE))
-				break;
-			if (w_index != 0 || w_value != 0 || w_length != 0) {
-				value = -EDOM;
-				break;
-			}
-
-			/* Raise an exception to stop the current operation
-			 * and reinitialize our state. */
-			DBG(fsg, "bulk reset request\n");
-			raise_exception(fsg, FSG_STATE_RESET);
-			value = DELAYED_STATUS;
-			break;
-
-		case US_BULK_GET_MAX_LUN:
-			if (ctrl->bRequestType != (USB_DIR_IN |
-					USB_TYPE_CLASS | USB_RECIP_INTERFACE))
-				break;
-			if (w_index != 0 || w_value != 0 || w_length != 1) {
-				value = -EDOM;
-				break;
-			}
-			VDBG(fsg, "get max LUN\n");
-			*(u8 *) req->buf = fsg->nluns - 1;
-			value = 1;
-			break;
-		}
-	}
-
-	/* Handle CBI class-specific requests */
-	else {
-		switch (ctrl->bRequest) {
-
-		case USB_CBI_ADSC_REQUEST:
-			if (ctrl->bRequestType != (USB_DIR_OUT |
-					USB_TYPE_CLASS | USB_RECIP_INTERFACE))
-				break;
-			if (w_index != 0 || w_value != 0) {
-				value = -EDOM;
-				break;
-			}
-			if (w_length > MAX_COMMAND_SIZE) {
-				value = -EOVERFLOW;
-				break;
-			}
-			value = w_length;
-			fsg->ep0req->context = received_cbi_adsc;
-			break;
-		}
-	}
-
-	if (value == -EOPNOTSUPP)
-		VDBG(fsg,
-			"unknown class-specific control req "
-			"%02x.%02x v%04x i%04x l%u\n",
-			ctrl->bRequestType, ctrl->bRequest,
-			le16_to_cpu(ctrl->wValue), w_index, w_length);
-	return value;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* Ep0 standard request handlers.  These always run in_irq. */
-
-static int standard_setup_req(struct fsg_dev *fsg,
-		const struct usb_ctrlrequest *ctrl)
-{
-	struct usb_request	*req = fsg->ep0req;
-	int			value = -EOPNOTSUPP;
-	u16			w_index = le16_to_cpu(ctrl->wIndex);
-	u16			w_value = le16_to_cpu(ctrl->wValue);
-
-	/* Usually this just stores reply data in the pre-allocated ep0 buffer,
-	 * but config change events will also reconfigure hardware. */
-	switch (ctrl->bRequest) {
-
-	case USB_REQ_GET_DESCRIPTOR:
-		if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD |
-				USB_RECIP_DEVICE))
-			break;
-		switch (w_value >> 8) {
-
-		case USB_DT_DEVICE:
-			VDBG(fsg, "get device descriptor\n");
-			device_desc.bMaxPacketSize0 = fsg->ep0->maxpacket;
-			value = sizeof device_desc;
-			memcpy(req->buf, &device_desc, value);
-			break;
-		case USB_DT_DEVICE_QUALIFIER:
-			VDBG(fsg, "get device qualifier\n");
-			if (!gadget_is_dualspeed(fsg->gadget) ||
-					fsg->gadget->speed == USB_SPEED_SUPER)
-				break;
-			/*
-			 * Assume ep0 uses the same maxpacket value for both
-			 * speeds
-			 */
-			dev_qualifier.bMaxPacketSize0 = fsg->ep0->maxpacket;
-			value = sizeof dev_qualifier;
-			memcpy(req->buf, &dev_qualifier, value);
-			break;
-
-		case USB_DT_OTHER_SPEED_CONFIG:
-			VDBG(fsg, "get other-speed config descriptor\n");
-			if (!gadget_is_dualspeed(fsg->gadget) ||
-					fsg->gadget->speed == USB_SPEED_SUPER)
-				break;
-			goto get_config;
-		case USB_DT_CONFIG:
-			VDBG(fsg, "get configuration descriptor\n");
-get_config:
-			value = populate_config_buf(fsg->gadget,
-					req->buf,
-					w_value >> 8,
-					w_value & 0xff);
-			break;
-
-		case USB_DT_STRING:
-			VDBG(fsg, "get string descriptor\n");
-
-			/* wIndex == language code */
-			value = usb_gadget_get_string(&fsg_stringtab,
-					w_value & 0xff, req->buf);
-			break;
-
-		case USB_DT_BOS:
-			VDBG(fsg, "get bos descriptor\n");
-
-			if (gadget_is_superspeed(fsg->gadget))
-				value = populate_bos(fsg, req->buf);
-			break;
-		}
-
-		break;
-
-	/* One config, two speeds */
-	case USB_REQ_SET_CONFIGURATION:
-		if (ctrl->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD |
-				USB_RECIP_DEVICE))
-			break;
-		VDBG(fsg, "set configuration\n");
-		if (w_value == CONFIG_VALUE || w_value == 0) {
-			fsg->new_config = w_value;
-
-			/* Raise an exception to wipe out previous transaction
-			 * state (queued bufs, etc) and set the new config. */
-			raise_exception(fsg, FSG_STATE_CONFIG_CHANGE);
-			value = DELAYED_STATUS;
-		}
-		break;
-	case USB_REQ_GET_CONFIGURATION:
-		if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD |
-				USB_RECIP_DEVICE))
-			break;
-		VDBG(fsg, "get configuration\n");
-		*(u8 *) req->buf = fsg->config;
-		value = 1;
-		break;
-
-	case USB_REQ_SET_INTERFACE:
-		if (ctrl->bRequestType != (USB_DIR_OUT| USB_TYPE_STANDARD |
-				USB_RECIP_INTERFACE))
-			break;
-		if (fsg->config && w_index == 0) {
-
-			/* Raise an exception to wipe out previous transaction
-			 * state (queued bufs, etc) and install the new
-			 * interface altsetting. */
-			raise_exception(fsg, FSG_STATE_INTERFACE_CHANGE);
-			value = DELAYED_STATUS;
-		}
-		break;
-	case USB_REQ_GET_INTERFACE:
-		if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD |
-				USB_RECIP_INTERFACE))
-			break;
-		if (!fsg->config)
-			break;
-		if (w_index != 0) {
-			value = -EDOM;
-			break;
-		}
-		VDBG(fsg, "get interface\n");
-		*(u8 *) req->buf = 0;
-		value = 1;
-		break;
-
-	default:
-		VDBG(fsg,
-			"unknown control req %02x.%02x v%04x i%04x l%u\n",
-			ctrl->bRequestType, ctrl->bRequest,
-			w_value, w_index, le16_to_cpu(ctrl->wLength));
-	}
-
-	return value;
-}
-
-
-static int fsg_setup(struct usb_gadget *gadget,
-		const struct usb_ctrlrequest *ctrl)
-{
-	struct fsg_dev		*fsg = get_gadget_data(gadget);
-	int			rc;
-	int			w_length = le16_to_cpu(ctrl->wLength);
-
-	++fsg->ep0_req_tag;		// Record arrival of a new request
-	fsg->ep0req->context = NULL;
-	fsg->ep0req->length = 0;
-	dump_msg(fsg, "ep0-setup", (u8 *) ctrl, sizeof(*ctrl));
-
-	if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_CLASS)
-		rc = class_setup_req(fsg, ctrl);
-	else
-		rc = standard_setup_req(fsg, ctrl);
-
-	/* Respond with data/status or defer until later? */
-	if (rc >= 0 && rc != DELAYED_STATUS) {
-		rc = min(rc, w_length);
-		fsg->ep0req->length = rc;
-		fsg->ep0req->zero = rc < w_length;
-		fsg->ep0req_name = (ctrl->bRequestType & USB_DIR_IN ?
-				"ep0-in" : "ep0-out");
-		rc = ep0_queue(fsg);
-	}
-
-	/* Device either stalls (rc < 0) or reports success */
-	return rc;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* All the following routines run in process context */
-
-
-/* Use this for bulk or interrupt transfers, not ep0 */
-static void start_transfer(struct fsg_dev *fsg, struct usb_ep *ep,
-		struct usb_request *req, int *pbusy,
-		enum fsg_buffer_state *state)
-{
-	int	rc;
-
-	if (ep == fsg->bulk_in)
-		dump_msg(fsg, "bulk-in", req->buf, req->length);
-	else if (ep == fsg->intr_in)
-		dump_msg(fsg, "intr-in", req->buf, req->length);
-
-	spin_lock_irq(&fsg->lock);
-	*pbusy = 1;
-	*state = BUF_STATE_BUSY;
-	spin_unlock_irq(&fsg->lock);
-	rc = usb_ep_queue(ep, req, GFP_KERNEL);
-	if (rc != 0) {
-		*pbusy = 0;
-		*state = BUF_STATE_EMPTY;
-
-		/* We can't do much more than wait for a reset */
-
-		/* Note: currently the net2280 driver fails zero-length
-		 * submissions if DMA is enabled. */
-		if (rc != -ESHUTDOWN && !(rc == -EOPNOTSUPP &&
-						req->length == 0))
-			WARNING(fsg, "error in submission: %s --> %d\n",
-					ep->name, rc);
-	}
-}
-
-
-static int sleep_thread(struct fsg_dev *fsg)
-{
-	int	rc = 0;
-
-	/* Wait until a signal arrives or we are woken up */
-	for (;;) {
-		try_to_freeze();
-		set_current_state(TASK_INTERRUPTIBLE);
-		if (signal_pending(current)) {
-			rc = -EINTR;
-			break;
-		}
-		if (fsg->thread_wakeup_needed)
-			break;
-		schedule();
-	}
-	__set_current_state(TASK_RUNNING);
-	fsg->thread_wakeup_needed = 0;
-	return rc;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-static int do_read(struct fsg_dev *fsg)
-{
-	struct fsg_lun		*curlun = fsg->curlun;
-	u32			lba;
-	struct fsg_buffhd	*bh;
-	int			rc;
-	u32			amount_left;
-	loff_t			file_offset, file_offset_tmp;
-	unsigned int		amount;
-	ssize_t			nread;
-
-	/* Get the starting Logical Block Address and check that it's
-	 * not too big */
-	if (fsg->cmnd[0] == READ_6)
-		lba = get_unaligned_be24(&fsg->cmnd[1]);
-	else {
-		lba = get_unaligned_be32(&fsg->cmnd[2]);
-
-		/* We allow DPO (Disable Page Out = don't save data in the
-		 * cache) and FUA (Force Unit Access = don't read from the
-		 * cache), but we don't implement them. */
-		if ((fsg->cmnd[1] & ~0x18) != 0) {
-			curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
-			return -EINVAL;
-		}
-	}
-	if (lba >= curlun->num_sectors) {
-		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
-		return -EINVAL;
-	}
-	file_offset = ((loff_t) lba) << curlun->blkbits;
-
-	/* Carry out the file reads */
-	amount_left = fsg->data_size_from_cmnd;
-	if (unlikely(amount_left == 0))
-		return -EIO;		// No default reply
-
-	for (;;) {
-
-		/* Figure out how much we need to read:
-		 * Try to read the remaining amount.
-		 * But don't read more than the buffer size.
-		 * And don't try to read past the end of the file.
-		 */
-		amount = min((unsigned int) amount_left, mod_data.buflen);
-		amount = min((loff_t) amount,
-				curlun->file_length - file_offset);
-
-		/* Wait for the next buffer to become available */
-		bh = fsg->next_buffhd_to_fill;
-		while (bh->state != BUF_STATE_EMPTY) {
-			rc = sleep_thread(fsg);
-			if (rc)
-				return rc;
-		}
-
-		/* If we were asked to read past the end of file,
-		 * end with an empty buffer. */
-		if (amount == 0) {
-			curlun->sense_data =
-					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
-			curlun->sense_data_info = file_offset >> curlun->blkbits;
-			curlun->info_valid = 1;
-			bh->inreq->length = 0;
-			bh->state = BUF_STATE_FULL;
-			break;
-		}
-
-		/* Perform the read */
-		file_offset_tmp = file_offset;
-		nread = vfs_read(curlun->filp,
-				(char __user *) bh->buf,
-				amount, &file_offset_tmp);
-		VLDBG(curlun, "file read %u @ %llu -> %d\n", amount,
-				(unsigned long long) file_offset,
-				(int) nread);
-		if (signal_pending(current))
-			return -EINTR;
-
-		if (nread < 0) {
-			LDBG(curlun, "error in file read: %d\n",
-					(int) nread);
-			nread = 0;
-		} else if (nread < amount) {
-			LDBG(curlun, "partial file read: %d/%u\n",
-					(int) nread, amount);
-			nread = round_down(nread, curlun->blksize);
-		}
-		file_offset  += nread;
-		amount_left  -= nread;
-		fsg->residue -= nread;
-
-		/* Except at the end of the transfer, nread will be
-		 * equal to the buffer size, which is divisible by the
-		 * bulk-in maxpacket size.
-		 */
-		bh->inreq->length = nread;
-		bh->state = BUF_STATE_FULL;
-
-		/* If an error occurred, report it and its position */
-		if (nread < amount) {
-			curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
-			curlun->sense_data_info = file_offset >> curlun->blkbits;
-			curlun->info_valid = 1;
-			break;
-		}
-
-		if (amount_left == 0)
-			break;		// No more left to read
-
-		/* Send this buffer and go read some more */
-		bh->inreq->zero = 0;
-		start_transfer(fsg, fsg->bulk_in, bh->inreq,
-				&bh->inreq_busy, &bh->state);
-		fsg->next_buffhd_to_fill = bh->next;
-	}
-
-	return -EIO;		// No default reply
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-static int do_write(struct fsg_dev *fsg)
-{
-	struct fsg_lun		*curlun = fsg->curlun;
-	u32			lba;
-	struct fsg_buffhd	*bh;
-	int			get_some_more;
-	u32			amount_left_to_req, amount_left_to_write;
-	loff_t			usb_offset, file_offset, file_offset_tmp;
-	unsigned int		amount;
-	ssize_t			nwritten;
-	int			rc;
-
-	if (curlun->ro) {
-		curlun->sense_data = SS_WRITE_PROTECTED;
-		return -EINVAL;
-	}
-	spin_lock(&curlun->filp->f_lock);
-	curlun->filp->f_flags &= ~O_SYNC;	// Default is not to wait
-	spin_unlock(&curlun->filp->f_lock);
-
-	/* Get the starting Logical Block Address and check that it's
-	 * not too big */
-	if (fsg->cmnd[0] == WRITE_6)
-		lba = get_unaligned_be24(&fsg->cmnd[1]);
-	else {
-		lba = get_unaligned_be32(&fsg->cmnd[2]);
-
-		/* We allow DPO (Disable Page Out = don't save data in the
-		 * cache) and FUA (Force Unit Access = write directly to the
-		 * medium).  We don't implement DPO; we implement FUA by
-		 * performing synchronous output. */
-		if ((fsg->cmnd[1] & ~0x18) != 0) {
-			curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
-			return -EINVAL;
-		}
-		/* FUA */
-		if (!curlun->nofua && (fsg->cmnd[1] & 0x08)) {
-			spin_lock(&curlun->filp->f_lock);
-			curlun->filp->f_flags |= O_DSYNC;
-			spin_unlock(&curlun->filp->f_lock);
-		}
-	}
-	if (lba >= curlun->num_sectors) {
-		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
-		return -EINVAL;
-	}
-
-	/* Carry out the file writes */
-	get_some_more = 1;
-	file_offset = usb_offset = ((loff_t) lba) << curlun->blkbits;
-	amount_left_to_req = amount_left_to_write = fsg->data_size_from_cmnd;
-
-	while (amount_left_to_write > 0) {
-
-		/* Queue a request for more data from the host */
-		bh = fsg->next_buffhd_to_fill;
-		if (bh->state == BUF_STATE_EMPTY && get_some_more) {
-
-			/* Figure out how much we want to get:
-			 * Try to get the remaining amount,
-			 * but not more than the buffer size.
-			 */
-			amount = min(amount_left_to_req, mod_data.buflen);
-
-			/* Beyond the end of the backing file? */
-			if (usb_offset >= curlun->file_length) {
-				get_some_more = 0;
-				curlun->sense_data =
-					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
-				curlun->sense_data_info = usb_offset >> curlun->blkbits;
-				curlun->info_valid = 1;
-				continue;
-			}
-
-			/* Get the next buffer */
-			usb_offset += amount;
-			fsg->usb_amount_left -= amount;
-			amount_left_to_req -= amount;
-			if (amount_left_to_req == 0)
-				get_some_more = 0;
-
-			/* Except at the end of the transfer, amount will be
-			 * equal to the buffer size, which is divisible by
-			 * the bulk-out maxpacket size.
-			 */
-			set_bulk_out_req_length(fsg, bh, amount);
-			start_transfer(fsg, fsg->bulk_out, bh->outreq,
-					&bh->outreq_busy, &bh->state);
-			fsg->next_buffhd_to_fill = bh->next;
-			continue;
-		}
-
-		/* Write the received data to the backing file */
-		bh = fsg->next_buffhd_to_drain;
-		if (bh->state == BUF_STATE_EMPTY && !get_some_more)
-			break;			// We stopped early
-		if (bh->state == BUF_STATE_FULL) {
-			smp_rmb();
-			fsg->next_buffhd_to_drain = bh->next;
-			bh->state = BUF_STATE_EMPTY;
-
-			/* Did something go wrong with the transfer? */
-			if (bh->outreq->status != 0) {
-				curlun->sense_data = SS_COMMUNICATION_FAILURE;
-				curlun->sense_data_info = file_offset >> curlun->blkbits;
-				curlun->info_valid = 1;
-				break;
-			}
-
-			amount = bh->outreq->actual;
-			if (curlun->file_length - file_offset < amount) {
-				LERROR(curlun,
-	"write %u @ %llu beyond end %llu\n",
-	amount, (unsigned long long) file_offset,
-	(unsigned long long) curlun->file_length);
-				amount = curlun->file_length - file_offset;
-			}
-
-			/* Don't accept excess data.  The spec doesn't say
-			 * what to do in this case.  We'll ignore the error.
-			 */
-			amount = min(amount, bh->bulk_out_intended_length);
-
-			/* Don't write a partial block */
-			amount = round_down(amount, curlun->blksize);
-			if (amount == 0)
-				goto empty_write;
-
-			/* Perform the write */
-			file_offset_tmp = file_offset;
-			nwritten = vfs_write(curlun->filp,
-					(char __user *) bh->buf,
-					amount, &file_offset_tmp);
-			VLDBG(curlun, "file write %u @ %llu -> %d\n", amount,
-					(unsigned long long) file_offset,
-					(int) nwritten);
-			if (signal_pending(current))
-				return -EINTR;		// Interrupted!
-
-			if (nwritten < 0) {
-				LDBG(curlun, "error in file write: %d\n",
-						(int) nwritten);
-				nwritten = 0;
-			} else if (nwritten < amount) {
-				LDBG(curlun, "partial file write: %d/%u\n",
-						(int) nwritten, amount);
-				nwritten = round_down(nwritten, curlun->blksize);
-			}
-			file_offset += nwritten;
-			amount_left_to_write -= nwritten;
-			fsg->residue -= nwritten;
-
-			/* If an error occurred, report it and its position */
-			if (nwritten < amount) {
-				curlun->sense_data = SS_WRITE_ERROR;
-				curlun->sense_data_info = file_offset >> curlun->blkbits;
-				curlun->info_valid = 1;
-				break;
-			}
-
- empty_write:
-			/* Did the host decide to stop early? */
-			if (bh->outreq->actual < bh->bulk_out_intended_length) {
-				fsg->short_packet_received = 1;
-				break;
-			}
-			continue;
-		}
-
-		/* Wait for something to happen */
-		rc = sleep_thread(fsg);
-		if (rc)
-			return rc;
-	}
-
-	return -EIO;		// No default reply
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-static int do_synchronize_cache(struct fsg_dev *fsg)
-{
-	struct fsg_lun	*curlun = fsg->curlun;
-	int		rc;
-
-	/* We ignore the requested LBA and write out all file's
-	 * dirty data buffers. */
-	rc = fsg_lun_fsync_sub(curlun);
-	if (rc)
-		curlun->sense_data = SS_WRITE_ERROR;
-	return 0;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-static void invalidate_sub(struct fsg_lun *curlun)
-{
-	struct file	*filp = curlun->filp;
-	struct inode	*inode = filp->f_path.dentry->d_inode;
-	unsigned long	rc;
-
-	rc = invalidate_mapping_pages(inode->i_mapping, 0, -1);
-	VLDBG(curlun, "invalidate_mapping_pages -> %ld\n", rc);
-}
-
-static int do_verify(struct fsg_dev *fsg)
-{
-	struct fsg_lun		*curlun = fsg->curlun;
-	u32			lba;
-	u32			verification_length;
-	struct fsg_buffhd	*bh = fsg->next_buffhd_to_fill;
-	loff_t			file_offset, file_offset_tmp;
-	u32			amount_left;
-	unsigned int		amount;
-	ssize_t			nread;
-
-	/* Get the starting Logical Block Address and check that it's
-	 * not too big */
-	lba = get_unaligned_be32(&fsg->cmnd[2]);
-	if (lba >= curlun->num_sectors) {
-		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
-		return -EINVAL;
-	}
-
-	/* We allow DPO (Disable Page Out = don't save data in the
-	 * cache) but we don't implement it. */
-	if ((fsg->cmnd[1] & ~0x10) != 0) {
-		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
-		return -EINVAL;
-	}
-
-	verification_length = get_unaligned_be16(&fsg->cmnd[7]);
-	if (unlikely(verification_length == 0))
-		return -EIO;		// No default reply
-
-	/* Prepare to carry out the file verify */
-	amount_left = verification_length << curlun->blkbits;
-	file_offset = ((loff_t) lba) << curlun->blkbits;
-
-	/* Write out all the dirty buffers before invalidating them */
-	fsg_lun_fsync_sub(curlun);
-	if (signal_pending(current))
-		return -EINTR;
-
-	invalidate_sub(curlun);
-	if (signal_pending(current))
-		return -EINTR;
-
-	/* Just try to read the requested blocks */
-	while (amount_left > 0) {
-
-		/* Figure out how much we need to read:
-		 * Try to read the remaining amount, but not more than
-		 * the buffer size.
-		 * And don't try to read past the end of the file.
-		 */
-		amount = min((unsigned int) amount_left, mod_data.buflen);
-		amount = min((loff_t) amount,
-				curlun->file_length - file_offset);
-		if (amount == 0) {
-			curlun->sense_data =
-					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
-			curlun->sense_data_info = file_offset >> curlun->blkbits;
-			curlun->info_valid = 1;
-			break;
-		}
-
-		/* Perform the read */
-		file_offset_tmp = file_offset;
-		nread = vfs_read(curlun->filp,
-				(char __user *) bh->buf,
-				amount, &file_offset_tmp);
-		VLDBG(curlun, "file read %u @ %llu -> %d\n", amount,
-				(unsigned long long) file_offset,
-				(int) nread);
-		if (signal_pending(current))
-			return -EINTR;
-
-		if (nread < 0) {
-			LDBG(curlun, "error in file verify: %d\n",
-					(int) nread);
-			nread = 0;
-		} else if (nread < amount) {
-			LDBG(curlun, "partial file verify: %d/%u\n",
-					(int) nread, amount);
-			nread = round_down(nread, curlun->blksize);
-		}
-		if (nread == 0) {
-			curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
-			curlun->sense_data_info = file_offset >> curlun->blkbits;
-			curlun->info_valid = 1;
-			break;
-		}
-		file_offset += nread;
-		amount_left -= nread;
-	}
-	return 0;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-static int do_inquiry(struct fsg_dev *fsg, struct fsg_buffhd *bh)
-{
-	u8	*buf = (u8 *) bh->buf;
-
-	static char vendor_id[] = "Linux   ";
-	static char product_disk_id[] = "File-Stor Gadget";
-	static char product_cdrom_id[] = "File-CD Gadget  ";
-
-	if (!fsg->curlun) {		// Unsupported LUNs are okay
-		fsg->bad_lun_okay = 1;
-		memset(buf, 0, 36);
-		buf[0] = 0x7f;		// Unsupported, no device-type
-		buf[4] = 31;		// Additional length
-		return 36;
-	}
-
-	memset(buf, 0, 8);
-	buf[0] = (mod_data.cdrom ? TYPE_ROM : TYPE_DISK);
-	if (mod_data.removable)
-		buf[1] = 0x80;
-	buf[2] = 2;		// ANSI SCSI level 2
-	buf[3] = 2;		// SCSI-2 INQUIRY data format
-	buf[4] = 31;		// Additional length
-				// No special options
-	sprintf(buf + 8, "%-8s%-16s%04x", vendor_id,
-			(mod_data.cdrom ? product_cdrom_id :
-				product_disk_id),
-			mod_data.release);
-	return 36;
-}
-
-
-static int do_request_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh)
-{
-	struct fsg_lun	*curlun = fsg->curlun;
-	u8		*buf = (u8 *) bh->buf;
-	u32		sd, sdinfo;
-	int		valid;
-
-	/*
-	 * From the SCSI-2 spec., section 7.9 (Unit attention condition):
-	 *
-	 * If a REQUEST SENSE command is received from an initiator
-	 * with a pending unit attention condition (before the target
-	 * generates the contingent allegiance condition), then the
-	 * target shall either:
-	 *   a) report any pending sense data and preserve the unit
-	 *	attention condition on the logical unit, or,
-	 *   b) report the unit attention condition, may discard any
-	 *	pending sense data, and clear the unit attention
-	 *	condition on the logical unit for that initiator.
-	 *
-	 * FSG normally uses option a); enable this code to use option b).
-	 */
-#if 0
-	if (curlun && curlun->unit_attention_data != SS_NO_SENSE) {
-		curlun->sense_data = curlun->unit_attention_data;
-		curlun->unit_attention_data = SS_NO_SENSE;
-	}
-#endif
-
-	if (!curlun) {		// Unsupported LUNs are okay
-		fsg->bad_lun_okay = 1;
-		sd = SS_LOGICAL_UNIT_NOT_SUPPORTED;
-		sdinfo = 0;
-		valid = 0;
-	} else {
-		sd = curlun->sense_data;
-		sdinfo = curlun->sense_data_info;
-		valid = curlun->info_valid << 7;
-		curlun->sense_data = SS_NO_SENSE;
-		curlun->sense_data_info = 0;
-		curlun->info_valid = 0;
-	}
-
-	memset(buf, 0, 18);
-	buf[0] = valid | 0x70;			// Valid, current error
-	buf[2] = SK(sd);
-	put_unaligned_be32(sdinfo, &buf[3]);	/* Sense information */
-	buf[7] = 18 - 8;			// Additional sense length
-	buf[12] = ASC(sd);
-	buf[13] = ASCQ(sd);
-	return 18;
-}
-
-
-static int do_read_capacity(struct fsg_dev *fsg, struct fsg_buffhd *bh)
-{
-	struct fsg_lun	*curlun = fsg->curlun;
-	u32		lba = get_unaligned_be32(&fsg->cmnd[2]);
-	int		pmi = fsg->cmnd[8];
-	u8		*buf = (u8 *) bh->buf;
-
-	/* Check the PMI and LBA fields */
-	if (pmi > 1 || (pmi == 0 && lba != 0)) {
-		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
-		return -EINVAL;
-	}
-
-	put_unaligned_be32(curlun->num_sectors - 1, &buf[0]);
-						/* Max logical block */
-	put_unaligned_be32(curlun->blksize, &buf[4]);	/* Block length */
-	return 8;
-}
-
-
-static int do_read_header(struct fsg_dev *fsg, struct fsg_buffhd *bh)
-{
-	struct fsg_lun	*curlun = fsg->curlun;
-	int		msf = fsg->cmnd[1] & 0x02;
-	u32		lba = get_unaligned_be32(&fsg->cmnd[2]);
-	u8		*buf = (u8 *) bh->buf;
-
-	if ((fsg->cmnd[1] & ~0x02) != 0) {		/* Mask away MSF */
-		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
-		return -EINVAL;
-	}
-	if (lba >= curlun->num_sectors) {
-		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
-		return -EINVAL;
-	}
-
-	memset(buf, 0, 8);
-	buf[0] = 0x01;		/* 2048 bytes of user data, rest is EC */
-	store_cdrom_address(&buf[4], msf, lba);
-	return 8;
-}
-
-
-static int do_read_toc(struct fsg_dev *fsg, struct fsg_buffhd *bh)
-{
-	struct fsg_lun	*curlun = fsg->curlun;
-	int		msf = fsg->cmnd[1] & 0x02;
-	int		start_track = fsg->cmnd[6];
-	u8		*buf = (u8 *) bh->buf;
-
-	if ((fsg->cmnd[1] & ~0x02) != 0 ||		/* Mask away MSF */
-			start_track > 1) {
-		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
-		return -EINVAL;
-	}
-
-	memset(buf, 0, 20);
-	buf[1] = (20-2);		/* TOC data length */
-	buf[2] = 1;			/* First track number */
-	buf[3] = 1;			/* Last track number */
-	buf[5] = 0x16;			/* Data track, copying allowed */
-	buf[6] = 0x01;			/* Only track is number 1 */
-	store_cdrom_address(&buf[8], msf, 0);
-
-	buf[13] = 0x16;			/* Lead-out track is data */
-	buf[14] = 0xAA;			/* Lead-out track number */
-	store_cdrom_address(&buf[16], msf, curlun->num_sectors);
-	return 20;
-}
-
-
-static int do_mode_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh)
-{
-	struct fsg_lun	*curlun = fsg->curlun;
-	int		mscmnd = fsg->cmnd[0];
-	u8		*buf = (u8 *) bh->buf;
-	u8		*buf0 = buf;
-	int		pc, page_code;
-	int		changeable_values, all_pages;
-	int		valid_page = 0;
-	int		len, limit;
-
-	if ((fsg->cmnd[1] & ~0x08) != 0) {		// Mask away DBD
-		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
-		return -EINVAL;
-	}
-	pc = fsg->cmnd[2] >> 6;
-	page_code = fsg->cmnd[2] & 0x3f;
-	if (pc == 3) {
-		curlun->sense_data = SS_SAVING_PARAMETERS_NOT_SUPPORTED;
-		return -EINVAL;
-	}
-	changeable_values = (pc == 1);
-	all_pages = (page_code == 0x3f);
-
-	/* Write the mode parameter header.  Fixed values are: default
-	 * medium type, no cache control (DPOFUA), and no block descriptors.
-	 * The only variable value is the WriteProtect bit.  We will fill in
-	 * the mode data length later. */
-	memset(buf, 0, 8);
-	if (mscmnd == MODE_SENSE) {
-		buf[2] = (curlun->ro ? 0x80 : 0x00);		// WP, DPOFUA
-		buf += 4;
-		limit = 255;
-	} else {			// MODE_SENSE_10
-		buf[3] = (curlun->ro ? 0x80 : 0x00);		// WP, DPOFUA
-		buf += 8;
-		limit = 65535;		// Should really be mod_data.buflen
-	}
-
-	/* No block descriptors */
-
-	/* The mode pages, in numerical order.  The only page we support
-	 * is the Caching page. */
-	if (page_code == 0x08 || all_pages) {
-		valid_page = 1;
-		buf[0] = 0x08;		// Page code
-		buf[1] = 10;		// Page length
-		memset(buf+2, 0, 10);	// None of the fields are changeable
-
-		if (!changeable_values) {
-			buf[2] = 0x04;	// Write cache enable,
-					// Read cache not disabled
-					// No cache retention priorities
-			put_unaligned_be16(0xffff, &buf[4]);
-					/* Don't disable prefetch */
-					/* Minimum prefetch = 0 */
-			put_unaligned_be16(0xffff, &buf[8]);
-					/* Maximum prefetch */
-			put_unaligned_be16(0xffff, &buf[10]);
-					/* Maximum prefetch ceiling */
-		}
-		buf += 12;
-	}
-
-	/* Check that a valid page was requested and the mode data length
-	 * isn't too long. */
-	len = buf - buf0;
-	if (!valid_page || len > limit) {
-		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
-		return -EINVAL;
-	}
-
-	/*  Store the mode data length */
-	if (mscmnd == MODE_SENSE)
-		buf0[0] = len - 1;
-	else
-		put_unaligned_be16(len - 2, buf0);
-	return len;
-}
-
-
-static int do_start_stop(struct fsg_dev *fsg)
-{
-	struct fsg_lun	*curlun = fsg->curlun;
-	int		loej, start;
-
-	if (!mod_data.removable) {
-		curlun->sense_data = SS_INVALID_COMMAND;
-		return -EINVAL;
-	}
-
-	// int immed = fsg->cmnd[1] & 0x01;
-	loej = fsg->cmnd[4] & 0x02;
-	start = fsg->cmnd[4] & 0x01;
-
-#ifdef CONFIG_USB_FILE_STORAGE_TEST
-	if ((fsg->cmnd[1] & ~0x01) != 0 ||		// Mask away Immed
-			(fsg->cmnd[4] & ~0x03) != 0) {	// Mask LoEj, Start
-		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
-		return -EINVAL;
-	}
-
-	if (!start) {
-
-		/* Are we allowed to unload the media? */
-		if (curlun->prevent_medium_removal) {
-			LDBG(curlun, "unload attempt prevented\n");
-			curlun->sense_data = SS_MEDIUM_REMOVAL_PREVENTED;
-			return -EINVAL;
-		}
-		if (loej) {		// Simulate an unload/eject
-			up_read(&fsg->filesem);
-			down_write(&fsg->filesem);
-			fsg_lun_close(curlun);
-			up_write(&fsg->filesem);
-			down_read(&fsg->filesem);
-		}
-	} else {
-
-		/* Our emulation doesn't support mounting; the medium is
-		 * available for use as soon as it is loaded. */
-		if (!fsg_lun_is_open(curlun)) {
-			curlun->sense_data = SS_MEDIUM_NOT_PRESENT;
-			return -EINVAL;
-		}
-	}
-#endif
-	return 0;
-}
-
-
-static int do_prevent_allow(struct fsg_dev *fsg)
-{
-	struct fsg_lun	*curlun = fsg->curlun;
-	int		prevent;
-
-	if (!mod_data.removable) {
-		curlun->sense_data = SS_INVALID_COMMAND;
-		return -EINVAL;
-	}
-
-	prevent = fsg->cmnd[4] & 0x01;
-	if ((fsg->cmnd[4] & ~0x01) != 0) {		// Mask away Prevent
-		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
-		return -EINVAL;
-	}
-
-	if (curlun->prevent_medium_removal && !prevent)
-		fsg_lun_fsync_sub(curlun);
-	curlun->prevent_medium_removal = prevent;
-	return 0;
-}
-
-
-static int do_read_format_capacities(struct fsg_dev *fsg,
-			struct fsg_buffhd *bh)
-{
-	struct fsg_lun	*curlun = fsg->curlun;
-	u8		*buf = (u8 *) bh->buf;
-
-	buf[0] = buf[1] = buf[2] = 0;
-	buf[3] = 8;		// Only the Current/Maximum Capacity Descriptor
-	buf += 4;
-
-	put_unaligned_be32(curlun->num_sectors, &buf[0]);
-						/* Number of blocks */
-	put_unaligned_be32(curlun->blksize, &buf[4]);	/* Block length */
-	buf[4] = 0x02;				/* Current capacity */
-	return 12;
-}
-
-
-static int do_mode_select(struct fsg_dev *fsg, struct fsg_buffhd *bh)
-{
-	struct fsg_lun	*curlun = fsg->curlun;
-
-	/* We don't support MODE SELECT */
-	curlun->sense_data = SS_INVALID_COMMAND;
-	return -EINVAL;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-static int halt_bulk_in_endpoint(struct fsg_dev *fsg)
-{
-	int	rc;
-
-	rc = fsg_set_halt(fsg, fsg->bulk_in);
-	if (rc == -EAGAIN)
-		VDBG(fsg, "delayed bulk-in endpoint halt\n");
-	while (rc != 0) {
-		if (rc != -EAGAIN) {
-			WARNING(fsg, "usb_ep_set_halt -> %d\n", rc);
-			rc = 0;
-			break;
-		}
-
-		/* Wait for a short time and then try again */
-		if (msleep_interruptible(100) != 0)
-			return -EINTR;
-		rc = usb_ep_set_halt(fsg->bulk_in);
-	}
-	return rc;
-}
-
-static int wedge_bulk_in_endpoint(struct fsg_dev *fsg)
-{
-	int	rc;
-
-	DBG(fsg, "bulk-in set wedge\n");
-	rc = usb_ep_set_wedge(fsg->bulk_in);
-	if (rc == -EAGAIN)
-		VDBG(fsg, "delayed bulk-in endpoint wedge\n");
-	while (rc != 0) {
-		if (rc != -EAGAIN) {
-			WARNING(fsg, "usb_ep_set_wedge -> %d\n", rc);
-			rc = 0;
-			break;
-		}
-
-		/* Wait for a short time and then try again */
-		if (msleep_interruptible(100) != 0)
-			return -EINTR;
-		rc = usb_ep_set_wedge(fsg->bulk_in);
-	}
-	return rc;
-}
-
-static int throw_away_data(struct fsg_dev *fsg)
-{
-	struct fsg_buffhd	*bh;
-	u32			amount;
-	int			rc;
-
-	while ((bh = fsg->next_buffhd_to_drain)->state != BUF_STATE_EMPTY ||
-			fsg->usb_amount_left > 0) {
-
-		/* Throw away the data in a filled buffer */
-		if (bh->state == BUF_STATE_FULL) {
-			smp_rmb();
-			bh->state = BUF_STATE_EMPTY;
-			fsg->next_buffhd_to_drain = bh->next;
-
-			/* A short packet or an error ends everything */
-			if (bh->outreq->actual < bh->bulk_out_intended_length ||
-					bh->outreq->status != 0) {
-				raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT);
-				return -EINTR;
-			}
-			continue;
-		}
-
-		/* Try to submit another request if we need one */
-		bh = fsg->next_buffhd_to_fill;
-		if (bh->state == BUF_STATE_EMPTY && fsg->usb_amount_left > 0) {
-			amount = min(fsg->usb_amount_left,
-					(u32) mod_data.buflen);
-
-			/* Except at the end of the transfer, amount will be
-			 * equal to the buffer size, which is divisible by
-			 * the bulk-out maxpacket size.
-			 */
-			set_bulk_out_req_length(fsg, bh, amount);
-			start_transfer(fsg, fsg->bulk_out, bh->outreq,
-					&bh->outreq_busy, &bh->state);
-			fsg->next_buffhd_to_fill = bh->next;
-			fsg->usb_amount_left -= amount;
-			continue;
-		}
-
-		/* Otherwise wait for something to happen */
-		rc = sleep_thread(fsg);
-		if (rc)
-			return rc;
-	}
-	return 0;
-}
-
-
-static int finish_reply(struct fsg_dev *fsg)
-{
-	struct fsg_buffhd	*bh = fsg->next_buffhd_to_fill;
-	int			rc = 0;
-
-	switch (fsg->data_dir) {
-	case DATA_DIR_NONE:
-		break;			// Nothing to send
-
-	/* If we don't know whether the host wants to read or write,
-	 * this must be CB or CBI with an unknown command.  We mustn't
-	 * try to send or receive any data.  So stall both bulk pipes
-	 * if we can and wait for a reset. */
-	case DATA_DIR_UNKNOWN:
-		if (mod_data.can_stall) {
-			fsg_set_halt(fsg, fsg->bulk_out);
-			rc = halt_bulk_in_endpoint(fsg);
-		}
-		break;
-
-	/* All but the last buffer of data must have already been sent */
-	case DATA_DIR_TO_HOST:
-		if (fsg->data_size == 0)
-			;		// Nothing to send
-
-		/* If there's no residue, simply send the last buffer */
-		else if (fsg->residue == 0) {
-			bh->inreq->zero = 0;
-			start_transfer(fsg, fsg->bulk_in, bh->inreq,
-					&bh->inreq_busy, &bh->state);
-			fsg->next_buffhd_to_fill = bh->next;
-		}
-
-		/* There is a residue.  For CB and CBI, simply mark the end
-		 * of the data with a short packet.  However, if we are
-		 * allowed to stall, there was no data at all (residue ==
-		 * data_size), and the command failed (invalid LUN or
-		 * sense data is set), then halt the bulk-in endpoint
-		 * instead. */
-		else if (!transport_is_bbb()) {
-			if (mod_data.can_stall &&
-					fsg->residue == fsg->data_size &&
-	(!fsg->curlun || fsg->curlun->sense_data != SS_NO_SENSE)) {
-				bh->state = BUF_STATE_EMPTY;
-				rc = halt_bulk_in_endpoint(fsg);
-			} else {
-				bh->inreq->zero = 1;
-				start_transfer(fsg, fsg->bulk_in, bh->inreq,
-						&bh->inreq_busy, &bh->state);
-				fsg->next_buffhd_to_fill = bh->next;
-			}
-		}
-
-		/*
-		 * For Bulk-only, mark the end of the data with a short
-		 * packet.  If we are allowed to stall, halt the bulk-in
-		 * endpoint.  (Note: This violates the Bulk-Only Transport
-		 * specification, which requires us to pad the data if we
-		 * don't halt the endpoint.  Presumably nobody will mind.)
-		 */
-		else {
-			bh->inreq->zero = 1;
-			start_transfer(fsg, fsg->bulk_in, bh->inreq,
-					&bh->inreq_busy, &bh->state);
-			fsg->next_buffhd_to_fill = bh->next;
-			if (mod_data.can_stall)
-				rc = halt_bulk_in_endpoint(fsg);
-		}
-		break;
-
-	/* We have processed all we want from the data the host has sent.
-	 * There may still be outstanding bulk-out requests. */
-	case DATA_DIR_FROM_HOST:
-		if (fsg->residue == 0)
-			;		// Nothing to receive
-
-		/* Did the host stop sending unexpectedly early? */
-		else if (fsg->short_packet_received) {
-			raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT);
-			rc = -EINTR;
-		}
-
-		/* We haven't processed all the incoming data.  Even though
-		 * we may be allowed to stall, doing so would cause a race.
-		 * The controller may already have ACK'ed all the remaining
-		 * bulk-out packets, in which case the host wouldn't see a
-		 * STALL.  Not realizing the endpoint was halted, it wouldn't
-		 * clear the halt -- leading to problems later on. */
-#if 0
-		else if (mod_data.can_stall) {
-			fsg_set_halt(fsg, fsg->bulk_out);
-			raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT);
-			rc = -EINTR;
-		}
-#endif
-
-		/* We can't stall.  Read in the excess data and throw it
-		 * all away. */
-		else
-			rc = throw_away_data(fsg);
-		break;
-	}
-	return rc;
-}
-
-
-static int send_status(struct fsg_dev *fsg)
-{
-	struct fsg_lun		*curlun = fsg->curlun;
-	struct fsg_buffhd	*bh;
-	int			rc;
-	u8			status = US_BULK_STAT_OK;
-	u32			sd, sdinfo = 0;
-
-	/* Wait for the next buffer to become available */
-	bh = fsg->next_buffhd_to_fill;
-	while (bh->state != BUF_STATE_EMPTY) {
-		rc = sleep_thread(fsg);
-		if (rc)
-			return rc;
-	}
-
-	if (curlun) {
-		sd = curlun->sense_data;
-		sdinfo = curlun->sense_data_info;
-	} else if (fsg->bad_lun_okay)
-		sd = SS_NO_SENSE;
-	else
-		sd = SS_LOGICAL_UNIT_NOT_SUPPORTED;
-
-	if (fsg->phase_error) {
-		DBG(fsg, "sending phase-error status\n");
-		status = US_BULK_STAT_PHASE;
-		sd = SS_INVALID_COMMAND;
-	} else if (sd != SS_NO_SENSE) {
-		DBG(fsg, "sending command-failure status\n");
-		status = US_BULK_STAT_FAIL;
-		VDBG(fsg, "  sense data: SK x%02x, ASC x%02x, ASCQ x%02x;"
-				"  info x%x\n",
-				SK(sd), ASC(sd), ASCQ(sd), sdinfo);
-	}
-
-	if (transport_is_bbb()) {
-		struct bulk_cs_wrap	*csw = bh->buf;
-
-		/* Store and send the Bulk-only CSW */
-		csw->Signature = cpu_to_le32(US_BULK_CS_SIGN);
-		csw->Tag = fsg->tag;
-		csw->Residue = cpu_to_le32(fsg->residue);
-		csw->Status = status;
-
-		bh->inreq->length = US_BULK_CS_WRAP_LEN;
-		bh->inreq->zero = 0;
-		start_transfer(fsg, fsg->bulk_in, bh->inreq,
-				&bh->inreq_busy, &bh->state);
-
-	} else if (mod_data.transport_type == USB_PR_CB) {
-
-		/* Control-Bulk transport has no status phase! */
-		return 0;
-
-	} else {			// USB_PR_CBI
-		struct interrupt_data	*buf = bh->buf;
-
-		/* Store and send the Interrupt data.  UFI sends the ASC
-		 * and ASCQ bytes.  Everything else sends a Type (which
-		 * is always 0) and the status Value. */
-		if (mod_data.protocol_type == USB_SC_UFI) {
-			buf->bType = ASC(sd);
-			buf->bValue = ASCQ(sd);
-		} else {
-			buf->bType = 0;
-			buf->bValue = status;
-		}
-		fsg->intreq->length = CBI_INTERRUPT_DATA_LEN;
-
-		fsg->intr_buffhd = bh;		// Point to the right buffhd
-		fsg->intreq->buf = bh->inreq->buf;
-		fsg->intreq->context = bh;
-		start_transfer(fsg, fsg->intr_in, fsg->intreq,
-				&fsg->intreq_busy, &bh->state);
-	}
-
-	fsg->next_buffhd_to_fill = bh->next;
-	return 0;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* Check whether the command is properly formed and whether its data size
- * and direction agree with the values we already have. */
-static int check_command(struct fsg_dev *fsg, int cmnd_size,
-		enum data_direction data_dir, unsigned int mask,
-		int needs_medium, const char *name)
-{
-	int			i;
-	int			lun = fsg->cmnd[1] >> 5;
-	static const char	dirletter[4] = {'u', 'o', 'i', 'n'};
-	char			hdlen[20];
-	struct fsg_lun		*curlun;
-
-	/* Adjust the expected cmnd_size for protocol encapsulation padding.
-	 * Transparent SCSI doesn't pad. */
-	if (protocol_is_scsi())
-		;
-
-	/* There's some disagreement as to whether RBC pads commands or not.
-	 * We'll play it safe and accept either form. */
-	else if (mod_data.protocol_type == USB_SC_RBC) {
-		if (fsg->cmnd_size == 12)
-			cmnd_size = 12;
-
-	/* All the other protocols pad to 12 bytes */
-	} else
-		cmnd_size = 12;
-
-	hdlen[0] = 0;
-	if (fsg->data_dir != DATA_DIR_UNKNOWN)
-		sprintf(hdlen, ", H%c=%u", dirletter[(int) fsg->data_dir],
-				fsg->data_size);
-	VDBG(fsg, "SCSI command: %s;  Dc=%d, D%c=%u;  Hc=%d%s\n",
-			name, cmnd_size, dirletter[(int) data_dir],
-			fsg->data_size_from_cmnd, fsg->cmnd_size, hdlen);
-
-	/* We can't reply at all until we know the correct data direction
-	 * and size. */
-	if (fsg->data_size_from_cmnd == 0)
-		data_dir = DATA_DIR_NONE;
-	if (fsg->data_dir == DATA_DIR_UNKNOWN) {	// CB or CBI
-		fsg->data_dir = data_dir;
-		fsg->data_size = fsg->data_size_from_cmnd;
-
-	} else {					// Bulk-only
-		if (fsg->data_size < fsg->data_size_from_cmnd) {
-
-			/* Host data size < Device data size is a phase error.
-			 * Carry out the command, but only transfer as much
-			 * as we are allowed. */
-			fsg->data_size_from_cmnd = fsg->data_size;
-			fsg->phase_error = 1;
-		}
-	}
-	fsg->residue = fsg->usb_amount_left = fsg->data_size;
-
-	/* Conflicting data directions is a phase error */
-	if (fsg->data_dir != data_dir && fsg->data_size_from_cmnd > 0) {
-		fsg->phase_error = 1;
-		return -EINVAL;
-	}
-
-	/* Verify the length of the command itself */
-	if (cmnd_size != fsg->cmnd_size) {
-
-		/* Special case workaround: There are plenty of buggy SCSI
-		 * implementations. Many have issues with cbw->Length
-		 * field passing a wrong command size. For those cases we
-		 * always try to work around the problem by using the length
-		 * sent by the host side provided it is at least as large
-		 * as the correct command length.
-		 * Examples of such cases would be MS-Windows, which issues
-		 * REQUEST SENSE with cbw->Length == 12 where it should
-		 * be 6, and xbox360 issuing INQUIRY, TEST UNIT READY and
-		 * REQUEST SENSE with cbw->Length == 10 where it should
-		 * be 6 as well.
-		 */
-		if (cmnd_size <= fsg->cmnd_size) {
-			DBG(fsg, "%s is buggy! Expected length %d "
-					"but we got %d\n", name,
-					cmnd_size, fsg->cmnd_size);
-			cmnd_size = fsg->cmnd_size;
-		} else {
-			fsg->phase_error = 1;
-			return -EINVAL;
-		}
-	}
-
-	/* Check that the LUN values are consistent */
-	if (transport_is_bbb()) {
-		if (fsg->lun != lun)
-			DBG(fsg, "using LUN %d from CBW, "
-					"not LUN %d from CDB\n",
-					fsg->lun, lun);
-	}
-
-	/* Check the LUN */
-	curlun = fsg->curlun;
-	if (curlun) {
-		if (fsg->cmnd[0] != REQUEST_SENSE) {
-			curlun->sense_data = SS_NO_SENSE;
-			curlun->sense_data_info = 0;
-			curlun->info_valid = 0;
-		}
-	} else {
-		fsg->bad_lun_okay = 0;
-
-		/* INQUIRY and REQUEST SENSE commands are explicitly allowed
-		 * to use unsupported LUNs; all others may not. */
-		if (fsg->cmnd[0] != INQUIRY &&
-				fsg->cmnd[0] != REQUEST_SENSE) {
-			DBG(fsg, "unsupported LUN %d\n", fsg->lun);
-			return -EINVAL;
-		}
-	}
-
-	/* If a unit attention condition exists, only INQUIRY and
-	 * REQUEST SENSE commands are allowed; anything else must fail. */
-	if (curlun && curlun->unit_attention_data != SS_NO_SENSE &&
-			fsg->cmnd[0] != INQUIRY &&
-			fsg->cmnd[0] != REQUEST_SENSE) {
-		curlun->sense_data = curlun->unit_attention_data;
-		curlun->unit_attention_data = SS_NO_SENSE;
-		return -EINVAL;
-	}
-
-	/* Check that only command bytes listed in the mask are non-zero */
-	fsg->cmnd[1] &= 0x1f;			// Mask away the LUN
-	for (i = 1; i < cmnd_size; ++i) {
-		if (fsg->cmnd[i] && !(mask & (1 << i))) {
-			if (curlun)
-				curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
-			return -EINVAL;
-		}
-	}
-
-	/* If the medium isn't mounted and the command needs to access
-	 * it, return an error. */
-	if (curlun && !fsg_lun_is_open(curlun) && needs_medium) {
-		curlun->sense_data = SS_MEDIUM_NOT_PRESENT;
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-/* wrapper of check_command for data size in blocks handling */
-static int check_command_size_in_blocks(struct fsg_dev *fsg, int cmnd_size,
-		enum data_direction data_dir, unsigned int mask,
-		int needs_medium, const char *name)
-{
-	if (fsg->curlun)
-		fsg->data_size_from_cmnd <<= fsg->curlun->blkbits;
-	return check_command(fsg, cmnd_size, data_dir,
-			mask, needs_medium, name);
-}
-
-static int do_scsi_command(struct fsg_dev *fsg)
-{
-	struct fsg_buffhd	*bh;
-	int			rc;
-	int			reply = -EINVAL;
-	int			i;
-	static char		unknown[16];
-
-	dump_cdb(fsg);
-
-	/* Wait for the next buffer to become available for data or status */
-	bh = fsg->next_buffhd_to_drain = fsg->next_buffhd_to_fill;
-	while (bh->state != BUF_STATE_EMPTY) {
-		rc = sleep_thread(fsg);
-		if (rc)
-			return rc;
-	}
-	fsg->phase_error = 0;
-	fsg->short_packet_received = 0;
-
-	down_read(&fsg->filesem);	// We're using the backing file
-	switch (fsg->cmnd[0]) {
-
-	case INQUIRY:
-		fsg->data_size_from_cmnd = fsg->cmnd[4];
-		if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST,
-				(1<<4), 0,
-				"INQUIRY")) == 0)
-			reply = do_inquiry(fsg, bh);
-		break;
-
-	case MODE_SELECT:
-		fsg->data_size_from_cmnd = fsg->cmnd[4];
-		if ((reply = check_command(fsg, 6, DATA_DIR_FROM_HOST,
-				(1<<1) | (1<<4), 0,
-				"MODE SELECT(6)")) == 0)
-			reply = do_mode_select(fsg, bh);
-		break;
-
-	case MODE_SELECT_10:
-		fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
-		if ((reply = check_command(fsg, 10, DATA_DIR_FROM_HOST,
-				(1<<1) | (3<<7), 0,
-				"MODE SELECT(10)")) == 0)
-			reply = do_mode_select(fsg, bh);
-		break;
-
-	case MODE_SENSE:
-		fsg->data_size_from_cmnd = fsg->cmnd[4];
-		if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST,
-				(1<<1) | (1<<2) | (1<<4), 0,
-				"MODE SENSE(6)")) == 0)
-			reply = do_mode_sense(fsg, bh);
-		break;
-
-	case MODE_SENSE_10:
-		fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
-		if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
-				(1<<1) | (1<<2) | (3<<7), 0,
-				"MODE SENSE(10)")) == 0)
-			reply = do_mode_sense(fsg, bh);
-		break;
-
-	case ALLOW_MEDIUM_REMOVAL:
-		fsg->data_size_from_cmnd = 0;
-		if ((reply = check_command(fsg, 6, DATA_DIR_NONE,
-				(1<<4), 0,
-				"PREVENT-ALLOW MEDIUM REMOVAL")) == 0)
-			reply = do_prevent_allow(fsg);
-		break;
-
-	case READ_6:
-		i = fsg->cmnd[4];
-		fsg->data_size_from_cmnd = (i == 0) ? 256 : i;
-		if ((reply = check_command_size_in_blocks(fsg, 6,
-				DATA_DIR_TO_HOST,
-				(7<<1) | (1<<4), 1,
-				"READ(6)")) == 0)
-			reply = do_read(fsg);
-		break;
-
-	case READ_10:
-		fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
-		if ((reply = check_command_size_in_blocks(fsg, 10,
-				DATA_DIR_TO_HOST,
-				(1<<1) | (0xf<<2) | (3<<7), 1,
-				"READ(10)")) == 0)
-			reply = do_read(fsg);
-		break;
-
-	case READ_12:
-		fsg->data_size_from_cmnd = get_unaligned_be32(&fsg->cmnd[6]);
-		if ((reply = check_command_size_in_blocks(fsg, 12,
-				DATA_DIR_TO_HOST,
-				(1<<1) | (0xf<<2) | (0xf<<6), 1,
-				"READ(12)")) == 0)
-			reply = do_read(fsg);
-		break;
-
-	case READ_CAPACITY:
-		fsg->data_size_from_cmnd = 8;
-		if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
-				(0xf<<2) | (1<<8), 1,
-				"READ CAPACITY")) == 0)
-			reply = do_read_capacity(fsg, bh);
-		break;
-
-	case READ_HEADER:
-		if (!mod_data.cdrom)
-			goto unknown_cmnd;
-		fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
-		if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
-				(3<<7) | (0x1f<<1), 1,
-				"READ HEADER")) == 0)
-			reply = do_read_header(fsg, bh);
-		break;
-
-	case READ_TOC:
-		if (!mod_data.cdrom)
-			goto unknown_cmnd;
-		fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
-		if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
-				(7<<6) | (1<<1), 1,
-				"READ TOC")) == 0)
-			reply = do_read_toc(fsg, bh);
-		break;
-
-	case READ_FORMAT_CAPACITIES:
-		fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
-		if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
-				(3<<7), 1,
-				"READ FORMAT CAPACITIES")) == 0)
-			reply = do_read_format_capacities(fsg, bh);
-		break;
-
-	case REQUEST_SENSE:
-		fsg->data_size_from_cmnd = fsg->cmnd[4];
-		if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST,
-				(1<<4), 0,
-				"REQUEST SENSE")) == 0)
-			reply = do_request_sense(fsg, bh);
-		break;
-
-	case START_STOP:
-		fsg->data_size_from_cmnd = 0;
-		if ((reply = check_command(fsg, 6, DATA_DIR_NONE,
-				(1<<1) | (1<<4), 0,
-				"START-STOP UNIT")) == 0)
-			reply = do_start_stop(fsg);
-		break;
-
-	case SYNCHRONIZE_CACHE:
-		fsg->data_size_from_cmnd = 0;
-		if ((reply = check_command(fsg, 10, DATA_DIR_NONE,
-				(0xf<<2) | (3<<7), 1,
-				"SYNCHRONIZE CACHE")) == 0)
-			reply = do_synchronize_cache(fsg);
-		break;
-
-	case TEST_UNIT_READY:
-		fsg->data_size_from_cmnd = 0;
-		reply = check_command(fsg, 6, DATA_DIR_NONE,
-				0, 1,
-				"TEST UNIT READY");
-		break;
-
-	/* Although optional, this command is used by MS-Windows.  We
-	 * support a minimal version: BytChk must be 0. */
-	case VERIFY:
-		fsg->data_size_from_cmnd = 0;
-		if ((reply = check_command(fsg, 10, DATA_DIR_NONE,
-				(1<<1) | (0xf<<2) | (3<<7), 1,
-				"VERIFY")) == 0)
-			reply = do_verify(fsg);
-		break;
-
-	case WRITE_6:
-		i = fsg->cmnd[4];
-		fsg->data_size_from_cmnd = (i == 0) ? 256 : i;
-		if ((reply = check_command_size_in_blocks(fsg, 6,
-				DATA_DIR_FROM_HOST,
-				(7<<1) | (1<<4), 1,
-				"WRITE(6)")) == 0)
-			reply = do_write(fsg);
-		break;
-
-	case WRITE_10:
-		fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
-		if ((reply = check_command_size_in_blocks(fsg, 10,
-				DATA_DIR_FROM_HOST,
-				(1<<1) | (0xf<<2) | (3<<7), 1,
-				"WRITE(10)")) == 0)
-			reply = do_write(fsg);
-		break;
-
-	case WRITE_12:
-		fsg->data_size_from_cmnd = get_unaligned_be32(&fsg->cmnd[6]);
-		if ((reply = check_command_size_in_blocks(fsg, 12,
-				DATA_DIR_FROM_HOST,
-				(1<<1) | (0xf<<2) | (0xf<<6), 1,
-				"WRITE(12)")) == 0)
-			reply = do_write(fsg);
-		break;
-
-	/* Some mandatory commands that we recognize but don't implement.
-	 * They don't mean much in this setting.  It's left as an exercise
-	 * for anyone interested to implement RESERVE and RELEASE in terms
-	 * of Posix locks. */
-	case FORMAT_UNIT:
-	case RELEASE:
-	case RESERVE:
-	case SEND_DIAGNOSTIC:
-		// Fall through
-
-	default:
- unknown_cmnd:
-		fsg->data_size_from_cmnd = 0;
-		sprintf(unknown, "Unknown x%02x", fsg->cmnd[0]);
-		if ((reply = check_command(fsg, fsg->cmnd_size,
-				DATA_DIR_UNKNOWN, ~0, 0, unknown)) == 0) {
-			fsg->curlun->sense_data = SS_INVALID_COMMAND;
-			reply = -EINVAL;
-		}
-		break;
-	}
-	up_read(&fsg->filesem);
-
-	if (reply == -EINTR || signal_pending(current))
-		return -EINTR;
-
-	/* Set up the single reply buffer for finish_reply() */
-	if (reply == -EINVAL)
-		reply = 0;		// Error reply length
-	if (reply >= 0 && fsg->data_dir == DATA_DIR_TO_HOST) {
-		reply = min((u32) reply, fsg->data_size_from_cmnd);
-		bh->inreq->length = reply;
-		bh->state = BUF_STATE_FULL;
-		fsg->residue -= reply;
-	}				// Otherwise it's already set
-
-	return 0;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
-{
-	struct usb_request		*req = bh->outreq;
-	struct bulk_cb_wrap	*cbw = req->buf;
-
-	/* Was this a real packet?  Should it be ignored? */
-	if (req->status || test_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags))
-		return -EINVAL;
-
-	/* Is the CBW valid? */
-	if (req->actual != US_BULK_CB_WRAP_LEN ||
-			cbw->Signature != cpu_to_le32(
-				US_BULK_CB_SIGN)) {
-		DBG(fsg, "invalid CBW: len %u sig 0x%x\n",
-				req->actual,
-				le32_to_cpu(cbw->Signature));
-
-		/* The Bulk-only spec says we MUST stall the IN endpoint
-		 * (6.6.1), so it's unavoidable.  It also says we must
-		 * retain this state until the next reset, but there's
-		 * no way to tell the controller driver it should ignore
-		 * Clear-Feature(HALT) requests.
-		 *
-		 * We aren't required to halt the OUT endpoint; instead
-		 * we can simply accept and discard any data received
-		 * until the next reset. */
-		wedge_bulk_in_endpoint(fsg);
-		set_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
-		return -EINVAL;
-	}
-
-	/* Is the CBW meaningful? */
-	if (cbw->Lun >= FSG_MAX_LUNS || cbw->Flags & ~US_BULK_FLAG_IN ||
-			cbw->Length <= 0 || cbw->Length > MAX_COMMAND_SIZE) {
-		DBG(fsg, "non-meaningful CBW: lun = %u, flags = 0x%x, "
-				"cmdlen %u\n",
-				cbw->Lun, cbw->Flags, cbw->Length);
-
-		/* We can do anything we want here, so let's stall the
-		 * bulk pipes if we are allowed to. */
-		if (mod_data.can_stall) {
-			fsg_set_halt(fsg, fsg->bulk_out);
-			halt_bulk_in_endpoint(fsg);
-		}
-		return -EINVAL;
-	}
-
-	/* Save the command for later */
-	fsg->cmnd_size = cbw->Length;
-	memcpy(fsg->cmnd, cbw->CDB, fsg->cmnd_size);
-	if (cbw->Flags & US_BULK_FLAG_IN)
-		fsg->data_dir = DATA_DIR_TO_HOST;
-	else
-		fsg->data_dir = DATA_DIR_FROM_HOST;
-	fsg->data_size = le32_to_cpu(cbw->DataTransferLength);
-	if (fsg->data_size == 0)
-		fsg->data_dir = DATA_DIR_NONE;
-	fsg->lun = cbw->Lun;
-	fsg->tag = cbw->Tag;
-	return 0;
-}
-
-
-static int get_next_command(struct fsg_dev *fsg)
-{
-	struct fsg_buffhd	*bh;
-	int			rc = 0;
-
-	if (transport_is_bbb()) {
-
-		/* Wait for the next buffer to become available */
-		bh = fsg->next_buffhd_to_fill;
-		while (bh->state != BUF_STATE_EMPTY) {
-			rc = sleep_thread(fsg);
-			if (rc)
-				return rc;
-		}
-
-		/* Queue a request to read a Bulk-only CBW */
-		set_bulk_out_req_length(fsg, bh, US_BULK_CB_WRAP_LEN);
-		start_transfer(fsg, fsg->bulk_out, bh->outreq,
-				&bh->outreq_busy, &bh->state);
-
-		/* We will drain the buffer in software, which means we
-		 * can reuse it for the next filling.  No need to advance
-		 * next_buffhd_to_fill. */
-
-		/* Wait for the CBW to arrive */
-		while (bh->state != BUF_STATE_FULL) {
-			rc = sleep_thread(fsg);
-			if (rc)
-				return rc;
-		}
-		smp_rmb();
-		rc = received_cbw(fsg, bh);
-		bh->state = BUF_STATE_EMPTY;
-
-	} else {		// USB_PR_CB or USB_PR_CBI
-
-		/* Wait for the next command to arrive */
-		while (fsg->cbbuf_cmnd_size == 0) {
-			rc = sleep_thread(fsg);
-			if (rc)
-				return rc;
-		}
-
-		/* Is the previous status interrupt request still busy?
-		 * The host is allowed to skip reading the status,
-		 * so we must cancel it. */
-		if (fsg->intreq_busy)
-			usb_ep_dequeue(fsg->intr_in, fsg->intreq);
-
-		/* Copy the command and mark the buffer empty */
-		fsg->data_dir = DATA_DIR_UNKNOWN;
-		spin_lock_irq(&fsg->lock);
-		fsg->cmnd_size = fsg->cbbuf_cmnd_size;
-		memcpy(fsg->cmnd, fsg->cbbuf_cmnd, fsg->cmnd_size);
-		fsg->cbbuf_cmnd_size = 0;
-		spin_unlock_irq(&fsg->lock);
-
-		/* Use LUN from the command */
-		fsg->lun = fsg->cmnd[1] >> 5;
-	}
-
-	/* Update current lun */
-	if (fsg->lun >= 0 && fsg->lun < fsg->nluns)
-		fsg->curlun = &fsg->luns[fsg->lun];
-	else
-		fsg->curlun = NULL;
-
-	return rc;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-static int enable_endpoint(struct fsg_dev *fsg, struct usb_ep *ep,
-		const struct usb_endpoint_descriptor *d)
-{
-	int	rc;
-
-	ep->driver_data = fsg;
-	ep->desc = d;
-	rc = usb_ep_enable(ep);
-	if (rc)
-		ERROR(fsg, "can't enable %s, result %d\n", ep->name, rc);
-	return rc;
-}
-
-static int alloc_request(struct fsg_dev *fsg, struct usb_ep *ep,
-		struct usb_request **preq)
-{
-	*preq = usb_ep_alloc_request(ep, GFP_ATOMIC);
-	if (*preq)
-		return 0;
-	ERROR(fsg, "can't allocate request for %s\n", ep->name);
-	return -ENOMEM;
-}
-
-/*
- * Reset interface setting and re-init endpoint state (toggle etc).
- * Call with altsetting < 0 to disable the interface.  The only other
- * available altsetting is 0, which enables the interface.
- */
-static int do_set_interface(struct fsg_dev *fsg, int altsetting)
-{
-	int	rc = 0;
-	int	i;
-	const struct usb_endpoint_descriptor	*d;
-
-	if (fsg->running)
-		DBG(fsg, "reset interface\n");
-
-reset:
-	/* Deallocate the requests */
-	for (i = 0; i < fsg_num_buffers; ++i) {
-		struct fsg_buffhd *bh = &fsg->buffhds[i];
-
-		if (bh->inreq) {
-			usb_ep_free_request(fsg->bulk_in, bh->inreq);
-			bh->inreq = NULL;
-		}
-		if (bh->outreq) {
-			usb_ep_free_request(fsg->bulk_out, bh->outreq);
-			bh->outreq = NULL;
-		}
-	}
-	if (fsg->intreq) {
-		usb_ep_free_request(fsg->intr_in, fsg->intreq);
-		fsg->intreq = NULL;
-	}
-
-	/* Disable the endpoints */
-	if (fsg->bulk_in_enabled) {
-		usb_ep_disable(fsg->bulk_in);
-		fsg->bulk_in_enabled = 0;
-	}
-	if (fsg->bulk_out_enabled) {
-		usb_ep_disable(fsg->bulk_out);
-		fsg->bulk_out_enabled = 0;
-	}
-	if (fsg->intr_in_enabled) {
-		usb_ep_disable(fsg->intr_in);
-		fsg->intr_in_enabled = 0;
-	}
-
-	fsg->running = 0;
-	if (altsetting < 0 || rc != 0)
-		return rc;
-
-	DBG(fsg, "set interface %d\n", altsetting);
-
-	/* Enable the endpoints */
-	d = fsg_ep_desc(fsg->gadget,
-			&fsg_fs_bulk_in_desc, &fsg_hs_bulk_in_desc,
-			&fsg_ss_bulk_in_desc);
-	if ((rc = enable_endpoint(fsg, fsg->bulk_in, d)) != 0)
-		goto reset;
-	fsg->bulk_in_enabled = 1;
-
-	d = fsg_ep_desc(fsg->gadget,
-			&fsg_fs_bulk_out_desc, &fsg_hs_bulk_out_desc,
-			&fsg_ss_bulk_out_desc);
-	if ((rc = enable_endpoint(fsg, fsg->bulk_out, d)) != 0)
-		goto reset;
-	fsg->bulk_out_enabled = 1;
-	fsg->bulk_out_maxpacket = usb_endpoint_maxp(d);
-	clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
-
-	if (transport_is_cbi()) {
-		d = fsg_ep_desc(fsg->gadget,
-				&fsg_fs_intr_in_desc, &fsg_hs_intr_in_desc,
-				&fsg_ss_intr_in_desc);
-		if ((rc = enable_endpoint(fsg, fsg->intr_in, d)) != 0)
-			goto reset;
-		fsg->intr_in_enabled = 1;
-	}
-
-	/* Allocate the requests */
-	for (i = 0; i < fsg_num_buffers; ++i) {
-		struct fsg_buffhd	*bh = &fsg->buffhds[i];
-
-		if ((rc = alloc_request(fsg, fsg->bulk_in, &bh->inreq)) != 0)
-			goto reset;
-		if ((rc = alloc_request(fsg, fsg->bulk_out, &bh->outreq)) != 0)
-			goto reset;
-		bh->inreq->buf = bh->outreq->buf = bh->buf;
-		bh->inreq->context = bh->outreq->context = bh;
-		bh->inreq->complete = bulk_in_complete;
-		bh->outreq->complete = bulk_out_complete;
-	}
-	if (transport_is_cbi()) {
-		if ((rc = alloc_request(fsg, fsg->intr_in, &fsg->intreq)) != 0)
-			goto reset;
-		fsg->intreq->complete = intr_in_complete;
-	}
-
-	fsg->running = 1;
-	for (i = 0; i < fsg->nluns; ++i)
-		fsg->luns[i].unit_attention_data = SS_RESET_OCCURRED;
-	return rc;
-}
-
-
-/*
- * Change our operational configuration.  This code must agree with the code
- * that returns config descriptors, and with interface altsetting code.
- *
- * It's also responsible for power management interactions.  Some
- * configurations might not work with our current power sources.
- * For now we just assume the gadget is always self-powered.
- */
-static int do_set_config(struct fsg_dev *fsg, u8 new_config)
-{
-	int	rc = 0;
-
-	/* Disable the single interface */
-	if (fsg->config != 0) {
-		DBG(fsg, "reset config\n");
-		fsg->config = 0;
-		rc = do_set_interface(fsg, -1);
-	}
-
-	/* Enable the interface */
-	if (new_config != 0) {
-		fsg->config = new_config;
-		if ((rc = do_set_interface(fsg, 0)) != 0)
-			fsg->config = 0;	// Reset on errors
-		else
-			INFO(fsg, "%s config #%d\n",
-			     usb_speed_string(fsg->gadget->speed),
-			     fsg->config);
-	}
-	return rc;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-static void handle_exception(struct fsg_dev *fsg)
-{
-	siginfo_t		info;
-	int			sig;
-	int			i;
-	int			num_active;
-	struct fsg_buffhd	*bh;
-	enum fsg_state		old_state;
-	u8			new_config;
-	struct fsg_lun		*curlun;
-	unsigned int		exception_req_tag;
-	int			rc;
-
-	/* Clear the existing signals.  Anything but SIGUSR1 is converted
-	 * into a high-priority EXIT exception. */
-	for (;;) {
-		sig = dequeue_signal_lock(current, &current->blocked, &info);
-		if (!sig)
-			break;
-		if (sig != SIGUSR1) {
-			if (fsg->state < FSG_STATE_EXIT)
-				DBG(fsg, "Main thread exiting on signal\n");
-			raise_exception(fsg, FSG_STATE_EXIT);
-		}
-	}
-
-	/* Cancel all the pending transfers */
-	if (fsg->intreq_busy)
-		usb_ep_dequeue(fsg->intr_in, fsg->intreq);
-	for (i = 0; i < fsg_num_buffers; ++i) {
-		bh = &fsg->buffhds[i];
-		if (bh->inreq_busy)
-			usb_ep_dequeue(fsg->bulk_in, bh->inreq);
-		if (bh->outreq_busy)
-			usb_ep_dequeue(fsg->bulk_out, bh->outreq);
-	}
-
-	/* Wait until everything is idle */
-	for (;;) {
-		num_active = fsg->intreq_busy;
-		for (i = 0; i < fsg_num_buffers; ++i) {
-			bh = &fsg->buffhds[i];
-			num_active += bh->inreq_busy + bh->outreq_busy;
-		}
-		if (num_active == 0)
-			break;
-		if (sleep_thread(fsg))
-			return;
-	}
-
-	/* Clear out the controller's fifos */
-	if (fsg->bulk_in_enabled)
-		usb_ep_fifo_flush(fsg->bulk_in);
-	if (fsg->bulk_out_enabled)
-		usb_ep_fifo_flush(fsg->bulk_out);
-	if (fsg->intr_in_enabled)
-		usb_ep_fifo_flush(fsg->intr_in);
-
-	/* Reset the I/O buffer states and pointers, the SCSI
-	 * state, and the exception.  Then invoke the handler. */
-	spin_lock_irq(&fsg->lock);
-
-	for (i = 0; i < fsg_num_buffers; ++i) {
-		bh = &fsg->buffhds[i];
-		bh->state = BUF_STATE_EMPTY;
-	}
-	fsg->next_buffhd_to_fill = fsg->next_buffhd_to_drain =
-			&fsg->buffhds[0];
-
-	exception_req_tag = fsg->exception_req_tag;
-	new_config = fsg->new_config;
-	old_state = fsg->state;
-
-	if (old_state == FSG_STATE_ABORT_BULK_OUT)
-		fsg->state = FSG_STATE_STATUS_PHASE;
-	else {
-		for (i = 0; i < fsg->nluns; ++i) {
-			curlun = &fsg->luns[i];
-			curlun->prevent_medium_removal = 0;
-			curlun->sense_data = curlun->unit_attention_data =
-					SS_NO_SENSE;
-			curlun->sense_data_info = 0;
-			curlun->info_valid = 0;
-		}
-		fsg->state = FSG_STATE_IDLE;
-	}
-	spin_unlock_irq(&fsg->lock);
-
-	/* Carry out any extra actions required for the exception */
-	switch (old_state) {
-	default:
-		break;
-
-	case FSG_STATE_ABORT_BULK_OUT:
-		send_status(fsg);
-		spin_lock_irq(&fsg->lock);
-		if (fsg->state == FSG_STATE_STATUS_PHASE)
-			fsg->state = FSG_STATE_IDLE;
-		spin_unlock_irq(&fsg->lock);
-		break;
-
-	case FSG_STATE_RESET:
-		/* In case we were forced against our will to halt a
-		 * bulk endpoint, clear the halt now.  (The SuperH UDC
-		 * requires this.) */
-		if (test_and_clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags))
-			usb_ep_clear_halt(fsg->bulk_in);
-
-		if (transport_is_bbb()) {
-			if (fsg->ep0_req_tag == exception_req_tag)
-				ep0_queue(fsg);	// Complete the status stage
-
-		} else if (transport_is_cbi())
-			send_status(fsg);	// Status by interrupt pipe
-
-		/* Technically this should go here, but it would only be
-		 * a waste of time.  Ditto for the INTERFACE_CHANGE and
-		 * CONFIG_CHANGE cases. */
-		// for (i = 0; i < fsg->nluns; ++i)
-		//	fsg->luns[i].unit_attention_data = SS_RESET_OCCURRED;
-		break;
-
-	case FSG_STATE_INTERFACE_CHANGE:
-		rc = do_set_interface(fsg, 0);
-		if (fsg->ep0_req_tag != exception_req_tag)
-			break;
-		if (rc != 0)			// STALL on errors
-			fsg_set_halt(fsg, fsg->ep0);
-		else				// Complete the status stage
-			ep0_queue(fsg);
-		break;
-
-	case FSG_STATE_CONFIG_CHANGE:
-		rc = do_set_config(fsg, new_config);
-		if (fsg->ep0_req_tag != exception_req_tag)
-			break;
-		if (rc != 0)			// STALL on errors
-			fsg_set_halt(fsg, fsg->ep0);
-		else				// Complete the status stage
-			ep0_queue(fsg);
-		break;
-
-	case FSG_STATE_DISCONNECT:
-		for (i = 0; i < fsg->nluns; ++i)
-			fsg_lun_fsync_sub(fsg->luns + i);
-		do_set_config(fsg, 0);		// Unconfigured state
-		break;
-
-	case FSG_STATE_EXIT:
-	case FSG_STATE_TERMINATED:
-		do_set_config(fsg, 0);			// Free resources
-		spin_lock_irq(&fsg->lock);
-		fsg->state = FSG_STATE_TERMINATED;	// Stop the thread
-		spin_unlock_irq(&fsg->lock);
-		break;
-	}
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-static int fsg_main_thread(void *fsg_)
-{
-	struct fsg_dev		*fsg = fsg_;
-
-	/* Allow the thread to be killed by a signal, but set the signal mask
-	 * to block everything but INT, TERM, KILL, and USR1. */
-	allow_signal(SIGINT);
-	allow_signal(SIGTERM);
-	allow_signal(SIGKILL);
-	allow_signal(SIGUSR1);
-
-	/* Allow the thread to be frozen */
-	set_freezable();
-
-	/* Arrange for userspace references to be interpreted as kernel
-	 * pointers.  That way we can pass a kernel pointer to a routine
-	 * that expects a __user pointer and it will work okay. */
-	set_fs(get_ds());
-
-	/* The main loop */
-	while (fsg->state != FSG_STATE_TERMINATED) {
-		if (exception_in_progress(fsg) || signal_pending(current)) {
-			handle_exception(fsg);
-			continue;
-		}
-
-		if (!fsg->running) {
-			sleep_thread(fsg);
-			continue;
-		}
-
-		if (get_next_command(fsg))
-			continue;
-
-		spin_lock_irq(&fsg->lock);
-		if (!exception_in_progress(fsg))
-			fsg->state = FSG_STATE_DATA_PHASE;
-		spin_unlock_irq(&fsg->lock);
-
-		if (do_scsi_command(fsg) || finish_reply(fsg))
-			continue;
-
-		spin_lock_irq(&fsg->lock);
-		if (!exception_in_progress(fsg))
-			fsg->state = FSG_STATE_STATUS_PHASE;
-		spin_unlock_irq(&fsg->lock);
-
-		if (send_status(fsg))
-			continue;
-
-		spin_lock_irq(&fsg->lock);
-		if (!exception_in_progress(fsg))
-			fsg->state = FSG_STATE_IDLE;
-		spin_unlock_irq(&fsg->lock);
-		}
-
-	spin_lock_irq(&fsg->lock);
-	fsg->thread_task = NULL;
-	spin_unlock_irq(&fsg->lock);
-
-	/* If we are exiting because of a signal, unregister the
-	 * gadget driver. */
-	if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags))
-		usb_gadget_unregister_driver(&fsg_driver);
-
-	/* Let the unbind and cleanup routines know the thread has exited */
-	complete_and_exit(&fsg->thread_notifier, 0);
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-
-/* The write permissions and store_xxx pointers are set in fsg_bind() */
-static DEVICE_ATTR(ro, 0444, fsg_show_ro, NULL);
-static DEVICE_ATTR(nofua, 0644, fsg_show_nofua, NULL);
-static DEVICE_ATTR(file, 0444, fsg_show_file, NULL);
-
-
-/*-------------------------------------------------------------------------*/
-
-static void fsg_release(struct kref *ref)
-{
-	struct fsg_dev	*fsg = container_of(ref, struct fsg_dev, ref);
-
-	kfree(fsg->luns);
-	kfree(fsg);
-}
-
-static void lun_release(struct device *dev)
-{
-	struct rw_semaphore	*filesem = dev_get_drvdata(dev);
-	struct fsg_dev		*fsg =
-		container_of(filesem, struct fsg_dev, filesem);
-
-	kref_put(&fsg->ref, fsg_release);
-}
-
-static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget)
-{
-	struct fsg_dev		*fsg = get_gadget_data(gadget);
-	int			i;
-	struct fsg_lun		*curlun;
-	struct usb_request	*req = fsg->ep0req;
-
-	DBG(fsg, "unbind\n");
-	clear_bit(REGISTERED, &fsg->atomic_bitflags);
-
-	/* If the thread isn't already dead, tell it to exit now */
-	if (fsg->state != FSG_STATE_TERMINATED) {
-		raise_exception(fsg, FSG_STATE_EXIT);
-		wait_for_completion(&fsg->thread_notifier);
-
-		/* The cleanup routine waits for this completion also */
-		complete(&fsg->thread_notifier);
-	}
-
-	/* Unregister the sysfs attribute files and the LUNs */
-	for (i = 0; i < fsg->nluns; ++i) {
-		curlun = &fsg->luns[i];
-		if (curlun->registered) {
-			device_remove_file(&curlun->dev, &dev_attr_nofua);
-			device_remove_file(&curlun->dev, &dev_attr_ro);
-			device_remove_file(&curlun->dev, &dev_attr_file);
-			fsg_lun_close(curlun);
-			device_unregister(&curlun->dev);
-			curlun->registered = 0;
-		}
-	}
-
-	/* Free the data buffers */
-	for (i = 0; i < fsg_num_buffers; ++i)
-		kfree(fsg->buffhds[i].buf);
-
-	/* Free the request and buffer for endpoint 0 */
-	if (req) {
-		kfree(req->buf);
-		usb_ep_free_request(fsg->ep0, req);
-	}
-
-	set_gadget_data(gadget, NULL);
-}
-
-
-static int __init check_parameters(struct fsg_dev *fsg)
-{
-	int	prot;
-
-	/* Store the default values */
-	mod_data.transport_type = USB_PR_BULK;
-	mod_data.transport_name = "Bulk-only";
-	mod_data.protocol_type = USB_SC_SCSI;
-	mod_data.protocol_name = "Transparent SCSI";
-
-	/* Some peripheral controllers are known not to be able to
-	 * halt bulk endpoints correctly.  If one of them is present,
-	 * disable stalls.
-	 */
-	if (gadget_is_at91(fsg->gadget))
-		mod_data.can_stall = 0;
-
-	if (mod_data.release == 0xffff)
-		mod_data.release = get_default_bcdDevice();
-
-	prot = simple_strtol(mod_data.protocol_parm, NULL, 0);
-
-#ifdef CONFIG_USB_FILE_STORAGE_TEST
-	if (strnicmp(mod_data.transport_parm, "BBB", 10) == 0) {
-		;		// Use default setting
-	} else if (strnicmp(mod_data.transport_parm, "CB", 10) == 0) {
-		mod_data.transport_type = USB_PR_CB;
-		mod_data.transport_name = "Control-Bulk";
-	} else if (strnicmp(mod_data.transport_parm, "CBI", 10) == 0) {
-		mod_data.transport_type = USB_PR_CBI;
-		mod_data.transport_name = "Control-Bulk-Interrupt";
-	} else {
-		ERROR(fsg, "invalid transport: %s\n", mod_data.transport_parm);
-		return -EINVAL;
-	}
-
-	if (strnicmp(mod_data.protocol_parm, "SCSI", 10) == 0 ||
-			prot == USB_SC_SCSI) {
-		;		// Use default setting
-	} else if (strnicmp(mod_data.protocol_parm, "RBC", 10) == 0 ||
-			prot == USB_SC_RBC) {
-		mod_data.protocol_type = USB_SC_RBC;
-		mod_data.protocol_name = "RBC";
-	} else if (strnicmp(mod_data.protocol_parm, "8020", 4) == 0 ||
-			strnicmp(mod_data.protocol_parm, "ATAPI", 10) == 0 ||
-			prot == USB_SC_8020) {
-		mod_data.protocol_type = USB_SC_8020;
-		mod_data.protocol_name = "8020i (ATAPI)";
-	} else if (strnicmp(mod_data.protocol_parm, "QIC", 3) == 0 ||
-			prot == USB_SC_QIC) {
-		mod_data.protocol_type = USB_SC_QIC;
-		mod_data.protocol_name = "QIC-157";
-	} else if (strnicmp(mod_data.protocol_parm, "UFI", 10) == 0 ||
-			prot == USB_SC_UFI) {
-		mod_data.protocol_type = USB_SC_UFI;
-		mod_data.protocol_name = "UFI";
-	} else if (strnicmp(mod_data.protocol_parm, "8070", 4) == 0 ||
-			prot == USB_SC_8070) {
-		mod_data.protocol_type = USB_SC_8070;
-		mod_data.protocol_name = "8070i";
-	} else {
-		ERROR(fsg, "invalid protocol: %s\n", mod_data.protocol_parm);
-		return -EINVAL;
-	}
-
-	mod_data.buflen &= PAGE_CACHE_MASK;
-	if (mod_data.buflen <= 0) {
-		ERROR(fsg, "invalid buflen\n");
-		return -ETOOSMALL;
-	}
-
-#endif /* CONFIG_USB_FILE_STORAGE_TEST */
-
-	/* Serial string handling.
-	 * On a real device, the serial string would be loaded
-	 * from permanent storage. */
-	if (mod_data.serial) {
-		const char *ch;
-		unsigned len = 0;
-
-		/* Sanity check :
-		 * The CB[I] specification limits the serial string to
-		 * 12 uppercase hexadecimal characters.
-		 * BBB need at least 12 uppercase hexadecimal characters,
-		 * with a maximum of 126. */
-		for (ch = mod_data.serial; *ch; ++ch) {
-			++len;
-			if ((*ch < '0' || *ch > '9') &&
-			    (*ch < 'A' || *ch > 'F')) { /* not uppercase hex */
-				WARNING(fsg,
-					"Invalid serial string character: %c\n",
-					*ch);
-				goto no_serial;
-			}
-		}
-		if (len > 126 ||
-		    (mod_data.transport_type == USB_PR_BULK && len < 12) ||
-		    (mod_data.transport_type != USB_PR_BULK && len > 12)) {
-			WARNING(fsg, "Invalid serial string length!\n");
-			goto no_serial;
-		}
-		fsg_strings[FSG_STRING_SERIAL - 1].s = mod_data.serial;
-	} else {
-		WARNING(fsg, "No serial-number string provided!\n");
- no_serial:
-		device_desc.iSerialNumber = 0;
-	}
-
-	return 0;
-}
-
-
-static int __init fsg_bind(struct usb_gadget *gadget,
-		struct usb_gadget_driver *driver)
-{
-	struct fsg_dev		*fsg = the_fsg;
-	int			rc;
-	int			i;
-	struct fsg_lun		*curlun;
-	struct usb_ep		*ep;
-	struct usb_request	*req;
-	char			*pathbuf, *p;
-
-	fsg->gadget = gadget;
-	set_gadget_data(gadget, fsg);
-	fsg->ep0 = gadget->ep0;
-	fsg->ep0->driver_data = fsg;
-
-	if ((rc = check_parameters(fsg)) != 0)
-		goto out;
-
-	if (mod_data.removable) {	// Enable the store_xxx attributes
-		dev_attr_file.attr.mode = 0644;
-		dev_attr_file.store = fsg_store_file;
-		if (!mod_data.cdrom) {
-			dev_attr_ro.attr.mode = 0644;
-			dev_attr_ro.store = fsg_store_ro;
-		}
-	}
-
-	/* Only for removable media? */
-	dev_attr_nofua.attr.mode = 0644;
-	dev_attr_nofua.store = fsg_store_nofua;
-
-	/* Find out how many LUNs there should be */
-	i = mod_data.nluns;
-	if (i == 0)
-		i = max(mod_data.num_filenames, 1u);
-	if (i > FSG_MAX_LUNS) {
-		ERROR(fsg, "invalid number of LUNs: %d\n", i);
-		rc = -EINVAL;
-		goto out;
-	}
-
-	/* Create the LUNs, open their backing files, and register the
-	 * LUN devices in sysfs. */
-	fsg->luns = kzalloc(i * sizeof(struct fsg_lun), GFP_KERNEL);
-	if (!fsg->luns) {
-		rc = -ENOMEM;
-		goto out;
-	}
-	fsg->nluns = i;
-
-	for (i = 0; i < fsg->nluns; ++i) {
-		curlun = &fsg->luns[i];
-		curlun->cdrom = !!mod_data.cdrom;
-		curlun->ro = mod_data.cdrom || mod_data.ro[i];
-		curlun->initially_ro = curlun->ro;
-		curlun->removable = mod_data.removable;
-		curlun->nofua = mod_data.nofua[i];
-		curlun->dev.release = lun_release;
-		curlun->dev.parent = &gadget->dev;
-		curlun->dev.driver = &fsg_driver.driver;
-		dev_set_drvdata(&curlun->dev, &fsg->filesem);
-		dev_set_name(&curlun->dev,"%s-lun%d",
-			     dev_name(&gadget->dev), i);
-
-		kref_get(&fsg->ref);
-		rc = device_register(&curlun->dev);
-		if (rc) {
-			INFO(fsg, "failed to register LUN%d: %d\n", i, rc);
-			put_device(&curlun->dev);
-			goto out;
-		}
-		curlun->registered = 1;
-
-		rc = device_create_file(&curlun->dev, &dev_attr_ro);
-		if (rc)
-			goto out;
-		rc = device_create_file(&curlun->dev, &dev_attr_nofua);
-		if (rc)
-			goto out;
-		rc = device_create_file(&curlun->dev, &dev_attr_file);
-		if (rc)
-			goto out;
-
-		if (mod_data.file[i] && *mod_data.file[i]) {
-			rc = fsg_lun_open(curlun, mod_data.file[i]);
-			if (rc)
-				goto out;
-		} else if (!mod_data.removable) {
-			ERROR(fsg, "no file given for LUN%d\n", i);
-			rc = -EINVAL;
-			goto out;
-		}
-	}
-
-	/* Find all the endpoints we will use */
-	usb_ep_autoconfig_reset(gadget);
-	ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_in_desc);
-	if (!ep)
-		goto autoconf_fail;
-	ep->driver_data = fsg;		// claim the endpoint
-	fsg->bulk_in = ep;
-
-	ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_out_desc);
-	if (!ep)
-		goto autoconf_fail;
-	ep->driver_data = fsg;		// claim the endpoint
-	fsg->bulk_out = ep;
-
-	if (transport_is_cbi()) {
-		ep = usb_ep_autoconfig(gadget, &fsg_fs_intr_in_desc);
-		if (!ep)
-			goto autoconf_fail;
-		ep->driver_data = fsg;		// claim the endpoint
-		fsg->intr_in = ep;
-	}
-
-	/* Fix up the descriptors */
-	device_desc.idVendor = cpu_to_le16(mod_data.vendor);
-	device_desc.idProduct = cpu_to_le16(mod_data.product);
-	device_desc.bcdDevice = cpu_to_le16(mod_data.release);
-
-	i = (transport_is_cbi() ? 3 : 2);	// Number of endpoints
-	fsg_intf_desc.bNumEndpoints = i;
-	fsg_intf_desc.bInterfaceSubClass = mod_data.protocol_type;
-	fsg_intf_desc.bInterfaceProtocol = mod_data.transport_type;
-	fsg_fs_function[i + FSG_FS_FUNCTION_PRE_EP_ENTRIES] = NULL;
-
-	if (gadget_is_dualspeed(gadget)) {
-		fsg_hs_function[i + FSG_HS_FUNCTION_PRE_EP_ENTRIES] = NULL;
-
-		/* Assume endpoint addresses are the same for both speeds */
-		fsg_hs_bulk_in_desc.bEndpointAddress =
-			fsg_fs_bulk_in_desc.bEndpointAddress;
-		fsg_hs_bulk_out_desc.bEndpointAddress =
-			fsg_fs_bulk_out_desc.bEndpointAddress;
-		fsg_hs_intr_in_desc.bEndpointAddress =
-			fsg_fs_intr_in_desc.bEndpointAddress;
-	}
-
-	if (gadget_is_superspeed(gadget)) {
-		unsigned		max_burst;
-
-		fsg_ss_function[i + FSG_SS_FUNCTION_PRE_EP_ENTRIES] = NULL;
-
-		/* Calculate bMaxBurst, we know packet size is 1024 */
-		max_burst = min_t(unsigned, mod_data.buflen / 1024, 15);
-
-		/* Assume endpoint addresses are the same for both speeds */
-		fsg_ss_bulk_in_desc.bEndpointAddress =
-			fsg_fs_bulk_in_desc.bEndpointAddress;
-		fsg_ss_bulk_in_comp_desc.bMaxBurst = max_burst;
-
-		fsg_ss_bulk_out_desc.bEndpointAddress =
-			fsg_fs_bulk_out_desc.bEndpointAddress;
-		fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst;
-	}
-
-	if (gadget_is_otg(gadget))
-		fsg_otg_desc.bmAttributes |= USB_OTG_HNP;
-
-	rc = -ENOMEM;
-
-	/* Allocate the request and buffer for endpoint 0 */
-	fsg->ep0req = req = usb_ep_alloc_request(fsg->ep0, GFP_KERNEL);
-	if (!req)
-		goto out;
-	req->buf = kmalloc(EP0_BUFSIZE, GFP_KERNEL);
-	if (!req->buf)
-		goto out;
-	req->complete = ep0_complete;
-
-	/* Allocate the data buffers */
-	for (i = 0; i < fsg_num_buffers; ++i) {
-		struct fsg_buffhd	*bh = &fsg->buffhds[i];
-
-		/* Allocate for the bulk-in endpoint.  We assume that
-		 * the buffer will also work with the bulk-out (and
-		 * interrupt-in) endpoint. */
-		bh->buf = kmalloc(mod_data.buflen, GFP_KERNEL);
-		if (!bh->buf)
-			goto out;
-		bh->next = bh + 1;
-	}
-	fsg->buffhds[fsg_num_buffers - 1].next = &fsg->buffhds[0];
-
-	/* This should reflect the actual gadget power source */
-	usb_gadget_set_selfpowered(gadget);
-
-	snprintf(fsg_string_manufacturer, sizeof fsg_string_manufacturer,
-			"%s %s with %s",
-			init_utsname()->sysname, init_utsname()->release,
-			gadget->name);
-
-	fsg->thread_task = kthread_create(fsg_main_thread, fsg,
-			"file-storage-gadget");
-	if (IS_ERR(fsg->thread_task)) {
-		rc = PTR_ERR(fsg->thread_task);
-		goto out;
-	}
-
-	INFO(fsg, DRIVER_DESC ", version: " DRIVER_VERSION "\n");
-	INFO(fsg, "NOTE: This driver is deprecated.  "
-			"Consider using g_mass_storage instead.\n");
-	INFO(fsg, "Number of LUNs=%d\n", fsg->nluns);
-
-	pathbuf = kmalloc(PATH_MAX, GFP_KERNEL);
-	for (i = 0; i < fsg->nluns; ++i) {
-		curlun = &fsg->luns[i];
-		if (fsg_lun_is_open(curlun)) {
-			p = NULL;
-			if (pathbuf) {
-				p = d_path(&curlun->filp->f_path,
-					   pathbuf, PATH_MAX);
-				if (IS_ERR(p))
-					p = NULL;
-			}
-			LINFO(curlun, "ro=%d, nofua=%d, file: %s\n",
-			      curlun->ro, curlun->nofua, (p ? p : "(error)"));
-		}
-	}
-	kfree(pathbuf);
-
-	DBG(fsg, "transport=%s (x%02x)\n",
-			mod_data.transport_name, mod_data.transport_type);
-	DBG(fsg, "protocol=%s (x%02x)\n",
-			mod_data.protocol_name, mod_data.protocol_type);
-	DBG(fsg, "VendorID=x%04x, ProductID=x%04x, Release=x%04x\n",
-			mod_data.vendor, mod_data.product, mod_data.release);
-	DBG(fsg, "removable=%d, stall=%d, cdrom=%d, buflen=%u\n",
-			mod_data.removable, mod_data.can_stall,
-			mod_data.cdrom, mod_data.buflen);
-	DBG(fsg, "I/O thread pid: %d\n", task_pid_nr(fsg->thread_task));
-
-	set_bit(REGISTERED, &fsg->atomic_bitflags);
-
-	/* Tell the thread to start working */
-	wake_up_process(fsg->thread_task);
-	return 0;
-
-autoconf_fail:
-	ERROR(fsg, "unable to autoconfigure all endpoints\n");
-	rc = -ENOTSUPP;
-
-out:
-	fsg->state = FSG_STATE_TERMINATED;	// The thread is dead
-	fsg_unbind(gadget);
-	complete(&fsg->thread_notifier);
-	return rc;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-static void fsg_suspend(struct usb_gadget *gadget)
-{
-	struct fsg_dev		*fsg = get_gadget_data(gadget);
-
-	DBG(fsg, "suspend\n");
-	set_bit(SUSPENDED, &fsg->atomic_bitflags);
-}
-
-static void fsg_resume(struct usb_gadget *gadget)
-{
-	struct fsg_dev		*fsg = get_gadget_data(gadget);
-
-	DBG(fsg, "resume\n");
-	clear_bit(SUSPENDED, &fsg->atomic_bitflags);
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-static __refdata struct usb_gadget_driver		fsg_driver = {
-	.max_speed	= USB_SPEED_SUPER,
-	.function	= (char *) fsg_string_product,
-	.bind		= fsg_bind,
-	.unbind		= fsg_unbind,
-	.disconnect	= fsg_disconnect,
-	.setup		= fsg_setup,
-	.suspend	= fsg_suspend,
-	.resume		= fsg_resume,
-
-	.driver		= {
-		.name		= DRIVER_NAME,
-		.owner		= THIS_MODULE,
-		// .release = ...
-		// .suspend = ...
-		// .resume = ...
-	},
-};
-
-
-static int __init fsg_alloc(void)
-{
-	struct fsg_dev		*fsg;
-
-	fsg = kzalloc(sizeof *fsg +
-		      fsg_num_buffers * sizeof *(fsg->buffhds), GFP_KERNEL);
-
-	if (!fsg)
-		return -ENOMEM;
-	spin_lock_init(&fsg->lock);
-	init_rwsem(&fsg->filesem);
-	kref_init(&fsg->ref);
-	init_completion(&fsg->thread_notifier);
-
-	the_fsg = fsg;
-	return 0;
-}
-
-
-static int __init fsg_init(void)
-{
-	int		rc;
-	struct fsg_dev	*fsg;
-
-	rc = fsg_num_buffers_validate();
-	if (rc != 0)
-		return rc;
-
-	if ((rc = fsg_alloc()) != 0)
-		return rc;
-	fsg = the_fsg;
-	rc = usb_gadget_probe_driver(&fsg_driver);
-	if (rc != 0)
-		kref_put(&fsg->ref, fsg_release);
-	return rc;
-}
-module_init(fsg_init);
-
-
-static void __exit fsg_cleanup(void)
-{
-	struct fsg_dev	*fsg = the_fsg;
-
-	/* Unregister the driver iff the thread hasn't already done so */
-	if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags))
-		usb_gadget_unregister_driver(&fsg_driver);
-
-	/* Wait for the thread to finish up */
-	wait_for_completion(&fsg->thread_notifier);
-
-	kref_put(&fsg->ref, fsg_release);
-}
-module_exit(fsg_cleanup);
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index ac335af154ba..708c0b55dcc8 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -9,7 +9,7 @@
  * CODE STATUS HIGHLIGHTS
  *
  * This driver should work well with most "gadget" drivers, including
- * the File Storage, Serial, and Ethernet/RNDIS gadget drivers
+ * the Mass Storage, Serial, and Ethernet/RNDIS gadget drivers
  * as well as Gadget Zero and Gadgetfs.
  *
  * DMA is enabled by default.  Drivers using transfer queues might use
diff --git a/drivers/usb/gadget/pxa27x_udc.h b/drivers/usb/gadget/pxa27x_udc.h
index a1d268c6f2cc..79d81a4b2344 100644
--- a/drivers/usb/gadget/pxa27x_udc.h
+++ b/drivers/usb/gadget/pxa27x_udc.h
@@ -418,7 +418,7 @@ struct udc_stats {
  * @irq: udc irq
  * @clk: udc clock
  * @usb_gadget: udc gadget structure
- * @driver: bound gadget (zero, g_ether, g_file_storage, ...)
+ * @driver: bound gadget (zero, g_ether, g_mass_storage, ...)
  * @dev: device
  * @mach: machine info, used to activate specific GPIO
  * @transceiver: external transceiver to handle vbus sense and D+ pullup